Hi,
I have taken the code of G3MOD code and modded it for JB.
Also I have included the Bluetooth fix that I have done for ICS. Yeah the same fix is also available in JB.
Use this kernel with ICS & JB as the bluetooth fix is applied only to these two versions.
Try it out and let me know the comments.
Download Here
Thanks to all G3 developers.
Special Thanks to g3mod team, marcellusbe, hillbeast, cdesai.
If I forget to thank anyone it's not intended, PM me. I will thank you.
Note: I am not responsible for any damage caused to your phone (softbrick or hardbrick).
Thanks mate , Hope to see more development from your side as well ...to make G3 the best ever phone
Can you make a .tar version please? I can't flash it through CWM.... I flashed JB then without rebooting flashed this but it still didn't work... Same with gapps, they don't install for me...
I also can't flash this kernel either as it still says im on [email protected] #cm7_kernel_oc_1.8
Are we able to access CWM then?
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
BeriCud said:
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
Click to expand...
Click to collapse
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
ilievski.ace said:
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
Click to expand...
Click to collapse
When you install the ROM you should wipe the data as well but when installing the kernel you should wipe cache and dalvik cache.
Click thanks if I helped.
Thank you very much....
A small query....
If I install the kernel immediately after applying JB update then will I be able to access cwm the next time??
Thanks
kernel "bluetooth???"
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
zsolt64 said:
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
Click to expand...
Click to collapse
pmanian said:
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
Click to expand...
Click to collapse
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
@pmanian
Can you make UMS working on ICS/JB with g3mod kernel?
To all who managed to get it working: Do data2sd and CWM work? These are the key features I'm missing right now
Thanks a lot!!
Sent from my GT-I5801 using xda app-developers app
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
pathfinderhd said:
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
Click to expand...
Click to collapse
Search the JB thread in the development section. He released a build but it is old and has quite a few bugs in it which he has fixed.
I reflashed JB, then g3mod, wiped data, cache and dalvik cache. Neither CWM nor data2sd are working, but the bootscreen changed, and I don't get stuck. Can anyone help me?
ilievski.ace said:
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
Click to expand...
Click to collapse
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
ilievski.ace said:
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
Click to expand...
Click to collapse
take any tar of any rom.......remove all the files in it and place the zImage file in the provided zip into the tar file.(With the help of TOTAL COMMANDER)
process:
Install the ROM through CWM...
then go to download mode and then flash the kernel through ODIN
reboot in to recovery and clear cache & dalvik-Cache.
reboot & enjoy.
hi,
i flashed flyrom v3 and oc kernel two days ago.then i came back to cm 9.1 but when i am updating apps on playstore phone reboots.i've wipe everything and done a clean install but problem is still there.how can i fix that?
did u wipe dalvik cache?
russelldias said:
did u wipe dalvik cache?
Click to expand...
Click to collapse
yes
should have helped then! can u give a logcat?
installed the latest rom from kang he update 7/4 now my wifi not working, i did wipe cache/dalvik before then i tried to format everything but still not working anyone else have same problem or solution
tertix said:
installed the latest rom from kang he update 7/4 now my wifi not working, i did wipe cache/dalvik before then i tried to format everything but still not working anyone else have same problem or solution
Click to expand...
Click to collapse
hi,
see this thread
http://forum.xda-developers.com/showthread.php?t=2085025
tertix said:
installed the latest rom from kang he update 7/4 now my wifi not working, i did wipe cache/dalvik before then i tried to format everything but still not working anyone else have same problem or solution
Click to expand...
Click to collapse
Try to Install new version of CM 10.1. In 7/4 my Wi-fi glitches too.
I have a TF101 and finally decided to root and install the JB ROM. I started with EOS JDQ39 Nightly 108 and gapps_4.2.2_TF101_20130323b. This worked fine but when I updated to the nightly 111 I noticed that I Google play was not working. I would click on the app and it would start to load but disappear. It appears that I am not logged in anymore because gmail does not work either. I have tried to delete data from the gmail app and google play store from settings but the did not work. I have tried installing gapps again. Does not work. I tried another gapps, gapps-jb-20130301-signed and that just freezes my tablet on the EeePad screen.
Any ideas on how to get signed in on the tablet without a factory reset?
Go to recovery
Clear Cache
Clear Davlik Cache
Install Gapps again..
Gapps has to be installed after every ROM update..
Hi, I confirm this worked for me! Thanks
lowandbehold said:
Go to recovery
Clear Cache
Clear Davlik Cache
Install Gapps again..
Gapps has to be installed after every ROM update..
Click to expand...
Click to collapse
Thanks, that worked. The only thing I did differrent this time is not clear system when I installed the gapps and it worked great.
:laugh:
fholtsberg said:
Thanks, that worked. The only thing I did differrent this time is not clear system when I installed the gapps and it worked great.
:laugh:
Click to expand...
Click to collapse
Glad it worked. You should do that everytime you update your ROM.
Few days ago I flashed cm 12.1[UNOFFICIAL] without clearing data and cache as I was on cm 12[UNOFFICIAL] but then I decided to flash PAC MAN ROM [OFFICIAL] before flashing the PAC MAN ROM I cleared the data cache etc...while wiping CWM recovery gave me an error ...
which was "E:unknown volume for path [ext-sd]" I still tried to clear dalvick cache etc but still the same error then I flashed the rom and Gapps anyways and rebooted the data was cleared and everything seemed fine but when I tried to install and run apps like 'Adobe Acrobat Reader','Tubemate','Facebook',and some more 3rd party apps they all would FC some would FC on startup some while using them Today I flashed Ressurection Remix 5.5.5[OFFICIAL] by using the same process I used for flashing PAC MAN ROM but CWM gave same error and the apps still DO NOT WORK THESE APPS WORKED FINE IN CM12 and CM12.1
I dont know what is wrong or which step I messed up..
I would be very great full if someone helps me out as I really need those apps to work:crying:
Thanks!
And yeah I did no changes in the Kernel and all The only changes I did Are mentioned above
gs2plus.123 said:
Few days ago I flashed cm 12.1[UNOFFICIAL] without clearing data and cache as I was on cm 12[UNOFFICIAL] but then I decided to flash PAC MAN ROM [OFFICIAL] before flashing the PAC MAN ROM I cleared the data cache etc...while wiping CWM recovery gave me an error ...
which was "E:unknown volume for path [ext-sd]" I still tried to clear dalvick cache etc but still the same error then I flashed the rom and Gapps anyways and rebooted the data was cleared and everything seemed fine but when I tried to install and run apps like 'Adobe Acrobat Reader','Tubemate','Facebook',and some more 3rd party apps they all would FC some would FC on startup some while using them Today I flashed Ressurection Remix 5.5.5[OFFICIAL] by using the same process I used for flashing PAC MAN ROM but CWM gave same error and the apps still DO NOT WORK THESE APPS WORKED FINE IN CM12 and CM12.1
I dont know what is wrong or which step I messed up..
I would be very great full if someone helps me out as I really need those apps to work:crying:
Thanks!
And yeah I did no changes in the Kernel and all The only changes I did Are mentioned above
Click to expand...
Click to collapse
Try TWRP and clean reinstall.
Sent from my GT-I9105P using RR ROM
blureshadow said:
Try TWRP and clean reinstall.
Sent from my GT-I9105P using RR ROM
Click to expand...
Click to collapse
Yeah its solved now there was a bug in cm 12.1 no bug on PA bc its aosp
Sent from my GT-I9105P