[Q] Bricked new phone need help - Samsung Galaxy S (4G Model)

i recently bought a samsung galaxy s 4g, and i used odin and flashed a sidekick (my brothers phone) rom on accident.
cant get to the download mode
cant get to the recovery
cant power on the phone
it hasnt yet been 30 days since ive had the phone, so could i take it back to the store and just say its not turning on can i get an exchange?

Yeah just say it wont turn on
Sent from my SGH-T959V using XDA App

Or you could follow the directions posted in this link to unbrick, as posted by Jager in the General SGS4G forum.

That method worked for me but its cause I flashed the correct phone deivce rom he didnt
Sent from my SGH-T959V using XDA App

It still may work.
Sent from my SGH-T959V using XDA Premium App

It happens to me all the time. Just plug phone to computer holding volume up and down at same time. It shows the phone-cable-pc thingy and that's download mode. I went into that when I failed to Odin by mistake and just decided to try to Odin while in that "mode" and it did flashed. Hope this helped.
*Have Odin open before you plug cuz' that way you know it found the device.
*I think this method shown on Rootzwiki I discovered first but never posted. It happened while flashing 1st Audiophile. LOL... anyway, w/e. Good luck!

cj_31 said:
It happens to me all the time. Just plug phone to computer holding volume up and down at same time. It shows the phone-cable-pc thingy and that's download mode. I went into that when I failed to Odin by mistake and just decided to try to Odin while in that "mode" and it did flashed. Hope this helped.
*Have Odin open before you plug cuz' that way you know it found the device.
Click to expand...
Click to collapse
Try this even if the screen stays black/off, as long as Odin recognizes it (You'll get the yellow box with COM# in it) these steps will help.

Related

[Q] Won't even turn on...

Samsung Galaxy S 4g
Softbricked when I mistakenly loaded the vibrant rom. I have been reading for hours on how to fix this. After dozens of tries I found the guide for loading (with odin) T959UVKA6_REV05_home_low_CL860813.
I did have re-partition checked when I probably shouldn't have. I was trying to load s1_odin_20100512.pit as well. Odin said the process was successfully run but when I tried to reboot my phone nothing happened. I can't get it to even boot to the download screen.
I've tried every combo in the book (including remove battery, plug in USB, hold volume up/down, replace battery). I've left the battery out for as long as 10 minutes too (excessive, I know) That worked at least a dozen times before but now my screen won't even start up.
HELP! What do I do?!
tyler611 said:
Samsung Galaxy S 4g
Softbricked when I mistakenly loaded the vibrant rom. I have been reading for hours on how to fix this. After dozens of tries I found the guide for loading (with odin) T959UVKA6_REV05_home_low_CL860813.
I did have re-partition checked when I probably shouldn't have. I was trying to load s1_odin_20100512.pit as well. Odin said the process was successfully run but when I tried to reboot my phone nothing happened. I can't get it to even boot to the download screen.
I've tried every combo in the book (including remove battery, plug in USB, hold volume up/down, replace battery). I've left the battery out for as long as 10 minutes too (excessive, I know) That worked at least a dozen times before but now my screen won't even start up.
HELP! What do I do?!
Click to expand...
Click to collapse
Wow... Dude... You are offically bricked. Samsung can only help now.
Not trying to be negative, but you really shouldve read the instructions!
:-(
Sent from my SGH-T959V using XDA Premium App
I think I am in exactly the same boat as the OP. What is the best way to resolve this? Bring it into T-Mobile? Send it in to Samsung somehow? Is there a number to call for warranty repair or something?
Sometimes ODIN will still see the phone even when the screen is totally black. If ODIN can still see it, you can reflash a good ROM ~ get it going again.
Sent from my SGH-T959V using XDA App
stephen_w said:
Sometimes ODIN will still see the phone even when the screen is totally black. If ODIN can still see it, you can reflash a good ROM ~ get it going again.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I did the same thing as the OP. ODIN wouldn't recognize the phone. Ended up letting it sit overnight and then ODIN worked.
If you are flashing ROMs you should probably get a jig.
This guy is a forum member and great to deal with. (can't post the link) go to mobile tech videos dot com
Leave the battery off for a few minutes. Try Odin 1.85 to see if it recognizes the phone
Sent from my T959 using xda premium
Please use the Q&A Forum for questions Thanks
Moving to Q&A

( help please!!! )

Hello Everyone, just like to say i've been following XDA forums for awhile now, i've never had to ask for help cause i usually find a solution if i do my research, but this time im in need of some. So heres what happened,.... I just had flashed my sgs4g back to stock+root using Odin, everything was fine until i decided to flash a different rom using Odin, during the process everything was running good until towards the end, instead of odin saying pass it said failed, then my phone switched screens on me, instead of download mode, its now in this cell phone, exclamation point, computer screen, from what i read it should still be able to be read by Odin to flash back to stock, but my problem is it dont get read by the computer no more, i've tried to remove the drivers and then reinstall them but its still the same screen and Odin dont read it, Any suggestions would be Awesome!!!, Thank You,... ahead of time
The only time Odin has not found my phone was because it needed a reboot.
Sent from my SGH-T959V using xda premium
Excuse me for not knowing this, but do you mean to reboot Odin? or the phone?
Your computer would be my bet.
Sent from my SGH-T959V using xda premium
Reboot and plug the phone in a different USB port. Do a battery pull wait and then try again.
Sent from my SGH-T959V using xda premium
Try this
Unplug your phone from the computer and pull the battery
Start Odin and load your files
With the battery still pulled, plug your phone into the USB on your PC
Hold Vol+Up and Vol+Down and re-insert the battery
Odin will now recognize your phone.
Hit Start
Thanks again everyone for your input, but unfortunately my computer and phone stop cooperating with each other, i tried rebooting my computer and deleting all files and re-installing them, and still nothing! not sure what's going on, but later today i'm gonna try all this with my buddy's computer hopefully it works....

Help, my phone is not booting. only showing light on the button.

Please help me. My Infuse 4G doesn't boot. All I see was light on the button. This what happened. I want to go back to stock and use [ODIN][UCKE3] Return to stock (Updated 06/08/11) by gtg465x . I right click on Odin and run as Admin. Odin see my phone on a download mode. I select infuse.pit on PIT, PDA in Pda, and Phone in Phone. then click Start. It got stuck at factory.fs (don't remember the name actual name). It stuck there for so long, maybe like an hour. Then I decide to unplug and pull battery out. close the Odin and redo the step again. This time the status bar went half way and then got stuck again. I left it overnight just to see if it's actually finish and it never did. Just stuck there. Turn the phone on and i only see light on the button. Is my phone dead? I can still able to get to download mode but the phone won't boot.
I done return to stock so many times and was successful. This was the first encounter I had where Odin stuck and never complete it flashing.
Try things like reinstalling the drivers, another pc, another usb cable etc.
Thanks. Will try that and also i will try this [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) since on FAQ #4 seem to be in my case. But if members had other recommendation, please post. thx in advance
cat2115 said:
Thanks. Will try that and also i will try this [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) since on FAQ #4 seem to be in my case. But if members had other recommendation, please post. thx in advance
Click to expand...
Click to collapse
Getting stuck on the factory.fs is pretty common here. You might try charging for a bit to see if you can get it to show signs of life. And that link up there^^^(UCKD5 Stock+Root+3e) has worked for me when gtg's didn't. Read the instructions for it carefully as you don't have to check as many boxes. You only need to load the file into the PDA slot. Also if you didn't have the drivers installed your phone wouldn't show up, so that's not your problem (although you could try re-installing them for **** and giggles)...
If THAT doesn't work try Adam's Heimdall one click HERE
If all else fails try a different PC. I had to and it worked like a charm.
Good Luck
Just my 2¢
Sent from my SAMSUNG-SGH-I997 using XDA App
I had a similar problem last week I tried on my dads computer, nothing, then went to my computer since my computer had the drivers already on it cuz I used it to put music on my sd card it read it fine and they process went smoothly, so try on a computer that had had it
plugged it in before the problem and if it doesn't find threw phone restart they computer and re put the phone in download mode and try again and keep doing that till it recognizes the phone and it should work then
Sent from my SAMSUNG-SGH-I997 using xda premium
Some times just trying a different USB port on the same computer will help to. Not sure why but on my laptop the USB port on the right my Captivate did not like for flashing but the one on the left side always worked right.
Thank you all for helping me out. My infuse is now back in business. I use [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) but this one got my phone to always boot in recovery mode no matter what i did. So i decide to try Heimdall One-Click Back-To-Stock UCKJ4 + Easy CWM install [2.3.6] (FOR AT&T USERS) and then flash LinuxBozo's Defuse 1.5 kernel. Successfully flash it . However after using Heimdall One-Click, ODIN did not see my phone when it's in download mode. Besides that, everything went well.
cat2115 said:
Please help me. My Infuse 4G doesn't boot. All I see was light on the button. This what happened. I want to go back to stock and use [ODIN][UCKE3] Return to stock (Updated 06/08/11) by gtg465x . I right click on Odin and run as Admin. Odin see my phone on a download mode. I select infuse.pit on PIT, PDA in Pda, and Phone in Phone. then click Start. It got stuck at factory.fs (don't remember the name actual name). It stuck there for so long, maybe like an hour. Then I decide to unplug and pull battery out. close the Odin and redo the step again. This time the status bar went half way and then got stuck again. I left it overnight just to see if it's actually finish and it never did. Just stuck there. Turn the phone on and i only see light on the button. Is my phone dead? I can still able to get to download mode but the phone won't boot.
I done return to stock so many times and was successful. This was the first encounter I had where Odin stuck and never complete it flashing.
Click to expand...
Click to collapse
I was stuck in Samsung logo. And cannot get into the Download mode. Could you help me with that? Or anyone?
pkayrat said:
I was stuck in Samsung logo. And cannot get into the Download mode. Could you help me with that? Or anyone?
Click to expand...
Click to collapse
What have you tried so far to get in to Download mode?
Sent from my SAMSUNG-SGH-I997 using XDA App

[Q] Help Me I really effed up!

Good Morning Everyone, This is my first post. I try to never post just read. I have read and read but to no avail. I have a AT&T Samsung infuse 4g. it WAS running froyo. What I mean by WAS, is that I was trying to install the modded 3e recovery so I could install clockworkmod recovery. During this process I read that I need to mount the /system partition as read/write I did this using the tool box that was created by some of your developers. It is awsome by the way. Well I did that and put a new recovery file in the /bin but it did not work as the website claimed so I thought well I should delete the old one. Bad Idea when I did the reboot it stopped me at the samsung screen. I tried to hard reboot it pulled the battery talked to it with a really kind voice and nothing happend. So I decided to use GEG's Ultimate Unbrick because this has worked for me in the past when i have messed up. So I put my phone into download mode and started the process with Odin. And here is where it gets bad.... one of my children was talking with me during the process and he decided to unplug my phone.. AHH EFFFFFF! I thought. Well when I tried to fix it it was to late. My phone will no longer turn on or even pretend to start. I am broke and cannot afford a new phone plus my wife would kill me seeing we have 6 children and it is right before christmas if I came home with a new galaxy note 2 Please Please can any one help a desperate dad with a busted Samsung Infuse. Thank you all for this awesome website that has taught me alot.. Please dont kill me for posting something someone has already posted because I could not find anything that was helpful for this situation with my phone.
Xda is awesome!
Well I didnt read good enough I guess because while I was waiting not so patiently for a reply I found this http://forum.xda-developers.com/showthread.php?t=1194294 which got me back to download mode yes!!!! Thank you thank you thank youXDA love you guys! Merry Christmas! PS I still want the Galaxy Note 2 so if you have a extra one please PM me and I will give you my address LOL!
MerkTheMedia said:
Well I didnt read good enough I guess because while I was waiting not so patiently for a reply I found this http://forum.xda-developers.com/showthread.php?t=1194294 which got me back to download mode yes!!!! Thank you thank you thank youXDA love you guys! Merry Christmas! PS I still want the Galaxy Note 2 so if you have a extra one please PM me and I will give you my address LOL!
Click to expand...
Click to collapse
Awesome! Glad you got your phone functioning again. Being persistent in searching and reading and trying to find answers usually results in good outcomes. :thumbup:
Sent from a de-Funkt Infuse
Okay now I have really done it this time. So I worked a 18 hour day and thought well instead of getting some rest i will install Gingerbread on my infuse. To make a long story short while I was using odin to install it paused for a long time at the format stage, so I thought well I will just turn it off even though it says not to and then.....well it did a rainbow colored screen I tried to figure it out last night with no luck. So I have been working on it all morning the rainbow screen is gone but now it just goes from black to all white screen. I have tried every possible way to get into download mode with no luck. Am I screwed or what? Does anyone have any suggestions. If I am out of luck does anyone know if bestbuy's warrenty covers rooted phones that are [email protected] bricked?
You just need To update your boot loader.
You can navigate in the screwy screens but it takes patience and some guesswork. Been there
Also...
Good instructions here
http://forum.xda-developers.com/showthread.php?p=14550608
USB cables have given me issues as well as drivers. Install Kies to get the drivers.
Another...
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda app-developers app
Sent from my SGH-I997 using xda app-developers app
saxk said:
You just need To update your boot loader.
You can navigate in the screwy screens but it takes patience and some guesswork. Been there
Also...
Good instructions here
http://forum.xda-developers.com/showthread.php?p=14550608
USB cables have given me issues as well as drivers. Install Kies to get the drivers.
Another...
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda app-developers app
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
It still will not get me into download mode it is powering on and off connecting and disconnecting I have the drivers installed I have tried gtg's guide I have tried qstars one click nothing is working. These have worked for me in the past but that was because I can get into down load mode. Unfortunately not any more Is there a way to make the phone stay on and connected so it stops going black to white to black screen? I am so bummed out! I have been reading for so many hours my brain hurts. I have learn a ton but I can't do anything with my new knowledge with no phone!!!AAAHHHHHH
MerkTheMedia said:
It still will not get me into download mode it is powering on and off connecting and disconnecting I have the drivers installed I have tried gtg's guide I have tried qstars one click nothing is working. These have worked for me in the past but that was because I can get into down load mode. Unfortunately not any more Is there a way to make the phone stay on and connected so it stops going black to white to black screen? I am so bummed out! I have been reading for so many hours my brain hurts. I have learn a ton but I can't do anything with my new knowledge with no phone!!!AAAHHHHHH
Click to expand...
Click to collapse
if you're boot looping in the samsung logo, it could be your power button. search for how to fix power button
qkster said:
if you're boot looping in the samsung logo, it could be your power button. search for how to fix power button
Click to expand...
Click to collapse
Qkster its a honor to have you comment on my thread, Unfortunately Im not boot looping to the samsung logo it is just a black then white then black back and forth taunting me with every blink. I did read the thread about the power button earlier though and that is unfortunately not the fix either. I do appreciate the input you guys really do try and help! Maybe you can answer a question for me is there a way to get to the phone through command prompt? I really need this phone fixed. My wife has been telling me I shouldnt be messing around with it because im gonna break it. I really dont want to tell her she was right. I will never hear the end of it lol!
MerkTheMedia said:
Qkster its a honor to have you comment on my thread, Unfortunately Im not boot looping to the samsung logo it is just a black then white then black back and forth taunting me with every blink. I did read the thread about the power button earlier though and that is unfortunately not the fix either. I do appreciate the input you guys really do try and help! Maybe you can answer a question for me is there a way to get to the phone through command prompt? I really need this phone fixed. My wife has been telling me I shouldnt be messing around with it because im gonna break it. I really dont want to tell her she was right. I will never hear the end of it lol!
Click to expand...
Click to collapse
You're too kind, Merk.
I'm not sure what happened to your phone. The Infuse is pretty sturdy. Flashing should not cause much of an issue. The faulty power button and corrosion of the circuit board were the most I've seen reported.
This is what I use to force the phone into download mode:
http://www.ebay.com/itm/Micro-USB-J...665854?pt=PDA_Accessories&hash=item3f201c4f3e
Once in DL mode, it's a matter of choosing Odin or Heimdall to bring it back to stock.
One other thought, try a different battery as well.
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
michaelsinbad said:
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
Click to expand...
Click to collapse
Well im going to give it a shot I still have the old infuse I tried to make my own jig which didnt work for me so I took it into bestbuy and they gave me a brand new phone and in all of the hustle and bustle of christmas shopping going on around me they did not take my bricked infuse so now I have a spare to tinker with. Thanks I will definately give it a try and report with my findings
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
michaelsinbad said:
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
Click to expand...
Click to collapse
okay I tried but that didnt work either. Can you go ahead and explain "exactly" what you did maybe it will work!
Thanks again for everyones help!
Ok first I downloaded the unbrick package from this website. I downloaded the drivers for the infuse (not sure exactly where I got them from). I would just Google them. Then I tried every USB port on the laptop. Then switched cables and it finally worked. Opened Odin 1.7 and clicked pit, then flashed. Then I unplugged it, took the battery out and put back in and tried to boot. Didn't work. Then flashed PDA. Did same steps as before and still didn't work. Then flashed phone file. Tried to boot and still didn't work. Then I flashed all 3 files at once. Also, not sure if you know or not but the only thing that should be checked in Odin is f: reset time. Then the phone booted up and it stayed on at&t screen for about 5 minutes then finally came on. Also, you could also try to flash this other PDA file on there. I have the link saved on my computer but I'm not at home right now so I'll have to post that later. In easier steps
1. Put phone in Download mode and plug into pc.
2. Run Odin as admin and only thing checked is f reset time.
3.Flash pit then try to boot
4. Flash PDA then try to boot
5. Flash phone then try to boot
6. Flash all three at once
7. After flash While in download mode, unplug USB cable, take battery out and put back in
8. Reboot phone.
Sorry everything is all jumbled, I just got back to my home state from a road trip and I'm running on about 6 hours of sleep in 3 days. I hope this works for you. Also, there is a video on YouTube of a unbrick service for the phone. Its $30. I personally would not try it but its just an idea if you would want to.
Sent from my SAMSUNG-SGH-I747 using xda premium
I had the issue where I had the phone, the exclamation mark, and the computer symbol (The Black Screen of Death: Imaged Attached), that is all it would show when I turned it on. I thought the phone was completely bricked until I did the following, which put it into a hidden download mode and allowed ODIN to recognize it. I DID NOT NEED TO BUY A USB JIG.
1. Make sure you have Odin already downloaded and ready to go.
2. Remove the SIM and SD Cards
3. Load up Odin and make sure it is up and running on the computer. DO NOT plug your phone into the computer yet.
4. Reinstall the Battery and plug the phone to the USB cable to the computer.
5. Hold down both Volume keys and then push and hold the power button
6. Keep holding the buttons until it goes to black, KEEP HOLDING A SECOND TIME until it goes to black and the icon comes back on.
7. Now when it goes Black the second time release the Power button only.
8. You should now be in Download mode. The key is holding the buttons, letting it go to black once, and then letting it go to black again, and then release only the power button while your fingers are still on the volume buttons.
9. Now Odin should recognize the phone on a Com port (turn yellow).
10. You are now ready to return it back to stock.
I hope this helps!
did you ever get your infuse fixed man?
Sent from my SAMSUNG-SGH-I747 running CM10 JB 4.1.2 using xda premium
Yes I tried to make my own jig but my fat shaky hands could get the end of the wires to hit the correct contacts so I ordered one online and that got me into download mode! Now I'm running jelly bean! Thanks to everyone that helped out I love you guys!!!! PS. Don't skip backing up your efs folder!! Unless you want a headache. But with all my problems it has taught me a lot. My number one tip is to read read read there is always an answer! Thanks again everyone! Always hit the thanks button its the least we can do for all of these brilliant hard working developers.
Sent from my SGH-I997 using xda app-developers app

Stuck on download screen, but not in download mode.

I searched for three days before posting this, hoping for an easy answer. I tried to flash the GOV33 Lean Performance ROM last week and ran into a few problems. I followed the instructions and wiped the phone back to factory, clearing everything several times. I then tried to flash the rom as directed, but it acted like there was no phone present, so due to a lack of free time I gave it up as a bad job and started using the sidekick normally with the fresh wipe. No problems until yesterday. For some reason, for the entire day, the phone would not connect to the Tmobile network. So, when I got home I held down the power button to reboot it, and when it rebooted, it showed the downloading screen with the yellow triangle and the android with the shovel. Since then it has done and shown nothing else. I can't get my computer to recognize it to Odin it back to factory, and no button combination does anything. I am totally stuck and am inches from calling this phone bricked and letting my son shoot it.
Well I'm somewhat of a noob when it comes to Samsung phones, even with all the crazy **** I've done to this one occasionally I'm at a loss. Is it possible you have a sticky button somewhere? Like forcing download mode even after a battery pull? Also do you for sure have the proper drivers installed or rules(for Linux) to use download mode? Have you tried hiemdall? Have you tried a different USB cable or different computer?
Sent from my Nexus 7 using xda premium
This may be due to faulty odin . I'm not a wizard hell I look to ric an this wizard above me for help ahah xD
Ill ask a few questions first
Can the plug be falty an not reading the phone?
Are any of the buttons "sticky" in the term when you press is down it doesn't give the nice load click but kinda slowly pushes it?
Did you try this way for odin vvvvvvv? (Its my personal way I odin as it doesn't read most times on my old pc)
But yea my phone doesn't get reconized for awhile when trying t odin what I do is go into download try to odin if it doesn't work I pull the baatter an put it back in which will lead to odin with a different image then from there you want to try to odin with bootloarders on/or off if it fails turn it to the opposite (so if you turned it on an failed turn it off)
Sent from my SGH-T839 using xda app-developers app
Well, after trying multiple things, none of which worked, I finally found success with the Heimdall one click total wipe. she lives again.

Categories

Resources