Q&A for [ROM] Oxygen-mod ROM | Best battery | Stock
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Oxygen-mod ROM | Best battery | Stock. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Why do you think this ROM have best battery?
Hey guys! If you have any questions or doubt, feel free to post in the thread here: http://forum.xda-developers.com/showthread.php?t=3109379
I would be glad to help you guys there and not having to manage this Q&A page and discussion page. Thanks for your cooperation
Messages
I've tested the rom it has serious lag and I was wondering why the messenger app isn't working.
dispatcher2412 said:
I've tested the rom it has serious lag and I was wondering why the messenger app isn't working.
Click to expand...
Click to collapse
Have you done a clean flash before flashing the ROM?
Sense 7 messages app is still in the works that's why feedback is required.
Please post your enquiries there: http://forum.xda-developers.com/one...om-oxygen-mod-rom-best-battery-stock-t3109379
Reply
Bobbi lim said:
Have you done a clean flash before flashing the ROM?
Sense 7 messages app is still in the works that's why feedback is required.
Please post your enquiries there: http://forum.xda-developers.com/one...om-oxygen-mod-rom-best-battery-stock-t3109379
Click to expand...
Click to collapse
Yes I did a clean flash. I did factory reset using twrp, wiped dalvik, cache, and data.
dispatcher2412 said:
Yes I did a clean flash. I did factory reset using twrp, wiped dalvik, cache, and data.
Click to expand...
Click to collapse
Which ROM were you previously on?
Try this, wipe cache, dalvik cache, system and data manually in recovery. Flash my ROM. Wipe cache, dalvik cache and data in recovery again than reboot. Leave your phone to settle down for 5mins before setting up
Reply
Bobbi lim said:
Which ROM were you previously on?
Try this, wipe cache, dalvik cache, system and data manually in recovery. Flash my ROM. Wipe cache, dalvik cache and data in recovery again than reboot. Leave your phone to settle down for 5mins before setting up
Click to expand...
Click to collapse
I'll do that and then try to see how it runs.
dispatcher2412 said:
I'll do that and then try to see how it runs.
Click to expand...
Click to collapse
Good luck with it and enjoy the ROM
Reply
Bobbi lim said:
Good luck with it and enjoy the ROM
Click to expand...
Click to collapse
System ui stopped error constantly after install
dispatcher2412 said:
System ui stopped error constantly after install
Click to expand...
Click to collapse
Did you try to flash any mods after flashing the ROM? Xposed?
No one reported issues with the ROM except for you so it might be an error on your side. Could you try to install OxygenOS first, do a full wipe in TWRP, install my Oxygen-mod and see if any issues still pops out for you?
how to install?System ui stopped error constantly after install!I am doing full wipe in TWRP(TWRP 2.8.6.0.5)
Answer
Bobbi lim said:
Did you try to flash any mods after flashing the ROM? Xposed?
No one reported issues with the ROM except for you so it might be an error on your side. Could you try to install OxygenOS first, do a full wipe in TWRP, install my Oxygen-mod and see if any issues still pops out for you?
Click to expand...
Click to collapse
I did all of this and not trying to install xposed. I installed original oxygen then wiped it then installed oxygen mod and then flashed my supersu file. I did that and it didn't work at all kept coming up with same error message system ui crashed.
how to install?System ui stopped error constantly after install!I am doing full wipe in TWRP(TWRP 2.8.6.0.5)
dispatcher2412 said:
I did all of this and not trying to install xposed. I installed original oxygen then wiped it then installed oxygen mod and then flashed my supersu file. I did that and it didn't work at all kept coming up with same error message system ui crashed.
Click to expand...
Click to collapse
sezall said:
how to install?System ui stopped error constantly after install!I am doing full wipe in TWRP(TWRP 2.8.6.0.5)
Click to expand...
Click to collapse
Could your grab me a logcat and specify which ROM were you trying to flash, what's your previous ROM and firmware etc... The more info the better. Telling me only "system.ui FC" is not helping at all as multiple reasons could be the cause of it.
Supersu is included in the ROM already.
Bobbi lim said:
Could your grab me a logcat and specify which ROM were you trying to flash, what's your previous ROM and firmware etc... The more info the better. Telling me only "system.ui FC" is not helping at all as multiple reasons could be the cause of it.
Supersu is included in the ROM already.
Click to expand...
Click to collapse
Same issue here... SystrmUI FCs right after first boot. Can't access settings menu either to activate USB debugging.. So can't grab a logcat :/ Also the sim doesn't get detected.
These are the steps I followed to install ROM -
- Complete wipe (except internal storage)
- installed ROM
- installed oxygen modem
- reboot
- FCs start after setup screen
My guess is it is something new you included in the build.prop which might be causing the issue.. Can u link me to the older version?
can you please tell how to install your ROM . I already have Oxygen Os in My OPO. Thanks
2.0.1
neodestro141 said:
can you please tell how to install your ROM . I already have Oxygen Os in My OPO. Thanks
Click to expand...
Click to collapse
The new version is working much better however occasionally I am getting the htc input has stopped popup.
dispatcher2412 said:
The new version is working much better however occasionally I am getting the htc input has stopped popup.
Click to expand...
Click to collapse
Head over to settings to disable HTC Input. Use CM file manager and head over to system/priv-app and copy out HTC_IME into your internal storage. Delete the app from system/priv-app, reboot and use any file manager to access your internal storage and install the app again
quick settings pull down
Just flashed the rom. Everything is looking good!
Question: will you add the option to disable quick pull down of the quick settingsbar in the future? (or is it there already and did I overlook it?)
Related
So here's my question: How do you update your ROM?
Yes I am using the same ROM to update to.
Is it the same method as flashing it in the first place?
e.g.: Go into CWM and flash it?
Or is there a different way of doing it.
If you have an answer please explain it thoroughly.
Hi,
i have last week installed cyanogen 9
to update to the last build of yesterday, i have just installed it from CWM.
i didn't lose any data
heniki said:
Hi,
i have last week installed cyanogen 9
to update to the last build of yesterday, i have just installed it from CWM.
i didn't lose any data
Click to expand...
Click to collapse
So your saying just flash it again with no additional steps?
Just place the updated ROM file in the root of the sdcard and just flash away?
th3controller said:
So your saying just flash it again with no additional steps?
Just place the updated ROM file in the root of the sdcard and just flash away?
Click to expand...
Click to collapse
Yes
I've noticed that flashing ROMs without wiping data causes more problems than it helps you avoid.
Also, see:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/AOKP_Frequently_Asked_Questions
It's always better to do a factory reset before a ROM install to avoid these issues, even when doing a direct upgrade from AOKP -> AOKP.
Click to expand...
Click to collapse
It wouldn't hurt to fix permissions after you flash if you don't wipe your data.
If FB said yes then cheers to that! Thanks FB!
And thanks for the advice guys, I'll make sure to wipe data before updating.
EDIT: Also what are gremlins? Do I need to remove these gremlins before I update my ROM? Or do I just clean gremlins IF I install a different ROM?
If so how do I remove gremlins? (A link provided is enough )
This thread should explain everything:
http://forum.xda-developers.com/showthread.php?t=1500427
I would recommend it only if you have flasheda bunch of stuff and are starting to see problems like poor performance, or extreme battery drain. It's also helpful if you just need to get back to stock+root quickly. Also, if you're having problems, try the other steps in the thread first. When I was having battery issues, the battery trick in the thread fixed it perfectly.
Wodensman said:
This thread should explain everything:
http://forum.xda-developers.com/showthread.php?t=1500427
I would recommend it only if you have flasheda bunch of stuff and are starting to see problems like poor performance, or extreme battery drain. It's also helpful if you just need to get back to stock+root quickly. Also, if you're having problems, try the other steps in the thread first. When I was having battery issues, the battery trick in the thread fixed it perfectly.
Click to expand...
Click to collapse
Thanks for that, I'll surely keep this bookmarked.
FBis251 said:
Yes
Click to expand...
Click to collapse
So by flash do you mean just putting the ROM into the phone and selecting it just like you would when you originally installed the ROM? How do you wipe the original ROM before flashing the update?
Certain ROMs now use the Aroma installer (FBis was responsible for much of the work to make that possible for SGS4G ROMs) which provide more options than a CW Recovery or TWRP "install zip" kind of install. The Aroma installer generally lets you save/restore or wipe.
Both CW Recovery and TWRP have options to wipe one or more of your partitions before you install. They are a little different and which one you have will depend on what you are flashing from.
After flashing EOS nightly v260 on my Xoom (which is performing great) I noticed that in Titanium all the free system rom is gone.
Also when I open Superuser it is requesting for an update of the binary, but that keeps failing.
I have twrp 2.5 running on my xoom.
I cannot ask this direct on the developers thread because of the 10 mails rule.
System room
Albert52 said:
After flashing EOS nightly v260 on my Xoom (which is performing great) I noticed that in Titanium all the free system rom is gone.
Also when I open Superuser it is requesting for an update of the binary, but that keeps failing.
I have twrp 2.5 running on my xoom.
I cannot ask this direct on the developers thread because of the 10 mails rule.
Click to expand...
Click to collapse
DId you install the EOS XOOM only GAAPS? It leaves room in the system.
RedWingsFanEd said:
DId you install the EOS XOOM only GAAPS? It leaves room in the system.
Click to expand...
Click to collapse
Thanks for your quick reaction.
Yes I did use gapps-jb-20130413-EOS-Xoom-only.
I am using SuperSU without any problems. You may want to change to it.
You can try going to recovery, wipe your system, install it again and try flashing the LATEST nightly. Good luck
XxLordxX said:
You can try going to recovery, wipe your system, install it again and try flashing the LATEST nightly. Good luck
Click to expand...
Click to collapse
Thanks for your advice, I try that today and let you know.
Thanks again for your quick responce:good:
Thanks XxLordxX, your suggestion worked.
I have some system rom free now (10MB) and SuperSU works fine.
:good:
Hey there!
I flashed cm10.1.3 from dirty developers but the settings gave me fc when I go to security settings.
So I cannot check the unknown sources option and hence I cannot install apps other than from play store
Also keyboard is not working so I cannot type anything
No one has faced these bugs so thought of asking it here
Any help would be appreciated
Thanks in advance!!
Alcatraz said:
Hey there!
I flashed cm10.1.3 from dirty developers but the settings gave me fc when I go to security settings.
So I cannot check the unknown sources option and hence I cannot install apps other than from play store
Also keyboard is not working so I cannot type anything
No one has faced these bugs so thought of asking it here
Any help would be appreciated
Thanks in advance!!
Click to expand...
Click to collapse
it maybe because of a dirty flash. wipe data, cache and dalvik cache and flash the rom again.
PR0707YP3 said:
it maybe because of a dirty flash. wipe data, cache and dalvik cache and flash the rom again.
Click to expand...
Click to collapse
no
I clean flashed
Hey everyone,
Thank you all for reading this...
Today, I wanted to update my phone from cm-12.1-20150429-NIGHTLY-bacon.zip to cm-12.1-20150502-NIGHTLY-bacon.zip and after optimizing all 199 applications the lock screen appeared and everything seemed fine. However a second later, a pop-up appeared delivering the crash of the google play services. After pressing on "ok" (the only option), the phone switched off and began optimizing the apps again and again, showing the boot sequence in-between. After a while, I tried to install the update again through TWRP and I failed again. Then I tried to restore my backup from the 19th April I had probably made with Nandroid Backup (not exactly sure) and I failed again. Now I have turned off my phone entirely so that it won´t get too hot.
Does anybody know how to fix this issue (preferably without wiping)? And do you think, should I stay with the nightlies or switch to Cyanogen OS 12 (how?)
Best regards from the android newbie,
George (ambach10)
Try reflashing slim's gapps package.
Edit: Link to thread: http://forum.xda-developers.com/oneplus-one/themes-apps/gapps-modified-slim-gapps-calkulin-t3082242
Thanks for helping me. I did, but it just continued to optimize. I also tried to install the newest cm12.1 update "cm-12.1-20150505-NIGHTLY-bacon.zip" by downloading it via a mac (is that a problem?) so that it would work with the newest gapps zip but I couldn´t even download the cm12.1 zip as it turned into a useless folder. Do you, or anyone else, know what to do know? I´m really frustrated that I cannot have access to my phone. I am also ready to wipe it, if necessary.
ambach10 said:
Thanks for helping me. I did, but it just continued to optimize. I also tried to install the newest cm12.1 update "cm-12.1-20150505-NIGHTLY-bacon.zip" by downloading it via a mac (is that a problem?) so that it would work with the newest gapps zip but I couldn´t even download the cm12.1 zip as it turned into a useless folder. Do you, or anyone else, know what to do know? I´m really frustrated that I cannot have access to my phone. I am also ready to wipe it, if necessary.
Click to expand...
Click to collapse
Follow this steps to first turn on your phone https://forums.oneplus.net/threads/guide-how-to-revert-back-to-cm11s-from-oxygen-guide.290605/
It's CM11S.
Easy way to revert back.
ambach10 said:
Thanks for helping me. I did, but it just continued to optimize. I also tried to install the newest cm12.1 update "cm-12.1-20150505-NIGHTLY-bacon.zip" by downloading it via a mac (is that a problem?) so that it would work with the newest gapps zip but I couldn´t even download the cm12.1 zip as it turned into a useless folder. Do you, or anyone else, know what to do know? I´m really frustrated that I cannot have access to my phone. I am also ready to wipe it, if necessary.
Click to expand...
Click to collapse
I've had this issue before. To fix it, I used these gapps, did a full wipe, then flashed everything all over again and it was working without any problems.
Also, I ended up just switching over to COS12 and am still running that. If you want, you can get that here.
ambach10 said:
Thanks for helping me. I did, but it just continued to optimize. I also tried to install the newest cm12.1 update "cm-12.1-20150505-NIGHTLY-bacon.zip" by downloading it via a mac (is that a problem?) so that it would work with the newest gapps zip but I couldn´t even download the cm12.1 zip as it turned into a useless folder. Do you, or anyone else, know what to do know? I´m really frustrated that I cannot have access to my phone. I am also ready to wipe it, if necessary.
Click to expand...
Click to collapse
Also, make sure you are running latest version of TWRP recovery (or whatever recovery you are using)... there are compression incompatibilities with some of the older versions.
Thanks everybody!
Thank you all for helping me out:
@frieked I have twrp v2.8.5.1. Is that ok and if not how can i update that?
@The_Symbiote should i install the apps before the full wipe and is there something not to wipe (USB_OTG)?
@Mr hOaX does it also work for cm12.1 nightlies or only for oxygenos?
ambach10 said:
Thank you all for helping me out:
@frieked I have twrp v2.8.5.1. Is that ok and if not how can i update that?
@The_Symbiote should i install the apps before the full wipe and is there something not to wipe (USB_OTG)?
@Mr hOaX does it also work for cm12.1 nightlies or only for oxygenos?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2766186 Here is the TWRP thread 2.8.6.0 is the latest. You can update using the TWRP Manager app available on the play store.
ambach10 said:
@The_Symbiote should i install the apps before the full wipe and is there something not to wipe (USB_OTG)?
Click to expand...
Click to collapse
I wiped everything other than Internal Storage, flashed the rom, flashed the gapps, and then rebooted and it booted just fine.
ambach10 said:
Thank you all for helping me out:
frieked I have twrp v2.8.5.1. Is that ok and if not how can i update that?
The_Symbiote should i install the apps before the full wipe and is there something not to wipe (USB_OTG)?
Mr hOaX does it also work for cm12.1 nightlies or only for oxygenos?
Click to expand...
Click to collapse
It works for all lollipop based ROMs.
I hope now your device is working fine.
Sorry for replying late.
Hi All,
I am using Samsung S2 GT-I9100 device with CM12.1. Earlier I was using KitKat and recently updated to Lollypop. While I was on KitKat got an update for CM12.1 Nightly and updated my phone to Lollypop. After that all my Gapps have stopped working and even I have tried to flash them through recently available Gapps packages, none of the Gapps are working.
Please suggest the fix.
Thanks!!
sbehera23 said:
Hi All,
I am using Samsung S2 GT-I9100 device with CM12.1. Earlier I was using KitKat and recently updated to Lollypop. While I was on KitKat got an update for CM12.1 Nightly and updated my phone to Lollypop. After that all my Gapps have stopped working and even I have tried to flash them through recently available Gapps packages, none of the Gapps are working.
Please suggest the fix.
Thanks!!
Click to expand...
Click to collapse
get the update from cm site, and a lollipop gapps. wipe cache, dalvic cache, and system only in advanced menu, then flash rom and gapps.
no data will be lost. make a backup first, in case there is a problem.
Thanks for your input. Just querying, if i will flash only the gapps will it work as my phone is already have lollipop os. Just trying to avoid to flash lollipop again.
Please let me know your thoughts.
sbehera23 said:
Thanks for your input. Just querying, if i will flash only the gapps will it work as my phone is already have lollipop os. Just trying to avoid to flash lollipop again.
Please let me know your thoughts.
Click to expand...
Click to collapse
really nothing will change by doing it the way i said, unless you made a bunch of system mods.
you can try it your way, it may work.
my way just gives you a clean system, so there is no chance of conflict with the old gapps that dont work properly.
bweN diorD said:
really nothing will change by doing it the way i said, unless you made a bunch of system mods.
you can try it your way, it may work.
my way just gives you a clean system, so there is no chance of conflict with the old gapps that dont work properly.
Click to expand...
Click to collapse
Can i flash using default cyanogen recovery? I have tried installing CWM but it is going by default to Cyanogen Recovery. Could you please help in providing the steps for easy reference if possible.
Thanks!!
sbehera23 said:
Can i flash using default cyanogen recovery? I have tried installing CWM but it is going by default to Cyanogen Recovery. Could you please help in providing the steps for easy reference if possible.
Thanks!!
Click to expand...
Click to collapse
i wasnt aware cyanogen had their own recovery. not knowing anything about it, i cant speculate if you can use it to flash with.
the procedure i described in post 2 are the proper steps, but if you dont have those options in the cyan recovery, im not sure what to tell you. sorry