Database Info

[Q] how to recover a bricked lg optimus p500 which is 'not' detecting by pc

mine is an rooted lg optimus p500 with stock gingerbread 2.3.3 ,firmware v20c for india.last day i installed rom manager trail,when i tried to back up current rom,the phone gone off,now it is strucked at lg logo.i tried kdz for installing another stock rom.but it says phone is not connected. i checked through adb,when typing command 'adb shell' it also says no devices found.hard reseting is not working,no emergency mode. what to do??? pls help me.

Did u flash recovery first before hitting backup current rom? If you are getting LG logo then u should get emergency mode. Press volume up button+return key + connect the usb cable connected to your PC all at the same time. http://forum.xda-developers.com/showthread.php?t=883314 Read this. it will help u.

reinstall drivers.
let your phone be on (stuck at lg logo), connect to computer, flash custom recovery from lgmdp.
There might errors occur at nv backup or nv restore but it will flash recovery.

sweettaniyaa said:
Did u flash recovery first before hitting backup current rom? If you are getting LG logo then u should get emergency mode. Press volume up button+return key + connect the usb cable connected to your PC all at the same time. http://forum.xda-developers.com/showthread.php?t=883314 Read this. it will help u.
Click to expand...
Click to collapse
thnks. phone recovered. then how to back up current rom using rom manger????.do i want to flash recovery first.??

phone not even starting
hi everyone,
i tried to update the firmware on my op1 p500.it came to emergency mode,but after this some error occured and kdz updater showed 'c drive erased'
and now my phone is not even starting.
it is in warranty,but i dnt knw wat reason i can tell at the service center,that wat happened to the phone.
Plz help.

farzii said:
hi everyone,
i tried to update the firmware on my op1 p500.it came to emergency mode,but after this some error occured and kdz updater showed 'c drive erased'
and now my phone is not even starting.
it is in warranty,but i dnt knw wat reason i can tell at the service center,that wat happened to the phone.
Plz help.
Click to expand...
Click to collapse
If the phone can't boot, then it's alright. Easy. Something like "I switched it off before I went to sleep and the next morning I couldn't turn it on" should do the trick
Sent from my LG-P500 using xda premium

farzii said:
hi everyone,
i tried to update the firmware on my op1 p500.it came to emergency mode,but after this some error occured and kdz updater showed 'c drive erased'
and now my phone is not even starting.
it is in warranty,but i dnt knw wat reason i can tell at the service center,that wat happened to the phone.
Plz help.
Click to expand...
Click to collapse
Just say when you are updating firmware it had an error and your phone would not start up.

Lg bricked
I've got a similar problem;
Rom manager crashed my phone (lg p500) when i was trying to back-up the original rom. The Phone booted in <b> fastboot mode </b>, i've followed the guide your guide to recover, but the phone crashed and even the fastboot mode disappeared. After a long research i've found the kdz 'ultima ratio' system, i've started the phone to <b> emergency mode </b> followed all the procedure (shaking included) trying to flash my phone to V10C.kdz, the result was
[23:14:11:932] : =============================================
[23:14:11:932] : Log is started on 06.03.2012, at 23:14:11:932,
executable: C:\Users\giuseppe\Desktop\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00000810),
compile time : May 24 2011 11:19:45
[23:14:11:932] : Version :
[23:14:11:932] : Get Usb Port
[23:14:11:979] : rsi.strFriendlyName=Porta di comunicazione (COM1)
[23:14:11:979] : Remove Porta di comunicazione (COM1)
[23:14:11:979] : rsi.strFriendlyName=LGE Bluetooth TransPort (COM4)
[23:14:11:979] : Remove LGE Bluetooth TransPort (COM4)
[23:14:11:979] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM11)
[23:14:11:979] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[23:14:11:979] : WM_COPYDATA žÞœÃÁö ºž³¿ 1 - COM11
[23:14:11:979] : Port = COM11
[23:14:11:995] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:12:010] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:12:026] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:12:026] : >> DIAG_STATUS_F FAILED
[23:14:12:041] : >>Get Model Name [DIAG_VERNO_F]
[23:14:12:057] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:073] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:088] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:104] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:119] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:135] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:135] : FAIL (No Phone)
[23:14:12:135] : GetModelName() Operation Failed Check Diag CMD
[23:14:12:135] : EMERGENCY Booting Mode
[23:14:12:135] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[23:14:12:151] : BS/P500/7Diuseppe\AppData\Local\Temp\DZ
[23:14:12:151] : WM_COPYDATA žÞœÃÁö ºž³¿ 0 - P500
[23:14:12:166] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:12:166] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:12:182] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:12:182] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:12:197] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:12:197] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:12:197] : NV Write Fail : NV ITEM 9028(9028)
[23:14:12:307] : >> GET DLOAD COMM MODE
[23:14:12:322] : [GetCommMode] Communication mode : 2
[23:14:12:322] : Pre Nand Download
[23:14:12:322] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[23:14:12:322] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - TRUSTED MODE
[23:14:12:338] : [COM11] >>NandFlashInitWithFile(PARTITION TBL)
[23:14:12:338] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - INIT PARTITION TBL
[23:14:17:267] : žÞœÃÁö ºž³¿ TYPE_WPARAM_WRITE_AMSS 15
[23:14:17:267] : [COM14] žÞœÃÁö ºž³¿ TYPE_WPARAM_WRITE_AMSS 15
[23:14:17:267] : [COM11] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[23:14:17:267] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - INIT AMSS MODEM HEADER
[23:14:17:283] : [COM14] >>Dl_AsyncWrite()
[23:14:17:283] : >> AMSS FLASHING ...
[23:14:17:283] : žÞœÃÁö ºž³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[23:14:17:283] : Sending Pkt Seq : 0
[23:14:17:283] : Sending Pkt Seq : 1
[23:14:17:283] : Sending Pkt Seq : 2
[23:14:17:283] : Sending Pkt Seq : 3
[23:14:17:283] : Sending Pkt Seq : 4
[23:14:17:283] : Sending Pkt Seq : 5
[23:14:17:283] : Sending Pkt Seq : 6
[23:14:17:283] : Sending Pkt Seq : 7
[23:14:17:283] : Sending Pkt Seq : 8
[23:14:17:283] : Sending Pkt Seq : 9
[23:14:17:283] : Sending Pkt Seq : 10
[23:14:17:283] : Sending Pkt Seq : 11
[23:14:17:283] : Sending Pkt Seq : 12
[23:14:17:283] : Sending Pkt Seq : 13
[23:14:17:283] : Sending Pkt Seq : 14
[23:14:17:283] : Sending Pkt Seq : 15
[23:14:17:283] : Sending Pkt Seq : 16
[23:14:17:283] : Sending Pkt Seq : 17
[23:14:17:283] : Sending Pkt Seq : 18
[23:14:17:283] : Sending Pkt Seq : 19
[23:14:17:283] : Sending Pkt Seq : 20
[23:14:17:283] : Sending Pkt Seq : 21
[23:14:17:283] : Sending Pkt Seq : 22
[23:14:17:283] : Sending Pkt Seq : 23
[23:14:17:283] : Sending Pkt Seq : 24
[23:14:17:299] : Dl_AsyncWrite - ErrNo(45), Addr(0x0000C600), NandErrNo(0x04)
[23:14:17:299] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[23:14:17:299] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - Close Port
[23:14:17:299] : Close Port<<
[23:14:17:299] : TYPE_WPARAM_UPGRADE_ERROR
[23:14:17:299] : žÞœÃÁö ºž³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[23:14:17:361] : Log finished
Click to expand...
Click to collapse
I've tried to reflash, but nothing happened even shaking the pc, then i've disconnected the phone and unplugged the battery pack. From that moment my phone is officially 'dead' no key combination seems to work, no usb connection, no signal.
Now what are your suggestions?

BACK + VOLUMEN UP + POWER... you can get EMERGENCY MODE... Then use KDZ

Stuck at fastboot mode Started udc start()
I was using
ROM : LG Icy Snap (4.0.4)
and wanted to update to 4.4.4 . Started the process normally .(i had previously tried the 4.4 kitkat by mukulsoni. which used the CWM 6..0.4 something like that)So updated my recovery .The recovery was fine but the volume buttons were not working so pressed the power button and i got a message saying that i would loose root access. i pulled out the battery and when i started it with the combo(Power+vol UP+ Home) i got the fastboot msg. i bricked my phone previously similarly but came out of it as my pc detected my mobile. Now it is not and when i try to launch that command to says waiting for device. Dunno what to do . I know LG P500 is a bit old but it is the only mobile i have :crying: .

[Q] P500 permanent Emergency Mode!!!

Hi everyone! I need your help.
I tried to make a downgrade for my P500 from 2.3.3. to 2.2.2(with V10D_00.kdz). I used KDZ_FW_UPD this.
First time i get an error on finish of proccess.
Second try i take a message in log:
Code:
13:47:10 : PHONE IS NOT FOUND!!!
After all i have a permanent [Emergency Mode] on startup.
What i'm done:
- Turn off Firewall and antivirus
- Use different USB ports
- Run KDZ_FW_UPD with admin rights.
- Download and install latest USB and other LG Drivers
- Tried to make it on XP, WIN7, Win8.
- On different PC.
- Turned OFF LG Virtual USB modem - the same.
First try log:
Code:
00:24:18 : Запуск обновления ПО
00:24:18 : Распаковка KDZ
00:25:06 : KDZ файл распакован
00:25:08 : Файлы извлечены .
00:25:08 : LGMobileDL Load.
00:25:08 : Порт = -1
00:25:08 : Соединение с телефоном
00:25:18 : Check Phone mode = 1
00:25:36 : Phone type check.......
00:25:41 : LGMobileDL.DLL Loading....
00:25:41 : _SetAuthMark Fail
00:25:41 : AuthMark°Ў Б¤И®Ич PhoneїЎ Write µЗБц ѕКѕТЅАґПґЩ!
00:25:41 : _SetAuthMark Fail
00:25:41 : LoadCDMAPhoneData() Error
00:25:41 : _DetachDLL Call
00:25:41 : _DetachDLL Call End
00:25:41 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP698AT-00-V10d-CIS-XXX-MAY-17-2012+0.dz
00:25:41 : Param : moduleDir =
00:25:41 : Param : waitTime = 0
00:25:41 : Param : UsbHighSpeed = 1
00:25:41 : Param : PhoneMode = 1
00:25:41 : Param : BinVersion = V10D_00
00:25:41 : Param : AuthMark = 0
00:25:41 : Call fn_StartUpgrade
00:26:32 : Smart : wParam = 4, lParam = 0
00:27:23 : Smart : wParam = 15, lParam = 0
00:27:23 : Smart : wParam = 205, lParam = 0
00:27:23 : Smart : wParam = 100, lParam = 4008
00:27:23 : Step : Upgrade Error error code = 4008
00:27:23 : ResetStartInfo() Call
00:27:23 : _DetachDLL Call
00:27:23 : _DetachDLL Call End
00:27:23 : FreeLibrary Call
00:27:23 : FreeLibrary Call End
00:27:23 : ResetStartInfo() Call End
00:27:24 : ===ЗАВЕРШЕНО===
00:29:21 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
I don't know what to do to bring back my phone in normal status.
May be you can help me?
P.S. Sorry for my English.

This article should help you out: http://www.ijailbroken.com/how-to-fix-emergency-mode-loop-on-lg-p500-optimus-one/

LG p700 L7 stuck in emergency mode brick ?

I have the same problem. At the time of cwm installing, my phone rebooted on emergency mode yellow screen and cant open anymore. I use vol+ + power and the computer recognize my phone. I diasbled LGE modem and try to install v10A, V10C, v10g and v10h firmware every time it cant finish correctly and say
[R&D Test Tools Log File]
14:00:22 : Launching SW update
14:00:22 : Unpacking KDZ
14:00:37 : KDZ file extraced
14:00:43 : Files were extracted.
14:00:43 : LGMobileDL Load.
14:00:43 : Port = -1
14:00:43 : Connecting to phone
14:00:52 : Check Phone mode = 2
14:01:09 : Phone type check.......
14:01:15 : _DetachDLL Call
14:01:15 : _DetachDLL Call End
14:01:15 : Param : Path = D:\ProgramData\LGMOBILEAX\Phone\LGP705AT-00-V10c-TUR-XX-JUL-19-2012+0.dz
14:01:15 : Param : moduleDir =
14:01:15 : Param : waitTime = 0
14:01:15 : Param : UsbHighSpeed = 1
14:01:15 : Param : PhoneMode = 2
14:01:15 : Param : BinVersion = V10C_00
14:01:15 : Param : AuthMark = 0
14:01:15 : Call fn_StartUpgrade
14:01:15 : CDMA: wParam = 206, lParam = 0
14:01:15 : Model Dll Msg Not Found(206, 0)
upgrade error wParam:100 lParam: 1002
how can I fix this problem

Did You try revert to original recovery with fastboot command?
Sent from my LG-P700 using xda app-developers app

How I can do this can you explain me. About 1 week more than 50 hours I try to solve problem but I cant do this. I downloaded android sdk and I try to start comannd
d:\andorid-sdk\platform-tools\fastboot oem unlock enter
but it cant find my LG p700
I connect my phone with vol+ and power buttun clicking and install usb drivers after that I disable lg modem and open update tool and costumer support recıver my phone, enter imei say ok , go to update program after waiting it says " pdater not possible due to fatal error, while the LG Mobile Phone Software Update"
I used a lot of buttun combinations to go cwm but it always stuck in yellow screen emergency mode. I need your helps however I will be carzy, I have a big headache
thank you so much

drberkantkaya said:
How I can do this can you explain me. About 1 week more than 50 hours I try to solve problem but I cant do this. I downloaded android sdk and I try to start comannd
d:\andorid-sdk\platform-tools\fastboot oem unlock enter
but it cant find my LG p700
I connect my phone with vol+ and power buttun clicking and install usb drivers after that I disable lg modem and open update tool and costumer support recıver my phone, enter imei say ok , go to update program after waiting it says " pdater not possible due to fatal error, while the LG Mobile Phone Software Update"
I used a lot of buttun combinations to go cwm but it always stuck in yellow screen emergency mode. I need your helps however I will be carzy, I have a big headache
thank you so much
Click to expand...
Click to collapse
1. Reinstall drivers
2. Use uptestex_mod2_marwin.exe (no 2nd one)

ryba84 said:
Did You try revert to original recovery with fastboot command?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
I got the same problem now Can you tell me step by step what I have to do?
[R&D Test Tools Log File]
00:12:23 : Launching SW update
00:12:23 : Unpacking KDZ
00:12:25 : KDZ file extraced
00:12:27 : Files were extracted.
00:12:27 : LGMobileDL Load.
00:12:27 : Port = -1
00:12:27 : Connecting to phone
00:12:37 : Check Phone mode = 2
00:12:53 : Phone type check.......
00:12:55 : _DetachDLL Call
00:12:55 : _DetachDLL Call End
00:12:55 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-00-V20d-262-000-MAY-02-2013+0.dz
00:12:55 : Param : moduleDir =
00:12:55 : Param : waitTime = 0
00:12:55 : Param : UsbHighSpeed = 1
00:12:55 : Param : PhoneMode = 2
00:12:55 : Param : BinVersion = V20D_00
00:12:55 : Param : AuthMark = 0
00:12:55 : Call fn_StartUpgrade
00:12:55 : CDMA: wParam = 206, lParam = 0
00:12:55 : Model Dll Msg Not Found(206, 0)

My p500 got hard brick

Some 1 plz help me
while flashing with WP7 mango tango my phone got bricked firs it loss its signals ,so i flashed it wit iosdroid then also it shows the same problem....after this i seek some helps from my friends they tell me to flash the kernel so i done so... nw it have no menu no signal and nothing plz help me soon i dnt have any oter phone plz hel me to unbrick it.I tried so many ways but nthng is effective plsssss help me sooooooon

Doesn't the phone turn on?
Just flash a new baseband
my :tank: has blown your house up

Boot to recovery, flash the rom and then flash the old bb fix. Seems you are on old bb and the rom is for the new bb. Were you on froyo 2.2 when you flashed the mango tango rom?
Sent from my LG-P500

Flash oldbb fix after complete wipe
Sent from my LG-P690 using xda premium

rijukrishnan said:
Some 1 plz help me
while flashing with WP7 mango tango my phone got bricked firs it loss its signals ,so i flashed it wit iosdroid then also it shows the same problem....after this i seek some helps from my friends they tell me to flash the kernel so i done so... nw it have no menu no signal and nothing plz help me soon i dnt have any oter phone plz hel me to unbrick it.I tried so many ways but nthng is effective plsssss help me sooooooon
Click to expand...
Click to collapse
Can you see LG logo on your phone or can you connect it to computer in emergency mode. If either of this is true than your phone is not hard bricked. Its just a soft brick and can be resolved easily.
So can you tell us the exact status of your device. So that others can help you.

Yes I can connect it in emergency mode it shows startup screen an unlock screen but no signal and menu can I fix it via kdz updater

This is not a hard brick. A hard brick is when the device no longer turns on
I'M BATMAN

Wat to do next.
Sent from my SHW-M250S using xda app-developers app

rijukrishnan said:
Yes I can connect it in emergency mode it shows startup screen an unlock screen but no signal and menu can I fix it via kdz updater
Click to expand...
Click to collapse
Sent from my SHW-M250S using xda app-developers app

how can i fix dis prblm ........ plz discribe in detail .. am a nube in this field
Sent from my SHW-M250S using xda app-developers app

Which custom recovery are you using?
Sent from my LG-P500

Amonra
Sent from my SHW-M250S using xda app-developers app

Can you boot into recovery? If you can, flash a rom (clean flash with all wipes ). Try hephappy's 9.2.1 or cyberics 3.0. Boot into the rom and check your bb. If it says v10 its old bb. Flash the old bb fix. If it is 20, you are on new bb and no need to flash the fix. You should get network back.
Sent from my LG-P500

Yes try kdz updater or lgmdp to flash official firmware. Then root again, flash custom recovery and then any custom rom you like.
But don't remove your battery during flashing or interrupt the process as it can hard brick your phone.
Sent from my LG-P500

Hey can u help me via FB
Sent from my SHW-M250S using xda app-developers app

This is the exact situation of my phon
Sent from my SHW-M250S using xda app-developers app

Sent from my SHW-M250S using xda app-developers app

Have you tried reboot into recovery,clean all cache, dalvik, data, system and then re-flash the rom? Try an ics rom as its newer and almost nil bugs.
Sent from my LG-P500

p500 stuck at booting
[16:44:00:378] : =============================================
[16:44:00:378] : Log is started on 28.04.2013, at 16:44:00:378,
executable: C:\Users\user\Desktop\riju files\kdz-udpate\KDZ_FW_UPD.exe (ProcID: 0x00000c64),
compile time : Dec 8 2010 09:19:37
[16:44:00:379] : Version :
[16:44:00:398] : Get Usb Port
[16:44:00:404] : rsi.strFriendlyName=Communications Port (COM1)
[16:44:00:404] : Remove Communications Port (COM1)
[16:44:00:404] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM5)
[16:44:00:404] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[16:44:00:404] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM5
[16:44:00:404] : Port = COM5
[16:44:00:416] : UNKNOWN : Req(12) -> Rsp(13)
[16:44:00:417] : UNKNOWN : Req(12) -> Rsp(13)
[16:44:00:418] : UNKNOWN : Req(12) -> Rsp(13)
[16:44:00:418] : >> DIAG_STATUS_F FAILED
[16:44:00:423] : >>Get Model Name [DIAG_VERNO_F]
[16:44:00:424] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:425] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:426] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:427] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:428] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:429] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:44:00:429] : FAIL (No Phone)
[16:44:00:429] : GetModelName() Operation Failed Check Diag CMD
[16:44:00:429] : EMERGENCY Booting Mode
[16:44:00:429] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[16:44:00:430] : BS/P500/7D
[16:44:00:430] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[16:44:00:441] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[16:44:00:441] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[16:44:00:442] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[16:44:00:442] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[16:44:00:443] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[16:44:00:443] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[16:44:00:443] : NV Write Fail : NV ITEM 9028(9028)
[16:44:00:543] : >> GET DLOAD COMM MODE
[16:44:00:544] : [GetCommMode] Communication mode : 2
[16:44:00:544] : Pre Nand Download
[16:44:00:544] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[16:44:00:544] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[16:44:00:545] : [COM5] >>NandFlashInitWithFile(PARTITION TBL)
[16:44:00:545] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[16:44:00:647] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[16:44:00:647] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[16:44:00:647] : [COM5] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[16:44:00:662] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[16:44:00:673] : [COM14] >>Dl_AsyncWrite()
[16:44:00:673] : >> AMSS FLASHING ...
[16:44:00:675] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
16:44:15:377] : RX Timeout : 3.0 seconds
[16:44:15:377] : RX TIMEOUT
[16:44:18:387] : RX Timeout : 3.0 seconds
[16:44:18:387] : RX TIMEOUT
[16:44:21:398] : RX Timeout : 3.0 seconds
[16:44:21:398] : RX TIMEOUT
[16:44:21:398] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[16:44:21:398] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[16:44:21:398] : Close Port<<
[16:44:21:398] : TYPE_WPARAM_UPGRADE_ERROR
[16:44:21:398] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 5
[16:44:21:431] : Log finished
after this show only a black screen only and a cmnd Fast boot started

Thanx for all helps my fon got life back
Sent from my GT-S5360 using xda app-developers app

MBW vodacom kicka 4 plus won't boot , what could be the problem

What could be the problem ..
Operation : Identify [ v2.18 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : MEID : 84E1311723E5F72DDF767B7B831BD757
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SP.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 45000170414934456E0101344F2524D7
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 70010045453449413401016ED724254F
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
DRAM : 0x0178
EMI : DEV : MT6752
EMI : SRC : preloader_k80hd_bsp_fwv_512m.bin
EMI : CNT : 0003
EMI : [00] : ID : 700100454534454134 : VEN : KINGSTON | DEV : EE4EA4 : RAM : [ 512.00 MB ]
EMI : [01] : ID : C80111344D45594D41 : VEN : UNKNOWN | DEV : 4MEYMA : RAM : [ 512.00 MB ]
EMI : [02] : ID : 700100454534494134 : VEN : KINGSTON | DEV : EE4IA4 : RAM : [ 512.00 MB ]
EMI : Init EMI from PRELOADER
INIT : 0xBC : DRAM [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x20000000 [ 512.00 MB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info
EMMC: 70010045453449413401016ED724254F
EMMC: VEN : KINGSTON | OEM : 01 | DEV : EE4IA4
EMMC:
BOOT1 : 0x00200000 [ 2.00 MB ]
BOOT2 : 0x00200000 [ 2.00 MB ]
RPMB : 0x00080000 [ 512.00 KB ]
USER : 0xE2000000 [ 3.53 GB ]
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : C936D9FF3A84D90E7B2010FA5212EA26
STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT
DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Boot done!
Patch Level : O11019
Display ID : O11019 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-09-05
Build Time : 23.08.2019
Product Model : Kicka_4_Plus
Product Brand : MobiWire
Product Name : Kicka_4_Plus
Product Device : Kicka_4_Plus
Product Manfct : MobiWire
Product Info : k80hd_bsp_fwv_512m
Board Platform : mt6580
Product Board : VP402_Mobiwire_Kicka4Plus
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
Done!
Elapsed: 00:00:30
Operation : HW Test [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 1 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2018-04-25.11:26_437806
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 70010045453449413401016ED724254F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 4AI4E
[eMMC] : FLASH_CID : 70010045453449413401016ED724254F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E2000000
[eMMC] : FLASH_UCP : 3616 MiB [eMMC 4 GiB]
DEV RID : 0x4EA014B2FFD936C90ED9843AFA10207B
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Processing Miscellaneous test
MSC : BatteryLevel : 3009 mV
[Processing] FlashMemory Read-Write test
[eMMC] : [KINGSTON] , 4AI4E , 0xE2000000 , 3616 MiB
[eMMC] : CID : 70010045453449413401016ED724254F
[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!
[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!
[Processing] RAM Read-Write test
[DRAM] : 0x20000000 , 512 MiB
[DRAM] : ADDRESS BUS test
[PASSED] : Bus Count : 0x1C
[DRAM] : DATA BUS test
[PASSED] : Bus Count : 0x1F
[DRAM] : PATTERN test
[PASSED] : PATTERN Ok
[DRAM] : INCDEC test
[PASSED] : INCDEC Ok
All Done!
Done!
Elapsed: 00:01:40
Reconnect Power/Cable!