Related
Hi,
I have taken the code of G3MOD code and modded it for JB.
Also I have included the Bluetooth fix that I have done for ICS. Yeah the same fix is also available in JB.
Use this kernel with ICS & JB as the bluetooth fix is applied only to these two versions.
Try it out and let me know the comments.
Download Here
Thanks to all G3 developers.
Special Thanks to g3mod team, marcellusbe, hillbeast, cdesai.
If I forget to thank anyone it's not intended, PM me. I will thank you.
Note: I am not responsible for any damage caused to your phone (softbrick or hardbrick).
Thanks mate , Hope to see more development from your side as well ...to make G3 the best ever phone
Can you make a .tar version please? I can't flash it through CWM.... I flashed JB then without rebooting flashed this but it still didn't work... Same with gapps, they don't install for me...
I also can't flash this kernel either as it still says im on [email protected] #cm7_kernel_oc_1.8
Are we able to access CWM then?
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
BeriCud said:
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
Click to expand...
Click to collapse
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
ilievski.ace said:
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
Click to expand...
Click to collapse
When you install the ROM you should wipe the data as well but when installing the kernel you should wipe cache and dalvik cache.
Click thanks if I helped.
Thank you very much....
A small query....
If I install the kernel immediately after applying JB update then will I be able to access cwm the next time??
Thanks
kernel "bluetooth???"
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
zsolt64 said:
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
Click to expand...
Click to collapse
pmanian said:
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
Click to expand...
Click to collapse
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
@pmanian
Can you make UMS working on ICS/JB with g3mod kernel?
To all who managed to get it working: Do data2sd and CWM work? These are the key features I'm missing right now
Thanks a lot!!
Sent from my GT-I5801 using xda app-developers app
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
pathfinderhd said:
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
Click to expand...
Click to collapse
Search the JB thread in the development section. He released a build but it is old and has quite a few bugs in it which he has fixed.
I reflashed JB, then g3mod, wiped data, cache and dalvik cache. Neither CWM nor data2sd are working, but the bootscreen changed, and I don't get stuck. Can anyone help me?
ilievski.ace said:
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
Click to expand...
Click to collapse
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
ilievski.ace said:
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
Click to expand...
Click to collapse
take any tar of any rom.......remove all the files in it and place the zImage file in the provided zip into the tar file.(With the help of TOTAL COMMANDER)
process:
Install the ROM through CWM...
then go to download mode and then flash the kernel through ODIN
reboot in to recovery and clear cache & dalvik-Cache.
reboot & enjoy.
I need to upgrade a device running stock froyo(yeah!!)
Do I need to update to any gingerbread rom first before flashing CM7/9/10 as the file format is different or can it be done directly?
P.S. I do not own the device so have little knowledge about this, did try to search first but excuse me if this has been answered before(link please?)
noobwithgalaxyy said:
I need to upgrade a device running stock froyo(yeah!!)
Do I need to update to any gingerbread rom first before flashing CM7/9/10 as the file format is different or can it be done directly?
P.S. I do not own the device so have little knowledge about this, did try to search first but excuse me if this has been answered before(link please?)
Click to expand...
Click to collapse
hello dude.. you should first update to android 2.3.4 or android 2.3.6 (gingerbread) and then use it for 1 or 2 hours and let rom settle down..
then install CWM v5 and then download ur cm rom 7/9/10 or whichever you want and flash it..
do these steps to get better performance..
flash gingerbread via odin multiloader..
press thanks if it helped you..
dont forget if its is your first time to cm always format system or else you will get a boot loop
Rishabhj.official said:
hello dude.. you should first update to android 2.3.4 or android 2.3.6 (gingerbread) and then use it for 1 or 2 hours and let rom settle down..
then install CWM v5 and then download ur cm rom 7/9/10 or whichever you want and flash it..
do these steps to get better performance..
flash gingerbread via odin multiloader..
press thanks if it helped you..
Click to expand...
Click to collapse
also wipe data reset and chache partition and then go to advanced and wide dalvik chache and then battery stats..
then go back to mount and storage and there format system/ data / and chache..
and then wide data reset and chahe again and then flash rom
and then after installing rom wide data reset and chache angain and reboot system now..
its all..
best of luck BOF....
hello guyz please help me
i tried to install my rom on my note 10.1 i have built it via didxa kitchen after i install it and reboot my device my device bootlop and it cant boot now my device still on galaxy note 10.1 display i tried to flash a new ftimware and nothung change and i try to restore from nandroid backup frrom revovery also nothing change please help me what should i do and what happened to my device
Did you try to flash a stock rom with odin? I would start there.
yeah i try and the same i try to flash ARHD via recovery and its works but it also bootloop but on samsung logo screen
Dont know which model you have but might be just a kernel or modem issue.
rail205 said:
dont know which model you have but might be just a kernel or modem issue.
Click to expand...
Click to collapse
n8010 i try to flash a kernel and the same how i can fix the modem and thank for replying
8010 has no modem as far as I know. Hopefully someone with more knowledge can help you out.
When flashing arhd did you do full wipe (data, cache, dalvik, system)?
Yeah sure
bilal.23 said:
Yeah sure
Click to expand...
Click to collapse
Try doing the following :
1. Flash an ICS Stock from first from Sammobile.( Through Odin)
2. Probably it will get you in a bootloop again.
3. Within this bootloop go into stock 3e recovery & flash CWM.(Through Odin)
4. Go into CWM & Wipe Data, Cache & Dalvick.
5. Reboot.
i have a question what will hapen if i use pit file
bilal.23 said:
i have a question what will hapen if i use pit file
Click to expand...
Click to collapse
The above steps should be the cure to your problem, just follow these steps.
A lot of thanks bro you made my day today i flash the ics rom and its works really i dont now how to thank you الله يعطيك العافية و يطول بعمرك و عيد سعيد
bilal.23 said:
A lot of thanks bro you made my day today i flash the ics rom and its works really i dont now how to thank you الله يعطيك العافية و يطول بعمرك و عيد سعيد
Click to expand...
Click to collapse
Have gone through this several times before, that`s the reason i know it by hard how to overcome it.
Glad could be of Help. Eid Saeed
bro i have a question y i still cant install a jelly bean version on my device i try to install a one through odin and the device stuck on samsnug galaxy note display and i try to update through OTA but it opens recovery then its give an erroe what should i do
bilal.23 said:
bro i have a question y i still cant install a jelly bean version on my device i try to install a one through odin and the device stuck on samsnug galaxy note display and i try to update through OTA but it opens recovery then its give an erroe what should i do
Click to expand...
Click to collapse
Have you tried the above steps with Jelly bean rom ?
Yeah bro the same but it stucks on galaxy note screen
bilal.23 said:
Yeah bro the same but it stucks on galaxy note screen
Click to expand...
Click to collapse
Try installing a custom rom, use Philz Recovery http://forum.xda-developers.com/showthread.php?t=2202714 & before installing the rom use the option " Wipe Data/Factory Reset-------- Clean to install new Rom, then install your custom rom
lsherif said:
Try installing a custom rom, use Philz Recovery http://forum.xda-developers.com/showthread.php?t=2202714 & before installing the rom use the option " Wipe Data/Factory Reset-------- Clean to install new Rom, then install your custom rom
Click to expand...
Click to collapse
Thank u bro i try to restore from a backup and the same the backup is fior omega roma and the same its still on samsung galaxy note screen and in all ways i will try a new rom
lsherif said:
Try doing the following :
1. Flash an ICS Stock from first from Sammobile.( Through Odin)
2. Probably it will get you in a bootloop again.
3. Within this bootloop go into stock 3e recovery & flash CWM.(Through Odin)
4. Go into CWM & Wipe Data, Cache & Dalvick.
5. Reboot.
Click to expand...
Click to collapse
I tried this and it did not work for me. To rewind a bit, i was drinking last night and decided to root my note 10.1 n8013.
Now it says "Samsung" and that is all it does. I am hoping that there is a way to get it working again. I tried to install a "factory" kernel and it failed. Any help would be greatly appreciated.
lsherif said:
Try installing a custom rom, use Philz Recovery http://forum.xda-developers.com/showthread.php?t=2202714 & before installing the rom use the option " Wipe Data/Factory Reset-------- Clean to install new Rom, then install your custom rom
Click to expand...
Click to collapse
I tried bro and its bootlop on samsung screen
and elso in ics rom its give always factory test fc and there isnt a lock screen when i press the power button its always turn on without give a screen to draw my pattern and when i press a long time on power button its always turn off without aany options that's y i want to return to jb
hey guys
my first post on xda actually yesterday i updated my xgamerz v2.2 rom to xgamerz v3 using clockworkmod recovery v6.0.28 everything else worked fine except it vant reboot into recovery ... i CAN reboot in download mode but not recovery.
when i reboot into recovery the samsung galaxy sl page slowly fades away and again reboots the phone into normal mode without going to recovery ( i.e. directly loading to os )
plz help asap
for now do a clean flash from ddlf2 then upgrade v3.. your problem will get solved.. and always wipe dalvik cache and format the system when upgrading the same custom rom. if you are going to any other custom rom just do full clean flash form ddlf2.. so that the rom won't cause any problem in your day to day life..
hope this helps you.
maxs8007 said:
for now do a clean flash from ddlf2 then upgrade v3.. your problem will get solved.. and always wipe dalvik cache and format the system when upgrading the same custom rom. if you are going to any other custom rom just do full clean flash form ddlf2.. so that the rom won't cause any problem in your day to day life..
hope this helps you.
Click to expand...
Click to collapse
you mean go back to gingerbread 2.3.6 then flash cm10 and then xgamerz with all user data gone
instead of doing all this , i was wondering if i could flash a recovery using nandroid manager app( it has an option to flash recovery) but iam not getting a proper download link for my firmware. . . plz guide
try this : https://googledrive.com/host/0B4xN9...3.0/kernel-cm-10-20130906-galaxysl-signed.zip . and if this didn't work then you'll need to do a clean flash. just do titanium backup of all apps and also backup all you contacts and messages. restore them when you flash v3. you'll get all your userdata and apps as it is. and no need to flash cm10 after ddlf2, just directly flash v3 after flashing ddlf2 ( v3 is based on cm10, so no need to flash that)
if this didn't work then you'll need to do a clean flash. just do titanium backup of all apps and also backup all you contacts and messages. restore them when you flash v3. you'll get all your userdata and apps as it is. and no need to flash cm10 after ddlf2, just directly flash v3 after flashing ddlf2 ( v3 is based on cm10, so no need to flash that) [/QUOTE]
i have downloaded it but neither rom tool box nor
nandroid manager app is able to restore it... will u plz tell me how to use it.
maxs8007 said:
for now do a clean flash from ddlf2 then upgrade v3.. your problem will get solved.. and always wipe dalvik cache and format the system when upgrading the same custom rom. if you are going to any other custom rom just do full clean flash form ddlf2.. so that the rom won't cause any problem in your day to day life..
hope this helps you.
Click to expand...
Click to collapse
reply
try this application : https://play.google.com/store/apps/details?id=com.cgollner.flashify if this didn't work then you'll not have any other way except clean flash. till my knowledge I think it's not possible to flash any recovery on jb ROM's due to different partitioning. i'll still suggest you to do a full app backup with titanium backup and restore it when you flash v3. happy flashing
maxs8007 said:
try this application : https://play.google.com/store/apps/details?id=com.cgollner.flashify if this didn't work then you'll not have any other way except clean flash. till my knowledge I think it's not possible to flash any recovery on jb ROM's due to different partitioning. i'll still suggest you to do a full app backup with titanium backup and restore it when you flash v3. happy flashing
Click to expand...
Click to collapse
nope that didnt work :'(
go to xgamers v3 page ( forum.xda-developers.com/showthread.php?t=2192613) and read the 3rd post which says " IMPORTANT! READ BEFORE FLASHING
THIS RELEASE!" you'll come to know what I'm trying to tell you since beginning.. most important : 1st and 5th point.
;Its my first thread on xda
ROM Name- CleanKat V4.0
Device- Huawei Honor Holly (Ported it from Walton Primo GF2)
ROM Developer- Umang Leekha
ROM Porter- Waseem Maya
For Internal Storage Bug Fixing - Muhammad Waqas Hameed
If I forgot someone then tell me....!
Features
1. Based on AOSP KITKAT
2.Better battery life than other KK
ROMs, stock kernel
3.Added data traffic monitor in settings,
you can toggle it
4.Added 13 new battery icon styles in
settings, ported from carbon rom
5.Beautiful Cleankat lockscreen,
screenshot attached
6.Beautiful Cleankat bootanimation and
bootlogo
7.Cleankat music player, advanced
calculator and browser
And....!
And.........!
And...............!
Many More.............!
Now Come to the main thread...!
Hello Guys....!
Now presenting You CLEAN KAT V4 for HUAWEI HONOR HOLLY
PURE AOSP 4.4 (Kitkat)
Ported by Waseem Maya (ME)
Instructions to Install:
Go Into Philz Touch Recovery
Select Wipa & Data
Select Clean To Install a New Rom
Select Install Zip from SD Card
Select Clean Kat V4
Install it....
Done
After Install
Clear Cache & Dalvik Cache
Bugs:
It has no bug...!
Engineering Mode:
MTK Enginnering Mode APK Iin Attachment....!
you can increase sound level of your phone in Engineering Mode...!
If you found any bugs please inform me.....!
Download Link:
http://d-h.st/1w68
Please add this rom on Huawei Honor Holly main page
Great work! Can you list the features of this ROM?
fiorezy said:
Great work! Can you list the features of this ROM?
Click to expand...
Click to collapse
Ok wait
Sent from my Hol-U19 using Tapatalk
thanks for your accomplishment
does it support Arabic language completely
does it include GAPPS or i need to flash them seperately
can i install it thru twrp recovery ? if yes how ?
best regards
I dont know if it supports Arabic or not and you dont need flash gapps its already included yes you can flash using twrp band do wipe data factory reset and install after install clear cache and dalvik cache.... Now reboot...! Done
Sent from my Hol-U19 using Tapatalk
waseemmayaa said:
I dont know if it supports Arabic or not and you dont need flash gapps its already included yes you can flash using twrp band do wipe data factory reset and install after install clear cache and dalvik cache.... Now reboot...! Done
Sent from my Hol-U19 using Tapatalk
Click to expand...
Click to collapse
how can i check if it support Arabic before flashing it ? any idea
musafercom said:
how can i check if it support Arabic before flashing it ? any idea
Click to expand...
Click to collapse
I'm gonna test it then I will tell you
fiorezy said:
I'm gonna test it then I will tell you
Click to expand...
Click to collapse
Bootloop
EDIT: I fixed it after changing boot.img with stock.
Great ROM and very smooth, btw it SUPPORTS ARABIC!
fiorezy said:
Bootloop
EDIT: I fixed it after changing boot.img with stock.
Great ROM and very smooth, btw it SUPPORTS ARABIC!
Click to expand...
Click to collapse
CAN YOU EXPLAIN MORE.
JUST TO MAKE SURE DOES IT SUPPORT ARABIC FULLY.
WHAT IS btw ?
I AM ON STOCK ROM
MY DEVICE IS ROOTED AND ON TWRP RECOVERY WHAT SHOULD I DO IN STEPS TO FLASH THIS ROM WITHOUT GETTING STOCK IN A BOOT LOOP IF YOU GREATLY RECOMMEND THE ROM AND ITS STABLE WITHOUT BUGS AND HOW TO GO BACK TO STOCK ROM IF I DO NOT LIKE OR IF SOMETHING GO WRONG.
THANKS & BEST REGARDS
musafercom said:
CAN YOU EXPLAIN MORE.
JUST TO MAKE SURE DOES IT SUPPORT ARABIC FULLY.
WHAT IS btw ?
I AM ON STOCK ROM
MY DEVICE IS ROOTED AND ON TWRP RECOVERY WHAT SHOULD I DO IN STEPS TO FLASH THIS ROM WITHOUT GETTING STOCK IN A BOOT LOOP IF YOU GREATLY RECOMMEND THE ROM AND ITS STABLE WITHOUT BUGS AND HOW TO GO BACK TO STOCK ROM IF I DO NOT LIKE OR IF SOMETHING GO WRONG.
THANKS & BEST REGARDS
Click to expand...
Click to collapse
btw= by the way
I already tried this ROM and i'm sure that it fully supports Arabic, It was very smooth and handy, I used it for short minutes then I went back to MIUI because I didn't like the full grey design.
To install it, first at all, copy the zip file on your SD card, Boot into recovery mod, backup you current ROM to SD card in case something wrong happened. After that, wipe data and cache then flash Clean Kat, finally wipe dalvik cache and tap reboot system.
In case you got bootloop or you didn't like Clean Kat, just go back to twrp and restore your backup.
fiorezy said:
btw= by the way
i already tried this rom and i'm sure that it fully supports arabic, it was very smooth and handy, i used it for short minutes then i went back to miui because i didn't like the full grey design.
To install it, first at all, copy the zip file on your sd card, boot into recovery mod, backup you current rom to sd card in case something wrong happened. After that, wipe data and cache then flash clean kat, finally wipe dalvik cache and tap reboot system.
In case you got bootloop or you didn't like clean kat, just go back to twrp and restore your backup.
Click to expand...
Click to collapse
do i need to fatctory reset ?
Does that mean i do not need stock recovery to do that.
How to go to twrp recovery if i got a bootloob
musafercom said:
do i need to fatctory reset ?
Does that mean i do not need stock recovery to do that.
How to go to twrp recovery if i got a bootloob
Click to expand...
Click to collapse
Don't do factory reset, just install twrp first
Go to this thread and you will find many useful things
fiorezy said:
don't do factory reset, just install twrp first
go to this thread and you will find many useful things
Click to expand...
Click to collapse
i have twrp already
thanks
How was the rom ( CleanKat ) now I am porting Resurrection Remix 5.1.1 for HHH but there are bugs in it....!
Sent from my Hol-U19 using XDA Free mobile app
waseemmayaa said:
How was the rom ( CleanKat ) now I am porting Resurrection Remix 5.1.1 for HHH but there are bugs in it....!
Sent from my Hol-U19 using XDA Free mobile app
Click to expand...
Click to collapse
Clean Kat was very smooth, no bugs so far, didn't use it for much time, but I think everything is working fine, besides a liitle bug when scrolling through Download files, and there is no option to disable soft keys.
You can disable it by editing build.prop
Sent from my Hol-U19 using XDA Free mobile app
Help me pls. My phone is on bootloop after flashing cleankat rom. How can i replace the boot.img of cleankat rom to stock boot.img?i have no.pc,only phone. I tried moving stock boot.img to cleankat rom using xplore but it corrypt the zip file. Pls help
yuansmart said:
Help me pls. My phone is on bootloop after flashing cleankat rom. How can i replace the boot.img of cleankat rom to stock boot.img?i have no.pc,only phone. I tried moving stock boot.img to cleankat rom using xplore but it corrypt the zip file. Pls help
Click to expand...
Click to collapse
Give me your stock boot.img, I will try to upload for you the whole ROM tomorrow
How can i fimd my stock boot.img?pls