Related
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Do you have one for FID BN?
Sent from my GT-S5830 using xda app-developers app
Fid bn tb782b?
Need the ROM for FID BN TB782B, Can someone help so I can unbrick my Zeki 7? Thanks!
Thanks alot
I was searching for these ROM from along time. You saved my tablet.
in need of some help
Hello!
I bought 3 zeki tablets for my kids for xmas. I was able to follow another thread to put google play on them, and 2 of the 3 work great.
One of the tablets keeps freezing though. I did a factory reset, but in doing so, google play update stayed. So I found this thread and tried to follow the directions above.
Now I can't even get the tablet to turn on. :/
I am assuming it is something I did, and I am hoping that someone can help.
Thank you in advance!!
What's the FID shown on the back case.
Sent from my GT-N7000 using xda premium
Does this firmware add any new features? Also does the android version change?
Sent from my GT-S5830 using xda premium
Reflash the rom
Sent from my GT-N7000 using xda premium
All the rom is Andriod 4.04
Sent from my GT-N7000 using xda premium
Please help
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
i cant install the driver
am formated the pc and also tried in another pc
please help me
Pratheesh T K said:
i cant install the driver
am formated the pc and also tried in another pc
please help me
Click to expand...
Click to collapse
I am in desperate need of a rom dump or even just the ft5x_ts.ko from a non 4.04 upgraded version of the Zeki TB 782B. If anyone reads this anymore and has one that has no been updated please send me a reply, I have found a way to repair ALL currupted FT5x touch panels but need an unmodified module to verify the process will work on other models as well.
Thanks.
i have the Zeki Quad Core 4.4.2 Android Tablet and i rooted it but now im looking for a custom recovery that supports my device can anyone help?
Link dead
This link is no longer work
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
Dose anyone have new link that works or where I can find the tool
Not Working Getting Stuck @ 51%
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
I have run the Livesuite and it appears to not work and I have been stuck for quite sometime. I need some help with getting a proper working image I was going to try to use:
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
but the link is no longer active and would I haven't been able to use my tablet the other link is where it get stuck at 51% when trying to transfer the image
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
from this one and always gets stuck in the loading process of 51%
any other help with a link to the original image would be greatly appreciated. Thank you in advance!
I've tried many different ways and many have failed me, so I'm documenting one way which worked for me.
You will need the Acura recovery
http://www.mediafire.com/?5io5b2r98nt28bb
and gazhead's SU zip
http://forum.xda-developers.com/attachment.php?attachmentid=1352095&d=1348524309
Preparation
Extract the recovery package
Step 1: Drivers
Make sure you have the OMAP 4430 drivers installed.
If you do, skip this step
Note: On windows 8, you will need to have rebooted your computer into a mode which lets you install unsigned drivers. Do a Google search to find out how.
To install the omap drivers:
Turn off the phone
Remove the battery
Open Windows' device manager
Connect the phone to the PC.
When OMAP4430 appears in your list of devices, double-click on it and select "update driver software"
When asked, pick the usb_drv_windows folder extracted from the recovery package and go through with the installation
When the installation has completed, you should have a new category called "Ti Boards" with the OMAP4430 USB device under it.
Step 2: Installing recovery
Disconnect the phone
Go to the recovery folder and launch "Instalar Recovery ICS Europeo.bat"
The script will be waiting for the phone to be connected.
Press "vol up"
Connect your phone, without any battery
As soon as the script does something, release the button and insert the battery
As soon as the script stops, disconnect the USB cable.
When you see the silver LG logo, connect the USB cable again
The script should complete its task soon after that.
Note: If the script is waiting for something, pay attention to your list of devices, you may have a LG COSMO device which has no drivers. If this is the case, install the OMAP4430 drivers and start the script again.
Step 3: Rooting
Put gazhead's file on your SD card
Turn off phone
Press "vol down" + 3D button + power to boot into recovery
Install the zip file from your SD card
Reboot
That's it. Help me improve this post by reporting any errors you see and I hope this will save people some time
All the information contained in this thread comes from this post in Spanish.
ofutur said:
I've tried many different ways and many have failed me, so I'm documenting one way which worked for me.
You will need the Acura recovery
http://www.mediafire.com/?5io5b2r98nt28bb
and gazhead's SU zip
http://forum.xda-developers.com/attachment.php?attachmentid=1352095&d=1348524309
Preparation
Extract the recovery package
Step 1: Drivers
Make sure you have the OMAP 4430 drivers installed.
If you do, skip this step
Note: On windows 8, you will need to have rebooted your computer into a mode which lets you install unsigned drivers. Do a Google search to find out how.
To install the omap drivers:
Turn off the phone
Remove the battery
Open Windows' device manager
Connect the phone to the PC.
When OMAP4430 appears in your list of devices, double-click on it and select "update driver software"
When asked, pick the usb_drv_windows folder extracted from the recovery package and go through with the installation
When the installation has completed, you should have a new category called "Ti Boards" with the OMAP4430 USB device under it.
Step 2: Installing recovery
Disconnect the phone
Go to the recovery folder and launch "Instalar Recovery ICS Europeo.bat"
The script will be waiting for the phone to be connected.
Press "vol up"
Connect your phone, without any battery
As soon as the script does something, release the button and insert the battery
As soon as the script stops, disconnect the USB cable.
When you see the silver LG logo, connect the USB cable again
The script should complete its task soon after that.
Note: If the script is waiting for something, pay attention to your list of devices, you may have a LG COSMO device which has no drivers. If this is the case, install the OMAP4430 drivers and start the script again.
Step 3: Rooting
Put gazhead's file on your SD card
Turn off phone
Press "vol down" + 3D button + power to boot into recovery
Install the zip file from your SD card
Reboot
That's it. Help me improve this post by reporting any errors you see and I hope this will save people some time
All the information contained in this thread comes from this post in Spanish.
Click to expand...
Click to collapse
This method not working for me :/
I do successfull step 2, but Recovery menu not working (i have balck screen)
animavitis said:
This method not working for me :/
I do successfull step 2, but Recovery menu not working (i have balck screen)
Click to expand...
Click to collapse
Are you sure that you pressed:
"vol down" + 3D button + power
?
It seems the combination changes depending on the recovery...
I tried this but when the phone rebooted and the script waits for device my phone is at the S/W screen with the korean writing. i didnt want to go any further, is this normal?
Mozzytm said:
I tried this but when the phone rebooted and the script waits for device my phone is at the S/W screen with the korean writing. i didnt want to go any further, is this normal?
Click to expand...
Click to collapse
Try releasing the vol key before inserting the battery. This worked for me.
Sent from my LG-P920 using xda app-developers app
Mozzytm said:
I tried this but when the phone rebooted and the script waits for device my phone is at the S/W screen with the korean writing. i didnt want to go any further, is this normal?
Click to expand...
Click to collapse
fastboot failed to load , try again until you get the fastboot menu , try to press vol- instead of vol+ or even no vol button at all
I cant enter recovery mode
i just installed and then pressed the buttons but it doesnt work
Edit: I rooted by installing TWRP recovery and it worked
Lets say i TOTALLY screw this up.. what is the absolute worst case scenario? Can i brick it or is soft brick worst case?
It can be fixed
Send from my XBSA ICS V7.2 P920.
Space for Apps
Good evening, the home version of SU760 had 2GB of space for installing applications ... Already the European version of the P920, only has 1GB of internal memory dedicated space .... Is there a way to change this? Well I tried to restore the apps that I had, and gave memory overflow ...
Thanks
Translate by Google
Is there any chance of "security error" with this?
Sent from my LG-P920 using xda app-developers app
Hi,
I recently bricked my LG Optimus 3D and am trying to install the software again. I am using the steps:
1.Download and Extract “LG Flash Pack”, you will get “LG Flash Tool 1.2″, “OMAP drivers” and “LGUnitedMobileDriver”
2.Install the LGUnitedMobileDriver from the pack
3. Install Flashtool 1.2 and apply crack
4. Install TI OMAP 4430 driver:
-Remove the SD card and SIM from your phone
-Remove the battery from your phone
-Open the device manager and plug the phone to your PC
-In the device manager, you will see TI OMAP 4430 appearing and disappearing
-Double click on it when it appears and click update driver
-The select Scan my computer for drivers
-Then click on “Let me slect from the device driver list”
-Click next, and now click on “Have disk”
-Show the driver from the Flash Pack you just have downloaded
-Install the unsigned driver and you are good to go
5. Run start_fastboot from the omap4boot-for_optimus-v1.11 folder and choose option 2, enter
6. Remove the battery from the phone and start pressing the Vol+ button.
7. Now connect the phone to PC, Omap4boot will flash some files and will wait for 5 seconds for you to plug the battery back.
8. Immediately plug the battery back (better have the phone turned upside down and the battery in the back but not loaded into slot so that you can load it into the slot quickly)
9. Phone will boot into GREEN SOFTWARE DOWNLOAD mode
10. Go to device manager and change the port “LGE CDMA USB SERIAL PORT” to “com41″.
11.Run LGFlashTool.
12.In DLL select file “LGP920_110622.dll”
13. In S/W select only *.bin file that you have downloaded
14. Choice (Check) “USB” and click OK.
15. Click on Port COM settings(COM plug icon)
16.Check as on photos.
17. Click start(The Port 1 window should appear READY).
18. Disconnects USB cable and wait 5 seconds.
19. Press and hold voll up button in LG Optimus 3D and connect USB cable.
20. The update process will begin automatically after that release the “vol up”.
21.When the progress bar reaches 100%, Power ON the LG Optimus 3D.
However, I'm stuck on step 21. When the progress bar reaches 100%, Power ON the LG Optimus 3D. My phone automatically turns of when I'm around 34% and the flash tool says 'download fail' because my phone turned off.
How do I fix this PLEASE?
Thanks.
mnc221 said:
Hi,
I recently bricked my LG Optimus 3D and am trying to install the software again. I am using the steps:
1.Download and Extract “LG Flash Pack”, you will get “LG Flash Tool 1.2″, “OMAP drivers” and “LGUnitedMobileDriver”
2.Install the LGUnitedMobileDriver from the pack
3. Install Flashtool 1.2 and apply crack
4. Install TI OMAP 4430 driver:
-Remove the SD card and SIM from your phone
-Remove the battery from your phone
-Open the device manager and plug the phone to your PC
-In the device manager, you will see TI OMAP 4430 appearing and disappearing
-Double click on it when it appears and click update driver
-The select Scan my computer for drivers
-Then click on “Let me slect from the device driver list”
-Click next, and now click on “Have disk”
-Show the driver from the Flash Pack you just have downloaded
-Install the unsigned driver and you are good to go
5. Run start_fastboot from the omap4boot-for_optimus-v1.11 folder and choose option 2, enter
6. Remove the battery from the phone and start pressing the Vol+ button.
7. Now connect the phone to PC, Omap4boot will flash some files and will wait for 5 seconds for you to plug the battery back.
8. Immediately plug the battery back (better have the phone turned upside down and the battery in the back but not loaded into slot so that you can load it into the slot quickly)
9. Phone will boot into GREEN SOFTWARE DOWNLOAD mode
10. Go to device manager and change the port “LGE CDMA USB SERIAL PORT” to “com41″.
11.Run LGFlashTool.
12.In DLL select file “LGP920_110622.dll”
13. In S/W select only *.bin file that you have downloaded
14. Choice (Check) “USB” and click OK.
15. Click on Port COM settings(COM plug icon)
16.Check as on photos.
17. Click start(The Port 1 window should appear READY).
18. Disconnects USB cable and wait 5 seconds.
19. Press and hold voll up button in LG Optimus 3D and connect USB cable.
20. The update process will begin automatically after that release the “vol up”.
21.When the progress bar reaches 100%, Power ON the LG Optimus 3D.
However, I'm stuck on step 21. When the progress bar reaches 100%, Power ON the LG Optimus 3D. My phone automatically turns of when I'm around 34% and the flash tool says 'download fail' because my phone turned off.
How do I fix this PLEASE?
Thanks.
Click to expand...
Click to collapse
What are u trying to flash? Gb or ICS?
Did you tried to flash the baseband also?
U can flash both at the same time.
@80% ca you should have "target reset" then your phone go off.
Flashtool should give you an error but your phone should be ok.
Battery is charged?
LG Flash Tool does not work because phone turns off during download
Hi Experts,
I have the same problem. Following the steps described above the phone which is in "green S/W" download or "emergency download mode (initiated by the flashboot.bat) always turns off after some 2-3min during the flashing process with the LG Flash Tool. This 2-3 minutes are only sufficient to go up to 27-28% for me. then download fails. I am pretty sure my battery has power! How can one prevent the phone in "emergency download mode" to go off after 3 min????
I would not be able to tell you any details on which parts I want to flash. I am just following the procedure described above because my phone is totaly bricked and I need a complete restore with everything which needs restoring...
Thanks for any help on this one.
Cheers,
S
sauronsauron said:
Hi Experts,
I have the same problem. Following the steps described above the phone which is in "green S/W" download or "emergency download mode (initiated by the flashboot.bat) always turns off after some 2-3min during the flashing process with the LG Flash Tool. This 2-3 minutes are only sufficient to go up to 27-28% for me. then download fails. I am pretty sure my battery has power! How can one prevent the phone in "emergency download mode" to go off after 3 min????
I would not be able to tell you any details on which parts I want to flash. I am just following the procedure described above because my phone is totaly bricked and I need a complete restore with everything which needs restoring...
Thanks for any help on this one.
Cheers,
S
Click to expand...
Click to collapse
Had the same problem.
Try this Link: http://forum.xda-developers.com/showthread.php?t=2360358[/URL]
mnc221 said:
Hi,
I recently bricked my LG Optimus 3D and am trying to install the software again. I am using the steps:
1.Download and Extract “LG Flash Pack”, you will get “LG Flash Tool 1.2″, “OMAP drivers” and “LGUnitedMobileDriver”
2.Install the LGUnitedMobileDriver from the pack
3. Install Flashtool 1.2 and apply crack
4. Install TI OMAP 4430 driver:
-Remove the SD card and SIM from your phone
-Remove the battery from your phone
-Open the device manager and plug the phone to your PC
-In the device manager, you will see TI OMAP 4430 appearing and disappearing
-Double click on it when it appears and click update driver
-The select Scan my computer for drivers
-Then click on “Let me slect from the device driver list”
-Click next, and now click on “Have disk”
-Show the driver from the Flash Pack you just have downloaded
-Install the unsigned driver and you are good to go
5. Run start_fastboot from the omap4boot-for_optimus-v1.11 folder and choose option 2, enter
6. Remove the battery from the phone and start pressing the Vol+ button.
7. Now connect the phone to PC, Omap4boot will flash some files and will wait for 5 seconds for you to plug the battery back.
8. Immediately plug the battery back (better have the phone turned upside down and the battery in the back but not loaded into slot so that you can load it into the slot quickly)
9. Phone will boot into GREEN SOFTWARE DOWNLOAD mode
10. Go to device manager and change the port “LGE CDMA USB SERIAL PORT” to “com41″.
11.Run LGFlashTool.
12.In DLL select file “LGP920_110622.dll”
13. In S/W select only *.bin file that you have downloaded
14. Choice (Check) “USB” and click OK.
15. Click on Port COM settings(COM plug icon)
16.Check as on photos.
17. Click start(The Port 1 window should appear READY).
18. Disconnects USB cable and wait 5 seconds.
19. Press and hold voll up button in LG Optimus 3D and connect USB cable.
20. The update process will begin automatically after that release the “vol up”.
21.When the progress bar reaches 100%, Power ON the LG Optimus 3D.
However, I'm stuck on step 21. When the progress bar reaches 100%, Power ON the LG Optimus 3D. My phone automatically turns of when I'm around 34% and the flash tool says 'download fail' because my phone turned off.
How do I fix this PLEASE?
Thanks.
Click to expand...
Click to collapse
flash fastboot by Follow this method http://forum.xda-developers.com/showthread.php?p=44532338&nocache=1
flash fastboot and Replace the original boot and download mode download the following file http://www.mediafire.com/download/b...for_optimus-v1.22+modified+by+XcachorroX®.rar
and Follow step
flash fastboot and Replace the original boot and download mode Until the fastboot is the basic boot for device.
Connect phone without battery,phone detect OMAP4430 {device manager}
Install driver omap "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) by select update driver then select browse my computer for driver {install driver Manual}
After driver installation ends remove usb cable
Run start_fastboot.bat and select option 2
Pull out battery
Hold Vol+
Connect USB cable, the usbboot will start
Insert battery while the usbboot is waiting
and follow the instructions,after this you see logo LG Gray in phone He asks you entered fastboot Answer no and accept to flash and Replace the x-loader / u-boot source
If the LG COSMO appears in device manager install driver for her by select update driver then select browse my computer for driver {install driver Manual} and select Install driver from "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) then try again step 2 flash fastboot
Optimus 3D Unbricking And Upgrading
Preparation
1. LG Mobile Drivers http://mediafire.com/?ouuw4u8f9f1gl1d
Download and Install ............
2. LG Flash Tool http://forum.xda-developers.com/attachment.php?attachmentid=2194618&stc=1&d=1376737065
Download And Extract
3.Omap-4-Boot http://forum.xda-developers.com/attachment.php?attachmentid=1641950&d=1358098807
Download And extract to any destination
4.Download And Extract The Firmware Packages For Your Phone
P920 http://d-h.st/RC5
SU760 http://d-h.st/2ag
In these packages u will find
1. .DLL file
2. .BIN file
3. .FLS file
For Bricked Phones
1. Take the battery out and connect the phone to the pc with USB Cable with volume up button pressed and held. Some Drivers Will Be Installed but OMAP4430 Driver Wont Install (specially on win7).Leave Vol . up after driver installation
2.Go In ur Windows Directory suppose C:
Go in c:\windows\system 32
there u will find a file cmd.exe , Run It as Administrator.
3.Type: set devmgr_show_nonpresent_devices=1 and press enter
Then Type devmgmt.msc and press enter device manager will open up.
4.Go in View Menu And check "show Hidden devices"
5. The Omap4430 Device Will be visible Now. Update its driver and choose "select Driver From Specific Location" and guide it to the omap 4 boot folder. there will be a folder named usb_drv_windows in the omap 4 boot folder. guide it to the usb_drv_windows folder and click ok driver search will begin . if asked click on install driver anyway. Then go in ports and open properties of LGE MOBILE USB SERIAL PORT. open advanced tab and change the port to COM 41
6.Open LG Flash tool . In the dll Folder Select the respective .DLL file. In the S/W box select both the .BIN and .FLS file and click ok.
7. Click On the Port Icon (Cable Icon) and select all the ports.
8. Click on the Arrow Icon and u will see many Ready Signs. This is The Flash Ready State.
9.Open Omap 4 boot folder and run "start fast boot.bat" and select your respective device.
10.when u see a msg like "waiting For Device Omap44xx" Take the battery out and connect the phone to the pc via Data cable.
Some Sudden Information Will be displayed . U Have to immediately put the battery in and hold the vol. up till phone boots to download mode.It will be something like S/W blah blah blah for su760
11. Look at ur LG flash tool in the first box the flashing process will start. It will not work if battery is low (YES ITS A FACT)
12. Flashing Process will not Complete but phone will restart and ur phone will be unbricked when it restarts.
13. Again Put The Flash Tool In Flash Ready State
14. Now Remove the Battery .
15. Dont use Omap4boot This time. hold the vol.up button and connect usb cable.Put in the Battery. Phone will boot to Download Mode . Instead if u see the LG logo remove the battery and immediately put it back in while the vol.up is still pressed . do this 1 or 2 times and ur phone will enter download mode. when it enters download mode leave the vol up button.
16. LG flash tool will start flashing when bar reaches 33% to 35%. Phone will restart and Flashing will jump to 80%.
17. Thats it ur phone is unbricked and Fixed. Turn Phone On If It does not turn on automatically and enjoy
For Non- Bricked Phones
1. Open LG Flash Tool Select the .DLL file in the dll box and select the other two .BIN and .FLS file in the S/W box
2. Click On the Port Icon (Cable Icon) and select all the ports.
3. Click on the Arrow Icon and u will see many Ready Signs. This is The Flash Ready State.
4. Now Remove the Battery .
5.Hold the vol.up button and connect usb cable.Put In the Battery. Phone will boot to Download Mode . Instead if u see the LG logo remove the battery and immediately put it back in while the vol.up is still pressed . do this 1 or 2 times and ur phone will enter download mode. when it enters download mode leave the vol up button.
6. LG flash tool will start flashing when bar reaches 33% to 35%. Phone will restart and Flashing will jump to 80%.
7. Thats it ur phone is unbricked and Fixed. Turn Phone On If It does not turn on automatically and enjoy
there is about 2-3 complete and several noncomplete guides for that already
p-vlad said:
there is about 2-3 complete and several noncomplete guides for that already
Click to expand...
Click to collapse
Bro i completed IT just have to find the right LG flash tool which would be easy for people to use
iamtalha said:
Bro i completed IT just have to find the right LG flash tool which would be easy for people to use
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1244490&highlight=unbrick
http://forum.xda-developers.com/showthread.php?t=2246001&highlight=unbrick
http://forum.xda-developers.com/showthread.php?t=1942836&highlight=unbrick
http://forum.xda-developers.com/showthread.php?t=2336215&highlight=unbrick
http://forum.xda-developers.com/showthread.php?t=2037287&highlight=unbrick
etc.
p-vlad said:
http://forum.xda-developers.com/showthread.php?t=1244490&highlight=unbrick
http://forum.xda-developers.com/showthread.php?t=2246001&highlight=unbrick
http://forum.xda-developers.com/showthread.php?t=1942836&highlight=unbrick
http://forum.xda-developers.com/showthread.php?t=2336215&highlight=unbrick
http://forum.xda-developers.com/showthread.php?t=2037287&highlight=unbrick
etc.
Click to expand...
Click to collapse
Thats Nice Man . You Can Use Those Guides. You Dont Have To mess with my thread if u dont like it
Today I am sharing how to root MMX A110 using sp flash tools
First you need some things download below
1) CWM recovery
http://d-h.st/Ky2
Thnxx @suhas.holls
2) MMX A110 Drivers
http://www.mediafire.com/?5ai8nwihmp30grw
3) VCOM drivers
http://www.mediafire.com/?3wec990b42j3nn7
4) SP flash tools
http://www.mediafire.com/?b111ivr9it76cma
5) Supersu.zip
http://www.mediafire.com/?i1y443she8hlby6
6) MT6577 scatter file
http://www.mediafire.com/?2cp7i70khi8fe84
Now after downloading all things
1)Install The drivers in your PC or lappy whatever, window xp or 7 should be used.
2)Now first copy supersu.zip into root(out of every folder)of your phone's SD card
3) Now in developers option tick USB Debugging
4) Switch off the phone remove then replace battery and connect it to PC now your PC will install MTK preloaders.
5) Now remove data cable and don't turn on the phone, if its turned on itself then turn it off
6) Now open sp flash tools folder and open spflashtools.exe , search for the option "Scatter-Loading" and click on it and locate the scatter file you downloaded.
7) A list will appear then untick all except"Recovery"
8) Click on recovery and locate the cwm recovery you downloaded.
9) After selecting recovery insert data cable in PC and not in phone only connect one side i.e. to the PC.
10)Now click on download button and a countdown will start in the lower progress bar then connect your phone (in switched off state) Then a yellow bar and a green bar will appear and after that a green ring will appear saying "Download OK".
Your phone's recovery is now cwm.
11) Now remove phone and press Volume up volume down power key simultaneously and a mode will appear with two option recovery mode and factory mode.
12) Using volume up choose recovery mode and press power key.
13) then choose again recovery mode and press volume down key.
14) Now choose Install a zip from SD card and select"supersu.zip"And after installing it reboot your phone.
After rebooting you will find an app named Supersu
Hurray Your phone is rooted and now it has endless things to do.
Remember- Rooting void your phone's warranty
If you liked my work, please Hit thanks button it will motivate me and won't cost you.
Important
avinash130413 said:
Today I am sharing how to root MMX A110 using so flash
I am not responsible if anything happens to your phone, do at your own risk..
Click to expand...
Click to collapse