My fuze screen has became way to loose in the closed position. To provide a better example its like its got a hinge and wants to flip open rather then slide open. There is way too much up/down movement that way. Its so loose that when it vibrates the screen will vibrate on the casing and it makes or horrible rattle sound that makes me cringe every time I hear it. I have to hold the phone tight in my hand to stop the rattle. The weight of the screen will actually cause it to partly open by just flipping the phone over and holding the back.
Aside from duct tape, any good ways to fix this or tighten the mechanism that holds it position?
I have a similar problem but not as severe. Mine is just a smidge loose and when I press down on the side of the screen it slides a few millimeters and it's really annoying when I hold the phone. Any help fixing would be appreciated.
yea same here, it's not annoying but I don't trust it
qtipextra said:
Aside from duct tape, any good ways to fix this or tighten the mechanism that holds it position?
Click to expand...
Click to collapse
When I originally mentioned duct tape, I was being sarcastic. Ironically, however, this is my fix to this problem.
I used the Gorilla Tape brand, because that's what I had. All I did was put three pieces of black gorilla tape on the back of the slider. This tightened it up, and stopped my annoying rattle. Pretty simple and easy fix.
Also, it made the snap feel when it slides out much more firm, and I really enjoy the feel of it much more now.
The myTouch 4g is a good, reliable phone. When, rooted, it is even better. We happily flash ROMS away, without a care in the world. One day, however, your power button just stops working . Dread, fear, and despair right? Well there is hope! If your power button doesn't work, there are a couple of things you can do before you head for the wallet to spend big bucks on a new phone.
1. Send to HTC.
The most recommended thing to do is to check if your phone has warranty and send it in to HTC if it does. You can either call (preferable) or send in a e-mail. Remember, even if you are rooted and you send in you phone with a custom ROM, HTC will not charge you unless you remove the "VOID" sticker in the back. This is the painless, easiest method, with little effort required, *although you will have to survive without your phone for atleast a week (which was hell)
No warranty?
If your phone is out of warranty, or if you removed the VOID sticker for whatever reason and Dont feel like paying HTC $125 to fix it, there a couple of things you can do.
2. Jury-Rigging (self-fix method)
This method is for those that are comfortable opening up their phone and want to fix the power button for themselves.
*Tools: aluminum foil, Torx T5 screwdriver, small phillips screwdriver, safe-open pry tool.
This idea was inspired from XDA user jjbadd385 who mentioned in a thread I can't quite remember that he had turned on his phone by using aluminum foil to touch the actual power button underneath the outer casing. I recommend using this thread and video http://forum.xda-developers.com/showthread.php?t=1591388 to safely open up the phone. Ofcourse, you wont need to dismantle the whole phone, all you need to do is remove the outer casing (black rubber thing the surrounds the edges of the phone). Just do the First step from the guide provided. BE CAREFUL not too lose a little spring that is located near the power button, without it your power button will feel like "its stuck", but the spring itself is NOT necessary to turn the phone on. You will then see your actual power button at the top of your phone. Now here comes the fun part. Using your eyes, and common sense, cut out a small piece of aluminum foil that is about roughly the same size as the power button. Using your hands or the pry tool, bend the aluminum so that it comfortably fits in that little square area directly on top of the power button. Now carefully put the rubber casing back, be wary of the aluminum falling out of place. It may take some patience, but it shouldn't be too difficult. If put correctly, your phone should now start up! Now your power button should work whenever you click it
***If for some reason it doesn't, there could be a problem with the actual ribbon itself (which would be unfixable unless u bought a new ribbon), but most likely the aluminum foil probably was not placed right or was moved putting the casing back on.
****If enough people request, I'll probably make of video/picture slides of the Jury-Rigging method, but right now I have to study for my Sociology test and I'm too lazy
*******************************************************************
Want to turn on your phone, but you don't have the tools for the Jury-rigging method and you need your phone NOW?
If you are UNROOTED: (this method is untested by me) From doing a quick google search, there have been people who have turned on their myTouch 4g by simply connecting the phone to the charger and immediately holding the HOME button for about 5-10 seconds. Some have had success with this, but personally, It has not worked for me.
If you are ROOTED and your phone has these things:
Clockworkmod Recovery 5
ADB debugging enabled
You must have adb debugging already enabled on your phone or else this will not work! Even though the phone is powered off, commands somehow still go to the phone!
Make sure to set up ADB on your computer (there are multiple guides in XDA)
-Then simply connect your phone to your computer, open your terminal. Check to see if your computer reads your device by running this command:
Code:
adb devices
If your computer reads it, then you'll be all set!
Then, run the command:
Code:
adb reboot
Give me lifeee! Your phone should then reboot!
THANKS
to jjbadd
to repairsuniverse for the excellent video/instructions
to my myTouch 4g. Its a love/hate relationship
to anyone else i somehow forgot
and to XDA --sharing is caring
**** Please Give "thanks" if I helped revive your phone and please donate to my college books fund!!
I want to add that underneath the outer case, and sitting on top of the flex ribbon, is a very very small piece, that adds that "spring" to the outer button itself, & it falls out of place. Mine did, and to my suprise, when I opened my phone, I apparently lost it because it was nowhere in sight. Also, I have a 4ext recovery image, that was compiled specifically for me by madmaxx82, that when I flashed it, I can power my phone completely down, then plug in the charger, & it will automatically boot up into recovery. I then select "reboot" and it reboots my phone normally. It's a neat little utility, that keeps me from cracking my phone open.
Sent from my HTC Glacier using XDA Premium
jjbadd385 said:
I want to add that underneath the outer case, and sitting on top of the flex ribbon, is a very very small piece, that adds that "spring" to the outer button itself, & it falls out of place. Mine did, and to my suprise, when I opened my phone, I apparently lost it because it was nowhere in sight. Also, I have a 4ext recovery image, that was compiled specifically for me by madmaxx82, that when I flashed it, I can power my phone completely down, then plug in the charger, & it will automatically boot up into recovery. I then select "reboot" and it reboots my phone normally. It's a neat little utility, that keeps me from cracking my phone open.
Sent from my HTC Glacier using XDA Premium
Click to expand...
Click to collapse
yeah, I too lost the spring as well! good catch!!
I too use to do pretty much the same thing (plug-in the phone to turn it on) But now with the aluminum foil in-place inside the phone, I can use the power button whenever!
Thanks again for the insight about using aluminum foil!
Alternate material option
I had a similar issue with my power button and came to this solution also but instead of aluminum foil I used a piece of disposable aluminum cookie sheet because it was thicker and has some spring in it. I started with aluminum and it didn't work so well - I think the aluminum foil deforms too much to work reliably over multiple operations.
But if you can get your phone replaced by the carrier or manufacturer do it because these things aren't made to be repaired.
mytouch4g-user said:
I had a similar issue with my power button and came to this solution also but instead of aluminum foil I used a piece of disposable aluminum cookie sheet because it was thicker and has some spring in it. I started with aluminum and it didn't work so well - I think the aluminum foil deforms too much to work reliably over multiple operations.
But if you can get your phone replaced by the carrier or manufacturer do it because these things aren't made to be repaired.
Click to expand...
Click to collapse
Good call, the cookie sheet was certainly tougher, but not much of a big difference i guess.
Thank for the tip
And yeah, HTC seriously f'ed p with the power button in this phone. It was just desined pretty much to fail evntually lol.
Hey man would you be so kind to sharing that little piece of genius with me/us? Im one of the unfortunate ones that has this problem. PLEASE!!!!!!!!!!!!!
jjbadd385 said:
I want to add that underneath the outer case, and sitting on top of the flex ribbon, is a very very small piece, that adds that "spring" to the outer button itself, & it falls out of place. Mine did, and to my suprise, when I opened my phone, I apparently lost it because it was nowhere in sight. Also, I have a 4ext recovery image, that was compiled specifically for me by madmaxx82, that when I flashed it, I can power my phone completely down, then plug in the charger, & it will automatically boot up into recovery. I then select "reboot" and it reboots my phone normally. It's a neat little utility, that keeps me from cracking my phone open.
Sent from my HTC Glacier using XDA Premium
Click to expand...
Click to collapse
elivaldez84 said:
Hey man would you be so kind to sharing that little piece of genius with me/us? Im one of the unfortunate ones that has this problem. PLEASE!!!!!!!!!!!!!
Click to expand...
Click to collapse
Check your PM. I'll try to help anyway I can. If anything re-read the guide
Thank you so much! Foil method worked perfectly when I thought my phone was doomed.
This idea was inspired from XDA user jjbadd385 who mentioned in a thread I can't quite remember that he had turned on his phone by using aluminum foil to touch the actual power button underneath the outer casing. I recommend using this thread and video http://forum.xda-developers.com/showthread.php?t=1591388 to safely open up the phone. Ofcourse, you wont need to dismantle the whole phone, all you need to do is remove the outer casing (black rubber thing the surrounds the edges of the phone). Just do the First step from the guide provided. BE CAREFUL not too lose a little spring that is located near the power button, without it your power button will feel like "its stuck", but the spring itself is NOT necessary to turn the phone on. You will then see your actual power button at the top of your phone. Now here comes the fun part. Using your eyes, and common sense, cut out a small piece of aluminum foil that is about roughly the same size as the power button. Using your hands or the pry tool, bend the aluminum so that it comfortably fits in that little square area directly on top of the power button. Now carefully put the rubber casing back, be wary of the aluminum falling out of place. It may take some patience, but it shouldn't be too difficult. If put correctly, your phone should now start up! Now your power button should work whenever you click it
Click to expand...
Click to collapse
My phone would not turn on after I dropped it on a hard floor for at least the hundredth time (Silly name aside, I LOVE this phone for its durability and the fact that I bought it almost 2 years ago and its features are still on par with most phones out there!!). I had almost bought a new phone earlier in the day before trying one last time to find a solution online. I am so glad I found this post!
I used the foil method, although I didn't have a torx 5 handy, I was able to safely pry the frame apart enough to access the power button and put some foil on it. I am pretty sure I lost the spring before I even attempted the fix. There was also a small amber plastic square with a small metal bump in the center covering the switch poles - seemed like it might have once had to do with powering on the phone, but I took it out and now the phone powers on fine with the foil.
THANK YOU SO MUCH FOR POSTING!!!
jjbadd385 said:
I want to add that underneath the outer case, and sitting on top of the flex ribbon, is a very very small piece, that adds that "spring" to the outer button itself, & it falls out of place. Mine did, and to my suprise, when I opened my phone, I apparently lost it because it was nowhere in sight. Also, I have a 4ext recovery image, that was compiled specifically for me by madmaxx82, that when I flashed it, I can power my phone completely down, then plug in the charger, & it will automatically boot up into recovery. I then select "reboot" and it reboots my phone normally. It's a neat little utility, that keeps me from cracking my phone open.
Sent from my HTC Glacier using XDA Premium
Click to expand...
Click to collapse
You should share that recovery image
I lost it. I asked him for it again and he sent it..but it don't work for me now. However if u email madmaxx82.. tell him what u want, I'm almost positive he will oblige. He a really cool dude. I've since put foil under my button and its working great.
Sent from my Dark Unicorn Ressurected HTC Glacier
I bought the MT4G used so I just want to confirm, is there only one "void" sticker located beneath the micro SD card slot? Thanks
dinhhviet said:
I bought the MT4G used so I just want to confirm, is there only one "void" sticker located beneath the micro SD card slot? Thanks
Click to expand...
Click to collapse
yes, should only be one. Sorry for the late reply!
Thank you so much!! I thought that was the end of my phone...but good thing I had it rooted and guess I had left on ADB was able to install ADB on my laptop and recover my phone!!! Just have to make sure it's always charged
lmt125 said:
Thank you so much!! I thought that was the end of my phone...but good thing I had it rooted and guess I had left on ADB was able to install ADB on my laptop and recover my phone!!! Just have to make sure it's always charged
Click to expand...
Click to collapse
Since I had to do this for myself last month, I thought I'd throw in a couple of little things I gathered from the process.
- My symptoms were that my power button would not 'register'. It had less feedback and gradually grew harder and harder to activate until eventually I couldn't get it to work at all. Other than a couple of small drops, I hadn't put it under any serious stress. I did the cable-boot thing for a while (in combination with a sleep button app), but eventually got tired of it and decided to pop the case open.
- You absolutely need a T5 screwdriver, and they can be a little tricky to find (many driver sets don't go down past T7). Home Depot has a generic driver set that does include a T5 bit. The safe-pry tool is optional (you can use a small, flat screwdriver head if you are _careful_).
- My phone was never serviced, so the third T5 mentioned in the guide is under the VOID sticker at the bottom of the back. Once you take those three screws out, you can use your fingertips to make a gap between the front bevel and the rubber, then pry _gently_ to loosen the clips.
- Once you have released all the clips, the construction of the power button assembly looks like this:
Button -> piece of film -> metal disc (this is the 'spring' mentioned in the guide) -> ring-shaped contact on body
In my case, the film and disc had somehow slipped off-center, making it so that I couldn't make it hit the contacts. In this case, all I had to do was line everything back up again (film over button, disc over contact with concave-ish end facing the contact so it 'springs') and carefully clip it all back together. Now my power button works like it did on day one. Obviously this fix won't work if you actually have a flex cable break, but I have a feeling that most people who don't throw their phones around may have this sort of slippage occurring over time, and the fix might be simpler than you think*!
* - unless you break something disclaimer disclaimer disclaimer
tuxkamen said:
Since I had to do this for myself last month, I thought I'd throw in a couple of little things I gathered from the process.
- My symptoms were that my power button would not 'register'. It had less feedback and gradually grew harder and harder to activate until eventually I couldn't get it to work at all. Other than a couple of small drops, I hadn't put it under any serious stress. I did the cable-boot thing for a while (in combination with a sleep button app), but eventually got tired of it and decided to pop the case open.
- You absolutely need a T5 screwdriver, and they can be a little tricky to find (many driver sets don't go down past T7). Home Depot has a generic driver set that does include a T5 bit. The safe-pry tool is optional (you can use a small, flat screwdriver head if you are _careful_).
- My phone was never serviced, so the third T5 mentioned in the guide is under the VOID sticker at the bottom of the back. Once you take those three screws out, you can use your fingertips to make a gap between the front bevel and the rubber, then pry _gently_ to loosen the clips.
- Once you have released all the clips, the construction of the power button assembly looks like this:
Button -> piece of film -> metal disc (this is the 'spring' mentioned in the guide) -> ring-shaped contact on body
In my case, the film and disc had somehow slipped off-center, making it so that I couldn't make it hit the contacts. In this case, all I had to do was line everything back up again (film over button, disc over contact with concave-ish end facing the contact so it 'springs') and carefully clip it all back together. Now my power button works like it did on day one. Obviously this fix won't work if you actually have a flex cable break, but I have a feeling that most people who don't throw their phones around may have this sort of slippage occurring over time, and the fix might be simpler than you think*!
* - unless you break something disclaimer disclaimer disclaimer
Click to expand...
Click to collapse
Thanks for the input!
I bought a used sensation 4g week or so back. Opened the cover, something fell off, I didn't pay much attention and lost it. By the time I realised it was the spring, it was too late using a light sensor software at the moment to lock/unlock the device.
Is the foil method for the above issue? How can the foil create the spring effect. Hmm I guess I'll have to try out for myself though the sensor is working fine too but this post gives some hope.
long story short, my husband dropped my phone and corner hit the pavement. still working but the corner is slightly gapping. i tried to snap it close it but it won't close. i am afraid to leave it like it is because water might seep in. any idea what tools i need to snap.this thing together again?
Sent from my SAMSUNG-SGH-I727 using xda premium
My recommendation would be a nice, tight TPU case. Failing that, I've never had problems with the tinest of tiny drops of crazy glue when repairing old phones, but I'll defer to others if someone's actually used a tool to rebuild a case.
T.J. Bender said:
My recommendation would be a nice, tight TPU case. Failing that, I've never had problems with the tinest of tiny drops of crazy glue when repairing old phones, but I'll defer to others if someone's actually used a tool to rebuild a case.
Click to expand...
Click to collapse
The thing with crazy glue it leaves that white residue sometimes, I'd do the tight tpu case
Duck tape if all else fails j/k
evil_ryu said:
The thing with crazy glue it leaves that white residue sometimes, I'd do the tight tpu case
Click to expand...
Click to collapse
I'd never advocate introducing crazy glue to phones, but if you get the gelatinous kind and use the tiniest of tiny amounts on a thumbtack, wipe off any excess with a little piece of paper towel right away and either tape it together tightly or hold it in place for 5 minutes or so, you can make it look like nothing's happened.
But again, introducing crazy glue to your phone can potentially do a lot more harm than good, and may well look like crap. If you do it, any ill effects are your own fault, not mine. If it works, it'll hold forever and look great. Always the potential that it doesn't, though...
thanks. i only have one option for case since i am using qcell ext batt
Sent from my SAMSUNG-SGH-I727 using xda premium
When you close the tablet with the dock, does it shut evenly? On mine, it seems there's a tad more space on the left side than the right making it look uneven.
odorfreedk said:
When you close the tablet with the dock, does it shut evenly? On mine, it seems there's a tad more space on the left side than the right making it look uneven.
Click to expand...
Click to collapse
The dock has three little rubber things, right and left from the bottom key row and below the touchpad. When I shut it, the screen of the pad sits on all three of them. So, I can't complain, it's shutting properly.
Mine shuts properly.
However, turn the dock over, carefully peel the top two pads and tighten up the screws as mine and others have seen that they are very lose. This may keep the hinge and back from flexing when closing.
sbdags said:
Mine shuts properly.
However, turn the dock over, carefully peel the top two pads and tighten up the screws as mine and others have seen that they are very lose. This may keep the hinge and back from flexing when closing.
Click to expand...
Click to collapse
I would be careful. My pads lost control of themselves and disengaged. After that the screws fell out. Even with superglue I cant get things back together. The plastic just doesnt get a hold.
I hope to get a repair (for 125€ OMG)
sbdags said:
Mine shuts properly.
However, turn the dock over, carefully peel the top two pads and tighten up the screws as mine and others have seen that they are very lose. This may keep the hinge and back from flexing when closing.
Click to expand...
Click to collapse
I did take off the pads and tighten all the screws on all 4 corners. They were already pretty tight to begin with. I think I might try unscrewing the hinge and see if I can do anything. Perhaps, the screws on the hinge need to be tightened.
odorfreedk said:
I did take off the pads and tighten all the screws on all 4 corners. They were already pretty tight to begin with. I think I might try unscrewing the hinge and see if I can do anything. Perhaps, the screws on the hinge need to be tightened.
Click to expand...
Click to collapse
Have any luck tightening the hinge?
zeddock
I know there are guides ALL over the internet, but I wanted to let you guys know what worked for me.
I tried the rice thing at first, and while power was restored, I wasn't able to get any audio, and sound in and out of the phone on calls was either non-existent or distorted and popping.
So what I did was take the phone completely apart. Purchase some 91% Isopropyl Alcohol (although 99% is recommended, because 91% has water content, so use 91% AT YOUR OWN RISK) and a generic toothbrush.
I submerged all parts in the alcohol and brushed every connection, board, chip, and plug vigorously in the alcohol.
After that, I removed the parts to a clean towel and use canned air to blow all of the remaining liquid dry, the best I could. The canned air will ice up after prolonged use so you may need to do this is two steps. Also, make sure liquid CO2 does NOT come out the nozzle (e.g. hold the can right side up, not sideways or upside down). The cold CO2 could damage components, possibly.
Once that was all done, I placed all components into a tupperware container in rice, to draw out any remaining moisture. After about 24-36 hours, I reassembled the device and BAM 100% functional. Longer time in rice may be necessary depending on how precise you are with the liquid removal after the alcohol bath and brush.
Once again, this actually worked for me. If you have any questions, feel free ask away.
I've read somewhere on here that rice doesn't help at all and you should just air dry instead. But other than that, thank you for this walkthrough. Very helpful.
Sent from my SCH-I535 using Tapatalk 2
tylerlawhon said:
I've read somewhere on here that rice doesn't help at all and you should just air dry instead. But other than that, thank you for this walkthrough. Very helpful.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
As an update. yesterday morning when I woke up, my display was dead. Everything else worked including audio, sound, haptic feedback, as far as I could tell.
Phone went back in rice for nearly 36 hours and left in my car, which probably reached over 100 degrees fahrenheit.
Tonight when I got home, display was functional again.
Rice may not be the end all, but it certainly helps wick moisture. The alcohol and scrubbing is necessary for removing the minerals that water leaves behind (which is what conducts and causes shorts); however, I can tell you firsthand, the rice definitely helps.
tylerlawhon said:
I've read somewhere on here that rice doesn't help at all and you should just air dry instead. But other than that, thank you for this walkthrough. Very helpful.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
That stems from the fact that if you let the phone actually touch the rice it will gum up the insides but like the op said iso and a soft tooth brush.... as for moisture what you need is is calcium chloride of some kind(Damp Rid is the kind you get at walmart but you can get it cheaper at agriculture supply stores). And then you put your phone in some sealed container with the calcium chloride, though, make sure your phone isn't sitting in the damp rid itself...
Ok, another update: phone went all day with no issues. Camera is still a tiny bit foggy, and pictures aren't crystal clear. But I may just replace the cameras, they're fairly cheap.