hello guyz please help me
i tried to install my rom on my note 10.1 i have built it via didxa kitchen after i install it and reboot my device my device bootlop and it cant boot now my device still on galaxy note 10.1 display i tried to flash a new ftimware and nothung change and i try to restore from nandroid backup frrom revovery also nothing change please help me what should i do and what happened to my device
Did you try to flash a stock rom with odin? I would start there.
yeah i try and the same i try to flash ARHD via recovery and its works but it also bootloop but on samsung logo screen
Dont know which model you have but might be just a kernel or modem issue.
rail205 said:
dont know which model you have but might be just a kernel or modem issue.
Click to expand...
Click to collapse
n8010 i try to flash a kernel and the same how i can fix the modem and thank for replying
8010 has no modem as far as I know. Hopefully someone with more knowledge can help you out.
When flashing arhd did you do full wipe (data, cache, dalvik, system)?
Yeah sure
bilal.23 said:
Yeah sure
Click to expand...
Click to collapse
Try doing the following :
1. Flash an ICS Stock from first from Sammobile.( Through Odin)
2. Probably it will get you in a bootloop again.
3. Within this bootloop go into stock 3e recovery & flash CWM.(Through Odin)
4. Go into CWM & Wipe Data, Cache & Dalvick.
5. Reboot.
i have a question what will hapen if i use pit file
bilal.23 said:
i have a question what will hapen if i use pit file
Click to expand...
Click to collapse
The above steps should be the cure to your problem, just follow these steps.
A lot of thanks bro you made my day today i flash the ics rom and its works really i dont now how to thank you الله يعطيك العافية و يطول بعمرك و عيد سعيد
bilal.23 said:
A lot of thanks bro you made my day today i flash the ics rom and its works really i dont now how to thank you الله يعطيك العافية و يطول بعمرك و عيد سعيد
Click to expand...
Click to collapse
Have gone through this several times before, that`s the reason i know it by hard how to overcome it.
Glad could be of Help. Eid Saeed
bro i have a question y i still cant install a jelly bean version on my device i try to install a one through odin and the device stuck on samsnug galaxy note display and i try to update through OTA but it opens recovery then its give an erroe what should i do
bilal.23 said:
bro i have a question y i still cant install a jelly bean version on my device i try to install a one through odin and the device stuck on samsnug galaxy note display and i try to update through OTA but it opens recovery then its give an erroe what should i do
Click to expand...
Click to collapse
Have you tried the above steps with Jelly bean rom ?
Yeah bro the same but it stucks on galaxy note screen
bilal.23 said:
Yeah bro the same but it stucks on galaxy note screen
Click to expand...
Click to collapse
Try installing a custom rom, use Philz Recovery http://forum.xda-developers.com/showthread.php?t=2202714 & before installing the rom use the option " Wipe Data/Factory Reset-------- Clean to install new Rom, then install your custom rom
lsherif said:
Try installing a custom rom, use Philz Recovery http://forum.xda-developers.com/showthread.php?t=2202714 & before installing the rom use the option " Wipe Data/Factory Reset-------- Clean to install new Rom, then install your custom rom
Click to expand...
Click to collapse
Thank u bro i try to restore from a backup and the same the backup is fior omega roma and the same its still on samsung galaxy note screen and in all ways i will try a new rom
lsherif said:
Try doing the following :
1. Flash an ICS Stock from first from Sammobile.( Through Odin)
2. Probably it will get you in a bootloop again.
3. Within this bootloop go into stock 3e recovery & flash CWM.(Through Odin)
4. Go into CWM & Wipe Data, Cache & Dalvick.
5. Reboot.
Click to expand...
Click to collapse
I tried this and it did not work for me. To rewind a bit, i was drinking last night and decided to root my note 10.1 n8013.
Now it says "Samsung" and that is all it does. I am hoping that there is a way to get it working again. I tried to install a "factory" kernel and it failed. Any help would be greatly appreciated.
lsherif said:
Try installing a custom rom, use Philz Recovery http://forum.xda-developers.com/showthread.php?t=2202714 & before installing the rom use the option " Wipe Data/Factory Reset-------- Clean to install new Rom, then install your custom rom
Click to expand...
Click to collapse
I tried bro and its bootlop on samsung screen
and elso in ics rom its give always factory test fc and there isnt a lock screen when i press the power button its always turn on without give a screen to draw my pattern and when i press a long time on power button its always turn off without aany options that's y i want to return to jb
Related
I got two problems with my i9003.
1. I want to wipe my data but I can't.
I tried to wipe data in CWM recovery mode. and I tried to reset my phone. But both of those methods didn't work.
2. The home button is malfunction.
It can awake up to phone but I can't back to home (launcher). Besides, long press home button also malfunction either. No recent tasks show.
P.S. I used odin to install the latest stock firmware and used CT-Root method to install CWM.
:crying: Does anyone have same experience? Plz help me :crying: :crying:
flash cwm again and try.
realzahed said:
flash cwm again and try.
Click to expand...
Click to collapse
I tried a lot of times, but failed. :crying:
xdacmkkiki said:
P.S. I used odin to install the latest stock firmware and used CT-Root method to install CWM.
Click to expand...
Click to collapse
Try doing a clean install ... that is
1st flash xxkpe using guide from here and download xxkpe from here
After this try flashing whatever latest stock rom. I'd advise to go for ddlf2, as it's pretty stable and other fellow devs have ported a lot of stuff for this firmware.
All the best !:good:
i was facing the same problem but i think it shows more on xxkpq flash another like rom ddkp3 or ddlf2.
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
wipe cacche dalvik cache , factory reset
flash the ROM again
again wipe all...:good::fingers-crossed:
try it
Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
You shld ask this in dev section under angeeks ROM thread
vipul12389mehta said:
You shld ask this in dev section under angeeks ROM thread
Click to expand...
Click to collapse
Hey buddy, he is not able to post in Dev section due to NewBie.
Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
Hey have u flashed the rom on some other kernal if yes den try flashing the nordic firmware(XXLQ9) n den flash the rom
Hit thanks if i helped you
hasanjaved said:
wipe cacche dalvik cache , factory reset
flash the ROM again
again wipe all...:good::fingers-crossed:
try it
Click to expand...
Click to collapse
I have done than before and after flashing the ROM, but will give it another try
Thanks
Kartik pat said:
Hey have u flashed the rom on some other kernal if yes den try flashing the nordic firmware(XXLQ9) n den flash the rom
Hit thanks if i helped you
Click to expand...
Click to collapse
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Badboy800 said:
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Click to expand...
Click to collapse
Can you please explain the steps in detail which you have followed, so that i can try to help...
Badboy800 said:
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Click to expand...
Click to collapse
Ill tell u my steps what i did:
First i reverted back to gb using cwm backup den i did a factory reset n wiped cache.. Den i flashed the stock nordic firmware n den flashed the rom n before rebooting the device i wiped cache n delvik cache.. And it worked for me try dis if i want to
Hit thanks if i helped you
mj.vikram said:
Can you please explain the steps in detail which you have followed, so that i can try to help...
Click to expand...
Click to collapse
Okey, i came from Blueberry ROM 1.0 and here is the steps i followed:
1: Flashed the Nordic I9103XXLQ9 ROM USIN Odin v3.07
2. Booted up once to the rom to check if its had installed correctly
3. Flashed CMW 4.0.0.1 with Odin
4. Done a factory reset, wiped cache and dalvik cache
5. Flashed the Rom and after the process was complete from CMW, i restarted the phone but got stock on the Galaxy R splash screen and the phone restarted back to CMW.
6. Tried to wipe cache and dalvic cache again but still the phone wont boot up.
its so weird!
Kartik pat said:
Ill tell u my steps what i did:
First i reverted back to gb using cwm backup den i did a factory reset n wiped cache.. Den i flashed the stock nordic firmware n den flashed the rom n before rebooting the device i wiped cache n delvik cache.. And it worked for me try dis if i want to
Hit thanks if i helped you
Click to expand...
Click to collapse
Yes that may work, i will try it today.
Thanks buddy
Badboy800 said:
Okey, i came from Blueberry ROM 1.0 and here is the steps i followed:
1: Flashed the Nordic I9103XXLQ9 ROM USIN Odin v3.07
2. Booted up once to the rom to check if its had installed correctly
3. Flashed CMW 4.0.0.1 with Odin
4. Done a factory reset, wiped cache and dalvik cache
5. Flashed the Rom and after the process was complete from CMW, i restarted the phone but got stock on the Galaxy R splash screen and the phone restarted back to CMW.
6. Tried to wipe cache and dalvic cache again but still the phone wont boot up.
its so weird!
Click to expand...
Click to collapse
Are you selecting Install zip file/update from Zip option in CWM, Sorry for asking the silly Question because i just want to confirm it...
mj.vikram said:
Are you selecting Install zip file/update from Zip option in CWM, Sorry for asking the silly Question because i just want to confirm it...
Click to expand...
Click to collapse
Its okey Yess i do. I manage to flash it from both cmw versions so i dont think the problem is there. Should i go back to GB and then try the process?
Badboy800 said:
Its okey Yess i do. I manage to flash it from both cmw versions so i dont think the problem is there. Should i go back to GB and then try the process?
Click to expand...
Click to collapse
First, u are coming from deodexed Rom.
Do one thing.. just install ur backup(if u took that one). Then install xxql9 using odin v 3.07(do run as administrator) & Then let it boot. Switch off the mobile and After that install CMW v4 & Then let it boot again. Again switch off ur mobile. Go to recovery install MOD rom. Dont wipe anything. It will do it by itself. Boot again. Let feel happy..
Sent from my GT-I9103 using xda premium
How to install this rom on stock GB?
I am currently on stock GB (Indian vesion). Can I directly flash this rom via CWM 4?? The Q&A in rom's post says there is no need to flash XXLQ9 first, but everyone is suggesting to flash that first?
vivekmaru said:
I am currently on stock GB (Indian vesion). Can I directly flash this rom via CWM 4?? The Q&A in rom's post says there is no need to flash XXLQ9 first, but everyone is suggesting to flash that first?
Click to expand...
Click to collapse
Yaa it will be better if you flash XXLQ9 first and then the rom so that u can enjoy all the features!!
Hit Thanks If I Helped You
Kartik pat said:
Yaa it will be better if you flash XXLQ9 first and then the rom so that u can enjoy all the features!!
Hit Thanks If I Helped You
Click to expand...
Click to collapse
Well.. I already flashed the Angeek's ROM via CMW before you replied and the ROM seem to work fine. Any idea on what features I may be missing on?
I had rooted my phone, and did use Jelly Blast for a while worked perfect. After a few days I tried installing mods through cwm which led to boot loops. I used odin and got stock ROM for my phone . Now when I tried installing Nemesis ROM, I followed all steps right but though it shows Nemesis boot picture, it still boots into the stock OS.
Update ur cwm version
Flash ur rom again
It will ask u to disable stock recovery say yes
This should fix ur problem:thumbup:
Hit thanks if i helped
Sent from my GT-S7500
[email protected] said:
Update ur cwm version
Flash ur rom again
It will ask u to disable stock recovery say yes
This should fix ur problem:thumbup:
Hit thanks if i helped
Sent from my GT-S7500
Click to expand...
Click to collapse
Hey I'm a noob. By flash your rom, do you suggest to flash the same nemesis rom again? And what will ask me to disable stock recovery? I have cwm version 5.0.2.6 right now.
try this
wipe data
wipe cache
wife dalvik cache
install stock rom via odin
then install your desired rom via cwm
Sent from my GT-S5302 using xda premium
DJDSB said:
try this
wipe data
wipe cache
wife dalvik cache
install stock rom via odin
then install your desired rom via cwm
Sent from my GT-S5302 using xda premium
Click to expand...
Click to collapse
I have tried the following steps:
1. Odin stock rom: I just have pda,csc and modem. I do not have bootloader and pit.
2. Then went to Recovery and installed CWM
3. Installed custom rom JELLY Blast which previously had no issues. (Before this I wiped data,cache & dalvik)
4. Result - > Stuck on Samsung screen.
After which I cannot get back to any recovery mode anymore, it is stuck on samsung screen. All I have to do is go back to download mode and odin it again. But I really want to be back on custom roms
pavitar said:
Hey I'm a noob. By flash your rom, do you suggest to flash the same nemesis rom again? And what will ask me to disable stock recovery? I have cwm version 5.0.2.6 right now.
Click to expand...
Click to collapse
Yes u have to install rom by normal way
Updare your cwm to V6
Cwm will ask u to disable it
This may help u:thumbup:
Hit thanks if i helped
Sent from my GT-S7500
Generic Rom Flashing Issues
pavitar said:
I had rooted my phone, and did use Jelly Blast for a while worked perfect. After a few days I tried installing mods through cwm which led to boot loops. I used odin and got stock ROM for my phone . Now when I tried installing Nemesis ROM, I followed all steps right but though it shows Nemesis boot picture, it still boots into the stock OS.
Click to expand...
Click to collapse
Hi,
This is not your phone issue alone but any phone can face this. To reproduce this issue, it takes more than what you have mentioned. But the solution comes through if you follow these steps just as listed by me here:
1. Get an older version of official Samsung Firmware (preferably 1 or 2 versions older than the latest one)
2. Flash this using ODIN (if flashing fails at any point via ODIN user an even older Stock Firmware version)
3. If you can boot into the Rom fine, reboot to its Stock Recovery
4. From Stock recover, start the CWM.zip that you have (version 5 or 6 whichever lets you load fine, does not matter at this point)
5. When inside CWM, go into Advanced and select "Fix Permissions"
6. Only after you have fixed permissions, go ahead and do the Wipes in the order below
7. Wipe Dalvik Cache, Wipe Cache, Wipe Data
8. Once this is done, load the custom ROM you want to install from this CWM session
9. After install, when you go for reboot, see if you get any option that says something like "prevent from flashing stock recovery" or so, say yes to it.
This should fix any permission issue that may be preventing you to get to your favorite ROM from stock ROM.
Let me know if this helps or if I can help you further.
Glad if this helped you in any way !
NOTE: THIS IS GENERIC AND NOT SPECIFIC TO ANY ONE PHONE MODEL.
keeploving said:
Hi,
This is not your phone issue alone but any phone can face this. To reproduce this issue, it takes more than what you have mentioned. But the solution comes through if you follow these steps just as listed by me here:
1. Get an older version of official Samsung Firmware (preferably 1 or 2 versions older than the latest one)
2. Flash this using ODIN (if flashing fails at any point via ODIN user an even older Stock Firmware version)
3. If you can boot into the Rom fine, reboot to its Stock Recovery
4. From Stock recover, start the CWM.zip that you have (version 5 or 6 whichever lets you load fine, does not matter at this point)
5. When inside CWM, go into Advanced and select "Fix Permissions"
6. Only after you have fixed permissions, go ahead and do the Wipes in the order below
7. Wipe Dalvik Cache, Wipe Cache, Wipe Data
8. Once this is done, load the custom ROM you want to install from this CWM session
9. After install, when you go for reboot, see if you get any option that says something like "prevent from flashing stock recovery" or so, say yes to it.
This should fix any permission issue that may be preventing you to get to your favorite ROM from stock ROM.
Let me know if this helps or if I can help you further.
Glad if this helped you in any way !
NOTE: THIS IS GENERIC AND NOT SPECIFIC TO ANY ONE PHONE MODEL.
Click to expand...
Click to collapse
Thanks a Ton, this helped me. The only step I did not perform earlier is Fix Permissions.
Hi,
I am unable to Install any custom roms in Samsung galaxy Tab 2( Gt-P3110 ). When ever a custom Rom is placed, It either gets stuck in the Samsung logo, or just shows a 'Blank' Screen and hangs on that screen. After this i have to reflash the stock firmware to get the tab up again... (i do perform the wipe data/cache..then wipe cache. then wipe dalvik cache in this order before flashing the ROM)
The details of the tab are:
Model- GT-P3110 ( Galaxy tab 2 , wifi only )
android version-4.1.2
Build number-JZO54K.P3110DCMA4
Recovery: PhilZ Touch 6 Recovery ( Based on CWM Base version: v6.0.4.5 )
Rooted: Yes
Even the backups made are not complete, restoring a backup restores the tab to factory reset.
(it does say failed to find partition /recovery and /data for a very short time before starting the backup).
I am using a windows 7 system for this.
Thanks for the help...
Regards
akshaydogra said:
Hi,
I am unable to Install any custom roms in Samsung galaxy Tab 2( Gt-P3110 ). When ever a custom Rom is placed, It either gets stuck in the Samsung logo, or just shows a 'Blank' Screen and hangs on that screen. After this i have to reflash the stock firmware to get the tab up again... (i do perform the wipe data/cache..then wipe cache. then wipe dalvik cache in this order before flashing the ROM)
The details of the tab are:
Model- GT-P3110 ( Galaxy tab 2 , wifi only )
android version-4.1.2
Build number-JZO54K.P3110DCMA4
Recovery: PhilZ Touch 6 Recovery ( Based on CWM Base version: v6.0.4.5 )
Rooted: Yes
Even the backups made are not complete, restoring a backup restores the tab to factory reset.
(it does say failed to find partition /recovery and /data for a very short time before starting the backup).
I am using a windows 7 system for this.
Thanks for the help...
Regards
Click to expand...
Click to collapse
change your recovery, find it HERE
150208 said:
change your recovery, find it HERE
Click to expand...
Click to collapse
Hi,
Thanks for the reply.. I am downloading TWRP 2.7.0.0 and will try this out.. Will update the results soon.
UPDATE::
I used the Flashable-ZIP GT-P3110_TWRP_2.7.0.0.zip but now, the tab is again stuck on the samsung logo..
UPDATE2::
Flashed GT-P3110_CWM_6.0.4.7_Swipe-Edition.tar.md5 using ODIN, now tab is booting up.. but only into recovery.
akshaydogra said:
Hi,
Thanks for the reply.. I am downloading TWRP 2.7.0.0 and will try this out.. Will update the results soon.
UPDATE::
I used the Flashable-ZIP GT-P3110_TWRP_2.7.0.0.zip but now, the tab is again stuck on the samsung logo..
UPDATE2::
Flashed GT-P3110_CWM_6.0.4.7_Swipe-Edition.tar.md5 using ODIN, now tab is booting up.. but only into recovery.
Click to expand...
Click to collapse
flash the rom again
make sure you wipe everything before flash to prevent any errors
150208 said:
flash the rom again
make sure you wipe everything before flash to prevent any errors
Click to expand...
Click to collapse
:crying: noluck
I performed the following steps:
1- wiped data/cache
2-wipe cache
2.a- wiped dalvik cache
3-install slim rom with its corresponding gapps ( both installed successfully )
4-reboot system
Now the tab is stuck again on the 'samsung logo' screen.. i gess i will have to flash the stock firmware again for this to work.. :crying:
akshaydogra said:
:crying: noluck
I performed the following steps:
1- wiped data/cache
2-wipe cache
2.a- wiped dalvik cache
3-install slim rom with its corresponding gapps ( both installed successfully )
4-reboot system
Now the tab is stuck again on the 'samsung logo' screen.. i gess i will have to flash the stock firmware again for this to work.. :crying:
Click to expand...
Click to collapse
Iv flashed the stock firmware, and the tab is now non rooted.. Please share the steps that need to be performed, preferably for cyanogen mod ... my odin counter is already @ 25..
:crying::crying::crying:
akshaydogra said:
Iv flashed the stock firmware, and the tab is now non rooted.. Please share the steps that need to be performed, preferably for cyanogen mod ... my odin counter is already @ 25..
:crying::crying::crying:
Click to expand...
Click to collapse
what costum rom did you tried to install?
============
ROOT and update recovery:
HERE is the fastest way to root
reboot to recovery, and flash latest recovery again from HERE
reboot and go to recovery again.
Flashing roms:
Do a back up of important data/rom, place it inside your pc
Inside recovery:
Wipe data
Wipe cache
Wipe dalvik cache
Format /system
Format /cache
Format /data media sdcard
Install rom
Install gapps
make sure your rom and gapps zip is in extsdcard, or else it will removed
be carefull not to format /extsdcard
above process will surely give positive results if done preciesely
150208 said:
what costum rom did you tried to install?
============
ROOT and update recovery:
HERE is the fastest way to root
reboot to recovery, and flash latest recovery again from HERE
reboot and go to recovery again.
Flashing roms:
Do a back up of important data/rom, place it inside your pc
Inside recovery:
Wipe data
Wipe cache
Wipe dalvik cache
Format /system
Format /cache
Format /data media sdcard
Install rom
Install gapps
make sure your rom and gapps zip is in extsdcard, or else it will removed
be carefull not to format /extsdcard
above process will surely give positive results if done preciesely
Click to expand...
Click to collapse
Thank you..
yas trying to install slimrom.. will now try out with cyanogen. . Will post how it goes soon..
UPDATE:
The above steps go well, till the rooting part..i installed twrp and rebooted into recovery to take backup.. the backup was sucesful.. the i booted into the rom to copy the backup files into my pc.. and tried to reboot it into recovery again.. and i again got stuck in the samsung logo screen..
akshaydogra said:
Thank you..
yas trying to install slimrom.. will now try out with cyanogen. . Will post how it goes soon..
UPDATE:
The above steps go well, till the rooting part..i installed twrp and rebooted into recovery to take backup.. the backup was sucesful.. the i booted into the rom to copy the backup files into my pc.. and tried to reboot it into recovery again.. and i again got stuck in the samsung logo screen..
Click to expand...
Click to collapse
For some reason this tab only works with Phils recovery.. for the rest. it just refuses to work.,! but the problem was that i could not get into the external memory card.. anyways.. after following the 'data wipe' instructructions.. i sideloaded cm-11-20140304-NIGHTLY-p3110.zip with its gapps..
both got installed succesfully.. However,, at first the tab went into a boot loop.. so i got into recovery again and cleared the data and cache partitions.. now.. i got stuck at a 'Blank' screen after the samsung logo.. ( its still blank after 10 mins)..
akshaydogra said:
For some reason this tab only works with Phils recovery.. for the rest. it just refuses to work.,! but the problem was that i could not get into the external memory card.. anyways.. after following the 'data wipe' instructructions.. i sideloaded cm-11-20140304-NIGHTLY-p3110.zip with its gapps..
both got installed succesfully.. However,, at first the tab went into a boot loop.. so i got into recovery again and cleared the data and cache partitions.. now.. i got stuck at a 'Blank' screen after the samsung logo.. ( its still blank after 10 mins)..
Click to expand...
Click to collapse
did it still blank? carefully not to flash with the charger on.
some people got bricked and to resolve that you must wait until the battery drops out and charge it again.
maybe you should clear your mind first, don't be in rush. i feel your frustating man :laugh:
if you do not add anything more in the process, i suppose with any recoveries you will succeed.
and also, it's a normal to take 10-15 min on the first boot
150208 said:
did it still blank? carefully not to flash with the charger on.
some people got bricked and to resolve that you must wait until the battery drops out and charge it again.
maybe you should clear your mind first, don't be in rush. i feel your frustating man :laugh:
if you do not add anything more in the process, i suppose with any recoveries you will succeed.
and also, it's a normal to take 10-15 min on the first boot
Click to expand...
Click to collapse
yeah brother.. i do feel frustrated this thing just wont work!! thank you for helping me out on this.. i really appreciate it..
i left it to completely drain the battery and then charge it again.. then it got stuck on the samsung logo and this time.. i did wait for 30 mins or so.. still nothing..
is there a rom you can suggest?? other than cyanogen?? il download that and try it.. i just want to get rid of the stock firmware..
akshaydogra said:
yeah brother.. i do feel frustrated this thing just wont work!! thank you for helping me out on this.. i really appreciate it..
i left it to completely drain the battery and then charge it again.. then it got stuck on the samsung logo and this time.. i did wait for 30 mins or so.. still nothing..
is there a rom you can suggest?? other than cyanogen?? il download that and try it.. i just want to get rid of the stock firmware..
Click to expand...
Click to collapse
mokee, omni rom, cm11 rom, i think they are stable enough with a great support, continuity constantly updates.
right now i'm use aosb, kind of loving the features
maybe broken EFS?
150208 said:
mokee, omni rom, cm11 rom, i think they are stable enough with a great support, continuity constantly updates.
right now i'm use aosb, kind of loving the features
Click to expand...
Click to collapse
ok.. il try out omni and aosb in order.. if omni works.. then omni it is.. ;p
Il post the results soon..
akshaydogra said:
yeah brother.. i do feel frustrated this thing just wont work!! thank you for helping me out on this.. i really appreciate it..
i left it to completely drain the battery and then charge it again.. then it got stuck on the samsung logo and this time.. i did wait for 30 mins or so.. still nothing..
is there a rom you can suggest?? other than cyanogen?? il download that and try it.. i just want to get rid of the stock firmware..
Click to expand...
Click to collapse
Maybe your EFS broken for some reason... that´s why it won´t boot into system.... you can try all roms, no rom will boot and you'll only see the samsung bootlogo...
this got reported in a german forum, because 2 guys flashed CWM 6.0.4.4-Touch on the device... CWM 6.0.4.4-Touch not released for the Tab 2 - it was for a different device and flashing that recovery brokes EFS for them.
also seems that it happens here too: http://forum.xda-developers.com/showthread.php?t=2657774
Android-Andi said:
Maybe your EFS broken for some reason... that´s why it won´t boot into system.... you can try all roms, no rom will boot and you'll only see the samsung bootlogo...
this got reported in a german forum, because 2 guys flashed CWM 6.0.4.4-Touch on the device... CWM 6.0.4.4-Touch not released for the Tab 2 - it was for a different device and flashing that recovery brokes EFS for them.
also seems that it happens here too: http://forum.xda-developers.com/showthread.php?t=2657774
Click to expand...
Click to collapse
Hi,
Thanks for jumping in.. i am new to this.. so how can i check if the EFS is broken??
i have GT-P3110_PhilZ-Touch-Recovery_6.19.6.zip as my recovery, i googled around and found that the official Clockwork build for p3110 does not support flashing of kit-kat roms.. and for some reason unknown to me,. this is the only recovery that works flawlessly..
which recovery do you suggest?? il go with that...
akshaydogra said:
Hi,
Thanks for jumping in.. i am new to this.. so how can i check if the EFS is broken??
i have GT-P3110_PhilZ-Touch-Recovery_6.19.6.zip as my recovery, i googled around and found that the official Clockwork build for p3110 does not support flashing of kit-kat roms.. and for some reason unknown to me,. this is the only recovery that works flawlessly..
which recovery do you suggest?? il go with that...
Click to expand...
Click to collapse
go to this thread http://forum.xda-developers.com/showthread.php?t=2548257
you will find the latest recovery
Mohdsultan said:
go to this thread http://forum.xda-developers.com/showthread.php?t=2548257
you will find the latest recovery
Click to expand...
Click to collapse
Thank you for this.. WIll try TWRP with Omni Rom today.. will post results in a while.. Right now at work
No Luck
I tried using GT-P3110_PhilZ-NON-Touch-Recovery_6.12.8_(Advanced-CWM).tar.md5 as recovery and flashed the omni rom as per instructions.. But the tab rebooted itself ones, and then got stuck on the samsung logo.. i dont understand what i am doing wrong.. sorry for acting like a total noob..
Please help out..
Android-Andi said:
Maybe your EFS broken for some reason... that´s why it won´t boot into system.... you can try all roms, no rom will boot and you'll only see the samsung bootlogo...
this got reported in a german forum, because 2 guys flashed CWM 6.0.4.4-Touch on the device... CWM 6.0.4.4-Touch not released for the Tab 2 - it was for a different device and flashing that recovery brokes EFS for them.
also seems that it happens here too: http://forum.xda-developers.com/showthread.php?t=2657774
Click to expand...
Click to collapse
Iv tried all the recoveries.. but the end result is always the same.. a tab stuck on samsung logo.. Please help out.. big noob here..
Hi,
I have a samsung galaxy tab p1000, running on android 2.3.3 and I accidentally wipe the system via TWRP. I searched and tried steps on how to flash its stock rom, At first it smoothly flashed the rom, but when it reboot...violaaa..my tab got bootloop And when I reboot to recovery I can't select an option two times(for example, I have selected Wipe data/factory reset, then it has an option of no and yes.. [I can't click that yes/no]. Hope you help me.. Thanks in advance
doom1221 said:
Hi,
I have a samsung galaxy tab p1000, running on android 2.3.3 and I accidentally wipe the system via TWRP. I searched and tried steps on how to flash its stock rom, At first it smoothly flashed the rom, but when it reboot...violaaa..my tab got bootloop And when I reboot to recovery I can't select an option two times(for example, I have selected Wipe data/factory reset, then it has an option of no and yes.. [I can't click that yes/no]. Hope you help me.. Thanks in advance
Click to expand...
Click to collapse
Weird... you could flash recovery again in Odin?
Craz Basics said:
Weird... you could flash recovery again in Odin?
Click to expand...
Click to collapse
Thanks for ur concern sir, I have already fixed it, thanks for reminding me to flash recovery again.. The only problem is: the screen is too hard to touch and i have noticed that, it is the common issue when rooting and flashing custom roms on samsung gt p1000. Thanks again