I ordered one of these off of Amazon Friday when I got my Nexus
goo.gl/qpBr
I ordered through DayDeals. I received the two halves that snap together, but no belt clip
I want to note that the sides not shown in the picture are white, and it makes viewing the sides inconsistent and kinda ugly. It fits like a very tight glove except for the top left corner. It doesn't snap down all the way.
The case is very light, and in my opinion flimsy. I don't care too much about protecting it from light scratches, as I've ordered a full-body skin from Zagg to do that. I want to protect it from accidental drops, and I don't think this case can do that for me.
It flexes easily and unnecessarily.
I do like it shape, if it were to snap down completely. It leaves the entire screen open for my fingers to fing, and all controls are easily accessible, no ports or holes are covered up.
I also noticed that having a case prevents my hand from touching the screen and screwing up the points at which the screen recognizes input.
However this is overshadowed by the fact that the case provides less friction or grip than the phone without the case. I found the phone would slip slowly out of my palms while trying to type in horizontal mode.
Pros:
Nicely shaped
Doesn't cover holes or controls
Very light and unobtrusive
Improves accuracy with touch screen
Cons:
Did not include belt clip
Flimsy
Slippery
Does not fully fit over the phone
Unlikely to protect the phone in case of accidental drops
Overall I would give this product 3 points on a scale of 10. For less than $10 I didn't really expect much. I'd much prefer a Body Glove hard shell case similar to the one I had with my MT3G.
I got the same case and have the exact same issues. Already ordered a TPU case to replace it.
I have the same case as well, and would have to say that I agree with all your points... one thing (maybe the only thing) I like about the case is that it didn't add a whole lot of bulk, and still fits in my Case Logic holster which already had a snug fit for the phone.
I got two of these off ebay and both fit the phone perfectly. I know what you're talking about with regards to fit though. I ran into the same problem with similar cases for the G1 several times.
I purchased the Body Glove hard case (matrix) and am quite pleased with it. While it isn't perfect, I can't see there being much better for this phone.
Aesthetics.
I think it looks pretty slick. The back is pretty flashy and it looks pretty good on the phone. It doesn't cover much of the face itself, which I think is good since I have a screen protector and it doesn't inhibit the track pad.
Protection.
I haven't dropped it yet, but it does sport a protective felt-like pad on the back side so it won't scar the metal back. The front does provide enough protection that if it landed on its face, I think it will provide enough gap between the concrete and the screen - about as much gap as my iPhone's case which has survived me 2 years and many drops on the face. It's a functional, protective case, we can leave it at that.
Use.
It snapped onto the phone surprisingly well and doesn't inhibit any functionality. It slides out of the pocket very easily (just as well as a naked phone, probably better than a gel case) and only adds a little extra bulk...overall it is only slightly larger than my iPhone 3g, but that is just the added keyboard. The weight added is negligible.
Issue.
My one complaint is that the case is not as rigid as hard cases I am used to. The part around the screen is flexible, and as you can see in some photos I attached, it really does bow out when given the right amount of pressure.
Overall.
Awesome case: looks nice, provides enough protection (IMO), and doesn't interfere with other photo functions.
Also, I have added the T-Mobile anti-smear/anti-glare screen protector, which works great:
The feel is good - right now it might be a little to clean and my fingers don't swipe to great - i'll follow up on this as I use the phone more.
It covers MOST of the screen..you can see in my first photo that there is only a little piece of screen (the bottom of the buttons) that is uncovered.
It hides finger prints and smudges like a champion and doesn't take away from the screen clarity IMO - but I've always used a anti-glare screen protector, and i don't notice any sort of grainy-ness.
Doesn't take away from the responsiveness of the buttons on the bottom.
My phone is yet to be activated (company line), but overall just playing around on WiFi for a few hours, I am very satisfied and would recommend this combination.
I purchased the body glove case, and I do not like it at all.
It seems a lot thinner and cheap compared to other bodyglove cases.
At 29.99 in the T-mobile store it is a rip-off. I am going to buy the oem one...it seems sturdier at half the price.
Just saw this body glove case with kickstand for $11
http://www.amazon.com/Body-Gloves-Glove-Snap-T-Mobile/dp/B0042AH37M/ref=pd_sim_cps_3
Anybody tried this before? Good deal?
After getting an Otterbox Defender case for my iPod Touch and liking the level of protection it gave, the minute I bought my Atrix 2 I hoped they made one for it. Luckily they have a couple cases for it, the Commuter and the Defender. After careful consideration I went with the Commuter for a few reasons, less bulky, I don't use hip holsters and I thought it would be like the Defender for my iPod and have a built in screen protector....Since the screen on the A2 is beveled on the edges I didn't think that would work out too good. I bought my case on Amazon from a seller named "Alwayz on Sale" for $24.99 + $4.48 shipping. My experience with this seller was as expected, quick order processing, quick shipping, product arrived as advertised, even a couple days early too. Just received it this afternoon and installed it this evening when I got home from work, here's my take on it.
The case consists of two parts, a silicone sleeve and a polycarbonate shell. Also included are a self adhesive screen protector, a screen cleaning cloth and a "squeegee" card to help push the air bubbles out from under the protector. The first thing I did was mocked up the screen protector to see how it fit. This is a major fail by Otterbox! The protector does not cover the whole screen, it just covers up to the beveled edge of it. Not only that but at the top where the cutout is for the speaker and camera is there are not separate cutouts for each, there is just one large notch type cutout. And since the camera is lower than the speaker, the cutout goes down far enough to clear the camera and then straight over, then up the right side of the speaker. The end result is some screen real estate not protected by the cover directly under the ear speaker. In the grand scheme of things this is just a tiny part of the screen, but it's a detail that should have been given better treatment. I imagine it would be difficult to produce a self adhesive screen protector to fit like a glove over the A2's beveled screen, I get it, but for those looking for full screen protection this is not the answer.
I was let down with the screen protector but still had high expectations for the case itself and it didn't disappoint. The silicone sleeve feels quality, is relatively thick and seems like it will absorb much of the shock and jarring from falls and what not. It fits nicely on the phone, it's a snug fit like you'd expect. Then came time to install the polycarbonate shell....being the impatient mofo I am I coudn't be bothered to look for instructions on the best way to do this. The shell encapsulates the sleeve/phone so it's not just a slide it into place and move on type of deal. The way I did it was slid the phone with the sleeve installed top first into the shell, then pressed the right side of the phone down into the shell taking care not to put too much pressure or force on the buttons as it slid into place. Lastly I grabbed the left side of the shell and kind of bent it backward, if that makes sense, and pushed the phone down into place and let the shell go so it "grabbed" the phone and held it in place like it should. I then checked the port covers to ensure they were lined up right and opened and closed properly, then tested the buttons to make sure they were lined up right as well. No problems here.
With the case fully installed I inspected it's build quality and fitment and was not let down. No sharp edges anywhere, no molding overhang, the mic opening at the top and bottom of the phone were aligned perfectly, the beveled edges surrounding the rear camera and speaker was a nice touch, ensuring no interference with either. Obviously, the case did add some bulk and weight to the phone but that was to be expected. However it's not an exaggerated bulk, it's just enough to put your mind at ease knowing that if you were to drop your phone, it's not likely to get damaged. The silicone sleeve is borders the face of the phone, allowing you to set it face down without worry of it resting on the screen. The raised buttons are easy to press and make for especially easy locking/unlocking of the phone for people with fat fingers like me. The only thing I don't like, aside from the screen protector, is the lack of silicone in strategic spots on the shell to ensure improved grip. There is none. The shell is just that, a plastic shell, so it's quite slippery to hold. There is so much room on both sides of the phone that they easily could have cut out a large opening in the shell on both sides and allowed the silicone shell to fit in said openings giving much improved grip. That's about the only thing I could see that could be improved with this case. And the screen protector. There is a good thing about the plastic shell though, it should allow easy entry and removal from pockets. That's one that I like about it over the Defender case for my iPod, which is housed in a poly shell with the silicone sleeve wrapped over the shell. And since I keep my phone in my pocket, should work well for me, as long as I don't drop it.
Luckily I had some experience with Otterbox before so when I placed this order I ordered an Xtreme Guard screen protector for it as well. This combo results in 99.9% frontal protection of the phone. The only part not protected is a tiny area above the camera as the cutout for it is a U shaped one, not a circle. I highly suggest the same skin type protector if you go with this case so you get a complete, form fitting screen protection. Overall I give this case 4 out of 5 stars, with a better screen protector and improved grip like I mentioned above, it would easily get 5.
Great write up. I have a speck case which cover the beveled edge nicely just waiting for a decent screen protector.
Sent from my MB865 using xda premium
cuhrazy said:
Great write up. I have a speck case which cover the beveled edge nicely just waiting for a decent screen protector.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Thank you. The Otterbox covers the beveled edge nicely too.
sent from my Motorola Atrix 2 via Tapatalk
Not sure what the issue is but I seem to have developed a case of the butter fingers cause I've dropped my phone 3 times now....not a scratch/dent/scuff on it
What about some pics?
nahuelarg86 said:
What about some pics?
Click to expand...
Click to collapse
That would require that I go get some new batteries for my DSLR....maybe I'll pick some up while out shopping this weekend.
Here you go!
Got this case a few months back from amazon. So far i've had a few falls and it's protected the phone very well. It feels solid and fits like a glove, i'd recommend this case to anyone with an Atrix 2 (save those with an oversized 4000mAh batter).:good:
I've got the Defender and it's awesome !! I rate it 5 stars!
Sent from my MB865 using xda premium
I've tried the following:
Belkin Verve Folio Stand.
http://www.belkin.com/IWCatProductPage.process?Product_Id=593390
Nice, quality leather case. Thick when folded 180 degrees. This could be a pro or con. It gives a nice thick grip when reading in portrait mode. Some will like that, some won't. Speakers are not muted when used as a stand. Edges stick out which probably add protection in the event of a fall, but also make the power and volume buttons difficult to operate. Not hugely so, but annoyingly so.
Belkin Slim Folio Stand.
http://www.belkin.com/IWCatProductPage.process?Product_Id=593409
Artificial material. High quality. Very thin. Very much like the Apple case my wife has on her Ipad. Speakers are not muted when used as a stand. If you want a very thin book style case, this is almost perfect. One Con: When opened 180 degrees, as in reading a book in one hand, the cover flops down in the middle. Its because the front cover folds up into a small triangular support. Stupid, because it works great as a stand using the same style as the Verve above. Having two types of stand styles, both landscape, is useless. If you like to hold the tab with the cover rotated 180 degrees you may find this annoying.
Plastic Skin
http://www.ebay.com/itm/Case-for-Ga...Accessories&hash=item45ffdeff77#ht_2358wt_814
Fits perfectly. It covers the sim card port, but so what? I leave this on 24/7. Needless to say, I really like it.
Case
http://www.ebay.com/itm/RIM-BlackBe...ultDomain_0&hash=item43a6ba953b#ht_5150wt_952
It fits perfect. The Model is the A7s. Ignore the models specifically labeled "8.9", they're too big. The A7s fits perfect with no stretching. It's a kind of pleather. However, it has a memory foam layer that makes it very cushy. It zips all the way open on three sides. When the plastic cover listed above is on, it still fits great in the memory foam case.
Vikuti Screen Protector
http://www.protectionfilms24.com/ar...-adqc27-samsung-galaxy-tab-8,9-lte-59075.html
Pros: Impossible to tell it's on. Just as slick to the touch as the glass, crystal clear. Fit's perfect. Cons: A bit harder to clean fingerprint smudges off than the straight glass. It doesn't seem to improve or degrade how smudges show, just a bit harder to clean.
eBay USB Adapter
http://www.ebay.com/itm/28076991331...X:IT&_trksid=p3984.m1439.l2649#ht_4940wt_1048
Works great, cheap.
ebay Screen protector
http://www.ebay.com/itm/26089903615...NX:IT&_trksid=p3984.m1439.l2649#ht_3340wt_989
Outside edges fit perfectly. Camera hole in wrong place. Reduces reflections, but there is a "grainy" look to it. The graininess is annoying enough that I did not leave it on.
I hope this helps out anybody looking at accessories...
Hello there,
do you guys know if the type cover scratches the surface display? I do know that mine is just a few weeks old and I was good to it, meaning it didn*t fall down or anything like that. Still, I got some scratches in it. I now think that this could be because of the type cover. Do you guys have any experience with that. And: Are there better covers out there, maybe even thinner? I don't need the keys all the time anyway.
The type cover,you mean the keyboard thingy?it never did scratch my surface
Sent from my HTC S510b using Tapatalk 2
2 covers available at the moment. The type cover and the touch cover. They are being replaced with the type 2 and touch 2 which are slightly slimmer, backlit and in the case of the touch 2 have more sensors so should be more accurate plus support multitouch gestures on the trackpad. There is also the power cover which seems to be a thicker type cover with a battery in it for charging a surface pro, surface pro 2 or surface 2 but *not* the surface RT (where it would just serve as a thicker type cover).
None of those cases should scratch the display. They are plastic, the screen is gorilla glass. Gorilla glass can only really be damaged by very sharp edges, sand/other grit and a few minerals. In your case most likely grit damaged it. Plastic could not scratch it.
It's a hard surface that can grind dust into screen when it's closed up. That goes for anything really, the risk is there. I have a few tiny dot marks on screen after using type cover for a few months and keeping everything clean and in a sleeve when not used. No big damage that I can even notice with screen on, though.
johnchad14 said:
It's a hard surface that can grind dust into screen when it's closed up. That goes for anything really, the risk is there. I have a few tiny dot marks on screen after using type cover for a few months and keeping everything clean and in a sleeve when not used. No big damage that I can even notice with screen on, though.
Click to expand...
Click to collapse
Mine is pretty noticable. I got a new surface RT without scratches and I'm kinda afraid now to use the type cover again...
Sephi said:
Mine is pretty noticable. I got a new surface RT without scratches and I'm kinda afraid now to use the type cover again...
Click to expand...
Click to collapse
Is it in an environment with alot of dirt and grit? It wouldnt just have to be the cover, it lying face down, going into a padded sleeve or the touch cover could also rub dirt over the front of your tablet.
SixSixSevenSeven said:
Is it in an environment with alot of dirt and grit? It wouldnt just have to be the cover, it lying face down, going into a padded sleeve or the touch cover could also rub dirt over the front of your tablet.
Click to expand...
Click to collapse
No, it's really not. For example, my Galaxy Note, and I really really wasn't good to it and it fell down quite a few times or were together with my keys in my pocket - does not have any noticable scratches. The Surface however has quite some big, deep ones which are clearly noticable even when the screen is on. And I don't know there they are supposed to come from other than the type cover.
OK, the type cover is DEFINITLY scratching the display. I got a few more scratches today after I took it with me in my bag and used the type cover as protection. The scratches all look kinda similiar and they are all in the upper region, I guess there is more contraction there. Horrible, I would NOT use the type cover as an actual display protection.
The strange thing is the scratches are all in the area without keys, the area where the touchpad is but to the sides, so it's no rough surface (no pun intended). I don't know where the scratches are coming from en masse but they are there, it's horrible. I know ordered this bag here: http://www.amazon.de/dp/B00D1HQPQC/ref=pe_386171_38075861_TE_item
Any thoughts?
Thats an absolute physical impossibility.
All materials have a hardness (or several hardnesses dependant on the method of measurement but the general principle applies the same).
In order for material A to scratch material B, material A must be harder than material B.
Plastic is not as hard as gorilla glass, nor is it rough edged (a very sharp point of a softer material if forced hard enough will scratch another harder material). Expecting a flat piece of plastic to scratch the glass on the surface is like throwing a ball in the air and expecting it to fall, doesn't happen.
If there is something in between then it can happen. Sand for example, it is harder than gorilla glass, its also a small particle that tends to stick to your screen so when you shut the cover on it the cover will be forcing the sand into the screen, due to the nature of the hinge on the surface the cover can wobble forwards and back a few mm rubbing the sand grain over a small area. Other bits of dirt can do it again, small bits of mud or whatever.
Plastic at most could only transfer the coating of the plastic to the glass which would wipe off, and that I highly doubt would happen.
As for more contraction, that would entirely be down to how you store the device. The touch cover only attaches with a simple flap, its free to drop open or closed at any time, if its stored with slightly more force in one corner then its not going to apply the force terribly equally across the device.
But where is it coming from? Scratches are everywhere and by no chance I got sand in my bag or anywhere else. It's been months since the last time I saw some sand. Living in the middle of germany.
It doesnt necessarily have to be beach sand. Concrete dust, mud, construction sand. All could do it (mud less so). Sand has a tendancy to hide in small spots in bags if there is any (or transfer from other items). Anything could be the cause, i find it highly unlikely to be the cover itself.
One thing you could try, can you find a sheet of soft fabric or foam or something that you could cut to size and wedge between the cover and screen. Might reduce the impact of whatever is going on. Can keep the sheet loose in your bag, stick it in when closing the cover. Or simply fold the keyboard over the back of the unit and put it in a netbook sleeve but that would be leaving the glass exposed to knocks etc
Well, I really looked into my bag but I can't find any sand or anything like that. Dust, obviously, is everywhere all the time. Like I stated before, y my GNOte is basically scratch free after 1,5 years of abusive use. I don't get it.
Sephi said:
Well, I really looked into my bag but I can't find any sand or anything like that. Dust, obviously, is everywhere all the time. Like I stated before, y my GNOte is basically scratch free after 1,5 years of abusive use. I don't get it.
Click to expand...
Click to collapse
YES, the type cover WILL scratch the display. I have heard it from other people and I have it myself.
NO, it is not the material, it is any grit that gets trapped in between them. Get a tiny grain of sand in there, you are in trouble.
YES, I use a screen protector now and it is getting trashed.
NOW I carry a large micro fiber cloth in my carrying case. Before putting the Surface away, I wipe off the display and keyboard. That has reduce the amount of damage. I'll still need to replace the screen protector often, but I'm OK with that compared to more glass damage.
I hate screen protectors with a passion. I will just stop using type cover then...
after reading this thread it is very bad news, this is a poor design by microsoft if they did not consider this. no laptop i have ever had scratches the display but many cheaper laptops ive had leave dust imprint around the keys and sometimes the keys even pressed the screen. now that the screens are so hard like glass obviously if little particles get trapped and rub it will scratch it. too bad as this was going to be my first gorilla glass product. i hate scratches so will ignore the type cover. even the touch cover will have the same issue if it is completely flush and pressed against the display.
what a damn shame
Indeed it does. I bought mine on Sunday night. Monday afternoon I noticed a scratch/pit on my screen when I was cleaning it off. I looked at the type cover, and there was a piece of grit/sand stuck in the soft, flat part where my right palm is not supposed to rest.
:crying:
willusdun said:
after reading this thread it is very bad news, this is a poor design by microsoft if they did not consider this. no laptop i have ever had scratches the display but many cheaper laptops ive had leave dust imprint around the keys and sometimes the keys even pressed the screen. now that the screens are so hard like glass obviously if little particles get trapped and rub it will scratch it. too bad as this was going to be my first gorilla glass product. i hate scratches so will ignore the type cover. even the touch cover will have the same issue if it is completely flush and pressed against the display.
what a damn shame
Click to expand...
Click to collapse
Microsoft likely did consider it, and decided that having a slimmer overall product would generate more revenue.
Some laptops dont have this issue because they have "spacers" around the screen that maintain a small gap between the keys and the screen when closed.
My Thinkpad has markings on its screen from its own keyboard, even though theres a massive 2-3mm gap between the keys and screen when closed. This is because the screen can flex a bit and likely got smushed into my keys (I'm pretty rough with my Thinkpad).
There isnt much you can do about it, almost every product has this issue.
My HTC One sits in my pocket with nothing else in it, and it has markings on it. I haven't been anywhere near a beach since I got the phone.
So like someone else said, all sorts of particles can scratch your screen.
Even Macbooks have this issue, its the reason why people sell specially cut microfiber cloths that are meant to be placed between screen and keyboard when Macbook is closed.
Either get a screen protector, deal with it, or wait a few decades until they make glass strong enough to resist everything.
My HP sleekbook has an imprint from the keys on the screen. I had my laptop bag on the passenger seat of my car, was cut up really badly by someone at 50mph, immediately wished that my car had decent ABS which it doesnt as it made a nice tyre squeal. Laptop bag slammed to floor, opened it up, laptop 100% intact, just has key imprints on the screen which are actually rubbing off (does literally seem to be dirt rather than physical damage).
I have my Surface RT with touch cover. I have been using it for a year. I never put any screen protector and I have scratches on screen. I carry my surface in my bag pretty much every week day. I don't find the scratches affecting any usability or affecting the quality of display. When the screen lights up while using, you are not going to see those scratches that easy. Only when screen off and at certain angle you will be able to see some. It's just a device for use for couple years, relax and enjoy it. Putting screen protector will protect the screen from scratches, but degrade your display color, viewing angle, reflection, brigtness, touch feel, etc.