Database Info

[ROM] [Froyo] AhmgskMod FroyoSenseV1 [9th July]

1st Of all Thanks to DJ Droid For Rom + Radio
+++++++++++++++++++++++++++++++++++
And Then Thanks To Paul, and Others For Root and Hacks
+++++++++++++++++++++++++++++++++++++++++++
And Last But Not The Least Thanks To U ALL
++++++++++++++++++++++++++++++++++​
Disclaimer:
============
I M Not Responsible For Any Damage Caused To U Or Ur Phone While Using This Release
Welcome To Froyo Sense Version 1
Its based on Dj Droids Froyo sense release V1R1 (Leak Build 2.04.0.0 FRF85B). I have Performed many Optimizations to Rom. I didnot find it to be causing problem But if u find anything Strange in the Rom i.e. Sudden Lag or Force Closes Let me know ASAP.
My computer is Not working i m using my friends Computer, which is with me Only for today. So Testers Be little quick In reviewing the Rom.
battery consumption in Wifi Tether (HTC HOTSPOT) is very High, untill Htc Sources of Kernel are out i would Avoid to work on it.
Details Of Rom:
Everything kept Stock (Extreme Stock)
If this goes good I will release a LITE version too + NON SENSE version all in this post itself
Camcorder supports is 720p
Wifi n Usb Tether Works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 357118
View attachment 357116
Requirement for This Rom:
Rooted Desire
Radio -> 32.41.00.32U_5.08.00.04 -> Installation Process Given In Post 2
How to Flash:
Detail Given In 2nd Post
U can Use My Fake Flash Recovery
BenchMark using diff softwares:
Given in 3rd Post
Download:
FroyoSense V1
My Desire Spec:
BRAVO UNKNOWN SHIP S-ON
HBOOT - 0.75.0000
TOUCH PANEL-SYNT0101
RADIO - 5.08.00.04
Mar 5 2010,21:12:15

How To Flash
Please Note U Need to Have ROOTED DESIRE
If u Already Have Rooted Proceed:
Step 1: Starting Recovery
Download Fake Flash Recovery
Copy it to Root of ur Sd-Card (Root means Main folder)
Turn Off Ur Device
Holding VolumeDown key Press Power key -> u will see white screen With Details of ur device written
Now navigate to Recovery using volume keys and press Power key to select it
Phone will reboot and u will see red triangle with '!' Mark
hold volume up key + power key -> you will see menu
now navigate to Flash update.zip and select using power Key
Recovery will Start
STEP 2: Flashing Rom
You Will have to Clear Rom Data First so
Navigate to WIPE using optical trackball and select using press of optical trackball
Wipe Data/factory rest
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery stats
Wipe Rotate setting
Now Go Back to Main Menu using Volume Down Key
Navigate to USB-MS toggle turn on usb (if u dont have the rom pasted in Sd card root directory)
Paste the rom in Root of directory
Now Navigate to Flash zip from Sdcard -> flash the rom following instructions on screen
IF U HAVE 5.08.00.04 Radio U can reboot and Continue With setting ur Device if u dont go to Step 3
Step 3: Flashing Radio
Navigate to USB-Ms Toogle and paste 32.41.00.32U_5.08.00.04.zip in root of Sd-card
Now Navigate to Flash zip from sdcard
Select 32.41.00.32U_5.08.00.04.zip use trackball to confirm it
now it will ask you to press volumeup + volumedown or press menu key to flash radio press it.
now leave your device do not disturb it (if u disturb it u might brick Ur desire)
it will reboot 2 times (i think if more dont worry) 1 time it will be similar to recovery flashing
once it reboots it will directly lead to rom setup wizard
Enjoy
NOTE:
In complete recovery navigation is done with trackball selection is done by trackball and to go back use volume down key
its better to keep battery Above 50% before flashing radio
memory card should not have any partitions only FAT32

I have used 4 softwares to compare benchmarks
-> as compared to N1 ported Froyo Rom it is very comparative You can compare them ur self i m posting Software names + benchmarks i got with screen shot below:
1. Quadrant Standard
View attachment 357145
2 Linpack For Android
View attachment 357146
3. Neocore with sound ON
4. NenaMark1
a.With No sound 13.1 fps
View attachment 357148
b. With Sound 12.2 fps
All these Softwares are available in Market as For free
Enjoy And report All Bugs and Lags and FC

First here
Thank you.

What are the differences between your ROM and udks?

Trying out right now - seems nice so far

Now everybody is coming with a Sense 2.2 ROM

What's in your ROM? (apps)

493560326 said:
What are the differences between your ROM and udks?
Click to expand...
Click to collapse
Same question. So far I can say it has less RAM consumption.
Wonder if you can have OCUV for the kernel?

My dear ROM COOKER
Are U here?
There is a Mr.Question who wants to know your ROM

493560326 said:
My dear ROM COOKER
Are U here?
There is a Mr.Question who wants to know your ROM
Click to expand...
Click to collapse
yes sir i m here
as i wrote in my 1st post it has all htc apps if this version runs with good speed and without fc i will make a lite version without useless htc apps
i just wanna know my optimizations didnot break anything or it did
if did i will work on work around

OK
Maybe I'll just be waiting for the light ROM
That's what I want most

Sorry but I have a quick noob question. Can't you just remove the .apk files from the zip file before you install it?

Why did you stop using ROM Manager?
I can't even find your old ROM's...
Sent from my HTC Desire using XDA App

Please can you make rom without HTC Sense and other HTC Stuff
Thanks in advance

old app2sd (ext3 partition) is present?

thank you ... downloading .... this one don't have unknown reason reboot ?

flashed the ROM....
will give feedback a little later....
btw: the annoying bootsound is there.....please can you remove that from the rom......I think many people don't like that...

how do i get around the simlock when i flash this radio
am an orange uk user

goges said:
thank you ... downloading .... this one don't have unknown reason reboot ?
Click to expand...
Click to collapse
non experienced by me
toosif said:
flashed the ROM....
will give feedback a little later....
btw: the annoying bootsound is there.....please can you remove that from the rom......I think many people don't like that...
Click to expand...
Click to collapse
yes it was kept as stock as i could if this goes perfect i m preparing for lite version with everything lite
u can say this is pre-release

Perfect peso for lg p350

PERFECT PESO ROM NO BUGS............................
THIS ROM IS MODIFIED FOR BEST GAMING
MIUI TRANSLATIONS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VIDEO OF THE PESO ROM http://www.youtube.com/watch?v=n2nvQzZ-UNI&feature=youtu.be
THE DOWNLOAD LINK IS http://www.mediafire.com/?uga1ki68877w5lc
SORRY FOR THE PATCH FORGET TO ADD VIDEO PLAYER FLASH http://www.mediafire.com/?j2jrpwvjw66wlz9
IT IS A FAST ROM AND GIVES BEST BATTERY BACKUP
WORKING
EVERY THING IS WORKING NO MORE BUGS
NOT WORKING
1.headset button
HOW TO INSTALL
1.DOWNLOAD
2.MAKE A BAUCKUP IF NEEDED
3.MOVE DOWNLOADS TO SD
4.GET TO RECOVERY MOD
5.FLASH THIS ONE BY ONE
6.wipe/data
AND ENJOY THE ROM
ANY DOUBTS U CAN CONTACT ME AT MY FACEBOOK
IF U LIKE MY WORK DON'T FORGET TO SAY THANKS NOT RESTRICTION
MY PROJECTS ARE
XPERIA ARC FOR LG P500
HONEYCOMB FROM CIPS AND BUGS RECTIFIED FROM ME
XPERIA ARC FOR LG P350
PERFECT PESO
COSMIC EXPERIA 2.3.7 FROM COMPILED SOURCE
cm7.2 PURE GINGERBREAD 2.3.7 COMPILED FORM SOURCES
TRANSITION THEMES FOR LG P350 AND P500
THE CENTER CLOCK STATUS BAR FOR ALL ROMS
OR U CAN JOIN OUR GROUP OF OPTIMUS ME P350 DEVELOPMENT ON FACEBOOK

How do I get this on my phone? No idea where to start

404ninja said:
How do I get this on my phone? No idea where to start
Click to expand...
Click to collapse
first u have to root and have to flash amonra recovery follow this link http://androidforums.com/p350-all-things-root/484614-how-flash-clockworkmod-recovery-lg-p350.html

This looks quite similar to the Cosmic Experia ROM!!

lalitindoria said:
This looks quite similar to the Cosmic Experia ROM!!
Click to expand...
Click to collapse
but the optioning and way of transition and every thing is different from cosmic and this have the better perfomance than other even with battery backup

Really nice rom

Good ROM but I have 1 question, did you fix camera bug? thnks for your Job.

Kamesh, do you know if the bluetooth headset works fine, the cam problem was fix? Thanx for good job man!

Exelent ROM! works fine, thank you!

im stuck on
Fastboot mode started
udc_start()
how will I fix this?

slvrviccivvic said:
im stuck on
Fastboot mode started
udc_start()
how will I fix this?
Click to expand...
Click to collapse
Hi, first you need to have all the drivers of PC Suite and all drivers for fastboot mode installed, then root device with gingerbreak (USB Debug Mode must be On). After that, turn off the phone and remove and replace the battery. Plug the phone and enter in fastboot mode.
Drivers for Fastboot:
Win7 and WinXP
http://www.mediafire.com/?d0e65bf8cz7j38d
WinXP Only
http://www.mediafire.com/?v60g66bxfpna8e7
Thanx please!

slvrviccivvic said:
im stuck on
Fastboot mode started
udc_start()
how will I fix this?
Click to expand...
Click to collapse
Try to reinsert the battery and press Volume down + Call + Power button It will reset your phone but if you have custom recovery installed, it will boot into recovery. If this does not work, check out the second method listed here http://www.blogotechblog.com/2011/12/how-to-root-lg-optimus-me-p350-after-firmware-update/ to unbrick your phone

slvrviccivvic said:
im stuck on
Fastboot mode started
udc_start()
how will I fix this?
Click to expand...
Click to collapse
OK Here is what you have to do: Install the lg p350 drivers and after connect the phone to the pc via usb . The phone will be detected and 3 drivers will be installed by the computer . After this is done go to device manager ( start -my computer right click- manage ) and should appear 3 devices related to lg p350 . Stop the modem one . Don't forget to get the SD card out of the phone. Download kdz updater ( google ) and lg p350 official firmware ( if you want to root then download 10.g cause 10.f can't be rooted , again google ) . Start the kdz updater and choose
3GQCT on “Type” and DIAG on “PhoneMode” . Then browse the kdz file ( the firmware downloaded ) and start update . NOTE : THE PC HAS TO BE OFFLINE WHILE UPDATING . More information here : http://www.sleetherz.com/2011/09/how-to-update-lg-optimus-p350-to-firmware-v-10c/
It worked for me

you have to give CREDITS! specially that this is a concept of SOME ONE!

Do i need to wipe data after or before flashing?
i see in instructions under 6. to wipe all data.

plazmagun said:
do i need to wipe data after or before flashing?
I see in instructions under 6. To wipe all data.
Click to expand...
Click to collapse
wipe data after flashing so it works perfect and u have to wipe only wipe\data

screen timeout lgp350
Sir where do I turnoff screen timeout I'm playing NFS then the screen timeout on the set timeout time., where to turn off it.,

LG LS840 Viper 4g*Unofficial Thread*

RDF for the LS840 AKA VIPER is up
LS840
So far it looks like it will be running Android Gingerbread
OS VersionAndroid 2.3.7
RETURN TO STOCK
05/04/2012 Latest!
LS840ZVC_02.SC_02.P25002.tot
More updates when they come
Software is def. being worked on by the way

Any word on the eta?
Sent from my PC36100 using xda premium

Not yet that I know off

Bump Bump
Sent from my MB855 using Tapatalk

I read that it will be between june and sept. Not confirmed though
Sent from my PC36100 using xda premium

Not sure if you've seen it, but LG open source site has the source code on it already. Since I'm a new member, I can't link to it, but if you search on google for LG Open Source, you should be able to find it.

http://hhtp.umnet.com/mobile-software/0-5546-0-java_j2me_apps-256
Open source
Sent from my PC36100 using xda premium

http://android-app-reviews.com/tag/lg-viper/
April 22!!!

05/04/2012 Latest!
LS840ZVC_02.SC_02.P25002.tot

custom roms for the LG Ls840
I just obtained my LG Viper and have currently rooted the device. I was curious to know if there is any speculation on upcoming custom roms for it, or if there are other roms out there for other devices which will run on the viper>>>

LG Viper Stock Firmware
Please give a copy of stock firmware that I can flash with the stock recovery, I really need it because my phone's bricked!

sextape said:
05/04/2012 Latest!
LS840ZVC_02.SC_02.P25002.tot
Click to expand...
Click to collapse
link is dead. Can you post new link?

do you have a good link for lg viper rom please

compare to LG Revolution, I'd prefer Viper.
dead link on .tot file, could someone re-upload the file please

Unfortunately we still don't have a stable cwm....its being worked on though...many including myself have bricked their viper...and although we have the .tot there's no .dll...i finally came up with a working recovery unbrick method including system and sprint apps...
androidforums.com/viper-4g-lte-all-things-root/613169-fully-working-unbrick-factory-reset-method-incl-system-apps-sprint.html
Sent from my LG-LS840 using Tapatalk 2

I see there isn't much happening on the Viper front. My only question is if anybody knows if this device tethers through BT PAN? The profile is listed but I'm not having any luck. Should I root and go through a tether app?

At least we got ics! Hopefully now a recovery and custom rom get built and we can get this show on the road.

Updated: Unbrick and/or manual ics install
http://forums.androidcentral.com/lg...s840-back-too-ls840zvc-ls840zvd-firmware.html
CREDIT- TJSANDERS
DOWNLOAD LINKS:
ZVD FIRMWARE(2.3.7): http://www.sendspace.com/file/dr4bq7
ZVI FIRMWARE (4.0.4) http://www.dropbox.com/s/aos8cpyjgdytfza/LS840ZVI.zip
1- Unzip to folder of your choice, root of C:\ works easiest IMO.
2- (Make sure you have @ least 60% battery and LG Drivers/ADB Installed.
3- Go to Device Manager -> Ports -> Right click on LGE USB Serial Port -> Properties, Advanced, Change port # to 41
3- Plug phone into pc ( charge only ) , pull battery to reboot, upon reboot hold down volume + PLUS Power To enter D/L mode.
4- Go to extracted Location, right click LGFlashTool, Run As Admin...
5- Check box for Select Manual Mode
( Even if listed, click on ... next to DLL to choose the .DLL in your extracted folder, and do the same for S/W (Click ADD, and add the S/W of your choice )
6- Click Ok..
7- Up Top Click the Icon for Ports
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check the box for port One ( I know we changed it to 41 in device manager and it may seem incorrect but it is, follow please.
8- Now ready to flash, Click the Yellow arrow at top left to start, THEN, Quickly unplug usb/replug ( This triggers the tool to start, otherwise it will stay stuck at Ready...)(You can just partially remove the usb plug then reinsert very quickly, do not have to completely remove.)
You should see it progressing from this point, it will continue to say 0kb/0kb, just let it do its thing . Sometimes it finishes at 80%, 89%, once your booted to the Home Screen, your done.
9- (OPTIONAL) To prevent any FC's and other errors, upon flashing, immediately do a factory reset.
OP (http://forums.androidcentral.com/lg...40-back-too-ls840zvc-ls840zvd-firmware-3.html) Credit: TJSanders.
PART 2, HOW TO MANUALLY INSTALL ICS 4.0.4 FOR THOSE WHO MAY HAVE NOT GOTTEN OTA UPDATE
1- Download official update.zip http://www.4shared.com/zip/YfxY5dCu/update.html
2- Download ADB: http://www.sendspace.com/file/hurew5
3- Extract ADB.zip to C:
4- Make sure official LG Drivers are installed, if not here is link: http://www.sendspace.com/file/lgixio
5- Place the update.zip in the root of your sd card. (Via USB Storage, or taking card out/using card reader)
**MAKE SURE CHARGE ONLY is CHOSEN and USB STORAGE= OFF BEFORE PROCEEDING**
6- Start -> Run -> cmd (Run as Admin)
4- In Command Prompt type: cd.. -> cd... (Untill you see C
5- Type cd adb
6- type: adb reboot recovery
7- Once booted into recovery, select Install zip from external storage (Home key = select, vol +/- scrolls.
8- Scroll to yes, press Home(Select), and wait about 15 minutes for your ICS 4.0.4 upgrade to proceed. =)
OP(http://forums.androidcentral.com/lg...ide-too-install-android-4-0-4-update-zip.html) CREDIT: TJSANDERS

For those who don't follow the other forum;
We now have two custom recoveries:
Project Open Cannibal Touch
TeamWin Recovery Project 2.3.2.3
A custom rom in the process of being made awesome(SmartViper)
A cusom kernel being worked on by the same person
And finally two people working on building cm10.
And hopefully some day, a forum here on xda
I cannot post links being a new user to xda but they are all available on the androidcentral forums

JoshCo1n said:
For those who don't follow the other forum;
We now have two custom recoveries:
Project Open Cannibal Touch
TeamWin Recovery Project 2.3.2.3
A custom rom in the process of being made awesome(SmartViper)
A cusom kernel being worked on by the same person
And finally two people working on building cm10.
And hopefully some day, a forum here on xda
I cannot post links being a new user to xda but they are all available on the androidcentral forums
Click to expand...
Click to collapse
Custom ZVI kernel built from source by me available today.

[ROM]XBSA V20G Basic ICS Themed

XBSA Basic V20G Gingerbread ICS Themed
----------LG STOCK KERNEL --------------------------------- TITAN KERNEL-----------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my everyday V20G based ROM.
This is 90% stock v20G.
Features:
*Base: Chinese V20G
*Kernel: Stock kernel
*Deodexed
*Zipaligned
*Rooted
*Ad Free Hosts
*Removed bloatware
*Added wallpapers
*Added ICS look to SystemUI , Framework and apks
*Changed Bootanimation
Applications:
*ES file manager
*Router Keygen
*Wifikill
*Image editor
*Prada Camera
*Google PlayStore (It will show up AFTER you connect to Internet)
*FM Radio
Known bugs:
*English and chinese languages only
Thanks
--jamm513 for his ICS Real3D Edition GB Theme
--To all XDA members and developers who help us with their tools and knowledge
WARNING THIS ROM WILL WIPE YOUR SYSTEM AND APPS
INSTALL IT ONLY IF YOU HAVE MADE A BACKUP OF YOUR OLD ROM
This ROM works for me , if it doesnt work for you i will try to help if i can
but i take no responsibility for anything that happens to your phone.
This ROM "WILL NOT" install V20G baseband. You should do it yourself.
PREINSTALLATION:
-LG STOCK V20G should be installed
-Phone should be Factory Reseted
-ROOT should be installed (use MEGATRON by Dan Rosenberg)
-CWM Recovery should be installed.Download it from GooglePlaystore or use CWM-Recovery-Touch 5.8.1.5 Flasher for P920 Optimus 3D by Paki0402
INSTALLATION:
- Download the ZIP file from here and DO NOT unzip it
- Copy the .ZIP file to your INTERNAL SD card
- Boot your phone into CWM (hold Vol Down, 3D & Power Button)
- Wipe cache
- Wipe dalvik cache
- Select 'Install ZIP from SD Card'
- Select 'Choose Zip from internal sdcard'
- Then select the .ZIP file you downloaded
- Wait for install and reboot
You can flash Samnos Titan Kernel... If you want it O/C.
[KERNEL][OC/UV1.2+/1.4 GhzCPU/GPU384 Mhz+More][Gingerbread]Titan Kernel V0.5 V21A/D OR 0.6R
Doesn't install?
Something doesnt work?
Too many Force Closed Apps?
Watch the video guide for a HowTO Flash Offline LG STOCK ROM with KDZ_FW_UPD (and check your hosts file before you try to download it from LG)
You will also need to download this LG_KDZ_FW-Update_OfflineFix.zip
VIDEO GUIDE
STEP1
INSTALL LG STOCK V20G
STEP2
FACTORY RESET, ROOT STOCK LG AND INSTALL CWM RECOVERY
STEP3
CLEAR DALVIK, INSTALL XBSA V20G BASIC ICS ROM
FLASH TITAN KERNEL AND MORE TESTS

Do you have any solution so far how to add langiages?

I always use english UI so it didnt bother me but i ll have a look at it on weekend..

GentlyCriminal said:
Do you have any solution so far how to add langiages?
Click to expand...
Click to collapse
Try to install the app called "MoreLocale2" from play.

it doesn't work, because there are no other languages in framework-res.apk integrated, i tried to compile a new one, but then the phone reboots all the time.

Great finally a v20G rom, thanks. Now we need a kernel to o/c it

sak500 said:
Great finally a v20G rom, thanks. Now we need a kernel to o/c it
Click to expand...
Click to collapse
Every build has it's own kernel source and without the kernel source you cannot build a kernel you can only tweak the kernel that is about it.. However if you have been reading the forums correctly it seems 21D kernels work with 20G...

sak500 said:
Great finally a v20G rom, thanks. Now we need a kernel to o/c it
Click to expand...
Click to collapse
forgot to say that i use titan kernel ..works ok.

On stock v20g i lost signal when i flashed titan. Anyway will use it on your rom tnx

how i will install baseband 20g?
(ela re patrida)

tsagod said:
how i will install baseband 20g?
(ela re patrida)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1287236
I have used teh above to flash from froyo to gb to froyo and again to gb. V21A, V21D, V20G.

sak500 said:
On stock v20g i lost signal when i flashed titan. Anyway will use it on your rom tnx
Click to expand...
Click to collapse
I am using TitanKernel_V0.5_V21D__22-04-2012.zip
tsagod said:
how i will install baseband 20g?
(ela re patrida)
Click to expand...
Click to collapse
Have a look at this
[TUTORIAL] Flash BIN rom, Unbrick, Update - Optimus 3d (Service Flash software)
or do it like sak above
if you still cant do it send me a pm.

guys once again keep a backup of your old rom.
I have set it to erase apps as well to make sure installation is clean.
Keep backup!

Seems ok. But no Google Play Store?

Google playstore is there.
It will show up when you connect to the internet.
Sent from my LG-P920 using XDA

Can't seem to get titan kernel 0.2 or 0.5 to work on this. 0.2 disables the gsm so no network and 0.5 on first boot loads up the system but later the screen turns black and can't do anything. calling the cell gives a ringing tone on caller side but no response from teh phone. only way to hardware boot to cw and flash back from safe backup before titan install. Any idea?

after how much time it gets black? cause mine doesnt do that

Mines work great. Excellent rom. But keyboard doesnt work in potrait mode or the other mode
Sent from my LG-P920 using XDA

Sometimes the application force closes and works well after restart. The keyboard thing i mentioned above was also solved after the restart. Your work is highly appreciated. Thanks bro for your hardwork
Sent from my LG-P920 using XDA

Glad you like it.
After you flash it finish the lg setup guide, then connect it to your internet. Playstore icon will apear only if you connect it.login to playstore and let it update
It would be good to Reboot it after this.
Keyboard has many options to choose.
Sent from my LG-P920 using XDA

{OEM}[ROM][TUTORIAL] Micromax Funbook Original Livesuit Image LEAKED !!

UPDATE : just a quicknote, i just found out that this img file makes the /system partition of 503Mb instead of 251Mb as other img for MOMO9 or older tablets, So in order to have a bigger partition, one can flash this, then install anyother rom, for instance, cyanogenmod 9/10 full version instead of lite. Good luck flashing guys
___________________________________________________________________________________________________
Hey everyone,
Presenting a leaked version of ORIGINAL MICROMAX FUNBOOK livesuit image for P300 Model (from MM SC ). If you want to revert back to original rom, worry not, no need to copy that backup file & restore using CWM recovery. Some of us were even having trouble to revert back to original with cwm backups ( failed to restore /system error!). so here is it the answer to getting back to the factory state of our tablet.
Procedure:-
JUST DOWNLOAD THE 7z FILE, EXTRACT AND FLASH THE MMX_Funbook_P300.img IN THE SAME FASHION AS OTHER LIVE SUIT IMAGES. FOR TUTORIAL ON LIVESUIT & DOWNLOADING LIVESUIT REFER :-MOMO9 LIVESUIThttp://tabletrepublic.com/forum/ivi...-ployer-momo9-firmware-rom-releases-1610.html
Congratulations on getting 100% original software installed on your rom. Go & claim your warranty if you want ( tho MM suck at it to the core )
POST INSTALL NOTES
Once you have flashed this image, you will find yourself with following specifications :-
Baseband 1.2
Build Number 97F1-D1-H2-MMX.20120914
If at this point you want to get another rom installed or you have to get root, install superuser & get clockworkmod recovery the old methods does not hold any good. You have to follow this procedure to get root & install cmw recovery. THIS METHOD IS SAME AS FOR ALL ROMS WITH BASEBAND 1.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Getting the power of ROOT
Now the easiest way to get root is to use UnlockRoot software which works as a charm with our funbook device. Just connect usb cable, enable debugging & press unlock on the software. Then after the tab is restarted (by the software) you get root & superuser installed.
Getting CMW recovery on the tab
Once rooted we need to install ES File Explorer on our tab. Once installed, Go to settings, in root options tick the all boxes
Make sure superuser prompts, hence verifying successful installation of superuser. If not GET SUPERUSER UP & RUNNING FIRST.
Then navigate to the root folder by pressing back key. Stop where it says press back again to exit. ( in address bar the address will be / )
Next there will be a folder named Dev(/). long press on this folder & scroll down to set properties. Then click change, check all the boxes are ticked
Repeat the above steps with data folder (/), block folder (/dev/block), nandg file (/dev/block/nandg)
Finally all the complex part is behind us, to ultimately install the CMW recovery now, just use your old cmw recovery script for ICS, run it & done, it will be installed. Reboot & check pressing the volume down key + menu key & power key.
Njoy guys .... have fun & oh .. hit thanks too
DOWNLOAD
JUST DON'T FORGET TO VERIFY THE MD5 Sumcheck
58991EC458A6DC3421004202C0F7E929
PS: I am not responsible for any of the content nor do i take any credibility for providing the content! , i found this on the WWW & just sharing using a highspeed file server (MEDIAFIRE) and a simple guide all in one place. Don't blame me if this method do any harm or brick your tab. I did my best to be safe, i tested this & flashed successfully 4 times on my funbook p300 & its working for me. !!!!

Hey thanks a lot!! Will check this out once I am home..

Hey can u please upload this in some other site? the links given are no longer working

Links updated to 4shared can't find any other website for larger file size. Hit thanks if i helped :victory::laugh::good:

mechexpert said:
Links updated to 4shared can't find any other website for larger file size. Hit thanks if i helped :victory::laugh::good:
Click to expand...
Click to collapse
Hey thanks a lot for the quick response!! & sorry for the delay on my part..it worked like a charm..!! :victory::victory:

Link not working can you please re upload it... May be on dev host or make a torrent!!
Edit: it's working now
Sent from my LG-P970 using xda premium

anybody pls post link here pls ??? direct rom link...:silly:

PLS HELP A BRO IN NEED..
its not related but i thought u guys can help..i flashed a wrong zip on my fb and now when i tirn it on..it shows only white screen and then flashes white screen...i tried flashing livesiute img available at xda...but my pc wont detect my tab...im soo in middle of crisis..my 6k has gone waste...pls simeone..if can help me...i will be highly grateful and if my tabs works again..i will share poece of cake..(by recharging ur sim with some fair balance)as a token of gratitude. ...if someone living in delhi..can flash and make my tab work.,i will pay him a visit and 300 bucks...pls help me....cuz my handicapped brother uses this tab and im not financially good to purchase him another..
thank u..

devilanuj17 said:
PLS HELP A BRO IN NEED..
its not related but i thought u guys can help..i flashed a wrong zip on my fb and now when i tirn it on..it shows only white screen and then flashes white screen...i tried flashing livesiute img available at xda...but my pc wont detect my tab...im soo in middle of crisis..my 6k has gone waste...pls simeone..if can help me...i will be highly grateful and if my tabs works again..i will share poece of cake..(by recharging ur sim with some fair balance)as a token of gratitude. ...if someone living in delhi..can flash and make my tab work.,i will pay him a visit and 300 bucks...pls help me....cuz my handicapped brother uses this tab and im not financially good to purchase him another..
thank u..
Click to expand...
Click to collapse
oh really sorry for such late reply ... but have you tried installing another copy (fresh copy) of livesuit from the internet ? have you properly connected the tablet by pressing the vol - & options button simultaneously & hitting the power key 10 times ???
i have tried almost all those firmwares out there for funbook or momo9 ... i have faced this issue many times but you might not be pressing the button configuration accurately ... rest assured your tab is fine & 6k is not a waste as u might think !!! GOOD LUCK & report back if you still face problems, i'll help you step by step if needed !

funbook
will it work for p500?

rushiachrekar said:
will it work for p500?
Click to expand...
Click to collapse
i am afraid not, it *MIGHT* work on other tablets with ALLWINNER A10 processor.