I'm not sure whether it's appropriate to post here but, I posted the following on the CyanogenMod boards and androidforums too, but no response yet. Hoping someone here can help me with this weird problem I have. Any help is much appreciated. Also this is my first post, and I'm quite a n00b (I did watch the video), so please be kind.
Let me describe the problem in some detail:
When using Wifi everything works as per usual.
When using mobile data (Wifi disabled) apps cannot access the internet.
E.g. Whatsapp messages not delivered, No news/weather updates, Play Store wont load etc.
BUT I CAN browse the web . (Visit the CyanogenMod home page, Wikipedia etc.)
So I believe this can't be an APN setting problem or something of that sort, since there is internet access to the phone, just not to any app other than the Internet Browser.
I am a first time flasher, so please be kind. I used the instructions on: [https : //gist.github.com/1694742] to flash to CM7.1.0 (also followed the optional Gapps part). I couldn't use the instructions on the official wiki since my Hboot version is 2.00.0002.
It might be worthwhile noting that on my first boot, I tried to set up my Google account but failed, since (I presume) it could not get to the internet (even though the H sign is visible on top next to signal strength). Later on I can set up my Google account using wifi. Also no Google apps were actually there (even though I followed the instructions to flash them in) on first boot. I have to go to the market and manually download them (Gmail, youtube etc.) I'm not sure whether that is normal, but that's how it is. I have tried this entire process a couple of times, and always ended up with the same results: everything works on wifi, but apps (other than the Internet Browser) can't access the internet on mobile data (3G/H).
Also perhaps worth mentioning: I have now flashed to CM7.2 RC1 using ROM Manager, everything works fine, except that I have the same exact problem as before.
Any help is much appreciated !
Thanks in advance!
Same problem
pinkydoe said:
I'm not sure whether it's appropriate to post here but, I posted the following on the CyanogenMod boards and androidforums too, but no response yet. Hoping someone here can help me with this weird problem I have. Any help is much appreciated. Also this is my first post, and I'm quite a n00b (I did watch the video), so please be kind.
Let me describe the problem in some detail:
When using Wifi everything works as per usual.
When using mobile data (Wifi disabled) apps cannot access the internet.
E.g. Whatsapp messages not delivered, No news/weather updates, Play Store wont load etc.
BUT I CAN browse the web . (Visit the CyanogenMod home page, Wikipedia etc.)
So I believe this can't be an APN setting problem or something of that sort, since there is internet access to the phone, just not to any app other than the Internet Browser.
I am a first time flasher, so please be kind. I used the instructions on: [https : //gist.github.com/1694742] to flash to CM7.1.0 (also followed the optional Gapps part). I couldn't use the instructions on the official wiki since my Hboot version is 2.00.0002.
It might be worthwhile noting that on my first boot, I tried to set up my Google account but failed, since (I presume) it could not get to the internet (even though the H sign is visible on top next to signal strength). Later on I can set up my Google account using wifi. Also no Google apps were actually there (even though I followed the instructions to flash them in) on first boot. I have to go to the market and manually download them (Gmail, youtube etc.) I'm not sure whether that is normal, but that's how it is. I have tried this entire process a couple of times, and always ended up with the same results: everything works on wifi, but apps (other than the Internet Browser) can't access the internet on mobile data (3G/H).
Also perhaps worth mentioning: I have now flashed to CM7.2 RC1 using ROM Manager, everything works fine, except that I have the same exact problem as before.
Any help is much appreciated !
Thanks in advance!
Click to expand...
Click to collapse
Same problem.
No mobile connection on native google aps (maps, play, docs, gmail...), but Opera Mini, LastPass works.
Desire HD
Unofficial cyanogen mode
JellyTime
Same problem
Revolution HD and stock rom worked fine.
pinkydoe said:
I am a first time flasher, so please be kind. I used the instructions on: [https : //gist.github.com/1694742] to flash to CM7.1.0 (also followed the optional Gapps part)
Click to expand...
Click to collapse
I would suggesting going S-OFF and installing 4ext recovery (as opposed to CWM) as it will prove easier and more reliable.
You can Revolutionary to S-OFF but it requires an HBoot version of 0.98.0000 or 0.9.0002. To find out how to downgrade your HBoot, read this guide.
A list of RUUs can be found here.
recmund said:
Same problem.
No mobile connection on native google aps (maps, play, docs, gmail...), but Opera Mini, LastPass works.
Desire HD
Unofficial cyanogen mode
JellyTime
Same problem
Revolution HD and stock rom worked fine.
Click to expand...
Click to collapse
The problem was with Titanium Backup restoring wrong android APN settings for 4.2 version
Please people stop creating threads. ask questions here
Sent from my supercharged :tank:
i've tried searching for my current problem but doesn't seem to get a good match. (damn this site is BIG.)
i really apologize if i overlook it, or my searching skills really suck.
here's my problem:
i've been trying to install this new rom: http://forum.xda-developers.com/showthread.php?t=1436854 to my galaxy SII.
after installing i have this problem of not being able to switch on my wi-fi.
also there's a problem with storage.
if i go to settings > storage (under device). a pop up appear saying "unfortunately, Settings has stopped". then there's options 'Report' and 'OK'.
i restarted everything again, reinstalled everything again and came up with the same problem
this is my phone info:
model: GT-I9100
android version: 4.0.4
baseband: I9100XXLPS
kernel version: 3.0.15-I9100UHLPK-CL390451
[email protected] #3
build number: IMM761_RR
resurrection version: resurrection remix ics v.2.6 by westcrip
i followed these instructions here: http://forum.xda-developers.com/showthread.php?t=1544487
download the latest one (I9100XWLPM)
after that followed this: http://forum.xda-developers.com/showthread.php?t=1103399
download this file: CF-Root-SGS2_UH_UVC_LPK-v5.5-CWM5.zip
after rooting, i then install the new rom.
following this:
off phone.
press volume up, home button dan power button
backup and restore
backup to internal sd card
after backup.
wipe data and factory reset
wipe cache
advanced > wipe delvik & wipe batt stats
press FIX PERMISSION
install zip from internal sd
follow instructions.
im wondering if there's something that i did wrong that's causing this problem..
thx so much in advance
Factory reset
Did you tried factory reset?
It might solve this problem.
If I helped you just hit thanks
Niquel97 said:
Did you tried factory reset?
It might solve this problem.
If I helped you just hit thanks
Click to expand...
Click to collapse
no man.. it doesnt. i tried reinstalling everything too.. i think its the rom? im not sure.. =(
darkclaw3000 said:
here's my problem:
i've been trying to install this new rom: http://forum.xda-developers.com/showthread.php?t=1436854 to my galaxy SII.
after installing i have this problem of not being able to switch on my wi-fi.
also there's a problem with storage.
if i go to settings > storage (under device). a pop up appear saying "unfortunately, Settings has stopped". then there's options 'Report' and 'OK'.
Click to expand...
Click to collapse
about wifi : maybe that rom uses a recompiled kernel If you don't know I can tell you about : this is a well-known problem in linux and android kernel when recompiling kernel wifi module can not work the solutions is to compile it separately (...)
I'm not sure but if this is about that rom you only have a chance to try another rom
about storage error: it make me think that : that rom surely has some errors ... try another rom
also is not my intention to blame anybody I just tell you about my experience in fact is very hard to prepare a custom ROM !
You are supposed to fix permissions after a flash. Also, why are you wiping battery stats? That doesn't do anything.
lowandbehold said:
You are supposed to fix permissions after a flash. Also, why are you wiping battery stats? That doesn't do anything.
Click to expand...
Click to collapse
at which point did i miss that step..? im sorry its kinda confusing for me haha. im wondering if its the rom itself
batterystats.bin (search for this file by Root Explorer i.e.) is used to compute battery usage in UI settings in "Battery Use" if you reset it that's for more accurate calculation of battery usage indeed it can not solve your problem but can be useful ...
if you fix permissions maybe will solve 2nd problem but not sure about 1st problem if so pls post here it's something interesting but for me was never a solution to wifi problem- I have had to compile wifi module separately in order to get a working wifi
if this solves your problem credits go to lowandbehold
only that I can't wait out of curiosity ...post here if it solves your problem !
(from CWM menu or read this )
darkclaw3000 said:
at which point did i miss that step..? im sorry its kinda confusing for me haha. im wondering if its the rom itself
Click to expand...
Click to collapse
In your steps you said that you fixed permissions and then installed the zip. You have to install zip and then fix permissions.
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
Just looked at the OP...there are extended steps to installing the ROM for the first time...
http://forum.xda-developers.com/showpost.php?p=28121898&postcount=51494
IT'S SOLVED!!!
its a problem with the kernel! after changing another one, it works perfectly!
this is the kernel i changed to: siyahkernel/v3.0/Siyah-v3.3.3d-CWM .zip
THANKS SO MUCH EVERYONE!
darkclaw3000 said:
IT'S SOLVED!!!
its a problem with the kernel! after changing another one, it works perfectly!
this is the kernel i changed to: siyahkernel/v3.0/Siyah-v3.3.3d-CWM .zip
THANKS SO MUCH EVERYONE!
Click to expand...
Click to collapse
well,
there is a tool named modinfo in Linux useful to get info about .ko modules it simply display version magic this is in fact kernel version that this module was compiled for it means if you have i.e. kernel ver. 2.6.32.9 and version magic for module is 2.6.35.7 it means wireless is not working because that module wasn't compiled for that kernel it's about rights and symbols not exported by kernel so module can't load -and other technical explanations but we can't enter more details here because it's possible to get criticism from Torvalds but who cares about
In fact I never knew that but now it's easy to understand what happened : flashed that rom then changed kernel now wifi will not load ...because it was compiled for another kernel...something like that !
Problem after instal Viper ROM
Hi,
I encountered problems right after installation of Viper ROM on my HTC ONE X.
1. Facebook for HTC sense doesn't appear in my sync account.
- Tried to install in but having problem with the system message is cannot installed. Even though manage to install and when I try to run it. It auto stop.
2. Weather full animation feature is turn off. Try to go the menu and it seems like the edit button is off.
Please advice.
Thanks
ruscan.calin said:
well,
there is a tool named modinfo in Linux useful to get info about .ko modules it simply display version magic this is in fact kernel version that this module was compiled for it means if you have i.e. kernel ver. 2.6.32.9 and version magic for module is 2.6.35.7 it means wireless is not working because that module wasn't compiled for that kernel it's about rights and symbols not exported by kernel so module can't load -and other technical explanations but we can't enter more details here because it's possible to get criticism from Torvalds but who cares about
In fact I never knew that but now it's easy to understand what happened : flashed that rom then changed kernel now wifi will not load ...because it was compiled for another kernel...something like that !
also I wanted to give you a thanks for this feedback but get stupid message Sorry, you are limited to 8 thanks per day but I'll be back
Click to expand...
Click to collapse
oo thx for the info! i think im getting the hang of this. i think there's a thread explainin the various stuffs in a hp like what's odin, what's a kernel, what's a rom n how it all works together. been finding that thread again.. haha. any chance u know..?
Q&A for CyanogenMod 12.0 for Photon Q
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CyanogenMod 12.0 for Photon Q. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
So far so good for CM12, everything runs really smooth. Only issues are the default text app send button is grayed out and won't let you send but using Google messenger app it works fine. Is there any reason to why the send button wouldn't work?
LTE seems to work well but visually every now and then it seems to disconnect/reconnect but functions fine. And just a quick/dumb question which CDMA subscription should we use, RUIM/SIM or NV as I found info on RUIM/SIM but couldn't really find much on the definition of NV.
I really wanted to know that everybody has no problem at all in logging in Google+ with the latest version of its client.
I'm having trouble the most recent one that I can download from Play Store, : v5.1.0
I had to restore the backed up version of v5.0
I recently got the multimedia dock for this phone and I've noticed that some things don't work. None of the USB ports on the dock seem to interface with the OS, but any peripheral connected by a USB OTG cable (while not in the dock, of course) works just fine. Also, the device doesn't seem to detect that it is in a dock at all; I have it set to daydream when it's docked, but nothing happens.
Does anybody else have these issues? Is there a known or planned solution?
Thanks!
Hei just another quicky:
I had problems with twrp unable to mount /data on encrypted phone. I was never asked for passphrase also it did not detect data was formated as f2fs and assumed ext4.
After factory reset I reformated data and cache to f2fs again (as I think the performance gain is real) and cleanflashed latest cm12 nightly + gapps.
After setting up my phone it became slugish fast again, also battery did drain fast (also the phone did get real hot)
My circumvention so far is limiting Background processes to 2 within Dev options. Since then phone stays much cooler, everything works as expected normal cpu usage shows 2.5/3.2/3.5.
Before that phone was sometimes at 12/9/8 or so and thus bekame unresponsive/sluggish.
Does anyone know the standard count of background processes? Form Q?
Since i did not discover any strange behavior/lags since i switched to only 2 backgroundprocesses anyone knows what kind of usage could result in problems with lower backgroundprocesses?
Thanks in advance!
CM 12.0 nightlies I/O and issues
So I switched over to CM12 because of the ability to switch the filesystems to f2fs. And so far I have seen a pretty decent improvement in the response, speed, and general performance with CM12.
A few issues have come up though:
CM nightly 03232015
-the cLock widget just randomly stopped functioning. Worked for a day or two, then stopped working. I wasn't able to set the alarm and clicking on the time on the home screen does nothing. Disabled cLock and am using the default Deskclock instead (I need to be able to set alarms).
-the messaging app was not working correctly... I was able to receive texts but the send button was greyed out and would not let me click on it. This is both over Wi-Fi and 3G and 4G LTE. Had to revert to 8sms that I was using on CM10...
-the themes are applied inconsistently... not all apps or system dialogs are themed when I use ThemeDIY to create/apply my own theme.
-equalizer doesn't seem to make a big difference...
-doesn't seem to remember wifi logins... keep getting the "sign in to wireless network" notification (I've already signed in)... the sign in page does not open in Chrome, but rather a separate browser or system page that won't offer to save my password (though it does autofill the username)...
-weird issues using adb... even though I've authorized the computer, and have root access on the phone and am running adb root, it won't let me write to certain parts of the file system (I couldn't adb push bootanimation.zip /system/media/bootanimation.zip error was "read-only filesystem")
I know it's a nightly, just wanted to see if anyone else has these same issues and to make sure the developers are seeing this. For the record, I did a wipe and format (since I was going to change the file system,) and this is a clean install of both TWRP and CM12.
Thanks!
---------- Post added at 06:15 PM ---------- Previous post was at 05:58 PM ----------
breakerwaves said:
So far so good for CM12, everything runs really smooth. Only issues are the default text app send button is grayed out and won't let you send but using Google messenger app it works fine. Is there any reason to why the send button wouldn't work?
LTE seems to work well but visually every now and then it seems to disconnect/reconnect but functions fine. And just a quick/dumb question which CDMA subscription should we use, RUIM/SIM or NV as I found info on RUIM/SIM but couldn't really find much on the definition of NV.
Click to expand...
Click to collapse
I didn't know what to use either so I left it on NV. Haven't noticed a difference in signal or call quality or anything. I am guessing since we're on Sprint and there is no SIM card that RUIM/SIM won't work?
Im am currently running on NV too, but with german sim.
To the other problems you have, I don"t have those. Sms works. CLock works, alarms work... I am running without any themes just switched the stock trebuchet launcher to apex. I am also on f2fs.
I also would like to know the difference between NV and RUI/SIM, and which one should be preffered with simcard mod.
kecksk0enig said:
Im am currently running on NV too, but with german sim.
To the other problems you have, I don"t have those. Sms works. CLock works, alarms work... I am running without any themes just switched the stock trebuchet launcher to apex. I am also on f2fs.
I also would like to know the difference between NV and RUI/SIM, and which one should be preffered with simcard mod.
Click to expand...
Click to collapse
I can't speak to the RUI/SIM issue but I don't know how to switch themes off. As far as my SMS and cLocks idk it is possible that I disabled the wrong app I don't like to run more then the bare minimum. As for the theme I ended up downloading a dark theme from the app store which is wonderful looking!! It is called Nicholas' Dark Material. In case you're looking for dark like me.
Do you have issues with the gallery or camera? I think I saw somewhere on the xt897 forum a link to motorola's camera and gallery apps... are you able to change the save location for pictures or no?
I also had an issue where the navigation bar does not render right when I watch full screen video in landscape mode. May have to do with me forcing GPU render under developer options. I'd take it off but I can't remember how I got there lol
---------- Post added at 11:27 PM ---------- Previous post was at 11:21 PM ----------
I cannot set the custom color for notifications in CM12... but there is a post that says the colors were retained on an upgrade from CM11. Well I wiped and did a clean install rather than an upgrade so is there an .xml file or a settings I can edit? I'm comfortable with file manager and editor and adb and shell...
CM 12 update
I have a simple question so if I am not asking it in the right place, I apologize.
If I do one of the CM12 updates (the nightlies) through the Update in the Settings Menu on my phone, does it wipe the phone? Or does it only update relevant system files and keep my apps and data??
nasch007 said:
I have a simple question so if I am not asking it in the right place, I apologize.
If I do one of the CM12 updates (the nightlies) through the Update in the Settings Menu on my phone, does it wipe the phone? Or does it only update relevant system files and keep my apps and data??
Click to expand...
Click to collapse
If you only apply the update, it will not wipe the device. You would have to wipe it manually in recovery. It will apply a so-called "dirty flash" as you are not wiping any partitions.
CM12-->CM12, should be fine. Of course before you report any issues try a clean flash (or if it's a single app FC'ing, try clearing data on that single app).
I'm having tons of trouble using this with Sprint.
When I lock it to CDMA and/or EVDO mode, Logcat shows that it's trying to connect using a C Spire APN. If I lock it in LTE-only mode and select Sprint APN, it gets a good data connection. The APN menu is foolishly disabled for CDMA/EVDO so I cannot correct the issue. Why is it trying C Spire? How can I fix 3g and MMS settings to work?
CM11 worked great in all conditions, and MMS worked out of the box.
I'm trying to flash CM12 on a FreedomPop device and I'm getting the message "This package is for device: xt987,asanti_c; this device is asanti". I was able to flash CM11 from the nightlies page but no luck with CM12 nightlies nor with the CM12.1 that was posted here on XDA.
Any help to flash CM12 on this device? :good:
Alien987 said:
I'm trying to flash CM12 on a FreedomPop device and I'm getting the message "This package is for device: xt987,asanti_c; this device is asanti". I was able to flash CM11 from the nightlies page but no luck with CM12 nightlies nor with the CM12.1 that was posted here on XDA.
Any help to flash CM12 on this device? :good:
Click to expand...
Click to collapse
In the short term you can change the meta-inf file in the update.zip and change the assert line to allow asanti.
In the future, the CM maintainer probably needs to update the source to allow your device... odd that it worked in CM11 but not 12 tho.
Are you going from CM11 to CM12? Even if you clean flashed.
arrrghhh said:
In the short term you can change the meta-inf file in the update.zip and change the assert line to allow asanti.
In the future, the CM maintainer probably needs to update the source to allow your device... odd that it worked in CM11 but not 12 tho.
Are you going from CM11 to CM12? Even if you clean flashed.
Click to expand...
Click to collapse
Thanks for the tip!
First I tried to flash CM12 directly but got the error. Then decided to try with CM11 and it worked so I hoped it would work to update to CM12 but got the same error again.
Just to double check I'm not doing it wrong, this is what I tried to flash:
CM12 (Failed): http://download.cyanogenmod.com/get/jenkins/107228/cm-12-20150417-NIGHTLY-xt897.zip
CM11 (Success): http://download.cyanogenmod.com/get/jenkins/100850/cm-11-20150216-NIGHTLY-moto_msm8960_jbbl.zip
What I understood by reading around is that for CM12 I should use the xt897 file even though it's differently named than the CM11 one (moto_msm_8960_jbbl).
Can you please confirm that I'm using the correct CM12 one?
Thanks
Alien987 said:
Thanks for the tip!
First I tried to flash CM12 directly but got the error. Then decided to try with CM11 and it worked so I hoped it would work to update to CM12 but got the same error again.
Just to double check I'm not doing it wrong, this is what I tried to flash:
CM12 (Failed): http://download.cyanogenmod.com/get/jenkins/107228/cm-12-20150417-NIGHTLY-xt897.zip
CM11 (Success): http://download.cyanogenmod.com/get/jenkins/100850/cm-11-20150216-NIGHTLY-moto_msm8960_jbbl.zip
What I understood by reading around is that for CM12 I should use the xt897 file even though it's differently named than the CM11 one (moto_msm_8960_jbbl).
Can you please confirm that I'm using the correct CM12 one?
Thanks
Click to expand...
Click to collapse
Yes, that's the correct one.
The CM maintainer clearly states the reasoning in the CM12 thread:
kabaldan said:
Please note:
In CM12, the Motorola 2012 msm8960 device line has been de-unified again, so moto_msm8960/moto_msm8960_jbbl builds are dead from now on.
Please check the xt897 device link for new Photon Q builds.
Click to expand...
Click to collapse
arrrghhh said:
In the short term you can change the meta-inf file in the update.zip and change the assert line to allow asanti.
In the future, the CM maintainer probably needs to update the source to allow your device... odd that it worked in CM11 but not 12 tho.
Are you going from CM11 to CM12? Even if you clean flashed.
Click to expand...
Click to collapse
Adjusting the meta-inf to check for "asanti" instead of "asanti_c" worked perfectly. Thanks for your help!
Now I have to find out why after I flash gapps I start to get multiple crashes related to Google Services and Google Apps.
Edit: Well, just in case someone face the same problem in the future. I updated to the latest TWRP recovery directly from their webpage (initially I used Rashr app) and that solved all my problems, including the initial error when flashing CM12 nightly.
Q&A for [ROM][2.3.6] AEON v1.4SL STABILITY AT ITS FINEST
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][2.3.6] AEON v1.4SL STABILITY AT ITS FINEST. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Where to go from here
Not sure what happened, hope this didn't get posted twice.
Hi,
I am still happily using the Samsung Infuse 4G, and was running the stock GB 2.3.6. No real issues, and although starting to get a sense of it being dated was having no issues and in no rush to go out and upgrade. However, we recently purchased a 2015 Subaru Legacy with their Starlink multimedia system. The Infuse, as it was with the stock GB had no problems connecting via BT for phone and audio functionality. But, the car system reports that the phone is not compatible for messaging. In my endeavors to understand why, I thought, maybe incorrectly, that GB does not support the MAP profile.
So, that led me to, is it possible to add that, and how do you do it, or is it time to upgrade? Flash a new ROM? I can't seem to find much on the specific issue I am trying to resolve and if a new ROM would fix it, but since the phone is way out of warranty I decided to try rooting and flashing a ROM. I am new to this so I went with the Aeon 1.4 ROM based on GB 2.3.6 (I think), hoping that it was a bit less risky. Everything went well and seems to be working fine. But, it did not fix the messaging issue with the car. I assume because it is really still GB.
Am I going about this wrong? Would a flash up to ICS or beyond possibly do it? I am not totally against a new phone, but till now I wasn't even thinking about a new phone. Suggestions? Which ICS, or other ROM would you recommend? Thanks all.
Hi there,
mainwheel said:
Would a flash up to ICS or beyond possibly do it? I am not totally against a new phone, but till now I wasn't even thinking about a new phone. Suggestions? Which ICS, or other ROM would you recommend? Thanks all.
Click to expand...
Click to collapse
I think your car requires the newest bluetooth protocol (4.0), something that is primarily hardware based.
I could be (and hopefully am) wrong here, but the only way to find out is to do a ROM walkabout.
ICS is out right off the bat, as bluetooth was borked in that version (IIRC). You'll need to upgrade to that in the process anyway, as CWM for this device doesn't like drastic changes.
I am biased, but I would try CarbonROM 4.4.4 (the latest, unofficial build) or at the very least CM 10.1. The former would have the best chance of support (being latest firmware available), but it may be overkill for your situation (newer versions = harder on battery life).
So I would try CM 10.1 after stepping up to ICS (having done a full nandroid before all this), and if the car still refuses to connect, try Carbon. Then you may be able to prove me wrong.
Hope this helps.
Sent from my MeMO Pad 8"
joel.maxuel said:
Hi there,
I think your car requires the newest bluetooth protocol (4.0), something that is primarily hardware based.
I could be (and hopefully am) wrong here, but the only way to find out is to do a ROM walkabout.
ICS is out right off the bat, as bluetooth was borked in that version (IIRC). You'll need to upgrade to that in the process anyway, as CWM for this device doesn't like drastic changes.
I am biased, but I would try CarbonROM 4.4.4 (the latest, unofficial build) or at the very least CM 10.1. The former would have the best chance of support (being latest firmware available), but it may be overkill for your situation (newer versions = harder on battery life).
So I would try CM 10.1 after stepping up to ICS (having done a full nandroid before all this), and if the car still refuses to connect, try Carbon. Then you may be able to prove me wrong.
Hope this helps.
Sent from my MeMO Pad 8"
Click to expand...
Click to collapse
Thanks very much for your reply.
Being a hardware issue is something I have considered, but not knowing enough to understand why it might work virtually flawlessly for phone and audio streaming in the car, I was hopeful the hardware would support additional Bluetooth profiles, that are added with a new ROM. But then again, I would not be surprised to do the walkabout and end up at the store for a new phone in the end anyway.
I will be looking for an ICS ROM, but it sounds like it doesn't matter which one I use because I won't be staying there?
I have done, and will do again, backups, but I am little unclear on a few things. CWM is on the phone, but I actually used ROM Manager for the flashing I've done. Are they the same thing? It uses CWM. Also, I've seen various references to making sure the phones identity (not sure that's the right term) is saved, and I take that to mean that after flashing the phone may no longer be able to access phone carrier service. Is that a real possibility? And, is it necessary to remove the SD card? Thanks again.
mainwheel said:
Thanks very much for your reply.
Being a hardware issue is something I have considered, but not knowing enough to understand why it might work virtually flawlessly for phone and audio streaming in the car, I was hopeful the hardware would support additional Bluetooth profiles, that are added with a new ROM. But then again, I would not be surprised to do the walkabout and end up at the store for a new phone in the end anyway.
I will be looking for an ICS ROM, but it sounds like it doesn't matter which one I use because I won't be staying there?
I have done, and will do again, backups, but I am little unclear on a few things. CWM is on the phone, but I actually used ROM Manager for the flashing I've done. Are they the same thing? It uses CWM. Also, I've seen various references to making sure the phones identity (not sure that's the right term) is saved, and I take that to mean that after flashing the phone may no longer be able to access phone carrier service. Is that a real possibility? And, is it necessary to remove the SD card? Thanks again.
Click to expand...
Click to collapse
I would recommend Entropy's ICS build, which I have a mirror of, accessed from my signature link.
ROM manager loads CWM (same author, ROM manager is IIRC just the Play Store delivery mechanism for CWM), so once you have CWM, you are good to go for your walkabout.
Yes, you want to make sure to back up your IMEI information first, because that stuff can get lost, which if lost, will deny you access to your carrier. There is a way to retrieve it if lost on this device, but an ounce of prevention is worth a pound of cure. Check the CM10.x thread on instructions how to flash (with links to the IMEI backup).
No need to remove the SD card, but if you don't need it for a flash, I would remove it anyway (or back up it's contents to your PC first - in case in the unlikely event - I'm paranoid about those things - CWM goes a little liberal with the factory reset).
Hope this helps.
joel.maxuel said:
I would recommend Entropy's ICS build, which I have a mirror of, accessed from my signature link.
ROM manager loads CWM (same author, ROM manager is IIRC just the Play Store delivery mechanism for CWM), so once you have CWM, you are good to go for your walkabout.
Yes, you want to make sure to back up your IMEI information first, because that stuff can get lost, which if lost, will deny you access to your carrier. There is a way to retrieve it if lost on this device, but an ounce of prevention is worth a pound of cure. Check the CM10.x thread on instructions how to flash (with links to the IMEI backup).
No need to remove the SD card, but if you don't need it for a flash, I would remove it anyway (or back up it's contents to your PC first - in case in the unlikely event - I'm paranoid about those things - CWM goes a little liberal with the factory reset).
Hope this helps.
Click to expand...
Click to collapse
Thanks Joel. I have now installed Entropy. Don't know whether everything else is working, but I do know that I can not connect to my wifi. Keep getting "authentication problem." I see that it is a known problem, but I'm not finding a solution. Not quite ready to go the next step (time constraint), so I'm hoping there is a fix, or at least a workaround. Kind of a bummer not having access to wifi. Any suggestions?
mainwheel said:
Thanks Joel. I have now installed Entropy. Don't know whether everything else is working, but I do know that I can not connect to my wifi. Keep getting "authentication problem." I see that it is a known problem, but I'm not finding a solution. Not quite ready to go the next step (time constraint), so I'm hoping there is a fix, or at least a workaround. Kind of a bummer not having access to wifi. Any suggestions?
Click to expand...
Click to collapse
I wouldn't worry about it. Entropy is just a step-through (because BlueTooth is broken as well) and there are other ways to get the other ROMs onto the device (if they are not there already) such as adb push or MicroSD + Built-in Filemanager App. Higher versions will have that fixed anyway.
Downloadable CM 10.1
joel.maxuel said:
I wouldn't worry about it. Entropy is just a step-through (because BlueTooth is broken as well) and there are other ways to get the other ROMs onto the device (if they are not there already) such as adb push or MicroSD + Built-in Filemanager App. Higher versions will have that fixed anyway.
Click to expand...
Click to collapse
Thanks again Joel.
I don't have a lot on my data plan, so I rely on wifi quite a bit. But for now, not a big deal and will try to upgrade asap. No issues with getting the file to the phone, but I am having some difficulty finding a downloadable CM 10.1 (actually it is 10.2), and a gapps file for it. The XDA forum I went to doesn't work and if I go to the mirror site it tells me the file is too big or something and I'm not able to download. Haven't scoured the internet looking for it, thought I might save some time if you know where I can get it. If not, I'm thinking just try the Carbon ROM, assuming I can find it. I know you recommend CM first. George
mainwheel said:
Thanks again Joel.
I don't have a lot on my data plan, so I rely on wifi quite a bit. But for now, not a big deal and will try to upgrade asap. No issues with getting the file to the phone, but I am having some difficulty finding a downloadable CM 10.1 (actually it is 10.2), and a gapps file for it. The XDA forum I went to doesn't work and if I go to the mirror site it tells me the file is too big or something and I'm not able to download. Haven't scoured the internet looking for it, thought I might save some time if you know where I can get it. If not, I'm thinking just try the Carbon ROM, assuming I can find it. I know you recommend CM first. George
Click to expand...
Click to collapse
Hi George,
My signature link contains the CM10.1 ROM (and Gapps) as well. I had problems with CM10.2 back in the day (wouldn't install), so I would recommend 10.1 over 10.2.
My Dropbox may be exhausted for the day (sometimes it gets like that) but I may have a copy on well, Copy, that I could send if necessary. Just let me know if you have problems downloading from my mirror first.
joel.maxuel said:
Hi George,
My signature link contains the CM10.1 ROM (and Gapps) as well. I had problems with CM10.2 back in the day (wouldn't install), so I would recommend 10.1 over 10.2.
My Dropbox may be exhausted for the day (sometimes it gets like that) but I may have a copy on well, Copy, that I could send if necessary. Just let me know if you have problems downloading from my mirror first.
Click to expand...
Click to collapse
Joel,
Maybe I'm just missing something. Not having a problem downloading, I'm having a problem finding the files to download.
The only link I find (it's the link that says something about development files?) takes me to the XDA CM 10.2 forum where I wasn't able to get it. Maybe I'm just missing it in your signature links. I see references to Carbon and other stuff. George
mainwheel said:
Joel,
Maybe I'm just missing something. Not having a problem downloading, I'm having a problem finding the files to download.
The only link I find (it's the link that says something about development files?) takes me to the XDA CM 10.2 forum where I wasn't able to get it. Maybe I'm just missing it in your signature links. I see references to Carbon and other stuff. George
Click to expand...
Click to collapse
George,
Each list item has two links....the original source item (thread), and then the dropbox download link (labelled "download") so you are looking for this.
Hope this helps.
joel.maxuel said:
George,
Each list item has two links....the original source item (thread), and then the dropbox download link (labelled "download") so you are looking for this.
Hope this helps.
Click to expand...
Click to collapse
DOH! Didn't even see that there were two links. Sorry about that. Think I've got everything now, and can find it again if I need it. Now to do the work. Thanks for your help. Will let you know how it goes. George
mainwheel said:
DOH! Didn't even see that there were two links. Sorry about that. Think I've got everything now, and can find it again if I need it. Now to do the work. Thanks for your help. Will let you know how it goes. George
Click to expand...
Click to collapse
Hi Joel,
Got it upgraded to CM 10.1. All seems well. Unfortunately, it did not fix the compatibility problem with messaging and our car, as you correctly suggested might happen. Is there anything about Carbon that gives you reason to think it might work? As I said in the original post, I made some assumptions about the problem (Bluetooth MAP profile based on some reading), and that might be a software fix. But, of course, I may be completely wrong about it. Thanks. George
mainwheel said:
Hi Joel,
Got it upgraded to CM 10.1. All seems well. Unfortunately, it did not fix the compatibility problem with messaging and our car, as you correctly suggested might happen. Is there anything about Carbon that gives you reason to think it might work? As I said in the original post, I made some assumptions about the problem (Bluetooth MAP profile based on some reading), and that might be a software fix. But, of course, I may be completely wrong about it. Thanks. George
Click to expand...
Click to collapse
Hello again George,
Nothing about Carbon in general, but KitKat, yes...
Android 4.4 support for two new Bluetooth profiles to let apps support a broader range of low-power and media interactions. Bluetooth HID over GATT (HOGP) gives apps a low-latency link with low-power peripheral devices such as mice, joysticks, and keyboards. Bluetooth MAP lets your apps exchange messages with a nearby device, for example an automotive terminal for handsfree use or another mobile device. As an extension to Bluetooth AVRCP 1.3, users can now set absolute volume on the system from their Bluetooth devices.
Click to expand...
Click to collapse
Gone this far, might as well give it a shot. :fingers-crossed:
joel.maxuel said:
Hello again George,
Nothing about Carbon in general, but KitKat, yes...
Gone this far, might as well give it a shot. :fingers-crossed:
Click to expand...
Click to collapse
I guess it couldn't stay easy. My attempt to install CARBON (two different download versions) failed, I am getting an error I don't understand.
First, when I go to wipe dalvik I get E: unknown volume for .... (/sd-ext) I can not read it very well because of the background image. Where I put the ... it looks like path.
Then
This ROM uses an imcompatible partition layout
Your /data will be wiped upon installation
Run this update.zip again to confirm install
Then
assert failed: run_program("/tmp/updater.sh") == 0
E:Error in /sdcard/CARBON-KK-NIGHTLY-20141102-0915-infuse4g.zip
(Status 7)
Installation aborted.
Any ideas what this means? I can reload CM 10.1, so I am not bricked or anything. I appreciate your help.
I did try to get some help from the IRC forum at CARBON, but haven't gotten any replies.
George
mainwheel said:
I guess it couldn't stay easy. My attempt to install CARBON (two different download versions) failed, I am getting an error I don't understand.
First, when I go to wipe dalvik I get E: unknown volume for .... (/sd-ext) I can not read it very well because of the background image. Where I put the ... it looks like path.
Then
This ROM uses an imcompatible partition layout
Your /data will be wiped upon installation
Run this update.zip again to confirm install
Then
assert failed: run_program("/tmp/updater.sh") == 0
E:Error in /sdcard/CARBON-KK-NIGHTLY-20141102-0915-infuse4g.zip
(Status 7)
Installation aborted.
Any ideas what this means? I can reload CM 10.1, so I am not bricked or anything. I appreciate your help.
I did try to get some help from the IRC forum at CARBON, but haven't gotten any replies.
George
Click to expand...
Click to collapse
There's this tutorial (section 27), but what may be happening is a drastic change in ROM's for CWM (which falls under what status 7 error scope - along with corrupted IMEI, etc).
My upgrade path long ago (coincidentally) was Stock -> CM9 -> CM10.1 -> Beanstalk 4.4.2 -> CarbonROM 4.4.4.
You can, however cheat, by disabling voodoo lagfix in CWM settings. Otherwise, you may need to find the oldest CarbonROM Kitkat you can grab (4.4.2), to make that last (small) jump to 4.4.4.
If still doesn't work, roll back to CM10.1, make sure everything is order (including calling), and try again.
joel.maxuel said:
There's this tutorial (section 27), but what may be happening is a drastic change in ROM's for CWM (which falls under what status 7 error scope - along with corrupted IMEI, etc).
My upgrade path long ago (coincidentally) was Stock -> CM9 -> CM10.1 -> Beanstalk 4.4.2 -> CarbonROM 4.4.4.
You can, however cheat, by disabling voodoo lagfix in CWM settings. Otherwise, you may need to find the oldest CarbonROM Kitkat you can grab (4.4.2), to make that last (small) jump to 4.4.4.
If still doesn't work, roll back to CM10.1, make sure everything is order (including calling), and try again.
Click to expand...
Click to collapse
Thanks again Joel.
I may have to bag this whole project. Must be a little late doing this. Too much time and trouble searching for files that can't be downloaded. I could not find an early CarbonROM KitKat to download. I could not find a BeanStalk to download. I find links that point to a defunct website. I did finally find a CM11 which I did download, but I did not see a gapps file to go with it, unless I can use any 4.4 gapps. Also, when I run CWM there is no reference to lagfix. I appreciate all the help, but I don't want to take any more of your time. George
mainwheel said:
Thanks again Joel.
I may have to bag this whole project. Must be a little late doing this. Too much time and trouble searching for files that can't be downloaded. I could not find an early CarbonROM KitKat to download. I could not find a BeanStalk to download. I find links that point to a defunct website. I did finally find a CM11 which I did download, but I did not see a gapps file to go with it, unless I can use any 4.4 gapps. Also, when I run CWM there is no reference to lagfix. I appreciate all the help, but I don't want to take any more of your time. George
Click to expand...
Click to collapse
Hi George,
Any 4.4.2 Gapps will work. I am uploading one right now (along with older Beanstalk and CM11)...
https://www.dropbox.com/sh/smohomrdx0oqn76/AACfrsgXTEHhDmVtwEWj6EA5a?dl=0
...it may take an hour for files to appear, so keep posted, if still interested.
Also, another way to disable voodoo lagfix (if not found in CWM) is to create a folder on internal storage called Voodoo, and then a folder inside that called disable-lagfix.
Hope this helps.
joel.maxuel said:
Hi George,
Any 4.4.2 Gapps will work. I am uploading one right now (along with older Beanstalk and CM11)...
https://www.dropbox.com/sh/smohomrdx0oqn76/AACfrsgXTEHhDmVtwEWj6EA5a?dl=0
...it may take an hour for files to appear, so keep posted, if still interested.
Also, another way to disable voodoo lagfix (if not found in CWM) is to create a folder on internal storage called Voodoo, and then a folder inside that called disable-lagfix.
Hope this helps.
Click to expand...
Click to collapse
Thanks Joel. I appreciate the help and will try to make some time to install these files. Will let you know. George
joel.maxuel said:
Hi George,
Any 4.4.2 Gapps will work. I am uploading one right now (along with older Beanstalk and CM11)...
https://www.dropbox.com/sh/smohomrdx0oqn76/AACfrsgXTEHhDmVtwEWj6EA5a?dl=0
...it may take an hour for files to appear, so keep posted, if still interested.
Also, another way to disable voodoo lagfix (if not found in CWM) is to create a folder on internal storage called Voodoo, and then a folder inside that called disable-lagfix.
Hope this helps.
Click to expand...
Click to collapse
Hi Joel,
Unfortunately, none of these 4.4.x versions will install, same error. And placing Voodoo/lagfix/ folder doesn't seem to work either, same error. If the problem is the jump to the next version is too great, maybe an earlier version of something, 4.2 or earlier? George