My p500 got hard brick - Optimus One, P500, V Q&A, Help & Troubleshooting

Some 1 plz help me
while flashing with WP7 mango tango my phone got bricked firs it loss its signals ,so i flashed it wit iosdroid then also it shows the same problem....after this i seek some helps from my friends they tell me to flash the kernel so i done so... nw it have no menu no signal and nothing plz help me soon i dnt have any oter phone plz hel me to unbrick it.I tried so many ways but nthng is effective plsssss help me sooooooon

Doesn't the phone turn on?
Just flash a new baseband
my :tank: has blown your house up

Boot to recovery, flash the rom and then flash the old bb fix. Seems you are on old bb and the rom is for the new bb. Were you on froyo 2.2 when you flashed the mango tango rom?
Sent from my LG-P500

Flash oldbb fix after complete wipe
Sent from my LG-P690 using xda premium

rijukrishnan said:
Some 1 plz help me
while flashing with WP7 mango tango my phone got bricked firs it loss its signals ,so i flashed it wit iosdroid then also it shows the same problem....after this i seek some helps from my friends they tell me to flash the kernel so i done so... nw it have no menu no signal and nothing plz help me soon i dnt have any oter phone plz hel me to unbrick it.I tried so many ways but nthng is effective plsssss help me sooooooon
Click to expand...
Click to collapse
Can you see LG logo on your phone or can you connect it to computer in emergency mode. If either of this is true than your phone is not hard bricked. Its just a soft brick and can be resolved easily.
So can you tell us the exact status of your device. So that others can help you.

Yes I can connect it in emergency mode it shows startup screen an unlock screen but no signal and menu can I fix it via kdz updater

This is not a hard brick. A hard brick is when the device no longer turns on
I'M BATMAN

Wat to do next.
Sent from my SHW-M250S using xda app-developers app

rijukrishnan said:
Yes I can connect it in emergency mode it shows startup screen an unlock screen but no signal and menu can I fix it via kdz updater
Click to expand...
Click to collapse
Sent from my SHW-M250S using xda app-developers app

how can i fix dis prblm ........ plz discribe in detail .. am a nube in this field
Sent from my SHW-M250S using xda app-developers app

Which custom recovery are you using?
Sent from my LG-P500

Amonra
Sent from my SHW-M250S using xda app-developers app

Can you boot into recovery? If you can, flash a rom (clean flash with all wipes ). Try hephappy's 9.2.1 or cyberics 3.0. Boot into the rom and check your bb. If it says v10 its old bb. Flash the old bb fix. If it is 20, you are on new bb and no need to flash the fix. You should get network back.
Sent from my LG-P500

Yes try kdz updater or lgmdp to flash official firmware. Then root again, flash custom recovery and then any custom rom you like.
But don't remove your battery during flashing or interrupt the process as it can hard brick your phone.
Sent from my LG-P500

Hey can u help me via FB
Sent from my SHW-M250S using xda app-developers app

This is the exact situation of my phon
Sent from my SHW-M250S using xda app-developers app

Sent from my SHW-M250S using xda app-developers app

Have you tried reboot into recovery,clean all cache, dalvik, data, system and then re-flash the rom? Try an ics rom as its newer and almost nil bugs.
Sent from my LG-P500

p500 stuck at booting
[16:44:00:378] : =============================================
[16:44:00:378] : Log is started on 28.04.2013, at 16:44:00:378,
executable: C:\Users\user\Desktop\riju files\kdz-udpate\KDZ_FW_UPD.exe (ProcID: 0x00000c64),
compile time : Dec 8 2010 09:19:37
[16:44:00:379] : Version :
[16:44:00:398] : Get Usb Port
[16:44:00:404] : rsi.strFriendlyName=Communications Port (COM1)
[16:44:00:404] : Remove Communications Port (COM1)
[16:44:00:404] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM5)
[16:44:00:404] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[16:44:00:404] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM5
[16:44:00:404] : Port = COM5
[16:44:00:416] : UNKNOWN : Req(12) -> Rsp(13)
[16:44:00:417] : UNKNOWN : Req(12) -> Rsp(13)
[16:44:00:418] : UNKNOWN : Req(12) -> Rsp(13)
[16:44:00:418] : >> DIAG_STATUS_F FAILED
[16:44:00:423] : >>Get Model Name [DIAG_VERNO_F]
[16:44:00:424] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:425] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:426] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:427] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:428] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:429] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:429] : FAIL (No Phone)
[16:44:00:429] : GetModelName() Operation Failed Check Diag CMD
[16:44:00:429] : EMERGENCY Booting Mode
[16:44:00:429] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[16:44:00:430] : BS/P500/7D
[16:44:00:430] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[16:44:00:441] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[16:44:00:441] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[16:44:00:442] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[16:44:00:442] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[16:44:00:443] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[16:44:00:443] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[16:44:00:443] : NV Write Fail : NV ITEM 9028(9028)
[16:44:00:543] : >> GET DLOAD COMM MODE
[16:44:00:544] : [GetCommMode] Communication mode : 2
[16:44:00:544] : Pre Nand Download
[16:44:00:544] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[16:44:00:544] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[16:44:00:545] : [COM5] >>NandFlashInitWithFile(PARTITION TBL)
[16:44:00:545] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[16:44:00:647] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[16:44:00:647] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[16:44:00:647] : [COM5] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[16:44:00:662] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[16:44:00:673] : [COM14] >>Dl_AsyncWrite()
[16:44:00:673] : >> AMSS FLASHING ...
[16:44:00:675] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
16:44:15:377] : RX Timeout : 3.0 seconds
[16:44:15:377] : RX TIMEOUT
[16:44:18:387] : RX Timeout : 3.0 seconds
[16:44:18:387] : RX TIMEOUT
[16:44:21:398] : RX Timeout : 3.0 seconds
[16:44:21:398] : RX TIMEOUT
[16:44:21:398] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[16:44:21:398] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[16:44:21:398] : Close Port<<
[16:44:21:398] : TYPE_WPARAM_UPGRADE_ERROR
[16:44:21:398] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 5
[16:44:21:431] : Log finished
after this show only a black screen only and a cmnd Fast boot started

Thanx for all helps my fon got life back
Sent from my GT-S5360 using xda app-developers app

Related

[Q] how to recover a bricked lg optimus p500 which is 'not' detecting by pc

mine is an rooted lg optimus p500 with stock gingerbread 2.3.3 ,firmware v20c for india.last day i installed rom manager trail,when i tried to back up current rom,the phone gone off,now it is strucked at lg logo.i tried kdz for installing another stock rom.but it says phone is not connected. i checked through adb,when typing command 'adb shell' it also says no devices found.hard reseting is not working,no emergency mode. what to do??? pls help me.
Did u flash recovery first before hitting backup current rom? If you are getting LG logo then u should get emergency mode. Press volume up button+return key + connect the usb cable connected to your PC all at the same time. http://forum.xda-developers.com/showthread.php?t=883314 Read this. it will help u.
reinstall drivers.
let your phone be on (stuck at lg logo), connect to computer, flash custom recovery from lgmdp.
There might errors occur at nv backup or nv restore but it will flash recovery.
sweettaniyaa said:
Did u flash recovery first before hitting backup current rom? If you are getting LG logo then u should get emergency mode. Press volume up button+return key + connect the usb cable connected to your PC all at the same time. http://forum.xda-developers.com/showthread.php?t=883314 Read this. it will help u.
Click to expand...
Click to collapse
thnks. phone recovered. then how to back up current rom using rom manger????.do i want to flash recovery first.??
phone not even starting
hi everyone,
i tried to update the firmware on my op1 p500.it came to emergency mode,but after this some error occured and kdz updater showed 'c drive erased'
and now my phone is not even starting.
it is in warranty,but i dnt knw wat reason i can tell at the service center,that wat happened to the phone.
Plz help.
farzii said:
hi everyone,
i tried to update the firmware on my op1 p500.it came to emergency mode,but after this some error occured and kdz updater showed 'c drive erased'
and now my phone is not even starting.
it is in warranty,but i dnt knw wat reason i can tell at the service center,that wat happened to the phone.
Plz help.
Click to expand...
Click to collapse
If the phone can't boot, then it's alright. Easy. Something like "I switched it off before I went to sleep and the next morning I couldn't turn it on" should do the trick
Sent from my LG-P500 using xda premium
farzii said:
hi everyone,
i tried to update the firmware on my op1 p500.it came to emergency mode,but after this some error occured and kdz updater showed 'c drive erased'
and now my phone is not even starting.
it is in warranty,but i dnt knw wat reason i can tell at the service center,that wat happened to the phone.
Plz help.
Click to expand...
Click to collapse
Just say when you are updating firmware it had an error and your phone would not start up.
Lg bricked
I've got a similar problem;
Rom manager crashed my phone (lg p500) when i was trying to back-up the original rom. The Phone booted in <b> fastboot mode </b>, i've followed the guide your guide to recover, but the phone crashed and even the fastboot mode disappeared. After a long research i've found the kdz 'ultima ratio' system, i've started the phone to <b> emergency mode </b> followed all the procedure (shaking included) trying to flash my phone to V10C.kdz, the result was
[23:14:11:932] : =============================================
[23:14:11:932] : Log is started on 06.03.2012, at 23:14:11:932,
executable: C:\Users\giuseppe\Desktop\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00000810),
compile time : May 24 2011 11:19:45
[23:14:11:932] : Version :
[23:14:11:932] : Get Usb Port
[23:14:11:979] : rsi.strFriendlyName=Porta di comunicazione (COM1)
[23:14:11:979] : Remove Porta di comunicazione (COM1)
[23:14:11:979] : rsi.strFriendlyName=LGE Bluetooth TransPort (COM4)
[23:14:11:979] : Remove LGE Bluetooth TransPort (COM4)
[23:14:11:979] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM11)
[23:14:11:979] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[23:14:11:979] : WM_COPYDATA žÞœÃÁö ºž³¿ 1 - COM11
[23:14:11:979] : Port = COM11
[23:14:11:995] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:12:010] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:12:026] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:12:026] : >> DIAG_STATUS_F FAILED
[23:14:12:041] : >>Get Model Name [DIAG_VERNO_F]
[23:14:12:057] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:073] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:088] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:104] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:119] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:135] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:135] : FAIL (No Phone)
[23:14:12:135] : GetModelName() Operation Failed Check Diag CMD
[23:14:12:135] : EMERGENCY Booting Mode
[23:14:12:135] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[23:14:12:151] : BS/P500/7Diuseppe\AppData\Local\Temp\DZ
[23:14:12:151] : WM_COPYDATA žÞœÃÁö ºž³¿ 0 - P500
[23:14:12:166] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:12:166] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:12:182] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:12:182] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:12:197] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:12:197] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:12:197] : NV Write Fail : NV ITEM 9028(9028)
[23:14:12:307] : >> GET DLOAD COMM MODE
[23:14:12:322] : [GetCommMode] Communication mode : 2
[23:14:12:322] : Pre Nand Download
[23:14:12:322] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[23:14:12:322] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - TRUSTED MODE
[23:14:12:338] : [COM11] >>NandFlashInitWithFile(PARTITION TBL)
[23:14:12:338] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - INIT PARTITION TBL
[23:14:17:267] : žÞœÃÁö ºž³¿ TYPE_WPARAM_WRITE_AMSS 15
[23:14:17:267] : [COM14] žÞœÃÁö ºž³¿ TYPE_WPARAM_WRITE_AMSS 15
[23:14:17:267] : [COM11] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[23:14:17:267] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - INIT AMSS MODEM HEADER
[23:14:17:283] : [COM14] >>Dl_AsyncWrite()
[23:14:17:283] : >> AMSS FLASHING ...
[23:14:17:283] : žÞœÃÁö ºž³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[23:14:17:283] : Sending Pkt Seq : 0
[23:14:17:283] : Sending Pkt Seq : 1
[23:14:17:283] : Sending Pkt Seq : 2
[23:14:17:283] : Sending Pkt Seq : 3
[23:14:17:283] : Sending Pkt Seq : 4
[23:14:17:283] : Sending Pkt Seq : 5
[23:14:17:283] : Sending Pkt Seq : 6
[23:14:17:283] : Sending Pkt Seq : 7
[23:14:17:283] : Sending Pkt Seq : 8
[23:14:17:283] : Sending Pkt Seq : 9
[23:14:17:283] : Sending Pkt Seq : 10
[23:14:17:283] : Sending Pkt Seq : 11
[23:14:17:283] : Sending Pkt Seq : 12
[23:14:17:283] : Sending Pkt Seq : 13
[23:14:17:283] : Sending Pkt Seq : 14
[23:14:17:283] : Sending Pkt Seq : 15
[23:14:17:283] : Sending Pkt Seq : 16
[23:14:17:283] : Sending Pkt Seq : 17
[23:14:17:283] : Sending Pkt Seq : 18
[23:14:17:283] : Sending Pkt Seq : 19
[23:14:17:283] : Sending Pkt Seq : 20
[23:14:17:283] : Sending Pkt Seq : 21
[23:14:17:283] : Sending Pkt Seq : 22
[23:14:17:283] : Sending Pkt Seq : 23
[23:14:17:283] : Sending Pkt Seq : 24
[23:14:17:299] : Dl_AsyncWrite - ErrNo(45), Addr(0x0000C600), NandErrNo(0x04)
[23:14:17:299] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[23:14:17:299] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - Close Port
[23:14:17:299] : Close Port<<
[23:14:17:299] : TYPE_WPARAM_UPGRADE_ERROR
[23:14:17:299] : žÞœÃÁö ºž³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[23:14:17:361] : Log finished
Click to expand...
Click to collapse
I've tried to reflash, but nothing happened even shaking the pc, then i've disconnected the phone and unplugged the battery pack. From that moment my phone is officially 'dead' no key combination seems to work, no usb connection, no signal.
Now what are your suggestions?
BACK + VOLUMEN UP + POWER... you can get EMERGENCY MODE... Then use KDZ
Stuck at fastboot mode Started udc start()
I was using
ROM : LG Icy Snap (4.0.4)
and wanted to update to 4.4.4 . Started the process normally .(i had previously tried the 4.4 kitkat by mukulsoni. which used the CWM 6..0.4 something like that)So updated my recovery .The recovery was fine but the volume buttons were not working so pressed the power button and i got a message saying that i would loose root access. i pulled out the battery and when i started it with the combo(Power+vol UP+ Home) i got the fastboot msg. i bricked my phone previously similarly but came out of it as my pc detected my mobile. Now it is not and when i try to launch that command to says waiting for device. Dunno what to do . I know LG P500 is a bit old but it is the only mobile i have :crying: .

LG P700 Emergency Mode?

Hello,
I have a LG p700 L7.
I wanted to do an update, and I do not know why but the phone is stuck on "emergency mode".
As soon as you start the phone, the screen yellow "emergency mode" appears.
And as it is impossible to install drrver "LG Mobile USB Modem", the phone is not recognized by any software.
Manipulation for Hard Reset I tried, does not work.
Can you help me please?
I did not find anything about it on XDA.
gomgom42 said:
Hello,
I have a LG p700 L7.
I wanted to do an update, and I do not know why but the phone is stuck on "emergency mode".
As soon as you start the phone, the screen yellow "emergency mode" appears.
And as it is impossible to install drrver "LG Mobile USB Modem", the phone is not recognized by any software.
Manipulation for Hard Reset I tried, does not work.
Can you help me please?
I did not find anything about it on XDA.
Click to expand...
Click to collapse
Please Help Me !
OK,we really can't help you until you tell us what exactly you did.You sound like you were thinking about an update and you found your phone in emergency mode.
SunnyChrono6 said:
OK,we really can't help you until you tell us what exactly you did.You sound like you were thinking about an update and you found your phone I. Emergency mode.
Click to expand...
Click to collapse
I wanted to update because my phone said me that an update was available. So I connected the phone to the computer, the software LG began updating. Once completed, the software shown me that everything was OK and that the update was completed successfully.
Unfortunately my phone it was stuck on this background yellow with "Emergency Mode!"
That's what happened
Was this when the phone was still connected to the computer or after you disconnected it?
SunnyChrono6 said:
Was this when the phone was still connected to the computer or after you disconnected it?
Click to expand...
Click to collapse
After I disconnected phone !
gomgom42 said:
After I disconnected phone !
Click to expand...
Click to collapse
Nobody know this problem ? And nobody expert too ?
Please...
gomgom42 said:
Nobody know this problem ? And nobody expert too ?
Please...
Click to expand...
Click to collapse
I'm waiting somebody can help me.. I don't know what can i do !
gomgom42 said:
I'm waiting somebody can help me.. I don't know what can i do !
Click to expand...
Click to collapse
Ok, nobody will help me...
So, i have a problem to install this driver : "LG Mobile USB Modem". That's why my PC don't recognize my LG Phone.
If i Can install this driver, i could install a new firmware. But I can't... Do you know why ??
I have the same problem. At the time of cwm installing, my phone rebooted on emergency mode yellow screen and cant open anymore. I use vol+ + power and the computer recognize my phone. I diasbled LGE modem and try to install v10A, V10C, v10g and v10h firmware every time it cant finish correctly and say
[R&D Test Tools Log File]
14:00:22 : Launching SW update
14:00:22 : Unpacking KDZ
14:00:37 : KDZ file extraced
14:00:43 : Files were extracted.
14:00:43 : LGMobileDL Load.
14:00:43 : Port = -1
14:00:43 : Connecting to phone
14:00:52 : Check Phone mode = 2
14:01:09 : Phone type check.......
14:01:15 : _DetachDLL Call
14:01:15 : _DetachDLL Call End
14:01:15 : Param : Path = D:\ProgramData\LGMOBILEAX\Phone\LGP705AT-00-V10c-TUR-XX-JUL-19-2012+0.dz
14:01:15 : Param : moduleDir =
14:01:15 : Param : waitTime = 0
14:01:15 : Param : UsbHighSpeed = 1
14:01:15 : Param : PhoneMode = 2
14:01:15 : Param : BinVersion = V10C_00
14:01:15 : Param : AuthMark = 0
14:01:15 : Call fn_StartUpgrade
14:01:15 : CDMA: wParam = 206, lParam = 0
14:01:15 : Model Dll Msg Not Found(206, 0)
upgrade error wParam:100 lParam: 1002
how can I fix this problem
drberkantkaya said:
I have the same problem. At the time of cwm installing, my phone rebooted on emergency mode yellow screen and cant open anymore. I use vol+ + power and the computer recognize my phone. I diasbled LGE modem and try to install v10A, V10C, v10g and v10h firmware every time it cant finish correctly and say
[R&D Test Tools Log File]
14:00:22 : Launching SW update
14:00:22 : Unpacking KDZ
14:00:37 : KDZ file extraced
14:00:43 : Files were extracted.
14:00:43 : LGMobileDL Load.
14:00:43 : Port = -1
14:00:43 : Connecting to phone
14:00:52 : Check Phone mode = 2
14:01:09 : Phone type check.......
14:01:15 : _DetachDLL Call
14:01:15 : _DetachDLL Call End
14:01:15 : Param : Path = D:\ProgramData\LGMOBILEAX\Phone\LGP705AT-00-V10c-TUR-XX-JUL-19-2012+0.dz
14:01:15 : Param : moduleDir =
14:01:15 : Param : waitTime = 0
14:01:15 : Param : UsbHighSpeed = 1
14:01:15 : Param : PhoneMode = 2
14:01:15 : Param : BinVersion = V10C_00
14:01:15 : Param : AuthMark = 0
14:01:15 : Call fn_StartUpgrade
14:01:15 : CDMA: wParam = 206, lParam = 0
14:01:15 : Model Dll Msg Not Found(206, 0)
upgrade error wParam:100 lParam: 1002
how can I fix this problem
Click to expand...
Click to collapse
You can try disabling this screen pressing Power button, Low Volume/High Volume (I don´t remember, but I think it´s Low button) and the Home screen button at the same time. If the screens get´s black, but after release it backs to the yellow screen, you guys will need to flash the phone again. Download the lastest firmwares for P700/P705 here: http://lg-phone-firmware.com/index.php?id_mod=13
Make sure your phones aren´t F or G variants, because my phone is internacional and I´m brazillian, so, when I try to flash a brazillian ROM, the phone simply get stuck on LG logo. Use KDZ to flash this, If the error persists, use another KDZ file, with another firmware, or another country.
---------- Post added at 01:09 PM ---------- Previous post was at 01:00 PM ----------
I saw that you setted the type to CDMA, and that´s wrong. Try to flash on 3GQCT option.
Junior...também sou brasileira e meu lg também é importado. No caso, quando for baixar a firmware, eu baixo mesmo assim a do Brasil e depois uso o KDZ pra tirar do logo da LG é? Por favor...preciso de ajuda.
Junior...I'm brazilian and my phone is internacional too. So, when i downloaded the firmware, i have to download the brazilian firmware then i use KDZ to fix the error with the LG logo? Pleaseeee..i need help
You cant flash a p705f firmware on a p700/p705 cell Phone. Brazil does have a diferent model for optimus L7 (p705f). My LG is imported too, so I cant flash a brazillian firmware because it doesnt works on another l7 models, i dont know why. But you can flash a P700 firmware on a p705, and vice versa.
Sent from my LG-P700 using xda app-developers app

Stuck on the emergencymode yellow screen

LG Optimus T - blue
My phone is stuck in the emergency mode with the yellow screen.
Ill take you through what happened,
I wanted to update to 2.3.3, so i downloaded kdz updater and followed the tutorial on how to do so, I downloaded the ROM that i was told to download and I initiated XDA updater with the right type (3gqct) and phone mode (diag)--- right off the bat i got an error message on the program and the phone went to the emergency mode screen. I retried a good 5-7 times...nothing.
I looked around and people said to flash back to original ROM (2.2.2) and i tried that with the right stuff selected(3gqct) and emergency instead of the "diag"...but nothing.
I looked around and i have yet to find anything that can help, I cant hard reset it or any type of reset. the kdz program isnt working with any combo of steps...
I'm lost please help! I just got this phone yesterday and thought i would be doing some good updating it. But now im back to my blackberry.
Here's the Log Report:
[15:51:32:927] : =============================================
[15:51:32:927] : Log is started on 01.10.2012, at 15:51:32:927,
executable: C:\Users\Chad Kantlehner\Desktop\Android Crap\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00000bac),
compile time : Dec 8 2010 09:19:37
[15:51:32:927] : Version :
[15:51:32:937] : Get Usb Port
[15:51:32:937] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM3)
[15:51:32:937] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[15:51:32:937] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM3
[15:51:32:937] : Port = COM3
[15:51:32:957] : UNKNOWN : Req(12) -> Rsp(13)
[15:51:32:967] : UNKNOWN : Req(12) -> Rsp(13)
[15:51:32:977] : UNKNOWN : Req(12) -> Rsp(13)
[15:51:32:977] : >> DIAG_STATUS_F FAILED
[15:51:32:987] : >>Get Model Name [DIAG_VERNO_F]
[15:51:32:997] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:51:33:007] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:51:33:017] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:51:33:027] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:51:33:037] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:51:33:047] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:51:33:047] : FAIL (No Phone)
[15:51:33:047] : GetModelName() Operation Failed Check Diag CMD
[15:51:33:047] : EMERGENCY Booting Mode
[15:51:33:047] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[15:51:33:057] : BS/P504/7DHADKA~1\AppData\Local\Temp\DZ
[15:51:33:057] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P504
[15:51:33:067] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[15:51:33:067] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[15:51:33:077] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[15:51:33:077] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[15:51:33:087] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[15:51:33:087] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[15:51:33:087] : NV Write Fail : NV ITEM 9028(9028)
[15:51:33:187] : >> GET DLOAD COMM MODE
[15:51:33:197] : [GetCommMode] Communication mode : 2
[15:51:33:197] : Pre Nand Download
[15:51:33:197] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[15:51:33:197] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[15:51:33:207] : [COM3] >>NandFlashInitWithFile(PARTITION TBL)
[15:51:33:207] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[15:51:33:227] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[15:51:33:227] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[15:51:33:227] : [COM3] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[15:51:33:257] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[15:51:33:267] : [COM14] >>Dl_AsyncWrite()
[15:51:33:267] : >> AMSS FLASHING ...
[15:51:33:267] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[15:51:33:267] : Sending Pkt Seq : 0
[15:51:33:267] : Sending Pkt Seq : 1
[15:51:33:267] : Sending Pkt Seq : 2
[15:51:33:267] : Sending Pkt Seq : 3
[15:51:33:267] : Sending Pkt Seq : 4
[15:51:33:267] : Sending Pkt Seq : 5
[15:51:33:267] : Sending Pkt Seq : 6
[15:51:33:267] : Sending Pkt Seq : 7
[15:51:33:267] : Sending Pkt Seq : 8
[15:51:33:267] : Sending Pkt Seq : 9
[15:51:33:287] : Dl_AsyncWrite - ErrNo(45), Addr(0x00004800), NandErrNo(0x04)
[15:51:33:287] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[15:51:33:287] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[15:51:33:287] : Close Port<<
[15:51:33:287] : TYPE_WPARAM_UPGRADE_ERROR
[15:51:33:287] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[15:51:33:367] : Log finished
First, it‘s called KDZ Updater and not XDA Updater
Second:
Windows:
Uninstall all drivers, reboot, reinstall them, reboot, deactivate LG USB Moden in Device manager (Systempanel)
Now try again. If it won‘t work either, reboot your phone and take out battery, unplug and plug in it again and repeat until it works
Btw, welcome to XDA
Edit: Now you have the log. It seems like it can not recognise your phone. Don‘t use USB HUB or something else.
DarkCoding said:
First, it‘s called KDZ Updater and not XDA Updater
Second:
Windows:
Uninstall all drivers, reboot, reinstall them, reboot, deactivate LG USB Moden in Device manager (Systempanel)
Now try again. If it won‘t work either, reboot your phone and take out battery, unplug and plug in it again and repeat until it works
Btw, welcome to XDA
Edit: Now you have the log. It seems like it can not recognise your phone. Don‘t use USB HUB or something else.
Click to expand...
Click to collapse
Lol i realized that when i was rereading it a while after iposted it.
but i did what you said and still, no results. I still have the yellow screen with emergency mode typed on it. Its not in a hub, connected directly to my laptop. and i forgot to out in the post that the only way for the pc to recognize the phone is to pull and keep the battery out of the phone while i am attempting to do stuff.
any other ideas... please iwould like to get this thing working with either ROM

LG p700 L7 stuck in emergency mode brick ?

I have the same problem. At the time of cwm installing, my phone rebooted on emergency mode yellow screen and cant open anymore. I use vol+ + power and the computer recognize my phone. I diasbled LGE modem and try to install v10A, V10C, v10g and v10h firmware every time it cant finish correctly and say
[R&D Test Tools Log File]
14:00:22 : Launching SW update
14:00:22 : Unpacking KDZ
14:00:37 : KDZ file extraced
14:00:43 : Files were extracted.
14:00:43 : LGMobileDL Load.
14:00:43 : Port = -1
14:00:43 : Connecting to phone
14:00:52 : Check Phone mode = 2
14:01:09 : Phone type check.......
14:01:15 : _DetachDLL Call
14:01:15 : _DetachDLL Call End
14:01:15 : Param : Path = D:\ProgramData\LGMOBILEAX\Phone\LGP705AT-00-V10c-TUR-XX-JUL-19-2012+0.dz
14:01:15 : Param : moduleDir =
14:01:15 : Param : waitTime = 0
14:01:15 : Param : UsbHighSpeed = 1
14:01:15 : Param : PhoneMode = 2
14:01:15 : Param : BinVersion = V10C_00
14:01:15 : Param : AuthMark = 0
14:01:15 : Call fn_StartUpgrade
14:01:15 : CDMA: wParam = 206, lParam = 0
14:01:15 : Model Dll Msg Not Found(206, 0)
upgrade error wParam:100 lParam: 1002
how can I fix this problem
Did You try revert to original recovery with fastboot command?
Sent from my LG-P700 using xda app-developers app
How I can do this can you explain me. About 1 week more than 50 hours I try to solve problem but I cant do this. I downloaded android sdk and I try to start comannd
d:\andorid-sdk\platform-tools\fastboot oem unlock enter
but it cant find my LG p700
I connect my phone with vol+ and power buttun clicking and install usb drivers after that I disable lg modem and open update tool and costumer support recıver my phone, enter imei say ok , go to update program after waiting it says " pdater not possible due to fatal error, while the LG Mobile Phone Software Update"
I used a lot of buttun combinations to go cwm but it always stuck in yellow screen emergency mode. I need your helps however I will be carzy, I have a big headache
thank you so much
drberkantkaya said:
How I can do this can you explain me. About 1 week more than 50 hours I try to solve problem but I cant do this. I downloaded android sdk and I try to start comannd
d:\andorid-sdk\platform-tools\fastboot oem unlock enter
but it cant find my LG p700
I connect my phone with vol+ and power buttun clicking and install usb drivers after that I disable lg modem and open update tool and costumer support recıver my phone, enter imei say ok , go to update program after waiting it says " pdater not possible due to fatal error, while the LG Mobile Phone Software Update"
I used a lot of buttun combinations to go cwm but it always stuck in yellow screen emergency mode. I need your helps however I will be carzy, I have a big headache
thank you so much
Click to expand...
Click to collapse
1. Reinstall drivers
2. Use uptestex_mod2_marwin.exe (no 2nd one)
ryba84 said:
Did You try revert to original recovery with fastboot command?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
I got the same problem now Can you tell me step by step what I have to do?
[R&D Test Tools Log File]
00:12:23 : Launching SW update
00:12:23 : Unpacking KDZ
00:12:25 : KDZ file extraced
00:12:27 : Files were extracted.
00:12:27 : LGMobileDL Load.
00:12:27 : Port = -1
00:12:27 : Connecting to phone
00:12:37 : Check Phone mode = 2
00:12:53 : Phone type check.......
00:12:55 : _DetachDLL Call
00:12:55 : _DetachDLL Call End
00:12:55 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-00-V20d-262-000-MAY-02-2013+0.dz
00:12:55 : Param : moduleDir =
00:12:55 : Param : waitTime = 0
00:12:55 : Param : UsbHighSpeed = 1
00:12:55 : Param : PhoneMode = 2
00:12:55 : Param : BinVersion = V20D_00
00:12:55 : Param : AuthMark = 0
00:12:55 : Call fn_StartUpgrade
00:12:55 : CDMA: wParam = 206, lParam = 0
00:12:55 : Model Dll Msg Not Found(206, 0)

mtk6737 baseband unknown and imei blank..how to repair

my phone model- CENTRIC CM2221
android -6.0
problem- no service
i check imei blank and baseband unknown .
how to solve ?
please provide me stock rom or good solution ..
Phone Info Log .........
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 16 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333238E8020042AF2EBAF4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D420002E8F4BA73AF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xEF0B331D1BA71095953C8F7CFAA875FB
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
You cm2 to Repaire baseband
Sent from my iPhone using Tapatalk Pro
abuk91 said:
You cm2 to Repaire baseband
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
bro allready try but not done .....need flash file
no solution????????????????????????????????????????????????????????????
I have the same problem
phone accent neon no service imei not found
I'm looking for rom file for this model

Categories

Resources