I ordered one of these off of Amazon Friday when I got my Nexus
goo.gl/qpBr
I ordered through DayDeals. I received the two halves that snap together, but no belt clip
I want to note that the sides not shown in the picture are white, and it makes viewing the sides inconsistent and kinda ugly. It fits like a very tight glove except for the top left corner. It doesn't snap down all the way.
The case is very light, and in my opinion flimsy. I don't care too much about protecting it from light scratches, as I've ordered a full-body skin from Zagg to do that. I want to protect it from accidental drops, and I don't think this case can do that for me.
It flexes easily and unnecessarily.
I do like it shape, if it were to snap down completely. It leaves the entire screen open for my fingers to fing, and all controls are easily accessible, no ports or holes are covered up.
I also noticed that having a case prevents my hand from touching the screen and screwing up the points at which the screen recognizes input.
However this is overshadowed by the fact that the case provides less friction or grip than the phone without the case. I found the phone would slip slowly out of my palms while trying to type in horizontal mode.
Pros:
Nicely shaped
Doesn't cover holes or controls
Very light and unobtrusive
Improves accuracy with touch screen
Cons:
Did not include belt clip
Flimsy
Slippery
Does not fully fit over the phone
Unlikely to protect the phone in case of accidental drops
Overall I would give this product 3 points on a scale of 10. For less than $10 I didn't really expect much. I'd much prefer a Body Glove hard shell case similar to the one I had with my MT3G.
I got the same case and have the exact same issues. Already ordered a TPU case to replace it.
I have the same case as well, and would have to say that I agree with all your points... one thing (maybe the only thing) I like about the case is that it didn't add a whole lot of bulk, and still fits in my Case Logic holster which already had a snug fit for the phone.
I got two of these off ebay and both fit the phone perfectly. I know what you're talking about with regards to fit though. I ran into the same problem with similar cases for the G1 several times.
Will the HP Touchpad with a full body invisibleshield fit in the case that HP is selling? I'm kind of paranoid about scratches, but I want the nice sophistication of the case as well.
Yes, I have a TP with InvisibleShield, and it comes to just within about 1-2mm from the edge of the glass. The HP "snap on" case does not touch the glass or the screen protector.
My only gripe with HPs case is the front flap doesn't have anything to keep it closed, and due to the way you must position the TP on the Touchstone dock to charge, the flap falls open. You have to set it on the left hand edge, the hinge side, or the bottom edge with the button, which causes the flap to sag and get bent out of shape. I'll probably try a small velco button attached to the screen, but of course that would ruin the screen protector if it got in the way and annoyed me.
Given the great work that HP put into this, with a lot of great ideas around usability, and appearance, it is really a shame that they didn't place a couple of small magnets inside the corners of the TP and the case flap. Even the packaging for the TP, the case, the dock, all designed well (IMHO) with consistency and probably to help you feel better about spending (what was previously) a lot of money on the whole kit.
I'm not just talking about the screen protector. I'm talking about the full body invisibleshield for the HP Touchpad. Sorry if I was not clear.
RcklssNdngrmnt said:
Yes, I have a TP with InvisibleShield, and it comes to just within about 1-2mm from the edge of the glass. The HP "snap on" case does not touch the glass or the screen protector.
My only gripe with HPs case is the front flap doesn't have anything to keep it closed, and due to the way you must position the TP on the Touchstone dock to charge, the flap falls open. You have to set it on the left hand edge, the hinge side, or the bottom edge with the button, which causes the flap to sag and get bent out of shape. I'll probably try a small velco button attached to the screen, but of course that would ruin the screen protector if it got in the way and annoyed me.
Given the great work that HP put into this, with a lot of great ideas around usability, and appearance, it is really a shame that they didn't place a couple of small magnets inside the corners of the TP and the case flap. Even the packaging for the TP, the case, the dock, all designed well (IMHO) with consistency and probably to help you feel better about spending (what was previously) a lot of money on the whole kit.
Click to expand...
Click to collapse
Fold the flap behind the TouchPad so it is between the back and the Touchstone. That's what I do!
Anyways, there should be enough room in the case to allow for the back shield. I would definitely be careful when taking it off, though!
I have a Armor Suit carbon fiber shield on my TP and it does fit in the official HP case. It is a tight squeeze, and I would not recommend taking it in and out of the case very often.
Hello all..
So, after I broke the screen on my Desire(the corner of the screen was bent-shattered by a jeans-pocket), I felt it was time for some sort of cover. I browsed through many, looking for a case that would protect the handsets backside as well as being tall enough to take the hit it the phone fell face-down.
I ended up getting the Case-Mate Tough case, from MyTrendyPhone. This order had my repair supplies (New screen and some screwdrivers) as well and they came within 3 days after ordering.
And I have to say, that I'm not disappointed.
The case is quite expensive for what it is, but it does it's job extremely well.
First goes on the silicone cover, followed by the hard plastic cover. The plastic part snaps into place easily, when alinged with the volume-buttons.
It's also tall enough on the front to take a hit when dropped face down, around a good 3-5mm from the glass.
The case has cutouts for the audio jack, microUSB and microphone. The volume and power buttons have their own places in the silicone part.
My only gripe with the case is that both ends of the phone are not covered by the hard plastic, and being only silicone there, when pulling out of a tighter pocket, they might bend, or even possibly tear the silicone apart.
I'd give this case 4.5/5, because of the not-complete plastic covering, and the price, but it's still an extremely protective case, doing it's job well.
Like the package says, "Think Rambo, only pocket sized."
IMHO
I ordered a Case-Mate Tough two weeks ago but I was disapointed because the the holes for the buttons don't fit exactly. After a day I returned the case and ordered the Otterbox Commuter which arrived yesterday and fits perfect.
What do you mean with the "holes for the buttons"? There are no holes for any buttons on this case..
I mean the holes in the hardcover part.
Ahh.. Now I understand. You might have just got a bad one because mine align perfectly.
Maybe, just want to say that.
Hello there,
do you guys know if the type cover scratches the surface display? I do know that mine is just a few weeks old and I was good to it, meaning it didn*t fall down or anything like that. Still, I got some scratches in it. I now think that this could be because of the type cover. Do you guys have any experience with that. And: Are there better covers out there, maybe even thinner? I don't need the keys all the time anyway.
The type cover,you mean the keyboard thingy?it never did scratch my surface
Sent from my HTC S510b using Tapatalk 2
2 covers available at the moment. The type cover and the touch cover. They are being replaced with the type 2 and touch 2 which are slightly slimmer, backlit and in the case of the touch 2 have more sensors so should be more accurate plus support multitouch gestures on the trackpad. There is also the power cover which seems to be a thicker type cover with a battery in it for charging a surface pro, surface pro 2 or surface 2 but *not* the surface RT (where it would just serve as a thicker type cover).
None of those cases should scratch the display. They are plastic, the screen is gorilla glass. Gorilla glass can only really be damaged by very sharp edges, sand/other grit and a few minerals. In your case most likely grit damaged it. Plastic could not scratch it.
It's a hard surface that can grind dust into screen when it's closed up. That goes for anything really, the risk is there. I have a few tiny dot marks on screen after using type cover for a few months and keeping everything clean and in a sleeve when not used. No big damage that I can even notice with screen on, though.
johnchad14 said:
It's a hard surface that can grind dust into screen when it's closed up. That goes for anything really, the risk is there. I have a few tiny dot marks on screen after using type cover for a few months and keeping everything clean and in a sleeve when not used. No big damage that I can even notice with screen on, though.
Click to expand...
Click to collapse
Mine is pretty noticable. I got a new surface RT without scratches and I'm kinda afraid now to use the type cover again...
Sephi said:
Mine is pretty noticable. I got a new surface RT without scratches and I'm kinda afraid now to use the type cover again...
Click to expand...
Click to collapse
Is it in an environment with alot of dirt and grit? It wouldnt just have to be the cover, it lying face down, going into a padded sleeve or the touch cover could also rub dirt over the front of your tablet.
SixSixSevenSeven said:
Is it in an environment with alot of dirt and grit? It wouldnt just have to be the cover, it lying face down, going into a padded sleeve or the touch cover could also rub dirt over the front of your tablet.
Click to expand...
Click to collapse
No, it's really not. For example, my Galaxy Note, and I really really wasn't good to it and it fell down quite a few times or were together with my keys in my pocket - does not have any noticable scratches. The Surface however has quite some big, deep ones which are clearly noticable even when the screen is on. And I don't know there they are supposed to come from other than the type cover.
OK, the type cover is DEFINITLY scratching the display. I got a few more scratches today after I took it with me in my bag and used the type cover as protection. The scratches all look kinda similiar and they are all in the upper region, I guess there is more contraction there. Horrible, I would NOT use the type cover as an actual display protection.
The strange thing is the scratches are all in the area without keys, the area where the touchpad is but to the sides, so it's no rough surface (no pun intended). I don't know where the scratches are coming from en masse but they are there, it's horrible. I know ordered this bag here: http://www.amazon.de/dp/B00D1HQPQC/ref=pe_386171_38075861_TE_item
Any thoughts?
Thats an absolute physical impossibility.
All materials have a hardness (or several hardnesses dependant on the method of measurement but the general principle applies the same).
In order for material A to scratch material B, material A must be harder than material B.
Plastic is not as hard as gorilla glass, nor is it rough edged (a very sharp point of a softer material if forced hard enough will scratch another harder material). Expecting a flat piece of plastic to scratch the glass on the surface is like throwing a ball in the air and expecting it to fall, doesn't happen.
If there is something in between then it can happen. Sand for example, it is harder than gorilla glass, its also a small particle that tends to stick to your screen so when you shut the cover on it the cover will be forcing the sand into the screen, due to the nature of the hinge on the surface the cover can wobble forwards and back a few mm rubbing the sand grain over a small area. Other bits of dirt can do it again, small bits of mud or whatever.
Plastic at most could only transfer the coating of the plastic to the glass which would wipe off, and that I highly doubt would happen.
As for more contraction, that would entirely be down to how you store the device. The touch cover only attaches with a simple flap, its free to drop open or closed at any time, if its stored with slightly more force in one corner then its not going to apply the force terribly equally across the device.
But where is it coming from? Scratches are everywhere and by no chance I got sand in my bag or anywhere else. It's been months since the last time I saw some sand. Living in the middle of germany.
It doesnt necessarily have to be beach sand. Concrete dust, mud, construction sand. All could do it (mud less so). Sand has a tendancy to hide in small spots in bags if there is any (or transfer from other items). Anything could be the cause, i find it highly unlikely to be the cover itself.
One thing you could try, can you find a sheet of soft fabric or foam or something that you could cut to size and wedge between the cover and screen. Might reduce the impact of whatever is going on. Can keep the sheet loose in your bag, stick it in when closing the cover. Or simply fold the keyboard over the back of the unit and put it in a netbook sleeve but that would be leaving the glass exposed to knocks etc
Well, I really looked into my bag but I can't find any sand or anything like that. Dust, obviously, is everywhere all the time. Like I stated before, y my GNOte is basically scratch free after 1,5 years of abusive use. I don't get it.
Sephi said:
Well, I really looked into my bag but I can't find any sand or anything like that. Dust, obviously, is everywhere all the time. Like I stated before, y my GNOte is basically scratch free after 1,5 years of abusive use. I don't get it.
Click to expand...
Click to collapse
YES, the type cover WILL scratch the display. I have heard it from other people and I have it myself.
NO, it is not the material, it is any grit that gets trapped in between them. Get a tiny grain of sand in there, you are in trouble.
YES, I use a screen protector now and it is getting trashed.
NOW I carry a large micro fiber cloth in my carrying case. Before putting the Surface away, I wipe off the display and keyboard. That has reduce the amount of damage. I'll still need to replace the screen protector often, but I'm OK with that compared to more glass damage.
I hate screen protectors with a passion. I will just stop using type cover then...
after reading this thread it is very bad news, this is a poor design by microsoft if they did not consider this. no laptop i have ever had scratches the display but many cheaper laptops ive had leave dust imprint around the keys and sometimes the keys even pressed the screen. now that the screens are so hard like glass obviously if little particles get trapped and rub it will scratch it. too bad as this was going to be my first gorilla glass product. i hate scratches so will ignore the type cover. even the touch cover will have the same issue if it is completely flush and pressed against the display.
what a damn shame
Indeed it does. I bought mine on Sunday night. Monday afternoon I noticed a scratch/pit on my screen when I was cleaning it off. I looked at the type cover, and there was a piece of grit/sand stuck in the soft, flat part where my right palm is not supposed to rest.
:crying:
willusdun said:
after reading this thread it is very bad news, this is a poor design by microsoft if they did not consider this. no laptop i have ever had scratches the display but many cheaper laptops ive had leave dust imprint around the keys and sometimes the keys even pressed the screen. now that the screens are so hard like glass obviously if little particles get trapped and rub it will scratch it. too bad as this was going to be my first gorilla glass product. i hate scratches so will ignore the type cover. even the touch cover will have the same issue if it is completely flush and pressed against the display.
what a damn shame
Click to expand...
Click to collapse
Microsoft likely did consider it, and decided that having a slimmer overall product would generate more revenue.
Some laptops dont have this issue because they have "spacers" around the screen that maintain a small gap between the keys and the screen when closed.
My Thinkpad has markings on its screen from its own keyboard, even though theres a massive 2-3mm gap between the keys and screen when closed. This is because the screen can flex a bit and likely got smushed into my keys (I'm pretty rough with my Thinkpad).
There isnt much you can do about it, almost every product has this issue.
My HTC One sits in my pocket with nothing else in it, and it has markings on it. I haven't been anywhere near a beach since I got the phone.
So like someone else said, all sorts of particles can scratch your screen.
Even Macbooks have this issue, its the reason why people sell specially cut microfiber cloths that are meant to be placed between screen and keyboard when Macbook is closed.
Either get a screen protector, deal with it, or wait a few decades until they make glass strong enough to resist everything.
My HP sleekbook has an imprint from the keys on the screen. I had my laptop bag on the passenger seat of my car, was cut up really badly by someone at 50mph, immediately wished that my car had decent ABS which it doesnt as it made a nice tyre squeal. Laptop bag slammed to floor, opened it up, laptop 100% intact, just has key imprints on the screen which are actually rubbing off (does literally seem to be dirt rather than physical damage).
I have my Surface RT with touch cover. I have been using it for a year. I never put any screen protector and I have scratches on screen. I carry my surface in my bag pretty much every week day. I don't find the scratches affecting any usability or affecting the quality of display. When the screen lights up while using, you are not going to see those scratches that easy. Only when screen off and at certain angle you will be able to see some. It's just a device for use for couple years, relax and enjoy it. Putting screen protector will protect the screen from scratches, but degrade your display color, viewing angle, reflection, brigtness, touch feel, etc.