Database Info

[Q] Flashing update of CM9 nightly...

Hi Friends...
I have flashed "update-cm-9-20120226-NIGHTLY-crespo-signed.zip" from the official site of cyanogenmod and its works great. Now they have update on that. Could you please answer for my queries...
1.When I update to the new version, do I need to wipe data, cache....etc..?
2.Do I need to flash gapps again....?
3.When I flash the update, the applications installed will be wiped...?
Thanks

pafaisal said:
Hi Friends...
I have flashed "update-cm-9-20120226-NIGHTLY-crespo-signed.zip" from the official site of cyanogenmod and its works great. Now they have update on that. Could you please answer for my queries...
1.When I update to the new version, do I need to wipe data, cache....etc..?
2.Do I need to flash gapps again....?
3.When I flash the update, the applications installed will be wiped...?
Thanks
Click to expand...
Click to collapse
1. no
2. yes
3. no
4.

Thank you simms..... The fourth answer is too cute....

pafaisal said:
Hi Friends...
I have flashed "update-cm-9-20120226-NIGHTLY-crespo-signed.zip" from the official site of cyanogenmod and its works great. Now they have update on that. Could you please answer for my queries...
1.When I update to the new version, do I need to wipe data, cache....etc..?
2.Do I need to flash gapps again....?
3.When I flash the update, the applications installed will be wiped...?
Thanks
Click to expand...
Click to collapse
Hey, i was just wondering how you updated the cm9 latest nightly build update
Did you use is through Recovery?

A lot of Androids r similar as far as updating. If its just an update, usually u just need wipe cache and dalvik. If its a entirely different build then u will need to do a Clean Wipe. If after reboot u find no Gapps u can always just boot into recovery again and flash Gapps. Some guides will recommend doing a factory reset which will clear user data.

optimusv45 said:
A lot of Androids r similar as far as updating. If its just an update, usually u just need wipe cache and dalvik. If its a entirely different build then u will need to do a Clean Wipe. If after reboot u find no Gapps u can always just boot into recovery again and flash Gapps. Some guides will recommend doing a factory reset which will clear user data.
Click to expand...
Click to collapse
Thank you I tried that and it worked.

[Q] liquidsmooth rc9 keyboard has stopped

[Q] liquidsmooth rc9, with the recommended 20121212 singed gapp.
"unfortunately ** keyboard has stopped" keeps popping up. I have tried installing a new keyboard and setting it default, but it stops too.
After searching, I tried going to manage apps-keyboard and clearing data, and going to manage apps-dictionary and clearing data, which did not work.
I have done full wipe and install twice, which got the keyboard working on another install, but that is not working either....
full wipe with cwm-
factory data/reset 3x,
wipe cache 3x,
wipe dalvik cache 3x,
format sytem, data, and cache 3x each...!
Any other ideas? Can I manually delete something?

that version of gapps u are using may be the issue. I recall reading issues about incompatibility with the new 4.2 gapps? give 20120726 a try and see how u fair

icenight89 said:
that version of gapps u are using may be the issue. I recall reading issues about incompatibility with the new 4.2 gapps? give 20120726 a try and see how u fair
Click to expand...
Click to collapse
Thanks, I did try that I should have mentioned it.
I got slimbeam w/ slimgapps working, maybe I should try the slimgapps with liquid smooth??
I am also considering formatting the internal drive, and then installing the OS from Odin.

slimapps is based off the same gapps version I told u to try lol. that being said give it a go with liquidsmooth before u go giving yourself extra work with wiping internal and odi

icenight89 said:
slimapps is based off the same gapps version I told u to try lol.
Click to expand...
Click to collapse
Aha! Yeah I doubled checked, it is gapps-jb-20120726-signed.zip that I also tried...maybe I had not wiped it correctly when switching over. Also that was before I switched over to team recovery, which seems to wipe better.
Thanks again for the advice.

thanks button bro, and ur welcome :good:

[Q] Google Play Update Problem

hi,
i flashed flyrom v3 and oc kernel two days ago.then i came back to cm 9.1 but when i am updating apps on playstore phone reboots.i've wipe everything and done a clean install but problem is still there.how can i fix that?

did u wipe dalvik cache?

russelldias said:
did u wipe dalvik cache?
Click to expand...
Click to collapse
yes

should have helped then! can u give a logcat?

[Q&A] [ROM] Oxygen-mod ROM | Best battery | Stock

Q&A for [ROM] Oxygen-mod ROM | Best battery | Stock
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Oxygen-mod ROM | Best battery | Stock. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Why do you think this ROM have best battery?

Hey guys! If you have any questions or doubt, feel free to post in the thread here: http://forum.xda-developers.com/showthread.php?t=3109379
I would be glad to help you guys there and not having to manage this Q&A page and discussion page. Thanks for your cooperation

Messages
I've tested the rom it has serious lag and I was wondering why the messenger app isn't working.

dispatcher2412 said:
I've tested the rom it has serious lag and I was wondering why the messenger app isn't working.
Click to expand...
Click to collapse
Have you done a clean flash before flashing the ROM?
Sense 7 messages app is still in the works that's why feedback is required.
Please post your enquiries there: http://forum.xda-developers.com/one...om-oxygen-mod-rom-best-battery-stock-t3109379

Reply
Bobbi lim said:
Have you done a clean flash before flashing the ROM?
Sense 7 messages app is still in the works that's why feedback is required.
Please post your enquiries there: http://forum.xda-developers.com/one...om-oxygen-mod-rom-best-battery-stock-t3109379
Click to expand...
Click to collapse
Yes I did a clean flash. I did factory reset using twrp, wiped dalvik, cache, and data.

dispatcher2412 said:
Yes I did a clean flash. I did factory reset using twrp, wiped dalvik, cache, and data.
Click to expand...
Click to collapse
Which ROM were you previously on?
Try this, wipe cache, dalvik cache, system and data manually in recovery. Flash my ROM. Wipe cache, dalvik cache and data in recovery again than reboot. Leave your phone to settle down for 5mins before setting up

Reply
Bobbi lim said:
Which ROM were you previously on?
Try this, wipe cache, dalvik cache, system and data manually in recovery. Flash my ROM. Wipe cache, dalvik cache and data in recovery again than reboot. Leave your phone to settle down for 5mins before setting up
Click to expand...
Click to collapse
I'll do that and then try to see how it runs.

dispatcher2412 said:
I'll do that and then try to see how it runs.
Click to expand...
Click to collapse
Good luck with it and enjoy the ROM

Reply
Bobbi lim said:
Good luck with it and enjoy the ROM
Click to expand...
Click to collapse
System ui stopped error constantly after install

dispatcher2412 said:
System ui stopped error constantly after install
Click to expand...
Click to collapse
Did you try to flash any mods after flashing the ROM? Xposed?
No one reported issues with the ROM except for you so it might be an error on your side. Could you try to install OxygenOS first, do a full wipe in TWRP, install my Oxygen-mod and see if any issues still pops out for you?

how to install?System ui stopped error constantly after install!I am doing full wipe in TWRP(TWRP 2.8.6.0.5)

Answer
Bobbi lim said:
Did you try to flash any mods after flashing the ROM? Xposed?
No one reported issues with the ROM except for you so it might be an error on your side. Could you try to install OxygenOS first, do a full wipe in TWRP, install my Oxygen-mod and see if any issues still pops out for you?
Click to expand...
Click to collapse
I did all of this and not trying to install xposed. I installed original oxygen then wiped it then installed oxygen mod and then flashed my supersu file. I did that and it didn't work at all kept coming up with same error message system ui crashed.

how to install?System ui stopped error constantly after install!I am doing full wipe in TWRP(TWRP 2.8.6.0.5)

dispatcher2412 said:
I did all of this and not trying to install xposed. I installed original oxygen then wiped it then installed oxygen mod and then flashed my supersu file. I did that and it didn't work at all kept coming up with same error message system ui crashed.
Click to expand...
Click to collapse
sezall said:
how to install?System ui stopped error constantly after install!I am doing full wipe in TWRP(TWRP 2.8.6.0.5)
Click to expand...
Click to collapse
Could your grab me a logcat and specify which ROM were you trying to flash, what's your previous ROM and firmware etc... The more info the better. Telling me only "system.ui FC" is not helping at all as multiple reasons could be the cause of it.
Supersu is included in the ROM already.

Bobbi lim said:
Could your grab me a logcat and specify which ROM were you trying to flash, what's your previous ROM and firmware etc... The more info the better. Telling me only "system.ui FC" is not helping at all as multiple reasons could be the cause of it.
Supersu is included in the ROM already.
Click to expand...
Click to collapse
Same issue here... SystrmUI FCs right after first boot. Can't access settings menu either to activate USB debugging.. So can't grab a logcat :/ Also the sim doesn't get detected.
These are the steps I followed to install ROM -
- Complete wipe (except internal storage)
- installed ROM
- installed oxygen modem
- reboot
- FCs start after setup screen
My guess is it is something new you included in the build.prop which might be causing the issue.. Can u link me to the older version?

can you please tell how to install your ROM . I already have Oxygen Os in My OPO. Thanks

2.0.1
neodestro141 said:
can you please tell how to install your ROM . I already have Oxygen Os in My OPO. Thanks
Click to expand...
Click to collapse
The new version is working much better however occasionally I am getting the htc input has stopped popup.

dispatcher2412 said:
The new version is working much better however occasionally I am getting the htc input has stopped popup.
Click to expand...
Click to collapse
Head over to settings to disable HTC Input. Use CM file manager and head over to system/priv-app and copy out HTC_IME into your internal storage. Delete the app from system/priv-app, reboot and use any file manager to access your internal storage and install the app again

quick settings pull down
Just flashed the rom. Everything is looking good!
Question: will you add the option to disable quick pull down of the quick settingsbar in the future? (or is it there already and did I overlook it?)

zuk z1 battery issue

i flashed rr v5.8.5 on my zuk z1. it was a clean flash. now i am facing battery issues. google play services is using more battery than display and battery is draining very fast and charging very slowly. can anyone help me with this issue ?

rohan0101 said:
i flashed rr v5.8.5 on my zuk z1. it was a clean flash. now i am facing battery issues. google play services is using more battery than display and battery is draining very fast and charging very slowly. can anyone help me with this issue ?
Click to expand...
Click to collapse
Can you link me to the rom you have used ? i think its a bug in the rom

-Hope- said:
Can you link me to the rom you have used ? i think its a bug in the rom
Click to expand...
Click to collapse
i am using resurrection remix os v.5.8.5 based on android v7.1.2.. it was a clean flash so i was not expecting any bugs because there was no problem with v5.8.4. thank you for your help i hope you can help me out

rohan0101 said:
i am using resurrection remix os v.5.8.5 based on android v7.1.2.. it was a clean flash so i was not expecting any bugs because there was no problem with v5.8.4. thank you for your help i hope you can help me out
Click to expand...
Click to collapse
The problem seem to exist as there are some people reporting it,
Try to reflash the rom again
DON'T REBOOT
go back and flash gapps
DON'T REBOOT (some people reported that flashing gapps after first reboot causes issues then you will have to factory reset)
Do a factory reset again without flashing the rom
REBOOT

-Hope- said:
The problem seem to exist as there are some people reporting it,
Try to reflash the rom again
DON'T REBOOT
go back and flash gapps
DON'T REBOOT (some people reported that flashing gapps after first reboot causes issues then you will have to factory reset)
Do a factory reset again without flashing the rom
REBOOT
Click to expand...
Click to collapse
thank you so much for your help i hope this would help. i am new to this so i wanted to ask that if i want to do a factory reset but don't want to clear my internal storage then what all should i wipe in order to perform a factory reset. thanks

rohan0101 said:
thank you so much for your help i hope this would help. i am new to this so i wanted to ask that if i want to do a factory reset but don't want to clear my internal storage then what all should i wipe in order to perform a factory reset. thanks
Click to expand...
Click to collapse
Data
Cache
And Dalvik
there is also an option in twrp to factory reset with a arrow swipe
go to wipe
then you will see a arrow, swipe it. and then try to use your phone and see if there's a battery draining, it seems to be a problem with gapps. since i think you did flash them after the phone's first reboot.

-Hope- said:
Data
Cache
And Dalvik
there is also an option in twrp to factory reset with a arrow swipe
go to wipe
then you will see a arrow, swipe it. and then try to use your phone and see if there's a battery draining, it seems to be a problem with gapps. since i think you did flash them after the phone's first reboot.
Click to expand...
Click to collapse
Thanks a lot it works fine now