I own a Galaxy Note 10.1 WiFi N8010, was bought in Germany quite some time ago (so CSC is German),
It came with 4.0.3, which was later updated to 4.0.4 and then to 4.1.1. Currently it is running Jellybean 4.1.1.
I had found the Exynos exploit and used it to root my device. The 4.1.2 update came out so I unrooted my device.
The "Device Status" shows "OFFICIAL".
The device received an OTA package, started installing it, started the count to 100%, and at 28-29 percent, the update stopped, the device rebooted, reported a failure and sent me to KIES.
I have some problems with KIES so I am looking for other solutions.
I thought maybe I'd use Mobile Odin to flash the stock firmware but I found it needed a flashkernel which I do not know how nor want to install right now. I was thinking about using ODIN to flash the firmware, but the size of the firmware scared me. I am used to flash 300MB SBF files on my Motorola Defy but this 1GB firmware is insane! I am afraid my computer will suddenly shut down and I will get a hard brick. Anyway, assuming I got over this fear, I have a couple of questions:
1. Does flashing with ODIN delete the user data?
2. Assuming I want to delete my data (like factory reset) - what options should I choose in ODIN when I flash?
3. Are there any options not including ODIN, KIES or the computer in general?
Related
To update from kies, do i need to be unrooted (running stock rooted)... If so, how do you unroot GT 3113??
kan_bleach said:
To update from kies, do i need to be unrooted (running stock rooted)...
Click to expand...
Click to collapse
Nope, you don't have to do anything. Just connect your tab via usb cable and run Kies. If a FW update is available you will be notified as soon as the Kies start...
JIMBOAthens said:
Nope, you don't have to do anything. Just connect your tab via usb cable and run Kies. If a FW update is available you will be notified as soon as the Kies start...
Click to expand...
Click to collapse
I am doing that but kies keeps on disconnecting....though this is the issue with most of the people right now..
kan_bleach said:
I am doing that but kies keeps on disconnecting....though this is the issue with most of the people right now..
Click to expand...
Click to collapse
bro no matter rooted or unrooted when connected to kies it will show update if available.and disconnection problem is with most of tab 2 user.so there are two ways wait for fota or go to service center and get tab updated.
I've tried to update my rooted P3113 from wifi download, not by KIES.
No success! It must be because of the CWM recovery installed, since the tab automatically boots to recovery after downloading updates from samsung. I think the samsung official update scenario stucks at this point (because there is no standart android recovery after CWM installed).
When i'm trying to update rooted P3113 from KIES - no success too, because of "disconnection" problem.
So, we waiting for the stock 4.0.4 rom file for CWM recovery.
Root or unrooted doesn't matter. My tablet is stock and never rooted and Kies was still messing up. Luckily I finally got the OTA this morning.
When I checked for update from my device. It says no update is available. How to get the update?
Sent from my GT-P3113 using xda app-developers app
I have a Galaxy Tab 2 7.0 that was rooted and the other day when I turned it on it started updating my tablet. However, the update failed. Probably because I was rooted. So I unrooted the tablet and every time I check for updates it says there are NO updates. I installed Kies on Windows and (after connecting to it with the GTab2 7) it shows me that there IS an update for it. However, every time I click on update it disconnects after a few seconds and and goes back to the initial screen saying there is an update.
So, I can't install it via Kies. And now I when I check for updates it says there are NO updates. Am I totally screwed OR what.
When the update failed, I think when it rebooted to install it THAT it came up to CWM and that is why it failed BUT now CWM is gone and I am definitely NOT rooted with stock ROM on the machine.
However, I see in the settings under STATUS that is shows "modified" instead of "normal".
Is there any way to reset the status? Or is it necessary?
---grobin
grobin said:
I have a Galaxy Tab 2 7.0 that was rooted and the other day when I turned it on it started updating my tablet. However, the update failed. Probably because I was rooted. So I unrooted the tablet and every time I check for updates it says there are NO updates. I installed Kies on Windows and (after connecting to it with the GTab2 7) it shows me that there IS an update for it. However, every time I click on update it disconnects after a few seconds and and goes back to the initial screen saying there is an update.
So, I can't install it via Kies. And now I when I check for updates it says there are NO updates. Am I totally screwed OR what.
When the update failed, I think when it rebooted to install it THAT it came up to CWM and that is why it failed BUT now CWM is gone and I am definitely NOT rooted with stock ROM on the machine.
However, I see in the settings under STATUS that is shows "modified" instead of "normal".
Is there any way to reset the status? Or is it necessary?
---grobin
Click to expand...
Click to collapse
Dude how did you unroot???
kan_bleach said:
Dude how did you unroot???
Click to expand...
Click to collapse
You don't need to unroot, just flash 4.0.4 firmware with odin as i described in this topic
Download firmware from http://samsung-updates.com/device/?id=GT-P3113
You will have unrooted stock firmware after flash complete. And after that you install cwm and root just as you did with 4.0.3
One way is to just flash it in Odin.
I used this: http://forum.xda-developers.com/showthread.php?t=1645295
This seems to be a pretty foolproof "restock" method.
The only UNROOT method that worked for me!
kan_bleach said:
Dude how did you unroot???
Click to expand...
Click to collapse
The only METHOD that UNROOTED my Galaxy Tab 2 7.0 P3113 was the instructions at this web site :
http://www.androidauthority.com/galaxy-tab-2-7-0-p3113-root-clockworkmod-recovery-96474/
It's a 2 step process. I tried several other places that had similar instructions BUT this one worked. You have to download several files and the recovery rom file has 2 different versions and you choose the one that is appropriate for your situation. I was NOT sure which was appropriate so I tried both and it finally worked.
And it DOES unroot it.
And later that night JUST after midnight I was AGAIN notified on my GT2 7 that I had an update. This time it downloaded the 200+ mb file and rebooted and came up and installed it perfectly!
And every thing is working well now and I am on 4.04. It is SO much smoother than 4.03. A real keeper until Jelly Bean comes available.
----grobin
Ha ha well I should have read this thread before I did a factory reset and installed kies on like 5 computers. Come on samsung.
barmalei7 said:
You don't need to unroot, just flash 4.0.4 firmware with odin as i described in this topic
Download firmware from http://samsung-updates.com/device/?id=GT-P3113
You will have unrooted stock firmware after flash complete. And after that you install cwm and root just as you did with 4.0.3
Click to expand...
Click to collapse
The samsung-updates.com link does not work.
Please give link to any working GT-P3113 firmware download please.
Hi,
I have Samsung Tab 2 7" P3100
Originally had 4.0.4 which worked great.
But got OTA update n upgraded to 4.1.1
& Now it started giving me trouble, Wifi Connection is very unstable.
Connected to Wifi Network keeps popping up every 5 mins.
I cant even install things properly without worrying of it will fail or success.
so i rooted the device and reset the whole thing (Rooted to make a Titatnium Backup n all)
Problem still persists, Still the Wifi Trouble.
Without a Proper Wifi its not even worth having a Tablet.
So my Question is: Can i Push a 4.1.1 ROM from Sammobile on my current 4.1.1 ??
or should i just downgrade it to 4.0.4 & than do a upgrade via Kies rather than OTA update.
( I am thinking something in OTA messed up, so a proper ROM from sammobile might help)
nosdam7 said:
Hi,
I have Samsung Tab 2 7" P3100
Originally had 4.0.4 which worked great.
But got OTA update n upgraded to 4.1.1
& Now it started giving me trouble, Wifi Connection is very unstable.
Connected to Wifi Network keeps popping up every 5 mins.
I cant even install things properly without worrying of it will fail or success.
so i rooted the device and reset the whole thing (Rooted to make a Titatnium Backup n all)
Problem still persists, Still the Wifi Trouble.
Without a Proper Wifi its not even worth having a Tablet.
So my Question is: Can i Push a 4.1.1 ROM from Sammobile on my current 4.1.1 ??
or should i just downgrade it to 4.0.4 & than do a upgrade via Kies rather than OTA update.
( I am thinking something in OTA messed up, so a proper ROM from sammobile might help)
Click to expand...
Click to collapse
Yes, you can trying to download them from sammobile.com and start to installing from odin. Make sure you have backup for your ICS 4.0.4 before replace with JB 4.1.1
Good luck..
rom
what is the best rom?
Guys,
Incredible thing has happened, my GT 7.7 told me today: you have new firmware available to download !! First time in its freakin' life it told me that OTA update is available. What's more - it's JB - when almost everybody lost their hope to see it on 7.7.
My happiness didn't last long. OTA upgrade downloaded and after reboot - showed Android system update icon ... for 10 sec. Then it rebooted again. When system boot up - i found no change to 7.7 FW. When i tried to force another attempt to update - i got error message telling me "Update has failed... bla bla bla. Try using Kies".
OK - let it be. I started Kies. Installed update it prompted me and ... found message "Your device’s current firmware version is not supported via Kies". Great !!
My 7.7 is rooted (4.0.4), de-bloated (a lot of junk is gone (including stuff like Samsung Account and other Samsung bloatware).
Now question: If I flash new FW via Odin - will this flash clear my whole 7.7 or my existing apps and data will remain intact?
I think data/aps should "survive" Odin flashing (I don't remember what i did when i upgraded to ICS but i think I flashed with Odin and everything survived).
Another thing - do you think ti's better to wait for Kies upgrade that will support my 7.7 FW upgrade or heat up Odin and forceburn JB into it.
Thanks for advice (in advance).
kies wont upgrade root device with custom recovery... so i say go odin way...
I have a Galaxy 7.7 6810 (originally purchased from Hong Kong) and a few weeks ago, I tried to go from ICS 4.0.3 to Jellybean using OTA. Unfortunately, I had forgotten that I was rooted and the OTA would not install. I then tried using Odin to flash Bodivas 4.1.2 and totally screwed up. Odin would not complete the installation - stuck somewhere in the process and I couldn't figure out how to safely get out. Soft brick! I finally (several days later) managed to get back to stock 3.2 using Odin 3 version 1.85. I ended up with build "HTJ85B P6810XXLB4, which seems to work just fine, but now I would like to get back up to JB. I was hoping that I could do OTA, as I'm not rooted right now, but I can't get past the registration page from Samsung. It asks for my country and by now I've tried many of the countries on the list and always get the message "Registration failed." The problem must be due to my build version.
Any suggestions for what I need to do in order to get Samsung to recognize my 6810 so that I can get the OTA update? I'm reluctant to try Odin again because of what happened last time, although I guess I can root and then try Mobile Odin this time around.
Sorry this is so long.
I was able to install the first of the two updates earlier for the 5.1.1 update on my Verizon Galaxy Note Pro 12.2. The second downloads, prompts for install, reboots and begins installing but errors out and reboots back into the OS home screen. The Verizon software update manager shows Failed software update error code 402. I have factory reset my tablet a couple of times and still same issue. I do not have my tablet rooted and no apps disabled.
I downloaded the latest available Samsung firmware md5 file, version VZW-P905VVRUANK1-20141205133604 and tried flashing using Odin 3.07 while in download mode. It starts and after a few seconds, Odin fails and on the tablet screen, I get the error, SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1. I have re-downloaded the firmware along with older versions and still same issue.
I was reading somewhere that my tablet could be "soft bricked" and that is why it will not install the second part of the OTA. As for the Odin/download mode error, I had read that the firmware version I am trying to flash in Odin has an older version of bootloader than my current and Samsung does not let you downgrade the bootloader. I may be wrong on both accounts, which is why I am seeing if anyone else has had this same issue or have any advice on what I can try.
Thanks in advance!
Same here. I unforze all the apps unintstalled SU and factory reset still no dice. VZW repair assistant wont work or smart switch. RA says device firmware not supported and smart switch says im up to date. The first part of the update installed no problem.
dansto82 said:
Same here. I unforze all the apps unintstalled SU and factory reset still no dice. VZW repair assistant wont work or smart switch. RA says device firmware not supported and smart switch says im up to date. The first part of the update installed no problem.
Click to expand...
Click to collapse
I had the exact same issues. Here's what I did with my 4.4.2 Rooted NP. I wiped it completely from within the device, then connected it and to the VZW software and let it do a "Repair". After that, my tablet also said that it was up to date, still on 4.4.2. I let it sit overnight and tried downloading the software update the next morning from the tablet, and it took both of them. My NP is rocking 5.1.1. now, much faster. No root but that's alright for now. By running the repair assistant from VZW, it also got rid of the Unlocked Symbol, which may have prevented the upgrade in the first place.
tdetroit said:
I had the exact same issues. Here's what I did with my 4.4.2 Rooted NP. I wiped it completely from within the device, then connected it and to the VZW software and let it do a "Repair". After that, my tablet also said that it was up to date, still on 4.4.2. I let it sit overnight and tried downloading the software update the next morning from the tablet, and it took both of them. My NP is rocking 5.1.1. now, much faster. No root but that's alright for now. By running the repair assistant from VZW, it also got rid of the Unlocked Symbol, which may have prevented the upgrade in the first place.
Click to expand...
Click to collapse
I was able to get mine to update using ODIN and the firmware file from sammoble. Factory reset on the tablet, factory reset in recovery and finally ODIN worked.
I was having the same problems as the OP listed. Once I decided to live without root and I would be okay with wiping the tablet, I performed exactly what dansto82 said he did and I'm now on 5.1.1.
Now hoping someone comes up with a way to root.
Hey, I have the p905v and it is running 4.4.4, I rooted it with towelroot and it was completely fine. I then tried putting twrp recovery on it the wrong way through flashify and now I don't have a recovery mode and can't update it to 5.1.1. Other than that the tablet runs perfectly fine. Is there a way I can fix it?
Sent from my SM-P905V using XDA Free mobile app