i recently got into rooting and setting up my phone for new roms but im still new at it. i ended up bricking my phone to the lg screen with the blue swipe across the screen. my computer will not register the driver to use recovery flasher. i need help. anyone wanna help out a noob?
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
jj_z1 said:
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
Click to expand...
Click to collapse
i tried to use nv flash but no matter what i do i cant seem to make my phone register in the usb driver. if i could make it register i would be able to flash it then.
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
jj_z1 said:
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
Click to expand...
Click to collapse
i dont know how to go about it.
laroacha said:
i dont know how to go about it.
Click to expand...
Click to collapse
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
jj_z1 said:
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
Click to expand...
Click to collapse
every time i look at my apx driver it always tells me to troubleshoot but it always says driver not installed. ive downloaded the same driver in different posts just to make sure but nothing helps. Wireless shops are useless. I live in vegas and there isnt a single store with a person smart enough to figure it out.lol. ive given my phone up for days at a time to shops who brag about "WE CAN FIX ANYTHING" they lied. well i guess im going to search for a few more hours on here to get some kind of lead. thanks for the help. if you kknow anything else or figure something out i would appreciate the help.
Have you tried this stuff?
http://forum.xda-developers.com/showthread.php?t=1619932
It sounds to me like your pc's jacked up the driver somehow. Try plugging in the phone with the battery out and holding all 3 buttons, go into your device manager and uninstall all the USB drivers. Then reboot and try following the apx driver installation procedure again.
Sorry if you tried all this stuff a million times already.
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
superhero7 said:
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Have you tried taking out your SIM card and micro SD card?
Usually right after I take them out and plug in my phone while holding volume up and volume down... it usually works after that.
Yup, that's my problem. No matter how many USB ports I tried it still wouldn't read it until I took out the SIM card and micro SD ;p.
Try this on for size...
laroacha said:
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
Click to expand...
Click to collapse
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
RVD1 said:
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
Click to expand...
Click to collapse
He can't flash anything to his phone -__- that's the problem we are all trying to solve.
May sound stupid, but have you tried different cords? Maybe your USB cord is bad. Just a thought.
Sent from my LG-P999 using xda premium
@op can you give us screenshots of:
A: what your device manager looks like when you plug your phone in not in apx mode.
And
B: When it is in apx mode.
To do this: right click on my computer>properties>on left hand side, click on device manager. Hit print screen, open paint and tell it to paste. Save and upload here.
Sent from my LG-P999 using xda premium
EEngineer said:
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Click to expand...
Click to collapse
well i brought it to two shops and were both unsuccessful. wireless toyz and smart fix. i have it back and it goes to the lg screen. and instead of the second it flashes from black to a very dim gray back and forth. when i hold the power button along with the volume down it does a master reset and i can press the home button then it takes me to a screen to delete cache partition and what not and you move up and down with the volume keys but i cannot select anything. i think i really messed my phone up.
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Волк said:
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
idk how to post screenshots of my phone without a camera.lol. im about ready to give up. its been way too long with not having a phone.
You hit the print screen button, open paint, and tell it to paste/paste from clipboard.
Sent from my LG-P999 using xda premium
Related
Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..
schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.
Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.
I just joined your club. Wow this sucks.
So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?
I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App
Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?
have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331
same problem..... anybody find something to fix this yet?
From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X
Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.
Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.
Hi all,
My Samsung Galaxy phone is stuck on the Samsung boot up logo. I shut off the phone and it starts up again to the Samsung logo again. I am rooted but still had the stock rom and kernel.
I went to selections and wiped my cache and tried to format it like a new phone. The same thing still happens. I am not sure what else to do. Anyone know how to fix this?
Keep the instructions simple please, if you do know. (I'm a desperate noob)
Thanks for any help.
IF you ever did nandroid than just restore that otherwise.........
Hey first follow this steps to flash any rom. If you flash the rom properly than you can use any stock rom from dev section and use that.
OR
follow this step to go back to stock and it will unroot you.
Vman7765 said:
Hi all,
My Samsung Galaxy phone is stuck on the Samsung boot up logo. I shut off the phone and it starts up again to the Samsung logo again. I am rooted but still had the stock rom and kernel.
I went to selections and wiped my cache and tried to format it like a new phone. The same thing still happens. I am not sure what else to do. Anyone know how to fix this?
Keep the instructions simple please, if you do know. (I'm a desperate noob)
Thanks for any help.
Click to expand...
Click to collapse
Great, I'm downloading the drivers now. My phone was working perfectly. Do you know what may have caused this? Thanks.
I am not sure why it happened but it looks like u cleared cache so that might be the problem. IDK
Vman7765 said:
Great, I'm downloading the drivers now. My phone was working perfectly. Do you know what may have caused this? Thanks.
Click to expand...
Click to collapse
Rocketing on Sky Ics¡
I'm back up and running. If I want to change my rom and kernel, what do you recommend? I midas well do everything now, while I am on work mode. Thanks for your help.
first of all to show that you appreciate my help please hit that thnx button. I am running Sky Ice Rom which is deeply themed rom with faux123's kernel.
Vman7765 said:
I'm back up and running. If I want to change my rom and kernel, what do you recommend? I midas well do everything now, while I am on work mode. Thanks for your help.
Click to expand...
Click to collapse
NP thanks for your help. I spammed that button as much as I could lol.
Same Problem
My problem is that my Rogers SGSII LTE I727R, is stuck on the logo screen, which is flashing the boot screen. When I connect the USB (even after install of Kies and Odin), my PC does not see the device. I am really not sure what to do. I think I set the wrong phone ID when I installed recovery (I think I was supposed to use the T-Mobil SGSII setting), but I selected something else. I then tried to backup the existing ROM, and am now in this unending loop. Does anyone have any suggestions? Thanks.
Follow these steps it will help you go back to stock. ANd reroot your phone.
Barlaw604 said:
My problem is that my Rogers SGSII LTE I727R, is stuck on the logo screen, which is flashing the boot screen. When I connect the USB (even after install of Kies and Odin), my PC does not see the device. I am really not sure what to do. I think I set the wrong phone ID when I installed recovery (I think I was supposed to use the T-Mobil SGSII setting), but I selected something else. I then tried to backup the existing ROM, and am now in this unending loop. Does anyone have any suggestions? Thanks.
Click to expand...
Click to collapse
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Try a different USB port. Avoid rear ports and hubs.
OK, i will try that on a different computer, as I have tried all of the available ports on my laptop. Any other thoughts?
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Have you uninstalled kies? If not uninstall it from your PC. Put your phone in download mode and see if Odin can see the phone.
Sent from my SAMSUNG-SGH-I727 using xda premium
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Try another USB port or another computer. If you can get the logo you are in a boot loop, the most common form of a soft brick. If you can get into download mode you should be able to fix it.
---------- Post added at 04:55 PM ---------- Previous post was at 04:46 PM ----------
Barlaw604 said:
OK, i will try that on a different computer, as I have tried all of the available ports on my laptop. Any other thoughts?
Click to expand...
Click to collapse
Just saw this. Have you tried to re-install the drivers?
Another thought is to try turning off firewall and antivirus when using Odin. I've never had my firewall or antivirus block Odin but I've heard it can happen...
Can you get into download mode? Hold the two volume buttons down, then plug the usb cable into your phone, then you should be in download mode.
I cannot get into download mode. I just keep getting the flashing boot screen, with the corresponding vibration.
mimart7 said:
Can you get into download mode? Hold the two volume buttons down, then plug the usb cable into your phone, then you should be in download mode.
Click to expand...
Click to collapse
What he said. Pull the battery and put it back in. Hold volume up/down and plug in USB. Continue holding volume buttons until you see download mode. Careful not to press the power button during this process.
Sent from my SAMSUNG-SGH-I727 using xda premium
I like how u guys are really trying to help him. Let u guys know that on my first responce I gave him all the steps on how to go back to stock. So if he followed that and nothing happened than he should try USB jig if that don't work than its hard brick!!
Rocketing on Sky Ics¡
Barlaw604 said:
I cannot get into download mode. I just keep getting the flashing boot screen, with the corresponding vibration.
Click to expand...
Click to collapse
Don't panic. If you're in a boot loop it's fixable. It's when you get nothing that you need to worry about a hard brick.
Try the button combo mentioned above to get into download mode. If that doesn't work, pull the battery again and try using just the volume down button button--I've heard people say this worked for them when they had a hard time.
If this doesn't get you into download mode, I guarantee you that a jig will work. You can buy one online or make one yourself for about 75 cents and a cut-up data cable (I had a car charger that I didn't need--car charges the phone through USB port, so I cut that one up). Always good to have a jig, at any rate...
skrambled said:
Don't panic. If you're in a boot loop it's fixable. It's when you get nothing that you need to worry about a hard brick.
Try the button combo mentioned above to get into download mode. If that doesn't work, pull the battery again and try using just the volume down button button--I've heard people say this worked for them when they had a hard time.
If this doesn't get you into download mode, I guarantee you that a jig will work. You can buy one online or make one yourself for about 75 cents and a cut-up data cable (I had a car charger that I didn't need--car charges the phone through USB port, so I cut that one up). Always good to have a jig, at any rate...
Click to expand...
Click to collapse
Yup, when I rooted my phone, the only way I could get it into download was volume DOWN & power.
Sent from my SGH-I727R using xda premium
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
run this:
http://forum.xda-developers.com/showthread.php?t=1590523
I did the exact same thing to my phone the other day. Then install the new rom via clockworld after its done.
But if you installed the 2.3.4 then don't update to any rom besides the kwes 2.3.4 because anything else you won't have audio or anything while in call there is no fix for it yet besides using kdz to downgrade.
Sent from my LG-P999 using xda premium
bj83gc said:
run this:
http://forum.xda-developers.com/showthread.php?t=1590523
I did the exact same thing to my phone the other day. Then install the new rom via clockworld after its done.
Click to expand...
Click to collapse
I tried it and it didnt help.
if i do a normal boot i get the lg logo wiht a loading bar that eventual stops and does nothing
if i boot into recovery i get "s/w upgrading" again
you have to use nvflash to snap it out of that... I remember i had it stuck on that for awhile until i flashed the stock recovery/bootloader stuff and then reflashed cwm and then it finally came to
NVflash CWM from http://forum.xda-developers.com/showthread.php?t=1566681
if you're unsure of the APX drivers set-up you have a more basic guide here:
http://forum.xda-developers.com/showthread.php?t=1056847
Remove the battery.
Plug in your USB cable to your PC.
Hold Volume Up and Volume Down at the same time keeping them held down.
Plug in the USB cable to your phone. (Keep the buttons held until Windows detects a new APX device.)
Open Device Manager in Windows and you should see "APX Device" listed with an error icon.
Right click on the APX device.
Select 'Update driver software'.
Select 'Browse my computer...'.
Select 'Let me pick...'.
Select 'Have disk'.
Browse to directory you extracted the *driver* software to: One-Click-G2x-recovery-flasher-09-23\APX.
Accept any warnings, including the big red alert (you may need to disable UAC).
Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'.
If not, uninstall the driver, reboot, rinse and repeat.
Click to expand...
Click to collapse
Волк said:
NVflash CWM from http://forum.xda-developers.com/showthread.php?t=1566681
if you're unsure of the APX drivers set-up you have a more basic guide here:
http://forum.xda-developers.com/showthread.php?t=1056847
Click to expand...
Click to collapse
No change, thanks for trying :'(
just keep dicking around with NVflash... its the only way you can wake it up from a soft brick of that form
JHaste said:
just keep dicking around with NVflash... its the only way you can wake it up from a soft brick of that form
Click to expand...
Click to collapse
like what, what do i do. i am a total noob.
johnlicoski1204 said:
like what, what do i do. i am a total noob.
Click to expand...
Click to collapse
I don't think you're booting the phone up into cwm the right way.
Lol do this:
Make sure phone is off. While the phone is off hold down the volume down button.
While still holding volume down, hold the power button.
Continue to hold BOTH the volume down and power buttons. When the SECOND LG logo appears, let go of both of the buttons.
And no offense, but if you're not comfortable with modding your phone... you really shouldn't do it or ask someone else who knows what they're doing to do it.
buru898 said:
I don't think you're booting the phone up into cwm the right way.
Lol do this:
Make sure phone is off. While the phone is off hold down the volume down button.
While still holding volume down, hold the power button.
Continue to hold BOTH the volume down and power buttons. When the SECOND LG logo appears, let go of both of the buttons.
And no offense, but if you're not comfortable with modding your phone... you really shouldn't do it or ask someone else who knows what they're doing to do it.
Click to expand...
Click to collapse
Agree modification to a cellphone can be risky.
Sent from my LG-P999 using xda premium
From my personal experiance with the G2x (i thought i had bricked my phone), i have discovered that it is nearly impossible to brick this phone. I had ran the g2x nullifier and fully wiped my phone clean. When I power up the phone, all i get is the initial white LG logo. Luckely, i discovered the following thread that got my phone functional again:
http://forum.xda-developers.com/showthread.php?t=1248644
Try the above thread and see if your phone gets recovered to a functional state.
dot64 said:
From my personal experiance with the G2x (i thought i had bricked my phone), i have discovered that it is nearly impossible to brick this phone. I had ran the g2x nullifier and fully wiped my phone clean. When I power up the phone, all i get is the initial white LG logo. Luckely, i discovered the following thread that got my phone functional again:
http://forum.xda-developers.com/showthread.php?t=1248644
Try the above thread and see if your phone gets recovered to a functional state.
Click to expand...
Click to collapse
That script is perfectly fine and didn't hurt your phone at all. It states that it will wipe everything out even the rom you were previously on. So when the phone rebooted it stayed on that LG logo because it didn't have a rom to bootup.
At that point a quick battery pull and reboot into recovery was all you needed to do.
Sent from my LG-P999 using xda premium
Try flashing the stock recovery thru the one click nvflash utility and leave it off for a few min. Then run the g2x batch cleanup tool and see if it then let's u boot into the recovery. (By holding down volume - when hitting power on)
Sent from my LG-P999 using XDA
johnlicoski1204 said:
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
Click to expand...
Click to collapse
Ok, so then its safe to assume that you rooted your phone first? Then you set up your phone by using nvflash so you can use ClockWorkMod (CWM)? Then booted your phone into recovery and tried to install ICS? If not done in this order then thats your fault. If you did it in this order then you missed something.
A common mistake is trying to install a ROM via CWM while the phone is running. When you do this the phone restarts and gives you the error triangle with android underneath it.
http://forum.xda-developers.com/showthread.php?t=1039985 Tells you how to do as well as provides links to everything it doesn't.
As for recovery they provisded the right link. Follow it to the "T" and you'll be ok.
Try the link below
johnlicoski1204 said:
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
Click to expand...
Click to collapse
Hope fully this fix your issue: http://www.youtube.com/watch?feature=player_embedded&v=TozZKt7_JD8
d12unk13astard said:
That script is perfectly fine and didn't hurt your phone at all. It states that it will wipe everything out even the rom you were previously on. So when the phone rebooted it stayed on that LG logo because it didn't have a rom to bootup.
At that point a quick battery pull and reboot into recovery was all you needed to do.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
But the key issue was that CWM recovery was destroyed as well after nullifing thus leaving me in a stand still to do something. nvflash was the only thing left to recover the phone at that point which worked very well.
There is pretty much no way that after running either the One-Click or Cleanup Batch that he can't get the phone into CWM unless there is a hardware problem. This most likely means that the problem isn't with the scripts or phone, but with the procedure he is attempting.
Even if nullifier (which I don't think is of much use here) had wiped all partitions, the NVFlash will still pop you out of it and leave you with a working CWM.
So keep reading and keep watching videos of how to do it and make sure your drivers are correct. READ a bunch first.
And remember that he got here due to an LG software problem or issue with operation, not from trying to flash as a noob, so he knows he's in over his head right now.
Remember, we all had to start swimming somewhere and it usually wasn't pretty at first. Mine was a corrupted Motorola RAZR.
It appears that this is an older post, but if you are still having this issue, then maybe I can help. If anyone else finds this later, hopefully it helps them as well. I just did something similar and I thought I was screwed. I rooted my phone, installed a ROM (Hellfire... nice ROM BTW), then I got the nullifier. I installed the ROM before I ran the nullifier because I wanted to make sure the ROM worked. However, after running the nullifier, the ROM didn't work.
The only thing that I could get to show was the LG logo at the startup... no second logo (Blue LG), no SW upgrade... NOTHING. The phone wouldn't do anything else. Luckily, I wasn't the first to have this issue and they found the solution...
forum.xda-developers.com/showthread.php?t=1566681
Since you have already done other steps, I am assuming that you already have the drivers installed. So, the only thing you should need to do is download the ROM then install it by clicking flash.bat. The instructions on the page are pretty easy to follow.
No need to deal with the NvFlash until AFTER you do the above procedure. You will need to run it again after the above procedure because it puts it back in the original state (pretty much). The NvFlash will give you the superuser and Clockmod back. You should be good to go after that.
There is no way u can brick the g2x......even if u wanted to.........keep messing around
Sent from my cm_tenderloin using xda app-developers app
Hey community.
Long time lurker, first time poster.
Anyhow, my brother bricked his infuse last night. Apparently he tried to flash an incompatible cwm fw (Nexus S) and rebooted it, and now its stuck at the samsung logo. Secondly, i tried to push it into download mode and it continues to loop. I tried to connect it to Odin and it does not recongize the phone, however it freezes at a picture of a wheel (similar to windows hourglass) and doesnt move from there.
i'm assuming its perm bricked at this point, unless you have suggestions.
Others have mentioned "jig" and "unbrickable mod" although I could not find any details further than the terms.
Any help would be appreciated.
Just checking, have you tried this?:
Remove the battery, and disconnect USB.
Hold, and continue to hold both volume keys.
Continue to hold vol. keys, connect USB.
Insert battery and continue to hold vol. keys for awhile.
That should put you in download mode.
Sent from my SGH-I997 using Tapatalk 2
After retrying with 4 different cables, 3 different machines, and 2 different O.S. I finally got the infuse to be found by odin.
Thanks for all the help
BaconTelevision said:
After retrying with 4 different cables, 3 different machines, and 2 different O.S. I finally got the infuse to be found by odin.
Thanks for all the help
Click to expand...
Click to collapse
Lol next time try heimdale. It for me anyways works first try all the time. I only use Odin when i have to, other then that i always use heimdale. Make sure when you use heimdale plug your phone into another port. Ive figured out that a usb port only recognizes the phone a certain way, as heimdale uses different drivers that you install. On my laptop i have two ports that i do not usually use (one is dedicated to a bluetooth dongle/mouse) so one is set up for odin, the other for heimdale.
Yeah heimdall is the way to go...don't even need drivers...it uses its own special drivers that it will download for you if you don't already have them
Heimdall never fails me...but Odin...well Odin is kinda iffy
Sent from my SGH-I997 using XDA
Heimdall unbricked me twice
Sent from my SAMSUNG-SGH-I997 using XDA
How ?
10 Ch.
rkkaranrk said:
How ?
10 Ch.
Click to expand...
Click to collapse
How....what do you mean how?
rkkaranrk said:
How ?
10 Ch.
Click to expand...
Click to collapse
You talking to me?
Sent from my SAMSUNG-SGH-I997 using XDA
Oppps i am sorry guys i was posting this somewhere else.
rkkaranrk said:
Oppps i am sorry guys i was posting this somewhere else.
Click to expand...
Click to collapse
Lol that's alright.
Sent from my SAMSUNG-SGH-I997 using XDA
This is how i used the hemidall one click to stock here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Then I flash the dark night ICS rom like the op says and it run nice and smooth no lagg so far or any fc really other than when I put S voice onto my phone.. and like I said that Bluetooth, torch, HD video record is choppy, and no hdmi but I really like I just hope they get the flash light sorted out soon I use it all the time!!! Ya that's how
Sent from my SGH-I997 using xda premium powered by Dark Knight
Kdog71588 said:
This is how i used the hemidall one click to stock here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Then I flash the dark night ICS rom like the op says and it run nice and smooth no lagg so far or any fc really other than when I put S voice onto my phone.. and like I said that Bluetooth, torch, HD video record is choppy, and no hdmi but I really like I just hope they get the flash light sorted out soon I use it all the time!!! Ya that's how
Sent from my SGH-I997 using xda premium powered by Dark Knight
Click to expand...
Click to collapse
That's the method I used too.
Sent from my SAMSUNG-SGH-I997 using XDA
BaconTelevision said:
Hey community.
Long time lurker, first time poster. Anyhow, my brother bricked his infuse last night. Apparently he tried to flash an incompatible cwm fw (Nexus S) and rebooted it, and now its stuck at the samsung logo. Secondly, i tried to push it into download mode and it continues to loop. I tried to connect it to Odin and it does not recongize the phone, however it freezes at a picture of a wheel (similar to windows hourglass) and doesnt move from there. i'm assuming its perm bricked at this point, unless you have suggestions. Others have mentioned "jig" and "unbrickable mod" although I could not find any details further than the terms. Any help would be appreciated.
Click to expand...
Click to collapse
ok I lost my self here...Bacon...did you resolve your issues...??
bigjoe2675 said:
ok I lost my self here...Bacon...did you resolve your issues...??
Click to expand...
Click to collapse
I don't think he did
Sent from my SAMSUNG-SGH-I997 using XDA
samsung i997 bootloop no bootloader solution
Dear guys i'm not saying this will be everybody's case but in my shop we got two of this phones with the issue mentioned above, in the two cases the issue was caused by faulty power button, so before you format or flash your samsung i997 i'll advice to go to youtube search for a diassemble video for your phone take out the main board and with your tester verify that your power button is working properly. If not try to replace the power button. i have soved the two cases that way.
Ok so made a big mistake and tried flashing back to a Gingerbread Rom after being on a Jellybean Rom. I know dumb. Now my phone is stuck on the samsung logo. I can't reach download mode or Recovery. On top of that my computer will not recognize my device. I'm hoping to fix this soon as possibe! Any help would be much appreciated!
jmoney860 said:
Ok so made a big mistake and tried flashing back to a Gingerbread Rom after being on a Jellybean Rom. I know dumb. Now my phone is stuck on the samsung logo. I can't reach download mode or Recovery. On top of that my computer will not recognize my device. I'm hoping to fix this soon as possibe! Any help would be much appreciated!
Click to expand...
Click to collapse
Look for Heimdall suite and follow the instructions in the read me to reinstall the driver. Then use a heimdall one-click restore image. That should fix it.
You should be able to enter download mode no matter how messed up your phone may be..
Remove battery and place back in.
Hold both vol+ & vol- and plug in the usb already inserted to the pc.
Sent from my sweet & buttery Infuse
rev3la7ion said:
Look for Heimdall suite and follow the instructions in the read me to reinstall the driver. Then use a heimdall one-click restore image. That should fix it.
Click to expand...
Click to collapse
andros11 said:
You should be able to enter download mode no matter how messed up your phone may be..
Remove battery and place back in.
Hold both vol+ & vol- and plug in the usb already inserted to the pc.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
Any ideas where to find those reinstall driver instructions? The main heimdall post in the infuse community does not have any instructions regarding re downloading drivers I believe. And no there is no download mode. I don't know how that is possible but it is. Download mode is not working on my phone.
I would also like to know the outcome of this, my phone also lost download mode. I'm not sure what happened, I was on the web and it just shut itself off and decided to bootloop itself.
I am almost 100% sure you can't lose download mode.
Sent from my SGH-I997 using xda app-developers app
If your battery super dies it can be hard to get into download mode.
Sent from my SGH-I997 using xda premium
I had the same prob thought it was no download mode also but what fixed my problem was a restart of computer for the driver installation to complete .did you do that after installing the drivers?
Sent from my SGH-I997 using Xparent SkyBlue Tapatalk 2
My friend is unable to get his phone into download mode. His phone loops constantly from the Samsung screen to the CM screen and then back to the Samsung screen.
Pulling the battery and holding down the volume buttons does nothing. Connecting it via USB just brings up the battery screen, but that loops as well (shows the 'thinking' icon then the battery screen). Odin does not recognize it, not sure if he's tried Heimdall yet. But even if he can get that to recognize it, will it do him any good if the phone is constantly cycling power?
As others above have stated, it is not likely you have lost download mode, most likely not performing all of the correct steps. If you do the steps properly and there is no download mode you will need to buy a jig ($2.) , can be found on Amazon.
Once you can achieve download mode, follow qkster's Heimdall instructions, post 1 will get you back to stock GB, and post 2 will get root access again. If you have Kies installed, uninstall it before doing anything else as it is a source of issues.
Note that you must have the latest version of Java. Also, use the same usb port on your computer each time you run Heimdall, be sure that it is a properly operating usb port as well.
Many thanks to qkster for the guide and Entropy for the kernel.
http://forum.xda-developers.com/showthread.php?t=1524081
as Pony stated. The other reason we've been seeing the constant power loop is due to a stuck power button. You may need to take it apart and clean the power button.
Look thru the q/a threads...lately, the power button thing has been pretty common
andros11 said:
You should be able to enter download mode no matter how messed up your phone may be..
Remove battery and place back in.
Hold both vol+ & vol- and plug in the usb already inserted to the pc.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
Agreed! I've borked mine something awful before (namely, being careless and trying to go back to GB from JB) and losing IMEI, no recovery, etc. and could still get DL mode. I too had issues with Heimdall, albeit different, but if you use the same usb port (pull batt, plug usb in, hold vol. up/down....then put batt. in and continue to hold until DL mode)....go to control panel/system/device manager and find USB/samsung composite device, right click and update drivers. This is if Heimdall isn't working for you, use Odin v3 and flash GTG's back to stock. It will take you back to froyo unrooted. If Heimdall is working, like others have stated....be sure to have the latest java installed.
edit: If you can use Heimdall, it will prompt you to install correct drivers once you start the program.
qkster said:
as Pony stated. The other reason we've been seeing the constant power loop is due to a stuck power button. You may need to take it apart and clean the power button.
Look thru the q/a threads...lately, the power button thing has been pretty common
Click to expand...
Click to collapse
Thanks guys for the quick replies (that I just now saw, lol... whoops!). His power button is actually broken on the board itself. He's made his own jig and gets it to boot up, but the phone itself is pretty much done as he's not able to do anything without the power button. He's looking at picking up a SII probably. Appreciate all the help though! :good:
Chris Hansen said:
Thanks guys for the quick replies (that I just now saw, lol... whoops!). His power button is actually broken on the board itself. He's made his own jig and gets it to boot up, but the phone itself is pretty much done as he's not able to do anything without the power button. He's looking at picking up a SII probably. Appreciate all the help though! :good:
Click to expand...
Click to collapse
Even with the pwer button broken, if the screen is still intact, a new replacement screen is closer to $135+.
He may be able to sell that screen pretty quickly for $75-$100.
His screen is trashed too, so he's pretty far up the creek without a paddle.
He's trying to sell it on eBay for parts currently. We'll see how that pans out.