Related
When I plug it into my computer, my Infuse running CM7 is not recognized when USB mass storage is on or in Odin in Download Mode. Yes, I have tried another USB port with no luck. Any ideas?
jwl12345 said:
When I plug it into my computer, my Infuse running CM7 is not recognized when USB mass storage is on or in Odin in Download Mode. Yes, I have tried another USB port with no luck. Any ideas?
Click to expand...
Click to collapse
Just a quick question, did you installed Heimdall drivers for Infuse lately? that could make Odin not recognize the Infuse, you need to go into devices, look for samsung usb, and revert to previous driver.
If you havent installed heimdall, try another usb cable? my samsung usb cable woudnt detect my Infuse on some ROMS, but the blackberry cable did... ( yeah weird)
If none of that helps idk bro... i dont have that much knowdlege of cm7 =/
Hope some of that helps
jwl12345 said:
When I plug it into my computer, my Infuse running CM7 is not recognized when USB mass storage is on or in Odin in Download Mode. Yes, I have tried another USB port with no luck. Any ideas?
Click to expand...
Click to collapse
What operating system are you running? Win7, Vista, XP, ...? After trying koriotto's suggestions (or in addition to them), just try running ODIN as administrator.
I had the same problem downloaded Samsung PC Studio and that fixed it.
same problem
I'm currently having the same problem, I have the samaung infuse running cm7.2 with [email protected] kernal. Ever since I flashed this Tom my battery life has been more than terrible. So I have been trying to go back to stock for weeks now. I have samsung drivers installed,My computer recongizes that I have the Samsung infuse but wont except the Samsung drivers so I can't access my SD card storage or anything. Also Odin will not recognize my device when its in download mode. Any help would be appreaciated
Try downloading samsung kies... http://www.samsung.com/us/support/owners/product/SGH-I997ZKAATT#... then you'll for sure have the current usb drivers for it. If you currently have kies installed un-install it then download and install. I had some weird driver issues until I did that.
As far as the odin issue:
" Instructions:
1) Make sure the drivers for the Infuse 4G are installed.
2) Please unzip the .zip file.
3) Run Odin3 v1.81.exe (as administrator if you are on Windows 7)
4) Place your phone into download mode (pull battery, press and hold both Volume keys, put battery in and plug the USB cable in)
5) Make sure your phone shows up in Odin as COM## "
copied from http://forum.xda-developers.com/showthread.php?t=1092021
---------- Post added at 10:25 PM ---------- Previous post was at 10:12 PM ----------
cb63herb said:
I'm currently having the same problem, I have the samaung infuse running cm7.2 with [email protected] kernal. Ever since I flashed this Tom my battery life has been more than terrible. So I have been trying to go back to stock for weeks now. I have samsung drivers installed,My computer recongizes that I have the Samsung infuse but wont except the Samsung drivers so I can't access my SD card storage or anything. Also Odin will not recognize my device when its in download mode. Any help would be appreaciated
Click to expand...
Click to collapse
Try another USB cable or port on the computer you're using...or
You could always buy a microSD card and a usb card reader... put zeus or another rom on it. Copy it to the root of the internal SD and flash it in cwm...
I only say zeus because it has awesome battery life and I've read of weird issues people have had that were fixed after flashing zeus. YMMV
Thanks a ton
jwl12345 said:
When I plug it into my computer, my Infuse running CM7 is not recognized when USB mass storage is on or in Odin in Download Mode. Yes, I have tried another USB port with no luck. Any ideas?
Click to expand...
Click to collapse
I downloaded and reinstalled the original Samsung drivers and it worked. Thanks:good:
Hello everyone, I'm new here in XDA community, but been guest for almost a year now. I would like to post my concern in behalf of people using Samsung Galaxy S GT-i9000. I really have problem with when I connect the usb to my pc, it shows on my phone to turn on mass storage, so I did. Now when I turned on, the usb mass storage exits itself and the pc says the USB DEVICE IS NOT RECOGNIZED. I really have tried almost everything, I tried downloading drivers, uninstall and install again the usb device and it won't just work. I really don't know what to do now, I'm using [JB] Helly Bean - GT-i9000 as rom and CWM. I have tried this in a different pc, no luck at all. This happened when I installed PARANOIDANDROID rom and GAPPS and transferred it on my phone, it just freezes and before you know it, usb connection is gone. I really need your help, I've been reading lots and lots of solutions, I want to hear from you what can I do to restore my mass storage connectivity. Any solution you can share, maybe it might work Thank you all.
Cyb3rw0lfest1 said:
Hello everyone, I'm new here in XDA community, but been guest for almost a year now. I would like to post my concern in behalf of people using Samsung Galaxy S GT-i9000. I really have problem with when I connect the usb to my pc, it shows on my phone to turn on mass storage, so I did. Now when I turned on, the usb mass storage exits itself and the pc says the USB DEVICE IS NOT RECOGNIZED. I really have tried almost everything, I tried downloading drivers, uninstall and install again the usb device and it won't just work. I really don't know what to do now, I'm using [JB] Helly Bean - GT-i9000 as rom and CWM. I have tried this in a different pc, no luck at all. This happened when I installed PARANOIDANDROID rom and GAPPS and transferred it on my phone, it just freezes and before you know it, usb connection is gone. I really need your help, I've been reading lots and lots of solutions, I want to hear from you what can I do to restore my mass storage connectivity. Any solution you can share, maybe it might work Thank you all.
Click to expand...
Click to collapse
It can due to a bad USB connection, wrong storage connection options on the device, and so on. Which PARANOIDANDROID version are you using? The 4.1 version is probably having issues on this case. If nothing solves the problem, enable usb debugging, and install QtAdb to access your storage through the ADB bridge.
Hello
I'm having the same issues, what I need to point out is that my i9000 does not even fire up my windows USB dirvers anymore:
For example when I had my phone connected to the pc and it was booting, it would occasionally hear the "found new hardware" chyme but now that does not happen.
The phone still charges but there is no data transfer, I've tried 3 PCs and 3 different USB cables
any ideas ?
Same problem here. tried with different ROMs and multiple PCs. is it a hardware issue or driver related ?
No this is not a driver issue, I even flashed back the stock firmware the phone came with, I think something physically went wrong in the USB module because I cannot find a software fix for this.
another easy question to ask.........jb rom using mtd as third party to transfering data, juz switch back to usb debugging mode in dev sec in setting, if it still doesnt help, check ur custom kernel setting, devillish kernel usually stick to mtd, go to recovery and change it to usb debug in usb connection setting. as semaphore, do not crash da kernel setting with phone setting, choose one, if mackay, thats usb debug default so no prob. as for da one who revert back to gb but still facing same prob, check da usb debug box in dev section in setting, change da port coz ur confusing da windows system with same device but different system!
---------- Post added at 01:22 AM ---------- Previous post was at 01:16 AM ----------
forgot to mention, mtd device in xp doesnt exist, so try to find it urself as i forgot how i solve it, it takes a week for me to find mtd driver for my dear xp's, as for original user of windows, juz update da driver using windows update. as for those who underground~ing, mtd driver can be found on sgs3 driver.
Hi guys
I've managed to fix it by flashing 2.3.6 JVU from samfirmware the european version hope you guys can fix it as well
Cheers
Hi, I have problem to connect my GT- I9003 to computer, I try followings but not useful .
change pc, cable, drivers ...
factory reset, wipe data/factory reset *
*#7284#
usb debug
gingerbreak, z4root
and other solutions that i found in forums
anyone can help me ?
i think there is a software problem and if i can change firmware so it work . but my device don't rooted .
i have 2 question :
1) help for usb connection
2) a method to root without pc
Firmware version: 2.3.4
Baseband version : I9003JXKP3
Kernel version : 2.6.35.7-CL482273 [email protected]#1
Build number : GINGERBREAD.JPKP5
Maybie the usb port is broke......
I think there is no way to root whit no PC.
Sent from my HTC EVO 3D X515m using xda app-developers app
---------- Post added at 09:20 PM ---------- Previous post was at 09:10 PM ----------
O ye maybie you dont have the right drivers or tray using a hard way to root.
Sent from my HTC EVO 3D X515m using xda app-developers app
actually there is way withour connecting to PC.. flashing a zip file from your stock samsung recovery but the file can be bugged/corrupt.etc its not safe so DONT TRY IT.
You said your phone is not detected by your PC and you tried everything why dont you try it with your friends computer/laptop if it still doesnt work then your phone's USB port have some problem.(Hardware Problem)
پاسخ : [Q] problem usb connection
I try with my two laptop. With my car music player, with my office computers but don,t work.
Today try to clean connectors . Then when connect it , the "not recognized..." massage apears. Reinstaling drivers (I have 4 different driver) & reinstaling kies don't change it.
In the past when connect, nothing respond from pc.
In the other try, cut the usb cable from middle, remove cover of each wire , connect red & black wire(they are for charging) and then connect red wires to green wire that becomes from mobile side. So kies logo apears on mobile! When try from other side(green wire from pc) , pc says "not recognized...". But when connect the green wires to eachother , nothing happend.
You sayd install from stock recovery. Try several zip file before. But "failed to verify the whole-file signature" was result.
Is there any zip file that can use from stock recovery. I know instaling stock roms don't need root.
makma said:
I try with my two laptop. With my car music player, with my office computers but don,t work.
Today try to clean connectors . Then when connect it , the "not recognized..." massage apears. Reinstaling drivers (I have 4 different driver) & reinstaling kies don't change it.
In the past when connect, nothing respond from pc.
In the other try, cut the usb cable from middle, remove cover of each wire , connect red & black wire(they are for charging) and then connect red wires to green wire that becomes from mobile side. So kies logo apears on mobile! When try from other side(green wire from pc) , pc says "not recognized...". But when connect the green wires to eachother , nothing happend.
You sayd install from stock recovery. Try several zip file before. But "failed to verify the whole-file signature" was result.
Is there any zip file that can use from stock recovery. I know instaling stock roms don't need root.
Click to expand...
Click to collapse
Installing stock ROM for 2.3.6 doesn't need root access but it requires ODIN.. but you cannot connect to PC.. your USB port of your phone is not working well.. did you try at samsung service centre ??
پاسخ : [Q] problem usb connection
Service center is my last option.
R u able to connect it with mass storage mode..? If S then its a driver problem. If thats the case i'll give u the link of another(not kies) driver.. Install n Try it.. Jst reply
:thumbup:
when you connect your phone to pc, the pc show usb device not reconized, mean most properly, your PC usb driver mass up. try uninstall all USB driver by manually in windows devices manager and reinstall the driver.
پاسخ : [Q] problem usb connection
When I connect nothing respond from pc.
پاسخ : [Q] problem usb connection
I can't connect in mass storage. Not in kies mode too.
makma said:
I can't connect in mass storage. Not in kies mode too.
Click to expand...
Click to collapse
if you dont feel too troublesome, can try reinstall windows.
Sent from my Galaxy Nexus using Tapatalk 2
makma said:
I can't connect in mass storage. Not in kies mode too.
Click to expand...
Click to collapse
thn the only one way i.e left is service centre..
Sent from my GT-I9003 using xda app-developers app
Hi,
I have a problem with my Samsung Galaxy S6 - SM-G920F, it isn't recognized anymore by my PC. This happened after I made a ".nomedia" file to hide some gallery files. I deleted the file but the phone isn't recognized by any PC. When i connect the phone, it is only charging.
I installed TWRP for using the mount feature - not worked.
I installed the latest USB drivers from Samsung - not worked.
I installed Samsung Kies3 - not worked.
I installed Smart Switch - not worked.
I dialed *#0808#, turned MTP - ADB - not worked.
I installed through Odin a stock 6.0.1 Rom from SamMobile - not worked.
I turned on/off the USB debugging - not worked.
I used more than 3 USB cables - not worked.
Device Manager isn't recognizing my phone.
McBook Air isn't recognizing my phone.
The phone is not rooted and it has 4 moths since i bought this phone.
Is there something that I missed on my attempt to solve this problem?
Thank you for your time.
Same problem here, really can't figure this one out.. Tried all of the above too
---------- Post added at 10:32 AM ---------- Previous post was at 10:31 AM ----------
Curious, in device manager under bluetooth it lists my Samsung s6 edge with a generic driver from Microsoft and I can't change it... Misidentified device? Do you have the same?
I assume your phone is unlocked/opened from lock screen when you are connecting it to your pc? ^^
- Renolz
Fully unlocked, & just no notifications :/
renolz said:
I assume your phone is unlocked/opened from lock screen when you are connecting it to your pc? ^^
- Renolz
Click to expand...
Click to collapse
Yes it is, but still not working
moorie said:
Same problem here, really can't figure this one out.. Tried all of the above too
---------- Post added at 10:32 AM ---------- Previous post was at 10:31 AM ----------
Curious, in device manager under bluetooth it lists my Samsung s6 edge with a generic driver from Microsoft and I can't change it... Misidentified device? Do you have the same?
Click to expand...
Click to collapse
My phone isn't seen anywhere... not even in Device Manager
+#0808# is code for usb, you can try dial it (after last # it will run or not, depending on rom), or you can download Shorcut master from Playstore and try run it from secret codes inside app.
It has option to run it from dialer, or with SU if you are rooted, if you manage to run it, set AP and MTP+ADB to see phone as disk in windows, this helped me, hope it will help you.
It is the USB cable I had the same problem and changed the cable twice
Is it fast charging? Mine won't connect on any PC and also won't fast charge. I guess it's a damaged usb port..............
dedei said:
Is it fast charging? Mine won't connect on any PC and also won't fast charge. I guess it's a damaged usb port..............
Click to expand...
Click to collapse
I have this same problem. My phone is not recognized by computer or any program. I was trying update TWRP and now i have samsung logo loop. Before i was updating i have sometimes problem with fast charging and computer dont saw mass storage when i connected phone
I changed completely module with usb in S6 but this dont resolve my problem. I used 3 different cable and changed USB port. I tried with windows XP and win 10.
any suggestions what i can do to bring to alive my S6?
Same problem here, started after updating to Marshmallow.
Exactly same problem with my s6 after 6.0.1 update! Sometimes phone will charge but it wont connect to pc/otg wont work but when i play around with MTP+ADB in *#0808#, s6 wont charge but instead it will be recognised by pc that usb connected not recognised and otg will work!!!!! always vice versa. right now my battery is empty and still wont charge!
---------- Post added at 08:13 AM ---------- Previous post was at 08:11 AM ----------
And looks like there is always a volt output through usb port and that time phone wont receive any charge
Really problematic.. I tried everything cables, drivers, different PC's and nothing.. tried my girlfriends S6 and worked instantly on my PC.
Only happened after official Marshmallow update,grounds for a return?
moorie said:
Really problematic.. I tried everything cables, drivers, different PC's and nothing.. tried my girlfriends S6 and worked instantly on my PC.
Only happened after official Marshmallow update,grounds for a return?
Click to expand...
Click to collapse
1. Power off your device (if it isnt already).
2. Connect to pc in recovery / download mode (just to trigger a response from pc /phone hopefully.
Do you know how to do this? If so, go ahead and proceed and see if the pc recognises your device in those modes
Let me know how that goes
---------- Post added at 03:09 AM ---------- Previous post was at 03:03 AM ----------
popek9 said:
I have this same problem. My phone is not recognized by computer or any program. I was trying update TWRP and now i have samsung logo loop. Before i was updating i have sometimes problem with fast charging and computer dont saw mass storage when i connected phone
I changed completely module with usb in S6 but this dont resolve my problem. I used 3 different cable and changed USB port. I tried with windows XP and win 10.
any suggestions what i can do to bring to alive my S6?
Click to expand...
Click to collapse
Its not a usb port problem
Here are the usb drivers for those having issues. http://developer.samsung.com/technical-doc/view.do?v=T000000117
-Uninstall any previous driver relating to the phone (Also delete package if given the option). Disable windows Update aswell (Win10 Users). Also try install PDA+ from app store and http://pdanet.co/ to see if drivers will be correctly used.
-Make sure its a data cable, not a charge cable as only + and Negative wires are used and there is no way you can use a charge cable as a data cable.
-Connect phone and look for any pop up on screen, if anything pop up click it and see if it has anything to do with MTP or PTP.
-Still having trouble, reset firmware back to stock see how that goes, If not try boot into recovery and follow next step.
-- Once in recovery see if you can ADB push a rom over or a file, if that works then firmware is dodgy and something is missing. (Would recommend Android Tool kit to use this).
-- You could also try to install ADB insecure app ( Find it on XDA forums) and enable USB debugging and see if that will help
If you still can access file via usb when the phone is booted i would say to flash back to stock rom with ODIN and send it in for repairs. (Thats if you can get download USB mode to work)
Visited Samsung store, they said the USB port has failed but KNOX has been tripped some how, genuinely never rooted this phone or even attempted it but they showed me the warranty void status so basically even though they accept it's a hardware fault they won't fix it.
Sent from my (broken) SM-G925F using XDA Free mobile app
Quick answer for how I fixed this (sort of):
Go to "Settings" > "Developer Options" > "USB configuration". My phone indicated "charging". I selected MTP and my phone connected.
Why "sort of" - it reverts to "charging" every time that I connect the phone. I have to do the above all over again.
full history:
Same problem here. S6 on verizon network new in September 2015. Always connected without a problem to whatever computer that I have tried (linux & windows). The problem started after the recent complete software update on 2016-04-02. The phone is defaulting to "charging" and not trying to connect.
Go to "Settings" > "Developer Options" > "USB configuration". If "charging" is active, you know what your problem is. Select MTP (or whatever you need). The phone now connects and I can browse my files from my computer. The remaining problem, is that it reverts to "charging" every time that I connect the phone. Before the code update, there used to be a dialog asking me what I wanted to do (charge, data transfer, etc - sorry, don't remember exact options or how it was worded).
So, nothing to do with drivers missing on my PC. Nothing to do with need to install some other package. Nothing to do with a bad cable. Code was broken on a software update. (Or if you don't consider this to be broken, it was a poor software design decision).
!!! A CODE FIX IS NEEDED !!!
My phone has a peculiar problem.. it doesn't get connected to the laptop. If I connect it, it charge ok but cannot reconagize it as a usb device.. I thought it was the usb port on the phone so I recently got it replaced but it is still the same. Has anyone encountered that ?
Drivers installed? I means both phone drivers and USB port drivers
www.facebook.com/groups/huaweifanclub
Yes.. all the drivers and hisuite installed. It used to work a while back.. but doesn't anymore .. and I don't know how to troubleshoot ..
Do you set on phone to use MTP instead only charging?
www.facebook.com/groups/huaweifanclub
blinkt88 said:
Drivers installed? I means both phone drivers and USB port drivers
www.facebook.com/groups/huaweifanclub
Click to expand...
Click to collapse
blinkt88 said:
Do you set on phone to use MTP instead only charging?
www.facebook.com/groups/huaweifanclub
Click to expand...
Click to collapse
It doesn't ask for it anymore.. computer doesn't give a connection sound even..
Do you try restart phone and than connect?Do you try factory reset?maybe its connector in phone broken
www.facebook.com/groups/huaweifanclub
---------- Post added at 09:15 AM ---------- Previous post was at 09:14 AM ----------
Try enable usb debugging in developer settings
www.facebook.com/groups/huaweifanclub
try with other pc