Related
Hi Guys,
Has anyone had this problem?
I had Creed's Rom v2.0 last month, and that worked perfect. I used it for a month.
this morning I decided to change my android rom into a new version of Creed's Rom.
I tried to boot and flash the Creed's Rom v3.0 and it's successfully flashed,,
But, whenever I try to boot my phone, I got stuck with the boot animation!!
It's never take me into the home screen??
It's keep showing me the bootanimation (Creed's Rom Text) for a long time ..,
So i decided to go back into SGFit default stock and successfully flashed it with ODIN..
When the device try to reboot, I get the same SAMSUNG bootanimation,,
it's keep rebooting the phone again and again (without any result),
And then I decide to flash the other rom., I tried "CyanogenMod 7.1",, I flashed it successfully, I do "Wipe Data / Reset" and "Wipe Cache Partition" also "Wipe Dalvik Cache" too, but whenever I try to reboot the phone, I've always got the freakin bootanimation and never take into the homescreen..
I also reformatted the memory card, still no result... :/
Any ideas please???
Boot into cwm and format system data cache dalvik
Then install a ROM using cwm
Sent from my GT-S5670 using xda premium
Aspire said:
Boot into cwm and format system data cache dalvik
Then install a ROM using cwm
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
I've do these steps clearly.. still no result..
try to wipe data, cache, format system, wipe dalvik,
INSTALL ZIP file, wipe data again, wipe cache again, then reboot...
cygnus39 said:
try to wipe data, cache, format system, wipe dalvik,
INSTALL ZIP file, wipe data again, wipe cache again, then reboot...
Click to expand...
Click to collapse
I've do it already,, still no result..
the bootanimation keep restarting again and again,, never take into homescreen..
try to flash another rom...
marbe the zip file you're downloading is corrupt or damaged...
cygnus39 said:
try to flash another rom...
marbe the zip file you're downloading is corrupt or damaged...
Click to expand...
Click to collapse
Well,, let's see.. I'll download another one..
ansyori28 said:
Well,, let's see.. I'll download another one..
Click to expand...
Click to collapse
and this time while flashing via cwm, format system (its under mounts and storage)...
a.cid said:
and this time while flashing via cwm, format system (its under mounts and storage)...
Click to expand...
Click to collapse
I know this thing..
heyy guys...
I've done everythings u said..,
I've flashed a new rom, wipe data, wipe cache, wipe dalvik, install the zip file, wipe data again, wipe cache again, then reboot...
But there is no result at all...
I still get the a bootanimation.., and now, I tried flash "CyanogenMod 7 RC5.6", and the result is nothing.., now I got the "Android" text, it's never take me into home..
Any ideas??
I had a similar problem yesterday. To me was advised to install via ODIN stock ROM (S5670XXKPI) which has 4 files. I did it, and the system is booted. Then I changed stosk and other custom ROM and everything works OK.
ZmisiS said:
I had a similar problem yesterday. To me was advised to install via ODIN stock ROM (S5670XXKPI) which has 4 files. I did it, and the system is booted. Then I changed stosk and other custom ROM and everything works OK.
Click to expand...
Click to collapse
where u get that stock rom (S5670XXKPI) ?? I'll try to flash it..
hi dear the same problem i have been faced early and don't worry at all. first of all your sim card and memory card eject of the phone.go to recovery mode (cwm or stock recovery) then wipe cache and factory reset first than flash stock rom 2.3.6 DDKT3 WITH ODIN.AFTER FLASH WIPE cache and factory reset again.
simple and i am sure you problem may be solve.....
if you any problem with stock rom updates please mail to me and i will send an link attachment to you an official stock rom .
this is my first post in this forum so i can't submit this link here
email : [email protected]
by....
pradeep170481 said:
hi dear the same problem i have been faced early and don't worry at all. first of all your sim card and memory card eject of the phone.go to recovery mode (cwm or stock recovery) then wipe cache and factory reset first than flash stock rom 2.3.6 DDKT3 WITH ODIN.AFTER FLASH WIPE cache and factory reset again.
simple and i am sure you problem may be solve.....
if you any problem with stock rom updates please mail to me and i will send an link attachment to you an official stock rom .
this is my first post in this forum so i can't submit this link here
email : [email protected]
by....
Click to expand...
Click to collapse
thanks,, but how about "S5670DXT4" ?? I'm currently downloading this version.. can I use this one?..
ansyori28 said:
where u get that stock rom (S5670XXKPI) ?? I'll try to flash it..
Click to expand...
Click to collapse
S5670XXKPI link:
http://hotfile.com/dl/145761279/c6ea6ce/S5670XXKPI.zip.html
ZmisiS said:
S5670XXKPI link:
http://hotfile.com/dl/145761279/c6ea6ce/S5670XXKPI.zip.html
Click to expand...
Click to collapse
thanks,, but how about the "S5670DXT4" version??..
Will it work?
nevermind, wrong post by me...
ansyori28 said:
thanks,, but how about the "S5670DXT4" version??..
Will it work?
Click to expand...
Click to collapse
I installed S5670XXKPI. After I installed S5670KPU, S5670XWKT2, and work for me. S5670DXKT4 I don't installed. I don't know will it work for you. I think it should.
The first you install S5670XXKPI, after you installed and the system is booted, you later install what want.
ZmisiS said:
I installed S5670XXKPI. After I installed S5670KPU, S5670XWKT2, and work for me. S5670DXKT4 I don't installed. I don't know will it work for you. I think it should.
The first you install S5670XXKPI, after you installed and the system is booted, you later install what want.
Click to expand...
Click to collapse
thanks,,
It's Working Perfectly..,
ansyori28 said:
thanks,,
It's Working Perfectly..,
Click to expand...
Click to collapse
OK. You're welcome.
Hi,
I have taken the code of G3MOD code and modded it for JB.
Also I have included the Bluetooth fix that I have done for ICS. Yeah the same fix is also available in JB.
Use this kernel with ICS & JB as the bluetooth fix is applied only to these two versions.
Try it out and let me know the comments.
Download Here
Thanks to all G3 developers.
Special Thanks to g3mod team, marcellusbe, hillbeast, cdesai.
If I forget to thank anyone it's not intended, PM me. I will thank you.
Note: I am not responsible for any damage caused to your phone (softbrick or hardbrick).
Thanks mate , Hope to see more development from your side as well ...to make G3 the best ever phone
Can you make a .tar version please? I can't flash it through CWM.... I flashed JB then without rebooting flashed this but it still didn't work... Same with gapps, they don't install for me...
I also can't flash this kernel either as it still says im on [email protected] #cm7_kernel_oc_1.8
Are we able to access CWM then?
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
BeriCud said:
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
Click to expand...
Click to collapse
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
ilievski.ace said:
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
Click to expand...
Click to collapse
When you install the ROM you should wipe the data as well but when installing the kernel you should wipe cache and dalvik cache.
Click thanks if I helped.
Thank you very much....
A small query....
If I install the kernel immediately after applying JB update then will I be able to access cwm the next time??
Thanks
kernel "bluetooth???"
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
zsolt64 said:
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
Click to expand...
Click to collapse
pmanian said:
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
Click to expand...
Click to collapse
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
@pmanian
Can you make UMS working on ICS/JB with g3mod kernel?
To all who managed to get it working: Do data2sd and CWM work? These are the key features I'm missing right now
Thanks a lot!!
Sent from my GT-I5801 using xda app-developers app
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
pathfinderhd said:
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
Click to expand...
Click to collapse
Search the JB thread in the development section. He released a build but it is old and has quite a few bugs in it which he has fixed.
I reflashed JB, then g3mod, wiped data, cache and dalvik cache. Neither CWM nor data2sd are working, but the bootscreen changed, and I don't get stuck. Can anyone help me?
ilievski.ace said:
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
Click to expand...
Click to collapse
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
ilievski.ace said:
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
Click to expand...
Click to collapse
take any tar of any rom.......remove all the files in it and place the zImage file in the provided zip into the tar file.(With the help of TOTAL COMMANDER)
process:
Install the ROM through CWM...
then go to download mode and then flash the kernel through ODIN
reboot in to recovery and clear cache & dalvik-Cache.
reboot & enjoy.
[Q] liquidsmooth rc9, with the recommended 20121212 singed gapp.
"unfortunately ** keyboard has stopped" keeps popping up. I have tried installing a new keyboard and setting it default, but it stops too.
After searching, I tried going to manage apps-keyboard and clearing data, and going to manage apps-dictionary and clearing data, which did not work.
I have done full wipe and install twice, which got the keyboard working on another install, but that is not working either....
full wipe with cwm-
factory data/reset 3x,
wipe cache 3x,
wipe dalvik cache 3x,
format sytem, data, and cache 3x each...!
Any other ideas? Can I manually delete something?
that version of gapps u are using may be the issue. I recall reading issues about incompatibility with the new 4.2 gapps? give 20120726 a try and see how u fair
icenight89 said:
that version of gapps u are using may be the issue. I recall reading issues about incompatibility with the new 4.2 gapps? give 20120726 a try and see how u fair
Click to expand...
Click to collapse
Thanks, I did try that I should have mentioned it.
I got slimbeam w/ slimgapps working, maybe I should try the slimgapps with liquid smooth??
I am also considering formatting the internal drive, and then installing the OS from Odin.
slimapps is based off the same gapps version I told u to try lol. that being said give it a go with liquidsmooth before u go giving yourself extra work with wiping internal and odi
icenight89 said:
slimapps is based off the same gapps version I told u to try lol.
Click to expand...
Click to collapse
Aha! Yeah I doubled checked, it is gapps-jb-20120726-signed.zip that I also tried...maybe I had not wiped it correctly when switching over. Also that was before I switched over to team recovery, which seems to wipe better.
Thanks again for the advice.
thanks button bro, and ur welcome :good:
Hey there!
I flashed cm10.1.3 from dirty developers but the settings gave me fc when I go to security settings.
So I cannot check the unknown sources option and hence I cannot install apps other than from play store
Also keyboard is not working so I cannot type anything
No one has faced these bugs so thought of asking it here
Any help would be appreciated
Thanks in advance!!
Alcatraz said:
Hey there!
I flashed cm10.1.3 from dirty developers but the settings gave me fc when I go to security settings.
So I cannot check the unknown sources option and hence I cannot install apps other than from play store
Also keyboard is not working so I cannot type anything
No one has faced these bugs so thought of asking it here
Any help would be appreciated
Thanks in advance!!
Click to expand...
Click to collapse
it maybe because of a dirty flash. wipe data, cache and dalvik cache and flash the rom again.
PR0707YP3 said:
it maybe because of a dirty flash. wipe data, cache and dalvik cache and flash the rom again.
Click to expand...
Click to collapse
no
I clean flashed
I had installed cm14 but now when I try to install any other ROM it installs but It is bootlooped. I have tried to full wipe but it doesn't work... Someone help.
Arcade said:
I had installed cm14 but now when I try to install any other ROM it installs but It is bootlooped. I have tried to full wipe but it doesn't work... Someone help.
Click to expand...
Click to collapse
First of all try to install stock firmware using fastboot and then install ROM
Arcade said:
I had installed cm14 but now when I try to install any other ROM it installs but It is bootlooped. I have tried to full wipe but it doesn't work... Someone help.
Click to expand...
Click to collapse
did u do a advanced clean wipe? system, data, internal storage, cache and dalvik . also u should be on the latest twrp check the build number not the upload date on the forum.
valkaizer2594 said:
did u do a advanced clean wipe? system, data, internal storage, cache and dalvik . also u should be on the latest twrp check the build number not the upload date on the forum.
Click to expand...
Click to collapse
Thats what was causing problem I dont know why but when I tried to clean install it didnt worked then I flashed cm14 again it did boot up then I flashed cm13 it also boot usp without clean flash... Thanks for your help