Hi,
I have taken the code of G3MOD code and modded it for JB.
Also I have included the Bluetooth fix that I have done for ICS. Yeah the same fix is also available in JB.
Use this kernel with ICS & JB as the bluetooth fix is applied only to these two versions.
Try it out and let me know the comments.
Download Here
Thanks to all G3 developers.
Special Thanks to g3mod team, marcellusbe, hillbeast, cdesai.
If I forget to thank anyone it's not intended, PM me. I will thank you.
Note: I am not responsible for any damage caused to your phone (softbrick or hardbrick).
Thanks mate , Hope to see more development from your side as well ...to make G3 the best ever phone
Can you make a .tar version please? I can't flash it through CWM.... I flashed JB then without rebooting flashed this but it still didn't work... Same with gapps, they don't install for me...
I also can't flash this kernel either as it still says im on [email protected] #cm7_kernel_oc_1.8
Are we able to access CWM then?
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
BeriCud said:
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
Click to expand...
Click to collapse
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
ilievski.ace said:
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
Click to expand...
Click to collapse
When you install the ROM you should wipe the data as well but when installing the kernel you should wipe cache and dalvik cache.
Click thanks if I helped.
Thank you very much....
A small query....
If I install the kernel immediately after applying JB update then will I be able to access cwm the next time??
Thanks
kernel "bluetooth???"
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
zsolt64 said:
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
Click to expand...
Click to collapse
pmanian said:
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
Click to expand...
Click to collapse
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
@pmanian
Can you make UMS working on ICS/JB with g3mod kernel?
To all who managed to get it working: Do data2sd and CWM work? These are the key features I'm missing right now
Thanks a lot!!
Sent from my GT-I5801 using xda app-developers app
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
pathfinderhd said:
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
Click to expand...
Click to collapse
Search the JB thread in the development section. He released a build but it is old and has quite a few bugs in it which he has fixed.
I reflashed JB, then g3mod, wiped data, cache and dalvik cache. Neither CWM nor data2sd are working, but the bootscreen changed, and I don't get stuck. Can anyone help me?
ilievski.ace said:
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
Click to expand...
Click to collapse
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
ilievski.ace said:
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
Click to expand...
Click to collapse
take any tar of any rom.......remove all the files in it and place the zImage file in the provided zip into the tar file.(With the help of TOTAL COMMANDER)
process:
Install the ROM through CWM...
then go to download mode and then flash the kernel through ODIN
reboot in to recovery and clear cache & dalvik-Cache.
reboot & enjoy.
Related
firstful the ROM is great but I having this problem after flashing the rom
Force close in everything and I wanna enjoy the rom
my dvice is Nexus s 9023 I hope you can help me
wesam32003 said:
firstful the ROM is great but I having this problem after flashing the rom
Force close in everything and I wanna enjoy the rom
my dvice is Nexus s 9023 I hope you can help me
Click to expand...
Click to collapse
you probably didn't do a complete wipe before flashing
No but I did format system , data , boot , from the recovery mode I think it's the same
Or not plz help me
Try one of the alternate kernels on his second post in his thread, and do a cache and dalvic wipe
Sent from the future to put right what once went wrong.
Hi Guys,
Has anyone had this problem?
I had Creed's Rom v2.0 last month, and that worked perfect. I used it for a month.
this morning I decided to change my android rom into a new version of Creed's Rom.
I tried to boot and flash the Creed's Rom v3.0 and it's successfully flashed,,
But, whenever I try to boot my phone, I got stuck with the boot animation!!
It's never take me into the home screen??
It's keep showing me the bootanimation (Creed's Rom Text) for a long time ..,
So i decided to go back into SGFit default stock and successfully flashed it with ODIN..
When the device try to reboot, I get the same SAMSUNG bootanimation,,
it's keep rebooting the phone again and again (without any result),
And then I decide to flash the other rom., I tried "CyanogenMod 7.1",, I flashed it successfully, I do "Wipe Data / Reset" and "Wipe Cache Partition" also "Wipe Dalvik Cache" too, but whenever I try to reboot the phone, I've always got the freakin bootanimation and never take into the homescreen..
I also reformatted the memory card, still no result... :/
Any ideas please???
Boot into cwm and format system data cache dalvik
Then install a ROM using cwm
Sent from my GT-S5670 using xda premium
Aspire said:
Boot into cwm and format system data cache dalvik
Then install a ROM using cwm
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
I've do these steps clearly.. still no result..
try to wipe data, cache, format system, wipe dalvik,
INSTALL ZIP file, wipe data again, wipe cache again, then reboot...
cygnus39 said:
try to wipe data, cache, format system, wipe dalvik,
INSTALL ZIP file, wipe data again, wipe cache again, then reboot...
Click to expand...
Click to collapse
I've do it already,, still no result..
the bootanimation keep restarting again and again,, never take into homescreen..
try to flash another rom...
marbe the zip file you're downloading is corrupt or damaged...
cygnus39 said:
try to flash another rom...
marbe the zip file you're downloading is corrupt or damaged...
Click to expand...
Click to collapse
Well,, let's see.. I'll download another one..
ansyori28 said:
Well,, let's see.. I'll download another one..
Click to expand...
Click to collapse
and this time while flashing via cwm, format system (its under mounts and storage)...
a.cid said:
and this time while flashing via cwm, format system (its under mounts and storage)...
Click to expand...
Click to collapse
I know this thing..
heyy guys...
I've done everythings u said..,
I've flashed a new rom, wipe data, wipe cache, wipe dalvik, install the zip file, wipe data again, wipe cache again, then reboot...
But there is no result at all...
I still get the a bootanimation.., and now, I tried flash "CyanogenMod 7 RC5.6", and the result is nothing.., now I got the "Android" text, it's never take me into home..
Any ideas??
I had a similar problem yesterday. To me was advised to install via ODIN stock ROM (S5670XXKPI) which has 4 files. I did it, and the system is booted. Then I changed stosk and other custom ROM and everything works OK.
ZmisiS said:
I had a similar problem yesterday. To me was advised to install via ODIN stock ROM (S5670XXKPI) which has 4 files. I did it, and the system is booted. Then I changed stosk and other custom ROM and everything works OK.
Click to expand...
Click to collapse
where u get that stock rom (S5670XXKPI) ?? I'll try to flash it..
hi dear the same problem i have been faced early and don't worry at all. first of all your sim card and memory card eject of the phone.go to recovery mode (cwm or stock recovery) then wipe cache and factory reset first than flash stock rom 2.3.6 DDKT3 WITH ODIN.AFTER FLASH WIPE cache and factory reset again.
simple and i am sure you problem may be solve.....
if you any problem with stock rom updates please mail to me and i will send an link attachment to you an official stock rom .
this is my first post in this forum so i can't submit this link here
email : [email protected]
by....
pradeep170481 said:
hi dear the same problem i have been faced early and don't worry at all. first of all your sim card and memory card eject of the phone.go to recovery mode (cwm or stock recovery) then wipe cache and factory reset first than flash stock rom 2.3.6 DDKT3 WITH ODIN.AFTER FLASH WIPE cache and factory reset again.
simple and i am sure you problem may be solve.....
if you any problem with stock rom updates please mail to me and i will send an link attachment to you an official stock rom .
this is my first post in this forum so i can't submit this link here
email : [email protected]
by....
Click to expand...
Click to collapse
thanks,, but how about "S5670DXT4" ?? I'm currently downloading this version.. can I use this one?..
ansyori28 said:
where u get that stock rom (S5670XXKPI) ?? I'll try to flash it..
Click to expand...
Click to collapse
S5670XXKPI link:
http://hotfile.com/dl/145761279/c6ea6ce/S5670XXKPI.zip.html
ZmisiS said:
S5670XXKPI link:
http://hotfile.com/dl/145761279/c6ea6ce/S5670XXKPI.zip.html
Click to expand...
Click to collapse
thanks,, but how about the "S5670DXT4" version??..
Will it work?
nevermind, wrong post by me...
ansyori28 said:
thanks,, but how about the "S5670DXT4" version??..
Will it work?
Click to expand...
Click to collapse
I installed S5670XXKPI. After I installed S5670KPU, S5670XWKT2, and work for me. S5670DXKT4 I don't installed. I don't know will it work for you. I think it should.
The first you install S5670XXKPI, after you installed and the system is booted, you later install what want.
ZmisiS said:
I installed S5670XXKPI. After I installed S5670KPU, S5670XWKT2, and work for me. S5670DXKT4 I don't installed. I don't know will it work for you. I think it should.
The first you install S5670XXKPI, after you installed and the system is booted, you later install what want.
Click to expand...
Click to collapse
thanks,,
It's Working Perfectly..,
ansyori28 said:
thanks,,
It's Working Perfectly..,
Click to expand...
Click to collapse
OK. You're welcome.
Hello everyone. My EVO lets me download ROMs but when I flash them on my phone it keeps re-doing the loading screen. I've used cyanogen mods 7.2,7.1,and 7.0 (all stable releases),Savaged- Zen, Fresh, OMJ, Myn, Salvage-Mod. I am using SOS(Swagged Out Stock) and I can't download any new ROMs I've restored my phone and it still wouldn't let me. Sometimes I can't even download any applications from the Market and some that I can they don't work. I just wanted to download Cyanogen Mod 7.2. Can someone please help?
Have you tried doing clean installs (format all partitions and factory reset before flashing a new rom)? You could also wipe the dalvik cache after flashing.
Yeah I have whipped dalvik cache and factory reset it and it doesn't work
DanielsEvo4g said:
Yeah I have whipped dalvik cache and factory reset it and it doesn't work
Click to expand...
Click to collapse
How about the partitions?
Yeah still nothin
DanielsEvo4g said:
Yeah still nothin
Click to expand...
Click to collapse
Try reflashing the stock rom via fastboot and starting over.
Alright thanks for the help btw.
Hi,
I can't write under development thread because i don't have enough posts. I have problem with flashing Marmite kernel. I have Strawberry ROM and CWM istalled. And when i try to flash kernel (i wipe cache and dalvik cache) it says that it's completed but when i try to reboot it shows google logo and after that nothing. Do i need to reboot in recovery after i wipe cache and than install or do i need to do somethin else? I have JB 4.1.2.
Sorry for making a new therad but as i said i can't post under the right threads.
Thanks for help
BombasMirko said:
Hi,
I can't write under development thread because i don't have enough posts. I have problem with flashing Marmite kernel. I have Strawberry ROM and CWM istalled. And when i try to flash kernel (i wipe cache and dalvik cache) it says that it's completed but when i try to reboot it shows google logo and after that nothing. Do i need to reboot in recovery after i wipe cache and than install or do i need to do somethin else? I have JB 4.1.2.
Sorry for making a new therad but as i said i can't post under the right threads.
Thanks for help
Click to expand...
Click to collapse
Are you using the CM or All Other kernel? There is 2 and if you flash the wrong one you will get stuck at the logo. Strawberry is not a CM rom so download the all other. Reboot to recovery, wipe cache, dalvik, and flash. Pretty sure that will solve your problem. If not post back and we take it from there.
mdean1981 said:
Are you using the CM or All Other kernel? There is 2 and if you flash the wrong one you will get stuck at the logo. Strawberry is not a CM rom so download the all other. Reboot to recovery, wipe cache, dalvik, and flash. Pretty sure that will solve your problem. If not post back and we take it from there.
Click to expand...
Click to collapse
Hello i am using all other kernel. And I tried again. So when it is installing it says:
finding update package...
opening update package...
installing update...
Making marmite...
extracting from yeast...
seeking help...
UNUNDERSTANDABLE MESSAGE 3...
Lid is licked.
Install from sdcard complete.
Than i hit reboot and it is the same as befor.
BombasMirko said:
Hello i am using all other kernel. And I tried again. So when it is installing it says:
finding update package...
opening update package...
installing update...
Making marmite...
extracting from yeast...
seeking help...
UNUNDERSTANDABLE MESSAGE 3...
Lid is licked.
Install from sdcard complete.
Than i hit reboot and it is the same as befor.
Click to expand...
Click to collapse
Then the kernel flashed fine so that is not the problem. You may have to wipe and start over. Wipe system, cache, dalvik, then the ROM, Gapps if needed, then the kernel.
What model NS are you running? Is it Sprint or the other carriers? Maybe you are flashing the wrong type ROM.
Report back and let me know.
I have I9023. I am from slovenia so i don't have Sprint. So i have to wipe data and everything. How do i wipe ROM, Gapps and kernel? And is enough if i do backup in ROMmanager?
+1
Sent from my SCH-I535 using Tapatalk 2
BombasMirko said:
I have I9023. I am from slovenia so i don't have Sprint. So i have to wipe data and everything. How do i wipe ROM, Gapps and kernel? And is enough if i do backup in ROMmanager?
Click to expand...
Click to collapse
When you do a format system it wipes the whole phone. Just flash the Strawberry ROM the same way you flashed the kernel.
When i do factory reset will i lose things saved on sd (strawberry rom, kernel and CWR)?
BombasMirko said:
When i do factory reset will i lose things saved on sd (strawberry rom, kernel and CWR)?
Click to expand...
Click to collapse
No it just wipes the system not the SD card. It clears the rom and kernel. As long as you got the ROM and kernel zip on your phone you can flash right from it. Flashing the rom is just like you did the kernel. SD card will be fine as long as you don't format it which is a separate function.
I wiped data (factory reset) -> wipe cache -> wipe dalvik -> instal ROM -> instal Kernel
But still doesn't work :crying:
BombasMirko said:
I wiped data (factory reset) -> wipe cache -> wipe dalvik -> instal ROM -> instal Kernel
But still doesn't work :crying:
Click to expand...
Click to collapse
Did the ROM successfully install? Are you positive the ROM and Kernel you are flashing is the correct Nexus S version? I'm running out of options here.
Yes i believe that is installed corectly because it says under the about phone rasbeanjelly build date and kernel is dirty lucifer or something. ROM is Strawberry which is for NS. Thanks for your help you made a big effort here :good:
BombasMirko said:
Hello i am using all other kernel. And I tried again. So when it is installing it says:
finding update package...
opening update package...
installing update...
Making marmite...
extracting from yeast...
seeking help...
UNUNDERSTANDABLE MESSAGE 3...
Lid is licked.
Install from sdcard complete.
Than i hit reboot and it is the same as befor.
Click to expand...
Click to collapse
Haha, lol.
That's a joke from Bedalus.
Everything is okay. Go in Settings, Informations and you can See that the kernel is installed
Gesendet von meinem Nexus S mit Tapatalk 2
install the CM nightly version.
BombasMirko said:
Yes i believe that is installed corectly because it says under the about phone rasbeanjelly build date and kernel is dirty lucifer or something. ROM is Strawberry which is for NS. Thanks for your help you made a big effort here :good:
Click to expand...
Click to collapse
Glad I could be of help and glad to see it's working.
AzN MusiQ said:
Haha, lol.
That's a joke from Bedalus.
Everything is okay. Go in Settings, Informations and you can See that the kernel is installed
Gesendet von meinem Nexus S mit Tapatalk 2
Click to expand...
Click to collapse
Yeah it is funny but we were way past that.
ej8989 said:
install the CM nightly version.
Click to expand...
Click to collapse
Genius! Now if only we can get you to read the thread first.
AzN MusiQ said:
Haha, lol.
That's a joke from Bedalus.
Everything is okay. Go in Settings, Informations and you can See that the kernel is installed
Gesendet von meinem Nexus S mit Tapatalk 2
Click to expand...
Click to collapse
The problem is that i can't go in Settings because the OS doesn't boot. It shows google logo and after that nothing. Then i have to restore backup if I want to get back in OS and in settings it says lucifer kernel...
BombasMirko said:
The problem is that i can't go in Settings because the OS doesn't boot. It shows google logo and after that nothing. Then i have to restore backup if I want to get back in OS and in settings it says lucifer kernel...
Click to expand...
Click to collapse
download marmite CM version, go to recovery and flash it. do not wipe anything.
i'm using latest strawberry. tried it, worked.
ej8989 said:
download marmite CM version, go to recovery and flash it. do not wipe anything.
i'm using latest strawberry. tried it, worked.
Click to expand...
Click to collapse
I can confirm this on latest Strawberry. CM version works - All other version does not.
ej8989 said:
download marmite CM version, go to recovery and flash it. do not wipe anything.
i'm using latest strawberry. tried it, worked.
Click to expand...
Click to collapse
Wow thanks it worked :good::laugh:
BombasMirko said:
Wow thanks it worked :good::laugh:
Click to expand...
Click to collapse
no problem :good:
hi,
i flashed flyrom v3 and oc kernel two days ago.then i came back to cm 9.1 but when i am updating apps on playstore phone reboots.i've wipe everything and done a clean install but problem is still there.how can i fix that?
did u wipe dalvik cache?
russelldias said:
did u wipe dalvik cache?
Click to expand...
Click to collapse
yes
should have helped then! can u give a logcat?