I've asked this question here before, and it seems it couldn't be done, and now it seems it can.
I wanted to be able to clone my device to an image file, and restore from the image file.
http://www.spritesoftware.com/store...-HMP-IconLink&utm_campaign=Clone-HMP-IconLink
It's just a shame sprite doesn't sell this as a single user licence.
This would be awesome for us addicted flashers. I know the one thing I hate doing is re-installing all my apps after, testing a rom and deciding it wasn't for me and want to go back to the way it was exactly before.
THE-KEK said:
I've asked this question here before, and it seems it couldn't be done, and now it seems it can.
I wanted to be able to clone my device to an image file, and restore from the image file.
http://www.spritesoftware.com/store...-HMP-IconLink&utm_campaign=Clone-HMP-IconLink
It's just a shame sprite doesn't sell this as a single user licence.
This would be awesome for us addicted flashers. I know the one thing I hate doing is re-installing all my apps after, testing a rom and deciding it wasn't for me and want to go back to the way it was exactly before.
Click to expand...
Click to collapse
I dont understand why everyone fusses about flashing a rom anymore and setting up their apps now that UC is here. I literally have 51 (I just counted) apps I installed on my latest rom and it takes me no more than 10-20 minutes and I'm up and running. Does noone use UC? WTH?
P1Tater said:
I dont understand why everyone fusses about flashing a rom anymore and setting up their apps now that UC is here. I literally have 51 (I just counted) apps I installed on my latest rom and it takes me no more than 10-20 minutes and I'm up and running. Does noone use UC? WTH?
Click to expand...
Click to collapse
UC requires one to be a bit more technical with xml programming. There is nothing wrong with a simple backup/restore. In fact, backup/restore requires no technical knowledge at all. OP is looking to go back to exactly what he had before (no new ROM; yes, he has to flash the old ROM back), so restore works very well for him.
I really like UC I only wish I had the time to invest to setup a xml file for my settings.
I really liked setting savor as it did all the cabs as well as my personal settings all by setting up the phone once and pushing 1 button to backup.
At risk of getting Flamed for asking an obvious question, can anyone direct me to a thread on configuring UC. I am keen to implement it on my latest UC compatible Dutty's rom but am unable to find the relevant info.
I have tried using the search tool, but unfortunately UC is too short and I'm not sure what the acronym stands for!
I also tried Skunkygwen's "G iving W ise E ducational N oob I nstructions" sticky, but I couldn't see anything there either.
Thanks in advance for any assistance.
Rich
ClownShoes said:
At risk of getting Flamed for asking an obvious question, can anyone direct me to a thread on configuring UC. I am keen to implement it on my latest UC compatible Dutty's rom but am unable to find the relevant info.
I have tried using the search tool, but unfortunately UC is too short and I'm not sure what the acronym stands for!
I also tried Skunkygwen's "G iving W ise E ducational N oob I nstructions" sticky, but I couldn't see anything there either.
Thanks in advance for any assistance.
Rich
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/showthread.php?t=366337 (Development/Hacking section of this forum)
Thanks for the swift response.
"User Customization" should have guessed really
Cheers
Rich
Hi guys.
I can't reply to original topic, which is here.
I've downloaded version [ROM] CM7.2-20120325-gio-NIGHTLY-AROMA.zip nad installed it without any problems, in newest clockworkmod recovery 5.0.2.7.
My problem is, that after restarting wi-fi or whole system it changes mac address. First 3 pairs (if i remember it's producers code) are still the same, but the rest is random i think.
I've searched through this forum, and user google, but i don't found anything that can help me...
I found how to change mac address, but i read it's not permanent change...
Someone could help me?
Sorry if I added this question to wrong forum, I'm just no so good at english, as you probabky can see while reading my post
OK, sorry that was my fault...
I run app named GooManager and after that and after while it said there is patch to current ROM. I installed this patch (I had to do it manually, because of GooManager crashes, i think it's because of SuperUser, but there were no info about needed priviliges) nad now everything works fine i think
Patch is here. If someone could edit main topic and add this?
I used the ROM from here. (LG Optimus T (P509): January 8: Build 7/Final)
I have no Google Play store icon anywhere. I see the Google Play process running in the background.
but have no way to get it to show up. This on a fresh ROM, all User data, Cache, and all that cleared.
Any help on this would be nice.
Would of asked on that post where I got the ROM. but I don't have the patience to or any thoughts about other post to make to meet the requirements to even post there.
Tried without flashing the Google Apps and with the google apps they list there.
Flashing Google Apps just crashes things like the browser. it wont even open.
Not flashing Google Apps I can use the browser just fine. but I still see "Google Play Services" Running. So that tells me google play is installed.
So don't have to flash it. but cant open it even if i did or not. no Icon anywhere no matter what I try. I been wanting to use CM10. but this issue keeps me going back to CM7.
Thanks in advance to the person with the answer.
TroyFoxxin said:
I used the ROM from here. (LG Optimus T (P509): January 8: Build 7/Final)
I have no Google Play store icon anywhere. I see the Google Play process running in the background.
but have no way to get it to show up. This on a fresh ROM, all User data, Cache, and all that cleared.
Any help on this would be nice.
Would of asked on that post where I got the ROM. but I don't have the patience to or any thoughts about other post to make to meet the requirements to even post there.
Tried without flashing the Google Apps and with the google apps they list there.
Flashing Google Apps just crashes things like the browser. it wont even open.
Not flashing Google Apps I can use the browser just fine. but I still see "Google Play Services" Running. So that tells me google play is installed.
So don't have to flash it. but cant open it even if i did or not. no Icon anywhere no matter what I try. I been wanting to use CM10. but this issue keeps me going back to CM7.
Thanks in advance to the person with the answer.
Click to expand...
Click to collapse
Are you sure you are using the right GApps package? That's Rasheds ROM you're referring to using. Build 7 is Android 4.1.2. Check this link here. And some of the problems you may be experiencing could be due to a faulty installation because of limited system space. You may want to review the LG Optimus One FAQ too.
shinobisoft said:
Are you sure you are using the right GApps package? That's Rasheds ROM you're referring to using. Build 7 is Android 4.1.2. Check this link here. And some of the problems you may be experiencing could be due to a faulty installation because of limited system space. You may want to review the LG Optimus One FAQ too.
Click to expand...
Click to collapse
There is more then enough internal space. (150MB Free after Gapps Flashed).
I tried again with the Gapps for 4.1.2. At the time my post I re flashed the ROM but left it out. I didn't flash it.
When I tried again. I got the Updating Android. but still no Play Store Icon. However it did not break my home or other buttons.
and browser still working. but again. no Play Store icon.
I checked the FAQ. Currently i see nothing there to give hints. I got more then enough free space. I've flashed ROMs on this phone dozens of times so I know the whole wiping of cache and data and all that between each ROM.
TroyFoxxin said:
There is more then enough internal space. (150MB Free after Gapps Flashed).
I tried again with the Gapps for 4.1.2. At the time my post I re flashed the ROM but left it out. I didn't flash it.
When I tried again. I got the Updating Android. but still no Play Store Icon. However it did not break my home or other buttons.
and browser still working. but again. no Play Store icon.
I checked the FAQ. Currently i see nothing there to give hints. I got more then enough free space. I've flashed ROMs on this phone dozens of times so I know the whole wiping of cache and data and all that between each ROM.
Click to expand...
Click to collapse
You have to trim the Rom, there's not enough SYSTEM space for the Rom and Gapps..this has been discussed time and time again on rashed thread(cm10)..There's a tool ( Oone Rom editor that will help you do this) This is why you have the bugs that your facing.
3ncrypt3d_Droid said:
You have to trim the Rom, there's not enough SYSTEM space for the Rom and Gapps..this has been discussed time and time again on rashed thread(cm10)..There's a tool ( Oone Rom editor that will help you do this) This is why you have the bugs that your facing.
Click to expand...
Click to collapse
I used that program already. looking at all that it would only show.
the math dont even come to half of what the phone memory is.
TroyFoxxin said:
I used that program already. looking at all that it would only show.
the math dont even come to half of what the phone memory is.
Click to expand...
Click to collapse
The system partition has nothing to do with the devices memory. These devices have a 190 MB system partition, this is where Android gets installed. What you are referring to is the user data partition which is 200 MB, while the device has 415 MB+- RAM ( memory ). Unless you are using Android 4.2.2, the only way to see how much space is on the system partition is with a third party app, with ADB, or with a Terminal Emulator app on the device. The math isn't adding up because you don't understand it, that's why I pointed you to the FAQ thread.
I wrote OOne ROM Editor. I haven't put hundreds, yes hundreds, of hours in to it's development just for general pleasure. It was written for a specific purpose, to trim ICS and newer ROMs for devices with small or limited system partitions.
shinobisoft said:
The system partition has nothing to do with the devices memory. These devices have a 190 MB system partition, this is where Android gets installed. What you are referring to is the user data partition which is 200 MB, while the device has 415 MB+- RAM ( memory ). Unless you are using Android 4.2.2, the only way to see how much space is on the system partition is with a third party app, with ADB, or with a Terminal Emulator app on the device. The math isn't adding up because you don't understand it, that's why I pointed you to the FAQ thread.
I wrote OOne ROM Editor. I haven't put hundreds, yes hundreds, of hours in to it's development just for general pleasure. It was written for a specific purpose, to trim ICS and newer ROMs for devices with small or limited system partitions.
Click to expand...
Click to collapse
I dont know what to try to trim with that program. i dont know what half them apps do.
Like Exchange2.apk. I don't know what that is. Which are some of the key things i can trim?
Also, Telling me how many hours you put into a program and that i dont understand something not going to be on my good side. So i missed something, big deal. I just got off a anxiety attack. and i was needing was a simple answer. doing a search for "LG P509 No Playstore Icon" was getting me no where and i didnt want to have to search page by page of the 487 pages of the ROMs post to find clues.
TroyFoxxin said:
I dont know what to try to trim with that program. i dont know what half them apps do.
Like Exchange2.apk. I don't know what that is. Which are some of the key things i can trim?
Click to expand...
Click to collapse
The help docs in OOne ROM Editor's thread list some of the known files that can be removed from and or moved around, ie; converted to user app, in the ROM.
shinobisoft said:
The help docs in OOne ROM Editor's thread list some of the known files that can be removed from and or moved around, ie; converted to user app, in the ROM.
Click to expand...
Click to collapse
just never mind. i dont need the stress right now, ill just stay with CM7.
Every time i try to Build the ROM and put it on the phone CWM just says its bad.
TroyFoxxin said:
just never mind. i dont need the stress right now, ill just stay with CM7.
Every time i try to Build the ROM and put it on the phone CWM just says its bad.
Click to expand...
Click to collapse
Are you getting an "assert() failed" message? If you are using CWM 5.0.2.7 Touch, it will only allow you to install P500 ROMs. OOne ROM Editor has the ability to remove the "assert()" statement from the ROM's updater-script to prevent that particular error from happening. Before building the ROM, go to the Tools->Build submenu and select the Build Options command. Check the checkbox for "Remove updater-script 'assert()' statement". Then build the ROM.
And stress... You call editing a ROM stress? Try writing the code for OOne ROM Editor Or better yet, play with live electricity :silly: - oh wait I do that already since I am an electrician... DOn't get frustrated by it. Sit back relax and soak in some of the knowledge around here.
shinobisoft said:
Are you getting an "assert() failed" message? If you are using CWM 5.0.2.7 Touch, it will only allow you to install P500 ROMs. OOne ROM Editor has the ability to remove the "assert()" statement from the ROM's updater-script to prevent that particular error from happening. Before building the ROM, go to the Tools->Build submenu and select the Build Options command. Check the checkbox for "Remove updater-script 'assert()' statement". Then build the ROM.
And stress... You call editing a ROM stress? Try writing the code for OOne ROM Editor Or better yet, play with live electricity :silly: - oh wait I do that already since I am an electrician... DOn't get frustrated by it. Sit back relax and soak in some of the knowledge around here.
Click to expand...
Click to collapse
Again bad, day. had a Anxiety attack. haven't slept. I havent played with Android as often as other things. I am also a Electronic person. Soldering Caps and so on on motherboards all the time. So please dont talk like that to people you dont know. they may have plenty of knowledge. but maybe having whats called a short fuse kinda day.
Also I did do "Remove updater-script 'assert()' statement". And i get no error from OOne ROM Editor it was in CWM it would just say it was bad, or say nothing at it would just restart CWM. Ill try again when Im better. Right now my phone has CWM 5.0.2.0, So ill change that as well when i try again.
but right im turning in for the night.
TroyFoxxin said:
Again bad, day. had a Anxiety attack. haven't slept. I havent played with Android as often as other things. I am also a Electronic person. Soldering Caps and so on on motherboards all the time. So please dont talk like that to people you dont know. they may have plenty of knowledge. but maybe having whats called a short fuse kinda day.
Also I did do "Remove updater-script 'assert()' statement". And i get no error from OOne ROM Editor it was in CWM it would just say it was bad, or say nothing at it would just restart CWM. Ill try again when Im better. Right now my phone has CWM 5.0.2.0, So ill change that as well when i try again.
but right im turning in for the night.
Click to expand...
Click to collapse
Sorry you're having a bad day. Rest assured, if I was talking down to you, there wouldn't be any smilies. I was just expressing that you weren't the only one out there with stress in their life, and some of us have loads of it. On that note, I'm not one of the many teenagers around here. So I'm not talking down to you, but out of experience. My teenage years were gone 23 years ago. Apparently it was take outta context, Sorry.
I think the issue I mentioned for CWM 5.0.2.7 is a shared issue with CWM 5.0.2.0, but I can't say for sure as I don't recall ever using CWM 5.0.2.0. I wasn't suggesting changing to the CWM I mentioned, was asking if that was the one you were/are using, which you've now stated you aren't. There error I was referring to would have been from CWM after flashing or trying to flash a ROM.
shinobisoft said:
Sorry you're having a bad day. Rest assured, if I was talking down to you, there wouldn't be any smilies. I was just expressing that you weren't the only one out there with stress in their life, and some of us have loads of it. On that note, I'm not one of the many teenagers around here. So I'm not talking down to you, but out of experience. My teenage years were gone 23 years ago. Apparently it was take outta context, Sorry.
I think the issue I mentioned for CWM 5.0.2.7 is a shared issue with CWM 5.0.2.0, but I can't say for sure as I don't recall ever using CWM 5.0.2.0. I wasn't suggesting changing to the CWM I mentioned, was asking if that was the one you were/are using, which you've now stated you aren't. There error I was referring to would have been from CWM after flashing or trying to flash a ROM.
Click to expand...
Click to collapse
Can that program add apps? If so or not. maybe I can edit the zip directly. but is it possible to port the old music player in Gingerbread to JB. I don't like Apollo. or would it just be better to remove Apollo and find something I like in Play store when i make this work?
And should i try to use CWM 5.0.2.7 instead, and try again?
EDIT: Says I have the latest according to this.
EDIT 2: just ROM Manger being a butt. going to the site directly. I see CWM 5.0.2.7 as the latest.
TroyFoxxin said:
Can that program add apps? If so or not. maybe I can edit the zip directly. but is it possible to port the old music player in Gingerbread to JB. I don't like Apollo. or would it just be better to remove Apollo and find something I like in Play store when i make this work?
And should i try to use CWM 5.0.2.7 instead, and try again?
EDIT: Says I have the latest according to this.
EDIT 2: just ROM Manger being a butt. going to the site directly. I see CWM 5.0.2.7 as the latest.
Click to expand...
Click to collapse
Yes apps can be added, but only as User Apps. Select "User Apps" in the treeview on the left. Then right click on the listview on the right and select the "Add apps" command item. A file dialog will appear. Multiple file selection is allowed.
You can remove Apollo. I prefer Google Play Music myself.
For your recovery. CWM 5.0.2.7 will only allow installing P500 ROMs. I do prefer the touch version of CWM, and since P509 is identical to P500, it's really not an issue other than baseband which is solved with a flashable patch. I really cannot recommend a recovery as we all have different likes/dislikes/usage patterns. I would recommend not using ROM Manager to install a recovery. It's been known to be faulty with our devices. Theres always ADB and fastboot or another one of my tools, Android Flash Recovery. There are several other apps around XDA that can do this also.
shinobisoft said:
Yes apps can be added, but only as User Apps. Select "User Apps" in the treeview on the left. Then right click on the listview on the right and select the "Add apps" command item. A file dialog will appear. Multiple file selection is allowed.
You can remove Apollo. I prefer Google Play Music myself.
For your recovery. CWM 5.0.2.7 will only allow installing P500 ROMs. I do prefer the touch version of CWM, and since P509 is identical to P500, it's really not an issue other than baseband which is solved with a flashable patch. I really cannot recommend a recovery as we all have different likes/dislikes/usage patterns. I would recommend not using ROM Manager to install a recovery. It's been known to be faulty with our devices. Theres always ADB and fastboot or another one of my tools, Android Flash Recovery. There are several other apps around XDA that can do this also.
Click to expand...
Click to collapse
Ill just leave it be then. Its always worked for me. if there was a problem it was with the ROM.
I haven't tried Google Play music before. but is it possible to port the music player from Gingerbread to JB?
but I'm getting the jiffs of that program. I just need to play with it. some things I converted to User apps never loaded at all.
So I need to play with what I can put in User data that will still work. but none the less i been getting the builds to install.
And even show Play Store again.
Just need to mess with what works and dont in User data.
-Edit-
I tried to Make LatinIME Smaller and convert it to Userdata in the build options but every build has no keyboard support.
TroyFoxxin said:
Ill just leave it be then. Its always worked for me. if there was a problem it was with the ROM.
I haven't tried Google Play music before. but is it possible to port the music player from Gingerbread to JB?
but I'm getting the jiffs of that program. I just need to play with it. some things I converted to User apps never loaded at all.
So I need to play with what I can put in User data that will still work. but none the less i been getting the builds to install.
And even show Play Store again.
Just need to mess with what works and dont in User data.
-Edit-
I tried to Make LatinIME Smaller and convert it to Userdata in the build options but every build has no keyboard support.
Click to expand...
Click to collapse
Is there anyway you can post the updater-scipt from one of the builds you've made with OOne ROM Editor where you've modified the LatinIME.apk and specified to install as a User App? The updater-script is located in the /META-INF/com/google/android folder in the output/build ROM.
One thing to note tho, build options are reset after every build.
shinobisoft said:
Is there anyway you can post the updater-scipt from one of the builds you've made with OOne ROM Editor where you've modified the LatinIME.apk and specified to install as a User App? The updater-script is located in the /META-INF/com/google/android folder in the output/build ROM.
One thing to note tho, build options are reset after every build.
Click to expand...
Click to collapse
I noticed that it resets everytime. so i been ontop of that. I check both boxes in the build options before I build them.
I did read also not to delete LatinME.apk. and use the editor. But i know the LatinME is a nice chunk of Memory.
So to make it smaller and usable in User apps is plus to make the important things I need working.
-Edit-
I haven't been saving the bad builds. that attachment was for a new build I haven't tried yet.
and I just did. now keyboard working. But I think that build I didn't tell it to put Latin in User apps that time.
But I did use the editor. So I don't know.
TroyFoxxin said:
I noticed that it resets everytime. so i been ontop of that. I check both boxes in the build options before I build them.
I did read also not to delete LatinME.apk. and use the editor. But i know the LatinME is a nice chunk of Memory.
So to make it smaller and usable in User apps is plus to make the important things I need working.
-Edit-
I haven't been saving the bad builds. that attachment was for a new build I haven't tried yet.
and I just did. now keyboard working. But I think that build I didn't tell it to put Latin in User apps that time.
But I did use the editor. So I don't know.
Click to expand...
Click to collapse
I can't tell what you installed as user apps from the updater-script, but there were apps installed to the user ( data ) partition. And the assert() statement is missing from the script, so I know that option was checked in the Build Options.
The reason I say not to manually move it is because the LatinIME Keyboard Editor should be used to edit it's dictionaries. Once you press the "Apply" button in the LatinIME Keyboard Editor, it removes the LatinIME.apk from System Apps and actually puts it in the apps Recycle Bin. I use the list of files in the Recycle Bin as a filter of files not to include when building the ROM. LatinIME Keyboard Editor also looks in the Recycle Bin for the LatinIME.apk if it can't find it in System Apps but it assumes that it's deleted so it won't do anything.
I am actually working on OOne ROM Editor right now. So you can be on the lookout for an update
shinobisoft said:
I can't tell what you installed as user apps from the updater-script, but there were apps installed to the user ( data ) partition. And the assert() statement is missing from the script, so I know that option was checked in the Build Options.
The reason I say not to manually move it is because the LatinIME Keyboard Editor should be used to edit it's dictionaries. Once you press the "Apply" button in the LatinIME Keyboard Editor, it removes the LatinIME.apk from System Apps and actually puts it in the apps Recycle Bin. I use the list of files in the Recycle Bin as a filter of files not to include when building the ROM. LatinIME Keyboard Editor also looks in the Recycle Bin for the LatinIME.apk if it can't find it in System Apps but it assumes that it's deleted so it won't do anything.
I am actually working on OOne ROM Editor right now. So you can be on the lookout for an update
Click to expand...
Click to collapse
Well I got everything to work. Keyboard, Play Store, etc. But not sure ill stick with trying to put JB on the phone.
Its really slow. Unless more free space on the system partition would allow it to run faster.
Would your OOne ROOM Editor work on Any rom Like a CM7 Rom? or just JB ones? if not would you consider support for other roms?
I haven't tried, but figure I would ask.
TroyFoxxin said:
Well I got everything to work. Keyboard, Play Store, etc. But not sure ill stick with trying to put JB on the phone.
Its really slow. Unless more free space on the system partition would allow it to run faster.
Would your OOne ROOM Editor work on Any rom Like a CM7 Rom? or just JB ones? if not would you consider support for other roms?
I haven't tried, but figure I would ask.
Click to expand...
Click to collapse
OOne ROM Editor is just for ICS and JB ROMs. It's really not needed for Android versions prior to 4.0.
After searching desperately for the EUI 6 rom for this phone I found a Rom with root. I didn't get to try it because I thought it was fake or something. It said invalid sparse or something and waited a few more days to get the official EUI6 which I'm using right now. I found the modded Rom on 4pda and they claim that you can touch system partition without getting errors or baseband problem. There is also blue light led notification. There is a patch to disable thermal throttling and make the phone a lot smoother. They said it helped a lot but the download for the zip file is not found when I tried downloading it. They say the boot.img is from 27s. Can you guys help make a custom rom out of this. I want to try it but the most important for me is the thermal.zip file which is sadly not available. https. ://4pda.ru/forum/index.php?showtopic=895159&st= 2020#entry77308634
Let me clear this now that I am using the ROM. It does say that you can make changes to the system partition but it does not mean that you can root it. I tried with magisk and failed. The blue LED notification works. You can access engineer mode in settings. Baseband works. I installed UPM mod for performance but still it is not so good as we need that thermal.zip file to fix throttling. Even the simplest games or animations is going to lag on this phone. Face unlock is here and works well. Some LeEco apps are removed which gives more free ram but just a little bit. Notifications from apps work. Icons appear in the status bar instead of three dots. Color correction is available in settings. Google play is here by default. You can save contacts on Google. Nothing else extraordinary everything else is the same. I just need that thermal throttling fix. The folks over at 4PDA say that this file makes the phone a lot smoother but unfortunately for whatever reason it's not available. So far I changed my boot animation and installed UPM mod via recovery from PC.
There is a newer version available https://drive.google.com/file/d/1h0VsqO-V9jsxf1Pyv3muR1qoKuvSHunu/view.
It's much better. Try it.
It has a throttling manager in developer options but IDK how to use it and it also has a multi window mode. Idk how to use that also. I just discovered that it has buttons on the status bar on the extreme sides. The left side for multitask button and holding it does the user set action and the right side turns off the display and holding it shows the power off options.
It also has a brightness slider in the notification panel along with sliding quick toggles.
It has advanced settings for Dolby and no advertising in apps
is that work on le 650?
does this version work on LEX650? I tried to install it but it is stuck at "Compare product name and tool name"
Yes, it works on x650, x651, and x653
The new fastboot rom is here v04
https://drive.google.com/file/d/1589hbryYwF1lrVU0_yC6lHFfr6l314ut/view
thankx to kaito373 from 4pda
nightcap79 said:
Yes, it works on x650, x651, and x653
The new fastboot rom is here v04
.....
thankx to kaito373 from 4pda
Click to expand...
Click to collapse
The file is down also I have downloaded it before it was taken down but still can t install it, it is stuck like the last time on "waiting for any device". I don t have this problem with the stock one.
AnRussianBot said:
The file is down also I have downloaded it before it was taken down but still can t install it, it is stuck like the last time on "waiting for any device". I don t have this problem with the stock one.
Click to expand...
Click to collapse
For me it was a problem with drivers, in the device managers appears Android device, you have to choose manually the driver of bootloader interface of Google and it works, I'm using the ROM now and it's awesome.
can anyone update the link for v4? the link is down
Milkytea said:
can anyone update the link for v4? the link is down
Click to expand...
Click to collapse
I got the v3 if youre desperate and works mostly fine. Whats the difference between v3 and v4?
gomorin said:
For me it was a problem with drivers, in the device managers appears Android device, you have to choose manually the driver of bootloader interface of Google and it works, I'm using the ROM now and it's awesome.
Click to expand...
Click to collapse
I installed the google usb drivers but it didn t change anything ... .
Hi, the link for v4 is not working anymore.
Can someone please send the v4 ROM with ROOT? Thanks.
Pedrester said:
I got the v3 if youre desperate and works mostly fine. Whats the difference between v3 and v4?
Click to expand...
Click to collapse
V4 fixes some bugs. I think they are important ones. You can't share via Bluetooth, you can open a link or something that redirects you to another app. For example clicking a YouTube link in Gmail or Google chrome won't open YouTube and say something like LeTVshare has stopped. I think you can't use your Bluetooth headset also.
Link for v4 if anyone still needs (remove the spaces)
http s:// drive.google.com/file/d/1LPYZ4QmHvRwSRsG1nOwB3IqUXKvEBZM4/view