Database Info

[Q] Bricked new phone need help

i recently bought a samsung galaxy s 4g, and i used odin and flashed a sidekick (my brothers phone) rom on accident.
cant get to the download mode
cant get to the recovery
cant power on the phone
it hasnt yet been 30 days since ive had the phone, so could i take it back to the store and just say its not turning on can i get an exchange?

Yeah just say it wont turn on
Sent from my SGH-T959V using XDA App

Or you could follow the directions posted in this link to unbrick, as posted by Jager in the General SGS4G forum.

That method worked for me but its cause I flashed the correct phone deivce rom he didnt
Sent from my SGH-T959V using XDA App

It still may work.
Sent from my SGH-T959V using XDA Premium App

It happens to me all the time. Just plug phone to computer holding volume up and down at same time. It shows the phone-cable-pc thingy and that's download mode. I went into that when I failed to Odin by mistake and just decided to try to Odin while in that "mode" and it did flashed. Hope this helped.
*Have Odin open before you plug cuz' that way you know it found the device.
*I think this method shown on Rootzwiki I discovered first but never posted. It happened while flashing 1st Audiophile. LOL... anyway, w/e. Good luck!

cj_31 said:
It happens to me all the time. Just plug phone to computer holding volume up and down at same time. It shows the phone-cable-pc thingy and that's download mode. I went into that when I failed to Odin by mistake and just decided to try to Odin while in that "mode" and it did flashed. Hope this helped.
*Have Odin open before you plug cuz' that way you know it found the device.
Click to expand...
Click to collapse
Try this even if the screen stays black/off, as long as Odin recognizes it (You'll get the yellow box with COM# in it) these steps will help.

[Q]how to get into Download mode after soft bricking S2 LTE (ROGERS)

Hi folks,
I've been trying to install custom Rom using Odin to support a language which is not supported with android gingerbread 2.3.5! and it failed after boot.bin...Now, I'm stuck in the Phone---!---PC screen.
I am trying to get into download mode to be able to return to stock using this
Return to stock, fix soft brick :: 11/13: Rogers TAR!
my question: Could I flash while am on "Phone---!---Pc" screen?how can I get rid of "Phone---!---Pc" screen? or should I get USB jig to force into download mode? is it the best solution to restore to stock?
any help would be greatly appreciated !

If you cant get into download mode u need a jig order this http://forum.xda-developers.com/showthread.php?t=954458

SII_LTE_User said:
Hi folks,
I've been trying to install custom Rom using Odin to support a language which is not supported with android gingerbread 2.3.5! and it failed after boot.bin...Now, I'm stuck in the Phone---!---PC screen.
I am trying to get into download mode to be able to return to stock using this
Return to stock, fix soft brick :: 11/13: Rogers TAR!
my question: Could I flash while am on "Phone---!---Pc" screen?how can I get rid of "Phone---!---Pc" screen? or should I get USB jig to force into download mode? is it the best solution to restore to stock?
any help would be greatly appreciated !
Click to expand...
Click to collapse
Even if your phone is shown the "Phone---!---PC" screen .. ODIN should still recognize it being attached to your computer .. My first SGS2 Skyrocket did this in which I was able to reflash back to stock using ODIN v1.85 .. however, my first SGS2 took a real crapper for some reason .. that even the USB JIG was unable to get the phone into Download Mode.
I now have a replacement in which I'm being REAL careful with .. LOL

LordGeek said:
Even if your phone is shown the "Phone---!---PC" screen .. ODIN should still recognize it being attached to your computer .. My first SGS2 Skyrocket did this in which I was able to reflash back to stock using ODIN v1.85 .. however, my first SGS2 took a real crapper for some reason .. that even the USB JIG was unable to get the phone into Download Mode.
I now have a replacement in which I'm being REAL careful with .. LOL
Click to expand...
Click to collapse
Actually Odin is recognizing the phone..but im not sure if flashing will work since its not in download mode!!! dont wanna go further doing wrong steps!

SII_LTE_User said:
Actually Odin is recognizing the phone..but im not sure if flashing will work since its not in download mode!!! dont wanna go further doing wrong steps!
Click to expand...
Click to collapse
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.

LordGeek said:
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
Click to expand...
Click to collapse
This will work.......DOOOO IT
Sent from my SAMSUNG-SGH-I727 using xda premium

You should be able to get into download mode by just holding volume down you may need to push the power button while holding it
Sent from my SGH-I727R using XDA App

LordGeek said:
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
Click to expand...
Click to collapse
the2rrell said:
This will work.......DOOOO IT
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks ALOT...You guyz Rock....I flashed and it's baaaack up and running without even losing my data
So for those who are stuck in same scenario...
YES you can flash with ODIN if you're stuck in Phone--!--PC...I used Return to stock, fix soft brick :: 11/13: Rogers TAR!
-Downloaded I727R tar
-opened Odin v1.85
-turned on my phone(showed the exclamation mark screen)
-Connected to Pc with Usb
-odin recognized it...put .tar file in PDA and hit Start et Voila!
Hope this helps anyone in same situation!

Help
I have tried to root my phone and I can't get it to get past the boot screen. I can get it to the download screen but I cant get anywhere past that...please help. I need step by step instructions please.

Go here it has the step by step instructions. http://forum.xda-developers.com/showthread.php?t=1342348

Okay so I am having a similar problem. My phone will boot up and it says the "downloading a different os .... and then press volume up to continue and volume down to reboot" and when i press volume up i get a screen saying "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". What do i do? Please and thanks

Do you have usb Jig. If no than you can make ur own. Let me find you solution to ur problem. And if you have any other device that uses micro usb than try plugging the usb cable to ur phone and see if thats gets u in dload mode.
ckck543 said:
Okay so I am having a similar problem. My phone will boot up and it says the "downloading a different os .... and then press volume up to continue and volume down to reboot" and when i press volume up i get a screen saying "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". What do i do? Please and thanks
Click to expand...
Click to collapse

Morning y'all... having a similar problem... I was rooted but for some reason when in Recovery I'd only get Android Recovery??? I got CWM installed using ODIN (This is the tread I used... http://forum.xda-developers.com/showthread.php?t=1340526) . Then I went and tried to install miuiscotland_I9100-2.1.13... said install was complete... went to reboot from CWN... and nothing.
I tried pulling battery, going into recovery, download mode, the jig... and nothing... doesn't even look like it's charging... no spark at all?
So I have no phone as it stands right now.
Any comments, suggestions, hints, tips, tricks?
Thx.
B.
Rogers
Galaxy S II LTE
SGH-I727R
Kernel V: 2.6.35.11

I see that instructions are step by step but I have a phone that wont let me put it in download mode. My phone wont hookup to my computer. I need help....
---------- Post added at 10:05 AM ---------- Previous post was at 09:51 AM ----------
I see that instructions are step by step but I have a phone that wont let me put it in download mode. My phone wont hookup to my computer. I need help....

K9kazoo said:
Morning y'all... having a similar problem... I was rooted but for some reason when in Recovery I'd only get Android Recovery??? I got CWM installed using ODIN (This is the tread I used... http://forum.xda-developers.com/showthread.php?t=1340526) . Then I went and tried to install miuiscotland_I9100-2.1.13... said install was complete... went to reboot from CWN... and nothing.
I tried pulling battery, going into recovery, download mode, the jig... and nothing... doesn't even look like it's charging... no spark at all?
So I have no phone as it stands right now.
Any comments, suggestions, hints, tips, tricks?
Thx.
B.
Rogers
Galaxy S II LTE
SGH-I727R
Kernel V: 2.6.35.11
Click to expand...
Click to collapse
You are hard bricked. You flashed a i9100 rom over a i727 device.
Only advice I can give is drop it in the toilet if you have insurance on the phone and get a replacement, or call your carrier's warranty department and tell them your phone just stopped working (not particularly ethical and you could get caught if they figure out it was rooted, but worth a shot...).
Oh, and the other advice is NEVER flash roms meant for devices other than the Skyrocket. Roms meant for the original S2 will brick your phone.
---------- Post added at 09:55 PM ---------- Previous post was at 09:51 PM ----------
appdroid said:
Do you have usb Jig. If no than you can make ur own. Let me find you solution to ur problem. And if you have any other device that uses micro usb than try plugging the usb cable to ur phone and see if thats gets u in dload mode.
Click to expand...
Click to collapse
No need for a jig here (though it is good to have one anyways). If you get the "firmware upgrade failed" screen, just plug the phone in and if Odin sees your phone you can flash the stock tar. The "failed" screen won't look like it's doing anything but after Odin finishes you will be back to stock and life will be good again.

Help, my phone is not booting. only showing light on the button.

Please help me. My Infuse 4G doesn't boot. All I see was light on the button. This what happened. I want to go back to stock and use [ODIN][UCKE3] Return to stock (Updated 06/08/11) by gtg465x . I right click on Odin and run as Admin. Odin see my phone on a download mode. I select infuse.pit on PIT, PDA in Pda, and Phone in Phone. then click Start. It got stuck at factory.fs (don't remember the name actual name). It stuck there for so long, maybe like an hour. Then I decide to unplug and pull battery out. close the Odin and redo the step again. This time the status bar went half way and then got stuck again. I left it overnight just to see if it's actually finish and it never did. Just stuck there. Turn the phone on and i only see light on the button. Is my phone dead? I can still able to get to download mode but the phone won't boot.
I done return to stock so many times and was successful. This was the first encounter I had where Odin stuck and never complete it flashing.

Try things like reinstalling the drivers, another pc, another usb cable etc.

Thanks. Will try that and also i will try this [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) since on FAQ #4 seem to be in my case. But if members had other recommendation, please post. thx in advance

cat2115 said:
Thanks. Will try that and also i will try this [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) since on FAQ #4 seem to be in my case. But if members had other recommendation, please post. thx in advance
Click to expand...
Click to collapse
Getting stuck on the factory.fs is pretty common here. You might try charging for a bit to see if you can get it to show signs of life. And that link up there^^^(UCKD5 Stock+Root+3e) has worked for me when gtg's didn't. Read the instructions for it carefully as you don't have to check as many boxes. You only need to load the file into the PDA slot. Also if you didn't have the drivers installed your phone wouldn't show up, so that's not your problem (although you could try re-installing them for **** and giggles)...
If THAT doesn't work try Adam's Heimdall one click HERE

If all else fails try a different PC. I had to and it worked like a charm.
Good Luck
Just my 2¢
Sent from my SAMSUNG-SGH-I997 using XDA App

I had a similar problem last week I tried on my dads computer, nothing, then went to my computer since my computer had the drivers already on it cuz I used it to put music on my sd card it read it fine and they process went smoothly, so try on a computer that had had it
plugged it in before the problem and if it doesn't find threw phone restart they computer and re put the phone in download mode and try again and keep doing that till it recognizes the phone and it should work then
Sent from my SAMSUNG-SGH-I997 using xda premium

Some times just trying a different USB port on the same computer will help to. Not sure why but on my laptop the USB port on the right my Captivate did not like for flashing but the one on the left side always worked right.

Thank you all for helping me out. My infuse is now back in business. I use [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) but this one got my phone to always boot in recovery mode no matter what i did. So i decide to try Heimdall One-Click Back-To-Stock UCKJ4 + Easy CWM install [2.3.6] (FOR AT&T USERS) and then flash LinuxBozo's Defuse 1.5 kernel. Successfully flash it . However after using Heimdall One-Click, ODIN did not see my phone when it's in download mode. Besides that, everything went well.

cat2115 said:
Please help me. My Infuse 4G doesn't boot. All I see was light on the button. This what happened. I want to go back to stock and use [ODIN][UCKE3] Return to stock (Updated 06/08/11) by gtg465x . I right click on Odin and run as Admin. Odin see my phone on a download mode. I select infuse.pit on PIT, PDA in Pda, and Phone in Phone. then click Start. It got stuck at factory.fs (don't remember the name actual name). It stuck there for so long, maybe like an hour. Then I decide to unplug and pull battery out. close the Odin and redo the step again. This time the status bar went half way and then got stuck again. I left it overnight just to see if it's actually finish and it never did. Just stuck there. Turn the phone on and i only see light on the button. Is my phone dead? I can still able to get to download mode but the phone won't boot.
I done return to stock so many times and was successful. This was the first encounter I had where Odin stuck and never complete it flashing.
Click to expand...
Click to collapse
I was stuck in Samsung logo. And cannot get into the Download mode. Could you help me with that? Or anyone?

pkayrat said:
I was stuck in Samsung logo. And cannot get into the Download mode. Could you help me with that? Or anyone?
Click to expand...
Click to collapse
What have you tried so far to get in to Download mode?
Sent from my SAMSUNG-SGH-I997 using XDA App

Q bricked my phone, no download mode, windows vista not recognizing phone

Ok so made a big mistake and tried flashing back to a Gingerbread Rom after being on a Jellybean Rom. I know dumb. Now my phone is stuck on the samsung logo. I can't reach download mode or Recovery. On top of that my computer will not recognize my device. I'm hoping to fix this soon as possibe! Any help would be much appreciated!

jmoney860 said:
Ok so made a big mistake and tried flashing back to a Gingerbread Rom after being on a Jellybean Rom. I know dumb. Now my phone is stuck on the samsung logo. I can't reach download mode or Recovery. On top of that my computer will not recognize my device. I'm hoping to fix this soon as possibe! Any help would be much appreciated!
Click to expand...
Click to collapse
Look for Heimdall suite and follow the instructions in the read me to reinstall the driver. Then use a heimdall one-click restore image. That should fix it.

You should be able to enter download mode no matter how messed up your phone may be..
Remove battery and place back in.
Hold both vol+ & vol- and plug in the usb already inserted to the pc.
Sent from my sweet & buttery Infuse

rev3la7ion said:
Look for Heimdall suite and follow the instructions in the read me to reinstall the driver. Then use a heimdall one-click restore image. That should fix it.
Click to expand...
Click to collapse
andros11 said:
You should be able to enter download mode no matter how messed up your phone may be..
Remove battery and place back in.
Hold both vol+ & vol- and plug in the usb already inserted to the pc.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
Any ideas where to find those reinstall driver instructions? The main heimdall post in the infuse community does not have any instructions regarding re downloading drivers I believe. And no there is no download mode. I don't know how that is possible but it is. Download mode is not working on my phone.

I would also like to know the outcome of this, my phone also lost download mode. I'm not sure what happened, I was on the web and it just shut itself off and decided to bootloop itself.

I am almost 100% sure you can't lose download mode.
Sent from my SGH-I997 using xda app-developers app

If your battery super dies it can be hard to get into download mode.
Sent from my SGH-I997 using xda premium

I had the same prob thought it was no download mode also but what fixed my problem was a restart of computer for the driver installation to complete .did you do that after installing the drivers?
Sent from my SGH-I997 using Xparent SkyBlue Tapatalk 2

My friend is unable to get his phone into download mode. His phone loops constantly from the Samsung screen to the CM screen and then back to the Samsung screen.
Pulling the battery and holding down the volume buttons does nothing. Connecting it via USB just brings up the battery screen, but that loops as well (shows the 'thinking' icon then the battery screen). Odin does not recognize it, not sure if he's tried Heimdall yet. But even if he can get that to recognize it, will it do him any good if the phone is constantly cycling power?

As others above have stated, it is not likely you have lost download mode, most likely not performing all of the correct steps. If you do the steps properly and there is no download mode you will need to buy a jig ($2.) , can be found on Amazon.
Once you can achieve download mode, follow qkster's Heimdall instructions, post 1 will get you back to stock GB, and post 2 will get root access again. If you have Kies installed, uninstall it before doing anything else as it is a source of issues.
Note that you must have the latest version of Java. Also, use the same usb port on your computer each time you run Heimdall, be sure that it is a properly operating usb port as well.
Many thanks to qkster for the guide and Entropy for the kernel.
http://forum.xda-developers.com/showthread.php?t=1524081

as Pony stated. The other reason we've been seeing the constant power loop is due to a stuck power button. You may need to take it apart and clean the power button.
Look thru the q/a threads...lately, the power button thing has been pretty common

andros11 said:
You should be able to enter download mode no matter how messed up your phone may be..
Remove battery and place back in.
Hold both vol+ & vol- and plug in the usb already inserted to the pc.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
Agreed! I've borked mine something awful before (namely, being careless and trying to go back to GB from JB) and losing IMEI, no recovery, etc. and could still get DL mode. I too had issues with Heimdall, albeit different, but if you use the same usb port (pull batt, plug usb in, hold vol. up/down....then put batt. in and continue to hold until DL mode)....go to control panel/system/device manager and find USB/samsung composite device, right click and update drivers. This is if Heimdall isn't working for you, use Odin v3 and flash GTG's back to stock. It will take you back to froyo unrooted. If Heimdall is working, like others have stated....be sure to have the latest java installed.
edit: If you can use Heimdall, it will prompt you to install correct drivers once you start the program.

qkster said:
as Pony stated. The other reason we've been seeing the constant power loop is due to a stuck power button. You may need to take it apart and clean the power button.
Look thru the q/a threads...lately, the power button thing has been pretty common
Click to expand...
Click to collapse
Thanks guys for the quick replies (that I just now saw, lol... whoops!). His power button is actually broken on the board itself. He's made his own jig and gets it to boot up, but the phone itself is pretty much done as he's not able to do anything without the power button. He's looking at picking up a SII probably. Appreciate all the help though! :good:

Chris Hansen said:
Thanks guys for the quick replies (that I just now saw, lol... whoops!). His power button is actually broken on the board itself. He's made his own jig and gets it to boot up, but the phone itself is pretty much done as he's not able to do anything without the power button. He's looking at picking up a SII probably. Appreciate all the help though! :good:
Click to expand...
Click to collapse
Even with the pwer button broken, if the screen is still intact, a new replacement screen is closer to $135+.
He may be able to sell that screen pretty quickly for $75-$100.

His screen is trashed too, so he's pretty far up the creek without a paddle.
He's trying to sell it on eBay for parts currently. We'll see how that pans out.

[Q] Samsung Infuse 4g Stuck in Bootloop after Root

I updated the phones ROM and rooted it perfectly. In the process of the newest rom update, while in Clockword recovery mode - wipe data was accidentally selected, in the middle of the data wipe I tried to save the phone by removing battery. Now its stuck in bootloop, Recovery mode doesn't even come up, but I succeeded in getting the phone into Download Mode, but it has the Triangle up with CUSTOM BINARY DOWNLOAD: YES(2 COUNTS) and CURRENT BINARY :CUSTOM. I have used Odin to try to install the Stock Att version, still no luck. as of now the phone is bricked, and can only get it into download mode. Can somebody please help? Ill die if I can't fix this phone, and Just so you know, I don't have a USB jig to delete the custom binary files. Is that the only way I can get the phone to actually turn on and function? Help plz Im freakin here...

Sassy.Rainbow.Bong said:
I updated the phones ROM and rooted it perfectly. In the process of the newest rom update, while in Clockword recovery mode - wipe data was accidentally selected, in the middle of the data wipe I tried to save the phone by removing battery. Now its stuck in bootloop, Recovery mode doesn't even come up, but I succeeded in getting the phone into Download Mode, but it has the Triangle up with CUSTOM BINARY DOWNLOAD: YES(2 COUNTS) and CURRENT BINARY :CUSTOM. I have used Odin to try to install the Stock Att version, still no luck. as of now the phone is bricked, and can only get it into download mode. Can somebody please help? Ill die if I can't fix this phone, and Just so you know, I don't have a USB jig to delete the custom binary files. Is that the only way I can get the phone to actually turn on and function? Help plz Im freakin here...
Click to expand...
Click to collapse
After flashing to factory rom I get this error message: E:failed to mount /dbdata (File exists)
E:copy_dbdata_media:Can't mount /dbdata your storage not prepared yet, please use UI menu for forma and reboot actions.

Try using heimdall, go to download mode with that triangle.
here is op:
http://forum.xda-developers.com/showthread.php?p=23118134
Here is my upload if u want them:
http://d-h.st/users/bradman117/?fld_id=17853#files
if u don't now what to download here's my 2 links, using heimdall flash stock then flash kernel.
The kernel will give u root and recovery (faster way of rooting )
Sent from my Galaxy Nexus using xda premium

bradman117 said:
Try using heimdall, go to download mode with that triangle.
here is op:
http://forum.xda-developers.com/showthread.php?p=23118134
Here is my upload if u want them:
http://d-h.st/users/bradman117/?fld_id=17853#files
if u don't now what to download here's my 2 links, using heimdall flash stock then flash kernel.
The kernel will give u root and recovery (faster way of rooting )
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank you so much, my phone is working now. I just have to find a way to reset the binary download count(get rid of the yellow triangle) without purchasing a USB jig. Any suggestions? Im trying to update firmware to ICS and then Jelly bean. I tried flashing it to a newer version(ics), but then the phone goes back into bootloop (i think bc of flashing it to ics, then jelly bean, and then back to a rooted stock verison), so I have to keep using the rooted stock firmware. Any suggestions? Thank you btw

Sassy.Rainbow.Bong said:
Thank you so much, my phone is working now. I just have to find a way to reset the binary download count(get rid of the yellow triangle) without purchasing a USB jig. Any suggestions? Im trying to update firmware to ICS and then Jelly bean. I tried flashing it to a newer version(ics), but then the phone goes back into bootloop (i think bc of flashing it to ics, then jelly bean, and then back to a rooted stock verison), so I have to keep using the rooted stock firmware. Any suggestions? Thank you btw
Click to expand...
Click to collapse
Getting to download mode is all the USB jig does. U can get it with out one. I believe if u hold down volume and plug in cable. Its something like that I forget. And a return to stock using heimdall or Odin should fix anything
Sent from my Galaxy Nexus using xda premium

im having troubles too!!
i have a similar problem myself. I rooted my infuse it has cwm9 and ics. but for some reason the phone cuts off and starts boot looping. i cant get it in download mode or recovery. took the battery out put it back in and its starts doing it without touching the power button. ive beat and banged on it still nothing but the loop. this is the longest it has done it, usually it would quit after a few minutes but its going on 24 hours now. any help would be awesome!!!

Try holding the volume up and the volume down (but not the power button) with the USB plug already in the phone and hooked up to the computer and then insert the battery. If you don't get into download then you either need a jig or have a power button problem.
Sent from my SGH-I997 using xda premium

psal217050 said:
Try holding the volume up and the volume down (but not the power button) with the USB plug already in the phone and hooked up to the computer and then insert the battery. If you don't get into download then you either need a jig or have a power button problem.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
i tried the method you just described and its a no go. where do i get a jig? i didnt have this issue till after i rooted and updated so i wanna rule out power button at the moment and try the jig

Ebay is where I got one.
Sent from my SGH-I997 using xda premium

Can get into download mode,
I am able to get into download mode, Ive flashed the OS a number of times back to stalk, then tried ICS, and jelly bean, and I still get the same error message I got at the beginning of this post. But I was able to reset the Binary counter, if I could get my phone to work again I would literally pay somebody to help me....I know it is possible to get it back up and running, it's just a complicated process it seems. Help please!

Chainfire had a program called Triangle Away. Do a search but be careful, it might not work with Infuse and you could get a real brick.
Sent from my SGH-I997 using xda premium

i have bricked my infuse many times, and xda members always have been helpful to me
i am now that the point of believing that my infuse is un-brick-able, so I am writing down my instruction as a noob for you
A/ Preparation in your computer:
1. Install/Update Java (http://java.com/en/download/index.jsp) and Get the driver for the Samsung ready (download and install Kies software at http://www.samsung.com/us/support/owners/product/SGH-I997ZKAATT)
2. download Heimdall One-Click Back-To-Stock UCKJ4 + Easy CWM install at http://forum.xda-developers.com/showthread.php?t=1331381 (maybe put it right there in the desktop)
3. Download SGH_I997 Entropy 4_4_2012-One-Click-Heimdall.jar (maybe put it right there in the desktop)
4. Download: CM-9-20120620 from here http://forum.xda-developers.com/showthread.php?t=1601844
5. Download: CWM-community-kernel from here http://forum.xda-developers.com/showthread.php?t=1119598
6. Download a rom and gapps ( i use the AvatarROM and Gapps from here http://forum.xda-developers.com/showthread.php?t=2174227)
*connect your phone to the computer and copy and paste the 4, 5, 6 items into your sd card
* i am not so sure where you are at, but maybe you don't need flash the cm-9
what you need to do:
a. pull out the battery, put it back on, holding down both the volume buttons while plug in the use cord, the other end of the usb already plug in the computer, that would put you to the download mode
b. by now your computer would be noticing the phone is connected, you then click the Heimdall at 2 above to turn it on (read that thread so you can know what to expect) if you have the drive and the phone is really connected, then, you can click "flash" and the Heimdall will do it job - don't do anything the phone will be rebooting itself back to stock (in the thread, the dev. said you might need to flash two times, but in my case, I only did once and it worked right away)
c. be happy with result for a while, then you put the phone back to download mode and flash the Entropy Heimdall at 3 above, your phone will get the red recovery if things go the way it should
d. then you wipe everything (maybe no need but whatever... after bricking your phone, it doesn't hurt to spend a min. to do this), 2 wipes at the main red recovery and then go to advance and wipe advik catch and battery state .. i would do every wipe 2 times ... and also select the "fix permissions" in there too
e. then you flash the cwm community kernel at (5) assuming that you already put it in the sd card of your phone (if not, then you choose the option from the the red recovery "connect as usb drive, your computer wil read the phone and allow you to copy and paste - i must say here that I tried this step a few times in order to make it work, i even reboot my computer)
then you flash the ROM and Gapps that you want to (assuming that you already put them in the sd card of the phone)
if jellybean didn't go through then maybe you should try the cm-9 first ...
be patient, very patient if things to the way it should, your phone will reboot a few times and recovery will change its color ... and you will get to the ROM you want
while you are waiting for those reboots, take time to read at least the first 3 pages of the threads that I put the links above to learn about the problems and what to expect
don't panic very much it will led to bad decision
your phone will be fine as XDA dev. have spent a great deal of time, energy, thoughts on the infuse
once again, hope you understand my noob instruction and esl writing
you phone will be working again

Thanks but I didn't needed these. I may not be a pro but definitely not a noob. I was only responding to the previous comment.
Sent from my SGH-I997 using xda premium

opps, i didn't see that I accidentally quoted you
sorry

NP.
Sent from my SGH-I997 using xda premium