Database Info

i think i completely bricked it plz help

well i was using odin to flash and it said failed in red, then i tried again and odin acted like it started then no status bar on either my phone nor odin i waited... nothing so i waited more with no luck so i decided to try to reboot the phone and see where it left me. and it left me with phone..!..computer i tried to look around i saw something about a jig but im lost and scared is there anything i can do to fix it?

The good thing is, it's incredibly hard to truly brick the Captivate.
The bad thing is, I don't really have much of a solution for you at this time other than to try to 3-button it into Download Mode and THEN plug it into Odin. Beyond that, I don't know.

Wrong section
Which Odin
Can you still get into download mode?
What build is your phone
Sent from my Captivate using XDA Premium App

Pull battery, then put it back in. Hold down just the two volume buttons and connect the phone via USB to computer. The phone should automatically reboot into download mode.
Sent from my SAMSUNG-SGH-I897 using XDA App

This doesn't belong in the Dev section.
What you have a is a soft brick. Try Odin again following theses steps.
1. Right-click on the Odin exe in Windows Explorer on your computer and select "Run as administrator" and then click OK to any prompts.
2. Hold both volume buttons in while connecting the phone to your computer's USB port.
3. When Odin recognizes the phone it will show Download mode on the phone.
4. Click Start in Odin.

Or, ignore all this help, and build the 301k USB do-hicky. See a post by me about bricking my phone. I've been building and selling these things. It's the only thing that works 100% of the time.

http://www.mobiletechvideos.com buy a jig, problem solved.

Moved to general as not android dev.

timmy22 said:
Or, ignore all this help, and build the 301k USB do-hicky. See a post by me about bricking my phone. I've been building and selling these things. It's the only thing that works 100% of the time.
Click to expand...
Click to collapse
You don't need a jig for a soft brick.

Not sure if my phone is bricked or not

Basically when I boot my phone up, all it shows is an image of a phone, a sign with a ! in the middle, and the pic of a pc. Is there any possible way to fix this or do I have to send it back to tmobile? If it helps I dont think my phone is usb debugging mode either

You should be able to fix . try this.

I'm nit able to get my phone into download mode or recovery. Everytime I boot it up it shows the same screen I mentioned in the OP

A_Kuma said:
I'm nit able to get my phone into download mode or recovery. Everytime I boot it up it shows the same screen I mentioned in the OP
Click to expand...
Click to collapse
try turning fone off and taking out the battery.... then ensure your holding down volume up n down buttons while pluggin in usb.... and you get the fone into download mode.... hope that helps

A_Kuma said:
Basically when I boot my phone up, all it shows is an image of a phone, a sign with a ! in the middle, and the pic of a pc. Is there any possible way to fix this or do I have to send it back to tmobile? If it helps I dont think my phone is usb debugging mode either
Click to expand...
Click to collapse
Open Odin 1.7 on your computer and plug your USB into your PC. Now take out the battery and hold down volume keys while plugging in USB and putting battery in. Should bring you to download mode. Once in download mode download kd1 put it into PDA and go for it.
Note:it dosent have to show up in download mode to actually be in download mode. If it shows up a little yellow box means in your in download mode.
Best of Luck
Sent from my SGH-T959V using XDA Premium App

At the moment Odin doesn't recognize my device, nor does Heimdall. I do have the drivers installed though

A_Kuma said:
At the moment Odin doesn't recognize my device, nor does Heimdall. I do have the drivers installed though
Click to expand...
Click to collapse
where did u get ur drivers n did u run odin b4 u plugged in fone?

A_Kuma said:
At the moment Odin doesn't recognize my device, nor does Heimdall. I do have the drivers installed though
Click to expand...
Click to collapse
To be honest I think you might of needed USB debugging
Sent from my cellular device

I believe I have a similar issue, from Krylon's KD1 CWM, i Rezipped correctly, flashed, this this happened..
However, phone sits on Galaxy s4g boot up screen forever.. left it for 15 minutes now.
Also phone will no longer boot into CWM, looks like this may have bricked me.
Yes I did wipes, yes i followed the re-zip instructions correctly, yes I've flashed roms I know the drill.
Anyone know how to fix this? Or does this rom take forever on the first boot? 20+ minutes? doubt it...
And I cant boot back into CWM, Or stock recovery so i'm not sure how to fix this.
It literally either sits on the first Galaxy S 4g screen, or if i hold three button salute, it acts like it would normally boot into recovery, and cycles over and over with no recovery boot.
**UPDATE** Got mine fixed, odin+download mode

I got the drivers from this site and I had Odin running before I tried to put my phone into Download mode, Odin didn't not pick it up

So I got it figured out. You were right about using running Odin before hand, I just had to use a different usb cable. I brought my phone back. Thanks for all your help

[Q] Skyrocket phone stuck onSamsung Logo

Hi all,
My Samsung Galaxy phone is stuck on the Samsung boot up logo. I shut off the phone and it starts up again to the Samsung logo again. I am rooted but still had the stock rom and kernel.
I went to selections and wiped my cache and tried to format it like a new phone. The same thing still happens. I am not sure what else to do. Anyone know how to fix this?
Keep the instructions simple please, if you do know. (I'm a desperate noob)
Thanks for any help.

IF you ever did nandroid than just restore that otherwise.........
Hey first follow this steps to flash any rom. If you flash the rom properly than you can use any stock rom from dev section and use that.
OR
follow this step to go back to stock and it will unroot you.
Vman7765 said:
Hi all,
My Samsung Galaxy phone is stuck on the Samsung boot up logo. I shut off the phone and it starts up again to the Samsung logo again. I am rooted but still had the stock rom and kernel.
I went to selections and wiped my cache and tried to format it like a new phone. The same thing still happens. I am not sure what else to do. Anyone know how to fix this?
Keep the instructions simple please, if you do know. (I'm a desperate noob)
Thanks for any help.
Click to expand...
Click to collapse

Great, I'm downloading the drivers now. My phone was working perfectly. Do you know what may have caused this? Thanks.

I am not sure why it happened but it looks like u cleared cache so that might be the problem. IDK
Vman7765 said:
Great, I'm downloading the drivers now. My phone was working perfectly. Do you know what may have caused this? Thanks.
Click to expand...
Click to collapse
Rocketing on Sky Ics¡

I'm back up and running. If I want to change my rom and kernel, what do you recommend? I midas well do everything now, while I am on work mode. Thanks for your help.

first of all to show that you appreciate my help please hit that thnx button. I am running Sky Ice Rom which is deeply themed rom with faux123's kernel.
Vman7765 said:
I'm back up and running. If I want to change my rom and kernel, what do you recommend? I midas well do everything now, while I am on work mode. Thanks for your help.
Click to expand...
Click to collapse

NP thanks for your help. I spammed that button as much as I could lol.

Same Problem
My problem is that my Rogers SGSII LTE I727R, is stuck on the logo screen, which is flashing the boot screen. When I connect the USB (even after install of Kies and Odin), my PC does not see the device. I am really not sure what to do. I think I set the wrong phone ID when I installed recovery (I think I was supposed to use the T-Mobil SGSII setting), but I selected something else. I then tried to backup the existing ROM, and am now in this unending loop. Does anyone have any suggestions? Thanks.

Follow these steps it will help you go back to stock. ANd reroot your phone.
Barlaw604 said:
My problem is that my Rogers SGSII LTE I727R, is stuck on the logo screen, which is flashing the boot screen. When I connect the USB (even after install of Kies and Odin), my PC does not see the device. I am really not sure what to do. I think I set the wrong phone ID when I installed recovery (I think I was supposed to use the T-Mobil SGSII setting), but I selected something else. I then tried to backup the existing ROM, and am now in this unending loop. Does anyone have any suggestions? Thanks.
Click to expand...
Click to collapse

I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.

Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Try a different USB port. Avoid rear ports and hubs.

OK, i will try that on a different computer, as I have tried all of the available ports on my laptop. Any other thoughts?

Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Have you uninstalled kies? If not uninstall it from your PC. Put your phone in download mode and see if Odin can see the phone.
Sent from my SAMSUNG-SGH-I727 using xda premium

Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Try another USB port or another computer. If you can get the logo you are in a boot loop, the most common form of a soft brick. If you can get into download mode you should be able to fix it.
---------- Post added at 04:55 PM ---------- Previous post was at 04:46 PM ----------
Barlaw604 said:
OK, i will try that on a different computer, as I have tried all of the available ports on my laptop. Any other thoughts?
Click to expand...
Click to collapse
Just saw this. Have you tried to re-install the drivers?
Another thought is to try turning off firewall and antivirus when using Odin. I've never had my firewall or antivirus block Odin but I've heard it can happen...

Can you get into download mode? Hold the two volume buttons down, then plug the usb cable into your phone, then you should be in download mode.

I cannot get into download mode. I just keep getting the flashing boot screen, with the corresponding vibration.

mimart7 said:
Can you get into download mode? Hold the two volume buttons down, then plug the usb cable into your phone, then you should be in download mode.
Click to expand...
Click to collapse
What he said. Pull the battery and put it back in. Hold volume up/down and plug in USB. Continue holding volume buttons until you see download mode. Careful not to press the power button during this process.
Sent from my SAMSUNG-SGH-I727 using xda premium

I like how u guys are really trying to help him. Let u guys know that on my first responce I gave him all the steps on how to go back to stock. So if he followed that and nothing happened than he should try USB jig if that don't work than its hard brick!!
Rocketing on Sky Ics¡

Barlaw604 said:
I cannot get into download mode. I just keep getting the flashing boot screen, with the corresponding vibration.
Click to expand...
Click to collapse
Don't panic. If you're in a boot loop it's fixable. It's when you get nothing that you need to worry about a hard brick.
Try the button combo mentioned above to get into download mode. If that doesn't work, pull the battery again and try using just the volume down button button--I've heard people say this worked for them when they had a hard time.
If this doesn't get you into download mode, I guarantee you that a jig will work. You can buy one online or make one yourself for about 75 cents and a cut-up data cable (I had a car charger that I didn't need--car charges the phone through USB port, so I cut that one up). Always good to have a jig, at any rate...

skrambled said:
Don't panic. If you're in a boot loop it's fixable. It's when you get nothing that you need to worry about a hard brick.
Try the button combo mentioned above to get into download mode. If that doesn't work, pull the battery again and try using just the volume down button button--I've heard people say this worked for them when they had a hard time.
If this doesn't get you into download mode, I guarantee you that a jig will work. You can buy one online or make one yourself for about 75 cents and a cut-up data cable (I had a car charger that I didn't need--car charges the phone through USB port, so I cut that one up). Always good to have a jig, at any rate...
Click to expand...
Click to collapse
Yup, when I rooted my phone, the only way I could get it into download was volume DOWN & power.
Sent from my SGH-I727R using xda premium

[Q] Bootloop on Samsung Logo + No Download Mode

Hey community.
Long time lurker, first time poster.
Anyhow, my brother bricked his infuse last night. Apparently he tried to flash an incompatible cwm fw (Nexus S) and rebooted it, and now its stuck at the samsung logo. Secondly, i tried to push it into download mode and it continues to loop. I tried to connect it to Odin and it does not recongize the phone, however it freezes at a picture of a wheel (similar to windows hourglass) and doesnt move from there.
i'm assuming its perm bricked at this point, unless you have suggestions.
Others have mentioned "jig" and "unbrickable mod" although I could not find any details further than the terms.
Any help would be appreciated.

Just checking, have you tried this?:
Remove the battery, and disconnect USB.
Hold, and continue to hold both volume keys.
Continue to hold vol. keys, connect USB.
Insert battery and continue to hold vol. keys for awhile.
That should put you in download mode.
Sent from my SGH-I997 using Tapatalk 2

After retrying with 4 different cables, 3 different machines, and 2 different O.S. I finally got the infuse to be found by odin.
Thanks for all the help

BaconTelevision said:
After retrying with 4 different cables, 3 different machines, and 2 different O.S. I finally got the infuse to be found by odin.
Thanks for all the help
Click to expand...
Click to collapse
Lol next time try heimdale. It for me anyways works first try all the time. I only use Odin when i have to, other then that i always use heimdale. Make sure when you use heimdale plug your phone into another port. Ive figured out that a usb port only recognizes the phone a certain way, as heimdale uses different drivers that you install. On my laptop i have two ports that i do not usually use (one is dedicated to a bluetooth dongle/mouse) so one is set up for odin, the other for heimdale.

Yeah heimdall is the way to go...don't even need drivers...it uses its own special drivers that it will download for you if you don't already have them
Heimdall never fails me...but Odin...well Odin is kinda iffy
Sent from my SGH-I997 using XDA

Heimdall unbricked me twice
Sent from my SAMSUNG-SGH-I997 using XDA

How ?
10 Ch.

rkkaranrk said:
How ?
10 Ch.
Click to expand...
Click to collapse
How....what do you mean how?

rkkaranrk said:
How ?
10 Ch.
Click to expand...
Click to collapse
You talking to me?
Sent from my SAMSUNG-SGH-I997 using XDA

Oppps i am sorry guys i was posting this somewhere else.

rkkaranrk said:
Oppps i am sorry guys i was posting this somewhere else.
Click to expand...
Click to collapse
Lol that's alright.
Sent from my SAMSUNG-SGH-I997 using XDA

This is how i used the hemidall one click to stock here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Then I flash the dark night ICS rom like the op says and it run nice and smooth no lagg so far or any fc really other than when I put S voice onto my phone.. and like I said that Bluetooth, torch, HD video record is choppy, and no hdmi but I really like I just hope they get the flash light sorted out soon I use it all the time!!! Ya that's how
Sent from my SGH-I997 using xda premium powered by Dark Knight

Kdog71588 said:
This is how i used the hemidall one click to stock here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Then I flash the dark night ICS rom like the op says and it run nice and smooth no lagg so far or any fc really other than when I put S voice onto my phone.. and like I said that Bluetooth, torch, HD video record is choppy, and no hdmi but I really like I just hope they get the flash light sorted out soon I use it all the time!!! Ya that's how
Sent from my SGH-I997 using xda premium powered by Dark Knight
Click to expand...
Click to collapse
That's the method I used too.
Sent from my SAMSUNG-SGH-I997 using XDA

BaconTelevision said:
Hey community.
Long time lurker, first time poster. Anyhow, my brother bricked his infuse last night. Apparently he tried to flash an incompatible cwm fw (Nexus S) and rebooted it, and now its stuck at the samsung logo. Secondly, i tried to push it into download mode and it continues to loop. I tried to connect it to Odin and it does not recongize the phone, however it freezes at a picture of a wheel (similar to windows hourglass) and doesnt move from there. i'm assuming its perm bricked at this point, unless you have suggestions. Others have mentioned "jig" and "unbrickable mod" although I could not find any details further than the terms. Any help would be appreciated.
Click to expand...
Click to collapse
ok I lost my self here...Bacon...did you resolve your issues...??

bigjoe2675 said:
ok I lost my self here...Bacon...did you resolve your issues...??
Click to expand...
Click to collapse
I don't think he did
Sent from my SAMSUNG-SGH-I997 using XDA

samsung i997 bootloop no bootloader solution
Dear guys i'm not saying this will be everybody's case but in my shop we got two of this phones with the issue mentioned above, in the two cases the issue was caused by faulty power button, so before you format or flash your samsung i997 i'll advice to go to youtube search for a diassemble video for your phone take out the main board and with your tester verify that your power button is working properly. If not try to replace the power button. i have soved the two cases that way.

[Q] stuck on lg screen on my lg g2x

i recently got into rooting and setting up my phone for new roms but im still new at it. i ended up bricking my phone to the lg screen with the blue swipe across the screen. my computer will not register the driver to use recovery flasher. i need help. anyone wanna help out a noob?

Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section

jj_z1 said:
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
Click to expand...
Click to collapse
i tried to use nv flash but no matter what i do i cant seem to make my phone register in the usb driver. if i could make it register i would be able to flash it then.

Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going

jj_z1 said:
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
Click to expand...
Click to collapse
i dont know how to go about it.

laroacha said:
i dont know how to go about it.
Click to expand...
Click to collapse
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.

jj_z1 said:
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
Click to expand...
Click to collapse
every time i look at my apx driver it always tells me to troubleshoot but it always says driver not installed. ive downloaded the same driver in different posts just to make sure but nothing helps. Wireless shops are useless. I live in vegas and there isnt a single store with a person smart enough to figure it out.lol. ive given my phone up for days at a time to shops who brag about "WE CAN FIX ANYTHING" they lied. well i guess im going to search for a few more hours on here to get some kind of lead. thanks for the help. if you kknow anything else or figure something out i would appreciate the help.

Have you tried this stuff?
http://forum.xda-developers.com/showthread.php?t=1619932
It sounds to me like your pc's jacked up the driver somehow. Try plugging in the phone with the battery out and holding all 3 buttons, go into your device manager and uninstall all the USB drivers. Then reboot and try following the apx driver installation procedure again.
Sorry if you tried all this stuff a million times already.

I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium

superhero7 said:
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.

CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.

Have you tried taking out your SIM card and micro SD card?
Usually right after I take them out and plug in my phone while holding volume up and volume down... it usually works after that.
Yup, that's my problem. No matter how many USB ports I tried it still wouldn't read it until I took out the SIM card and micro SD ;p.

Try this on for size...
laroacha said:
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
Click to expand...
Click to collapse
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:

RVD1 said:
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
Click to expand...
Click to collapse
He can't flash anything to his phone -__- that's the problem we are all trying to solve.

May sound stupid, but have you tried different cords? Maybe your USB cord is bad. Just a thought.
Sent from my LG-P999 using xda premium

@op can you give us screenshots of:
A: what your device manager looks like when you plug your phone in not in apx mode.
And
B: When it is in apx mode.
To do this: right click on my computer>properties>on left hand side, click on device manager. Hit print screen, open paint and tell it to paste. Save and upload here.
Sent from my LG-P999 using xda premium

EEngineer said:
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Click to expand...
Click to collapse
well i brought it to two shops and were both unsuccessful. wireless toyz and smart fix. i have it back and it goes to the lg screen. and instead of the second it flashes from black to a very dim gray back and forth. when i hold the power button along with the volume down it does a master reset and i can press the home button then it takes me to a screen to delete cache partition and what not and you move up and down with the volume keys but i cannot select anything. i think i really messed my phone up.

Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium

Волк said:
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
idk how to post screenshots of my phone without a camera.lol. im about ready to give up. its been way too long with not having a phone.

You hit the print screen button, open paint, and tell it to paste/paste from clipboard.
Sent from my LG-P999 using xda premium