[Q] problem usb connection - Samsung Galaxy SL i9003

Hi, I have problem to connect my GT- I9003 to computer, I try followings but not useful .
change pc, cable, drivers ...
factory reset, wipe data/factory reset *
*#7284#
usb debug
gingerbreak, z4root
and other solutions that i found in forums
anyone can help me ?
i think there is a software problem and if i can change firmware so it work . but my device don't rooted .
i have 2 question :
1) help for usb connection
2) a method to root without pc
Firmware version: 2.3.4
Baseband version : I9003JXKP3
Kernel version : 2.6.35.7-CL482273 [email protected]#1
Build number : GINGERBREAD.JPKP5

Maybie the usb port is broke......
I think there is no way to root whit no PC.
Sent from my HTC EVO 3D X515m using xda app-developers app
---------- Post added at 09:20 PM ---------- Previous post was at 09:10 PM ----------
O ye maybie you dont have the right drivers or tray using a hard way to root.
Sent from my HTC EVO 3D X515m using xda app-developers app

actually there is way withour connecting to PC.. flashing a zip file from your stock samsung recovery but the file can be bugged/corrupt.etc its not safe so DONT TRY IT.
You said your phone is not detected by your PC and you tried everything why dont you try it with your friends computer/laptop if it still doesnt work then your phone's USB port have some problem.(Hardware Problem)

پاسخ : [Q] problem usb connection
I try with my two laptop. With my car music player, with my office computers but don,t work.
Today try to clean connectors . Then when connect it , the "not recognized..." massage apears. Reinstaling drivers (I have 4 different driver) & reinstaling kies don't change it.
In the past when connect, nothing respond from pc.
In the other try, cut the usb cable from middle, remove cover of each wire , connect red & black wire(they are for charging) and then connect red wires to green wire that becomes from mobile side. So kies logo apears on mobile! When try from other side(green wire from pc) , pc says "not recognized...". But when connect the green wires to eachother , nothing happend.
You sayd install from stock recovery. Try several zip file before. But "failed to verify the whole-file signature" was result.
Is there any zip file that can use from stock recovery. I know instaling stock roms don't need root.

makma said:
I try with my two laptop. With my car music player, with my office computers but don,t work.
Today try to clean connectors . Then when connect it , the "not recognized..." massage apears. Reinstaling drivers (I have 4 different driver) & reinstaling kies don't change it.
In the past when connect, nothing respond from pc.
In the other try, cut the usb cable from middle, remove cover of each wire , connect red & black wire(they are for charging) and then connect red wires to green wire that becomes from mobile side. So kies logo apears on mobile! When try from other side(green wire from pc) , pc says "not recognized...". But when connect the green wires to eachother , nothing happend.
You sayd install from stock recovery. Try several zip file before. But "failed to verify the whole-file signature" was result.
Is there any zip file that can use from stock recovery. I know instaling stock roms don't need root.
Click to expand...
Click to collapse
Installing stock ROM for 2.3.6 doesn't need root access but it requires ODIN.. but you cannot connect to PC.. your USB port of your phone is not working well.. did you try at samsung service centre ??

پاسخ : [Q] problem usb connection
Service center is my last option.

R u able to connect it with mass storage mode..? If S then its a driver problem. If thats the case i'll give u the link of another(not kies) driver.. Install n Try it.. Jst reply
:thumbup:

when you connect your phone to pc, the pc show usb device not reconized, mean most properly, your PC usb driver mass up. try uninstall all USB driver by manually in windows devices manager and reinstall the driver.

پاسخ : [Q] problem usb connection
When I connect nothing respond from pc.

پاسخ : [Q] problem usb connection
I can't connect in mass storage. Not in kies mode too.

makma said:
I can't connect in mass storage. Not in kies mode too.
Click to expand...
Click to collapse
if you dont feel too troublesome, can try reinstall windows.
Sent from my Galaxy Nexus using Tapatalk 2

makma said:
I can't connect in mass storage. Not in kies mode too.
Click to expand...
Click to collapse
thn the only one way i.e left is service centre..
Sent from my GT-I9003 using xda app-developers app

Related

[Q] Help! Odin not detecting my galaxy 3.

Hello, i want help please, anyone can you tell me how to get odin to detect my phone coz it is not detecting the ohne and i m stuck in d middle of installing ics on my phone.
Restart everything
Restart you phone into d/w mode (if your hardware buttons are working ), restart you computer. Now it should detect.
And while you're in the process of flashing, make sure you the cable doesn't get disconnected.
This happened with me too, I just deleted odin & again extracted it from the rom folder(In every kyrillos rom package you can find odin)...
Just delete the old odin & get a new one, it will work...
Sent from my GT-I5800 using Tapatalk
suryarockzz said:
Hello, i want help please, anyone can you tell me how to get odin to detect my phone coz it is not detecting the ohne and i m stuck in d middle of installing ics on my phone.
Click to expand...
Click to collapse
Is this the first time you are using odin in your computer ? or your already detected before only now it is not detecting ?
because odin works fine in my computer , but wen i try it in my friend's computer
it did not detect
-> reinstall your phone drivers it might help
-> if i am correct Odin detect your phone only in download mode
Come out of odin and just plug your phone in to the comp, if the comp recognises it then you know your usb drivers are working fine on phone and comp, if not then thats your problem. reinstall drivers.
If it did recognise then the problem is with odin. Theres loads of versions out there that have pathway issues and other problems due to the way theyve been aquired or packaged. try typing "I5800_Odin_Multi_Downloader_v4.252.exe" its what i did and mine works everytime.
If i helped, hit thanks
Try with another USB port. It will probably work if you´d try, because I had a similar problem. PC simply didn't recognize my Samsung Galaxy 3, but when I plugged the phone in another USB port, the phone was recognized and so was Odin. But of course it wont go without appropriate drivers.
I had the same problem yesterday and switching USB-ports didn't help. It seemed I didn't have Kies installed so the USB-drivers were missing... After installing Kies everything went fine
hey, I had the same issue.. and what I did to resolve was : I downloaded USB drivers from the below link..installed and rebooted my system..and tried again..it finally got detected..I hope it helps..
link for drivers :
forum.xda-developers.com/showthread.php?t=728929
What worked for me was after installing the Samsung driver, I updated the driver from the Device Manager while the phone was plugged in and in download mode.Odin found the phone after that.
Battery percentage
Make sure your Battery Percentage is More than 50 %
Check your USB cable is in Working Condition .....
-fgfgdf

[Q] usb cable charges phone not connect it for data transfer

hey guyz,
I am new in the forum. I am having problem in connecting the phone to my PC. whenever i connect it to the usb, it starts charging without any notification asking for connecting through usb or else. how to connect it through my PC?
You need usb drivers installed on your pc...
Typed using a small touchscreen
a.cid said:
You need usb drivers installed on your pc...
Typed using a small touchscreen
Click to expand...
Click to collapse
But windows automatically installs the drivers right? (if not found)
echo104 said:
But windows automatically installs the drivers right? (if not found)
Click to expand...
Click to collapse
No...
It installs drivers if the device already has the same included...
Fit is not plug-and-play, which means you need to install drivers manually...or install kies...
Whichever you prefer...
Typed using a small touchscreen
Dont go for KIES .... !! It's a crap ..
avilove4u said:
Dont go for KIES .... !! It's a crap ..
Click to expand...
Click to collapse
You don't have to use it if you don't want. Installing Kies means you're installing USB drivers, you don't have to start kies everytime when you connect ur phone through usb. I've installed kies but never used it. I use it HIGHLY OCCASIONALLY.
Yup kies is waste of mem (if u ask me ) for drivers go to sammobile website registr n check our phn specific drivers its just around 25mb file dats easy if u dnt want kies
I found it easier to install drivers kies then uninstall kies
Sent from my GT-I9100 using XDA
I have installed the drivers which were given in the thread (http://forum.xda-developers.com/showthread.php?t=1606380) but still it is not recognized by windows 7. it still starts charging. i have tried even toggling the debug mode.
but still no luck. any other option guyz?
thanks in advance.
Install kies then...
Typed using a small touchscreen
Even after installing kies it is still charging. Device is not connected to kies.
hey i am using the usb cable of galaxy ace. is it the problem? but i think these cables can be used on both the devices.
I use the same cable on 2 different blackberry's, my nokia 5310 and c3, samsung monte, and acer liquid metal...
So I don't think that's the problem...
Have you tried using a different computer?
yes i have triedon different computers also.. but its not working there too.
Hi.
I had the problem too. I did this to connect my phone:
1. Go in DownloadMode. Now, the computer must install drivers, like odin.
2. If the installation finished, hold down the Powerbutton for 10 seconds. It'll restart, if nothing happens try to start with holding the powerbutton again.
3. Then, if the phone is started, your computer finds the phone!
I'm not responsible for any damages!!!!
greetings,
TheRealFelix0212
Sent from my GT-S5670 using xda-developers app
USB
Your usb cable is not good man..i had the same experience.Try some other cable.
Install the drivers or Samsung Kies
USB cable
hey i have a usb cable that works with nokia but not with my nexus s.Please try another cable man.
Belive me.
press thanks if this helps...

help Can't get USB reconzied on pc using odin com

Back in Feb i was suscessuful on installing all_in_one_odin_ep4d. My pc pick up the USB connection and i was able to get the com 3 on odin.
Now i'm tryin to bring phone back to factory. and having issues getting the usb connection. i have the samsung drivers.
I also tried on 2 other laptops and no USB.
I also tried the SDCard patch and not sure if i did that right ??
Thanks
janey
janey6152 said:
Back in Feb i was suscessuful on installing all_in_one_odin_ep4d. My pc pick up the USB connection and i was able to get the com 3 on odin.
Now i'm tryin to bring phone back to factory. and having issues getting the usb connection. i have the samsung drivers.
I also tried on 2 other laptops and no USB.
I also tried the SDCard patch and not sure if i did that right ??
Thanks
janey
Click to expand...
Click to collapse
If cwm is installed use the cwm factory zip to restore to stock
Sent from my Galaxy Nexus using xda premium
Did you try any other cables? That can cause a problem too...
Still Charged Up
Reilly1812 said:
Did you try any other cables? That can cause a problem too...
Still Charged Up
Click to expand...
Click to collapse
I was trying to use a USB extension cable and it wouldn't work. Then I tried it without the extension and it works fine.
Tried different usb plug connection , tried different wire nothing..
I have ROM Manager
Can i use that ?
janey6152 said:
Tried different usb plug connection , tried different wire nothing..
I have ROM Manager
Can i use that ?
Click to expand...
Click to collapse
That's a big NO NO..
SENT FROM THE DOG POUND
OK so How do i get it back to Stock ???
the cwm factory zip to restore to stock How do i do that ????
help Can't get USB reconzied on pc using odin com
help Can't get USB reconzied on pc using odin com

[Q] Galaxy Tab 2 7.0 will not enter file transfer mode

I am running Jelly Beast 4.2 on my tablet, and I cannot get it to transfer files to any computer, windows or mac. When I connect the USB cable, it will charge, and I have tried both MTP and PTP, but nothing ever pops up on my tablet or computer. I even tried switching to Sungsonic ROM, but it still doesn't work.
usb driver
buddy u ned to install Samsung usb driver in order to detect d device in pc
u cn do so by either installing kies or jst serch xda 4 usb driver, I remember a page here frm where I hav downloaded it..
I think the problems is deeper than that. I have the driver installed, but the computer does not recognize that a USB device is plugged in, and the tablet goes into charge mode
Sent from my GT-P3113 using xda app-developers app
Don't have ur Tab......
To enter download mode u have to have ur tablet disconnected from the computer. Then once u r in download mode then open Odin and then plug ur tablet into your computer.
Off late I hav started facing the same issue
Viz. I hav drivers instaled (tried two of em) , bt it doesn't show up on the pc. Just a error mesg on the tab saying that no compatible software found on pc and all...
Btw did u fix the issue ?
If its helping you it must be thanked.
Send from my GT-P3100 using xda premium

[Q] Please Help!!! .. my devise doesn't show any notification about usb connection

Please Help !! .. my devise is GT-i8262 (samsung galaxy core dous)
When i am trying to connect the usb it dosen't show any thing on my devise like i am connecting a charger i changed the usb and on a nother computer but nothing is Different
and removed the usb driver and installed it again ..
:crying: now i cant back to the stock rom because of the usb
please heeeeeeeeelp!
It's problem of ur Usb cable,try different csbles! If it doesnt work,then Reflash windows newly on computer & wait till driver recognition finishes.
nand.96 said:
It's problem of ur Usb cable,try different csbles! If it doesnt work,then Reflash windows newly on computer & wait till driver recognition finishes.
Click to expand...
Click to collapse
but i think the problem is from my devise because it dosen't say any notification about the usb connected
and i replaced the usb and working on another devise
Then try connect to any other pc..unless flash windows again

Categories

Resources