I've been a member for quite a while, but don't think I've ever posted so please take it easy on me . I bought my husband a MyTouch 4g Slide and liked it, so I bought myself one (both used from Ebay). With my husbands, we had the black screen occasionally. I did some research and with a quick fix of the cover blocking something and switching it around - :victory:**** all set.
Mine (still running original software was running fine. Well, my youngest of 5 kids was apparently playing a game and got frustrated because it kept freezing or something and hit or banged the screen from what he told me -----
Anyway, when he gave me the phone it was this kind of white/reddish fuzzy looking color. I turned it off and tried to reboot. (yes, I've pulled the battery) and aside from the tiny little red light (LED) or the small green one in the same corner OCCASIONALLY coming on and an occasional vibration at that time - NOTHING, NADA, ZILCH....
On the good side, I didn't totally lose it and start screeming at him .... on the bad side, I have a phone I just bought (and like) and can't use it. I know that it might be a just toss and rebuy, but before I do, is there something we can replace (digitalizer/screen/etc)??
You guys up here are amazing and it's the first place I think to come for any of the phones we've had (HTC, MyTouch, SideKick) and I'm so thankful for the site. I figured if I was going to get right to the point and get a straight up answer, without getting scammed, this is the place.... sooooo, anything is better than nothing! Thanks!
Hello. Sounds to me like the LCD screen blew out. They blow out easily from being banged around pretty hard, especially on this particular phone. If the light turns on, then the phone is still alive. If it vibrates as well, then it's definitely still good, as the system is obviously still running. You should try replacing the LCD screen. If you've never done this type of thing, then I'll tell you this... it won't be very easy at all. HTC put so much damn adhesive all over this phone, it's ridiculous. They even glued the LCD to the digitizer, & really tight too.
If you try to do it yourself, or have someone do it for you, be very careful. You can get screens for cheap on ebay, but it may be troublesome to get it done. It's also hard to put them together while preventing dust from getting in there as well. Lint-free micro fiber rags, & maybe a hand air pump, will be very helpful to have around. You can see disassembly videos & tutorials online, like from repairsuniverse.
3ndymion218 said:
Hello. Sounds to me like the LCD screen blew out. They blow out easily from being banged around pretty hard, especially on this particular phone. If the light turns on, then the phone is still alive. If it vibrates as well, then it's definitely still good, as the system is obviously still running. You should try replacing the LCD screen. If you've never done this type of thing, then I'll tell you this... it won't be very easy at all. HTC put so much damn adhesive all over this phone, it's ridiculous. They even glued the LCD to the digitizer, & really tight too.
If you try to do it yourself, or have someone do it for you, be very careful. You can get screens for cheap on ebay, but it may be troublesome to get it done. It's also hard to put them together while preventing dust from getting in there as well. Lint-free micro fiber rags, & maybe a hand air pump, will be very helpful to have around. You can see disassembly videos & tutorials online, like from repairsuniverse.
Click to expand...
Click to collapse
Thanks so much!! My husband and son "TINKER" with things like this....mostly bigger stuff like cars and all ... LOL... but lately a little bit with our laptops/psp type stuff. However, if I could find someone who does this a lot and it wasn't too expensive, that would probably be easier, especially with all the kids around here . Any idea where I could search for a reputable person (ebay, etc???). Also, when you say LCD, that would be like the ones I've seen on ebay that say LCD with digitalizer....right?? I really appreciate the info. I was hoping it might be something like that, something at least "possible". You rock. I'll let you know how it turns out.
it is a pain! and yeah it does sound like the lcd needs to be changed out, careful now because there are multiple lcds that htc used and they arent compatible, i would suggest opening it up first and then seeing which one to order
HERE IS SOME INSIGHT if you look to the third page or so you can see my experience with this phone. if you have someone who likes to tinker give them the project, as much of a pain as it is... its not too bad still i will suggest having them do a little research first though
good luck!
chixwithkidz5 said:
Thanks so much!! My husband and son "TINKER" with things like this....mostly bigger stuff like cars and all ... LOL... but lately a little bit with our laptops/psp type stuff. However, if I could find someone who does this a lot and it wasn't too expensive, that would probably be easier, especially with all the kids around here . Any idea where I could search for a reputable person (ebay, etc???). Also, when you say LCD, that would be like the ones I've seen on ebay that say LCD with digitalizer....right?? I really appreciate the info. I was hoping it might be something like that, something at least "possible". You rock. I'll let you know how it turns out.
Click to expand...
Click to collapse
To have someone do it, I think it'd probably be best to search locally for a repair shop. If you live anywhere near a big city, they probably have some cell phone repair shops around that would be able to do it for you. Even check craigslist.
As for the screen itself, there are 2 parts. There is the LCD screen, or the actual TV screen itself, & there is a sheet of glass placed on top of it. That sheet of glass is called the digitizer. It is what senses your touch. The manufacturers seems to love gluing them together nowadays. Not like the myTouch 3G Slide which was not glued together & was so easy to take apart & deal with. But yeah, the LCD is the actual TV screen. That's what you likely need to change.
Related
I dropped my touch pro and cracked the screen in a few places. I think it works normally except for the screen, as it receives calls fine...
A new phone isn't in my budget right now. Does anyone know of a good place (hopefully in DC, MD or VA) that will supply or install a replacement touch screen?
(btw, no recent threads came up when I searched.)
Ebay!
Just looked, $30 including postage for a screen & digitiser if you are able to do it yourself.
How hard is it to replace a screen if it has surface damage? Is there anywhere i could find a walkthrough or help?
Shame man, its a tragedy of what happened to your phone...
Luckily its not too bad, and you may just be able to fix it. You can download the service manual for the phone here: http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
Just a note though, make sure you DO USE tweezers or something to get the speaker wires out of the way before snapping the enclosure back into position... I had to reopen the phone again, after powering it, to rejoin one of the little wires thats like a tenth of a millimeter thick DO NOT IGNORE ANYTHING THEY TELL YOU IN THE MANUAL. Oh, and what works well for the "plastic removal tool" is a cut out piece of plastic ice cream container. AGIAN, do not ignore anything in there... You are voiding the warranty permanently when you do it yourself (which you unfortunately have to).
Anyways, good luck!
I drop my phone also, but the screen didn't actually cracked! but I do have is problems with the screen in other ways! Sometimes I get a black screen when I turn on the phone and sometimes not, but when the screen turns on, it flickers a lot and have lines thru it. What suprises me is that sometimes I get perfect images on the screen (Which makes me think that the screen it's not damaged).
Any suggestion would be apreciated. Thanks!
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
a.mendoza said:
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
Click to expand...
Click to collapse
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
maxh said:
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
Click to expand...
Click to collapse
Thanks for the advice! I was thinking on that also and wanted to take my chances opening the phone (oh god!).
BTW, I saw the $30 LCD Screen+Digitizer combo on ebay that Beeble referred to, but I'm not sure if it fits on the fuze (my model). What have come to my mind it's to buy also the front camera of the phone (like a thread on the kaiser) to mod the cell, in case I need to buy the screen+digitizer. I've search all threads about this issue but nobody has done it because it was too expensive for the result; I believe with this price it's worth it right now!
solved
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
I used Diamod (!) LCD and Touch Pro digitiser. Works perfect.
Much more cheaper
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
-G-Rey--- said:
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
Click to expand...
Click to collapse
WOW! What a long way to get to the screen. Good luck for everyone who tries to dismount and mount the Raphael.
maxh said:
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
Click to expand...
Click to collapse
Thanks for the advise maxh,
I just wanted to let you know that a miracle just happened! my cellphone started to work just fine without even opening the phone! it has more than a week on this situation so I believe that it's exactly what you stated (the LCD conector became unseated or loose). Since it's still working, I have no need to open it! so I'll just wait until it becomes defective again and at that point just open it and tight up the LCD connector!
Anyway, I would love if somebody could make the mod that I was refereing to before (changing the screen of the fuze by the touch pro one) and see if it's possible to attach the front camera on the fuze.
Once again, thanks everybody for your opinions.
I got my new display+ digitizer on Ebay (65$) and replaced it, using the russian link mentioned above ( follow the exact procedure) , it took me 2 hours to do it, and after lot of patience it worked! My problem was the digitizer never worked fine, and after replaced it it worked like never before. If You are not familiar with repairs, it will be a mistake and waste of money to buy a display without digitizer. NOW, I have a small problem, my display has a NEW color, it's like color temp is WARM for this display, and COLD for my old display, AND COLOR level is lower, and the result is display without vivid colors, black like gray. Is there any way to change the DISPLAY color settings?
Hey guys, the GF left her phone up high and was knocked down and now the screen seems to be dead. Lights up for a moment when turning on then just goes dark. Pretty sure it's operating fine underneath (still need to plug in to computer to check for connectivity), but assuming just the screen needs to be replaced, what are my options?
Is that something I could possibly replace or perhaps send it off to somebody on this forum for repair? How much ($) are we looking to fix? Better to just sell on ebay?
Thanks!
I did a quick search on ebay concerning a new LCD for the Atrix 2 and they seem to cost around 80 bucks... I don't know if that would be a worthy investment since depending on your contract you can maybe get a new one for about that price...
What I can tell you from personal experience is that it is most likely to be a major pain in the ass to replace the screen on your own... I once changed the front frame of my HTC Desire and I basically had to disassemble EVERYTHING including unglue-ing the touchpanel from the frame taking out all sorts of boards and stuff, and I never got rid of the little dust that would get between digitizer and LCD..... (the memories )
But I'd say if you're confident in your technical skills and a new LCD would be worth your money then you might consider going for it...
I don't know but I'd estimate the cost of a professional repair around $150-$200...
One tip just in case: Make sure that no dust gets onto your screen/on the inside of your tuchpanel because once you start "cleaning" it off (with a towel) you'll never get it as clean as it was...
Hey All, Trying to help a coworker of mine. She dropped her phone the other day, and her screen now looks like this.
(PIC is in attachment)
Would something like this be the result of a damaged screen, or a contact that came loose in the phone. And would you even bother fixing this?
Thanks!
If the Device is Un-Rooted, and she has T.E.P. I would suggest taking it in to Sprint. It's the easiest way. That does look like a Hardware issue. It could be any of several things. I suppose you've already tried a Reboot ? If that didn't resolve it, and it's Un-Rooted take it into Sprint.
Sadly, no TEP.
Yeah, it's been rebooted many times. I took it apart even, to make sure all the connections looked good. Still got this issue.
You could try and find a cheap screen for it (amazon) and replace it
sent from a nuclear explosion
swolltitan said:
Sadly, no TEP.
Yeah, it's been rebooted many times. I took it apart even, to make sure all the connections looked good. Still got this issue.
Click to expand...
Click to collapse
UGH . No T.E.P is not what you wanna hear. Unless your willing to take it all the way apart and replace the Digitizer assembly. The reason I say assembly, and not just the Screen is because of the way the sceen appears to be acting. It will be a safer bet to replace it as an assembly instead of just the LCD Screen. It will also be slightly easier. It is not an entirely difficult job. You just have to be very, very careful, and take your time. Wear latex Rubber Gloves, and work in as clean an environment as you can get. I like to work late at night when no one is awake. If you do decide to do it there are Videos I can link you to, or you can Google them. Your other option is to take it to a Cell Phone repair shop. Usually for a reputable place your looking at between $60 - $100 for a LCD / Digitizer replacement.
For anyone who cares it's just the digitizer. Cracked but still functioning. I found LCD/DIGI replacements on ebay for $50. I also found videos on youtube of what to do.
I also saw some horror stories in the video's comments. Everything from broken LCD (they tried DIGI replacement only) to ripped motherboard ribbons to "I did everything right but the phone doesn't work anymore."
If I attempt this, it will be the first time I've replaced hardware on a phone.
Have any of you attempted and successfully replaced the digitizer, lcd screen or both in a bundle?
If so, what were the hardest parts? Anything I need to pay special attention to? Any special tools needed for the job, or will the torx bit and something plastic to pry with be enough? Any other advice?
Money's not so tight that a new phone isn't out of the question, but I like this one and would rather not have to go through all the nonsense of rooting and getting things set up again if I can avoid it.
Thanks in advance for the feedback.
Make sure you don't loose any screws keep them seperated for easier replacement. Also make sure that everything is back where it is supposed (cables) to be or your phone isn't going to work...then you'll have to repeat the whole thing! Good Luck.
- hit my thanks button if i helped you -
Thanks for posting up.
I watched a couple videos already and one did mention that the screws should be separated because they aren't all interchangeable with each other.
Fortunately, I'm not a complete bafoon when it comes to doing stuff like this. It's just that it's going to be the first time I attempt it on something so delicate. What took one guy 20 minutes in a video will probably take me much longer, as all new ventures do for people.
Any advice regarding glue or ribbons? Or will going at it with a delicate touch be enough?
Whatever people in videos say/do is probably what you should do. So if they do stuff with glue or ribbons then you should do that.
- hit my thanks button if i helped you -
Hey everyone,
It's been a while since I last posted on here, and in attempting to avoid a pessimistic undertone, the G7 Power is actually a really good phone: the battery really does last for ages (I charge it once every two days, and it has never been below 40%), and it is surprisingly loud (everywhere). I am a pretty casual user now, rarely playing games or other media, but I am impressed with the difference compared to upgrading from a Moto G4. Some apps which appear as though they were designed for more premium screens - logos, icons, widgets - definitely lose some fidelity around the edges and these can look a bit poor on the 720p screen, but I have become oblivious (or distracted from) a lot of the finer details already.
And now the question: where, and how, would I be able to repair a cracked screen?
It feels like a pretty silly question; but the screen has 'developed' a crack from the bottom-right corner of the new notch, to about 2cm underneath the power button.
I say develop, as the phone is always within eyesight or kept in a pocket. It has never been dropped onto a surface harder than a pillow, and the case/screen protectors are still yet to arrive. It has been in my possession for about 12 days, and it lasted for 6/7 of those. I still have no clue when or why the crack appeared.
The question is a combination of where/when/how, I have contacted Motorola Technical Support, and explained the situation leading up to the cracked screen. The response was (exactly): "we do not process repair of the screen, what we offer is replacement of the whole device", they also said that this service will cost a fee (shipping + device) depending on the IMEI information. A single crack on the screen resulting in the replacement of a whole device seems pretty excessive, and the support member did not acknowledge that it is a brand new phone, or that it is* under warranty.
This is the first cracked screen from all previous handsets, so I am not sure what to do: is there any way to avoid replacing the whole device? How does this effect any warranty? What if I/whomever repairs the device creates other issues? When would services and replacement parts become available? XDA always has a someone whom is knowledgeable in these areas, and it would be great to hear some helpful advice from the community on how to proceed,
Thanks all,
MrSpuddy
(Also - the phone was bought directly from the Lenovo website - and I was hopeful that the "one free screen replacement" still worked)
mrSpuddy said:
Hey everyone,
[ quote edited to save space]
And now the question: where, and how, would I be able to repair a cracked screen?
Click to expand...
Click to collapse
Please see the teardown video here: https://forums.androidcentral.com/m...-power-xt1955-disassembly-teardown-video.html
I repair a lot of phones as a hobby. And phone that are assembled front to back are hard as hell to fix. You have to remove pretty much everything to get to the screen. Contrast that with something like the Pixel phone where the screen is connected last. You just have to pry up the screen and unplug the cable. Fixing the screen on the Moto G7 may not be worth it.
My recommendation is to use your phone as long as you can and then buy a new one. Hopefully by then it will not be as expensive as it is now. I know, it is not much of a solution...
zerogun said:
Please see the teardown video here: https://forums.androidcentral.com/m...-power-xt1955-disassembly-teardown-video.html
I repair a lot of phones as a hobby. And phone that are assembled front to back are hard as hell to fix. You have to remove pretty much everything to get to the screen. Contrast that with something like the Pixel phone where the screen is connected last. You just have to pry up the screen and unplug the cable. Fixing the screen on the Moto G7 may not be worth it.
My recommendation is to use your phone as long as you can and then buy a new one. Hopefully by then it will not be as expensive as it is now. I know, it is not much of a solution...
Click to expand...
Click to collapse
The solution provided by the company was just to buy a new phone; which was not very helpful at all. My collection of screen protectors arrived, and the one on the phone is a lot more robust than the original screen.
Thank you for providing the video.
These screens are very easy to replace... Multiple times...
I have the moto g7 and I have replaced the screen four times, and I'm getting another screen in the mail this weekend, because this *[email protected]_-HJN' SUCKS DONKEY WHATEVER. I like the phone, but for some reason, the screen doesn't like to stay in one piece. All you need is a hair dryer and a new screen. Amazon has them. But you have to watch out; there are counterfeits out there. Buy from two different vendors, and return the counterfeit. Here's how to tell: make sure the printing on the ribbon cable is the same as the one you're replacing. Make sure that the printing on the back plate is the same as the original. You won't know until you take the screen off, which replacement is legit. But it's just one connector and some glue. Way easy, or mail it to me and I'll fix it.