long story short, my husband dropped my phone and corner hit the pavement. still working but the corner is slightly gapping. i tried to snap it close it but it won't close. i am afraid to leave it like it is because water might seep in. any idea what tools i need to snap.this thing together again?
Sent from my SAMSUNG-SGH-I727 using xda premium
My recommendation would be a nice, tight TPU case. Failing that, I've never had problems with the tinest of tiny drops of crazy glue when repairing old phones, but I'll defer to others if someone's actually used a tool to rebuild a case.
T.J. Bender said:
My recommendation would be a nice, tight TPU case. Failing that, I've never had problems with the tinest of tiny drops of crazy glue when repairing old phones, but I'll defer to others if someone's actually used a tool to rebuild a case.
Click to expand...
Click to collapse
The thing with crazy glue it leaves that white residue sometimes, I'd do the tight tpu case
Duck tape if all else fails j/k
evil_ryu said:
The thing with crazy glue it leaves that white residue sometimes, I'd do the tight tpu case
Click to expand...
Click to collapse
I'd never advocate introducing crazy glue to phones, but if you get the gelatinous kind and use the tiniest of tiny amounts on a thumbtack, wipe off any excess with a little piece of paper towel right away and either tape it together tightly or hold it in place for 5 minutes or so, you can make it look like nothing's happened.
But again, introducing crazy glue to your phone can potentially do a lot more harm than good, and may well look like crap. If you do it, any ill effects are your own fault, not mine. If it works, it'll hold forever and look great. Always the potential that it doesn't, though...
thanks. i only have one option for case since i am using qcell ext batt
Sent from my SAMSUNG-SGH-I727 using xda premium
Related
Ok so I did some experimenting these past hours and I've found a terrific solution to the Vibrant/SGS4G creaking issue that many people have encountered!
Heres what you need:
*Papertowel
*Scissors
LOL not much of a list but trust me!
Step 1: Take your battery door off of your phone
Step 2:Cut a rectangular piece of papertowel enough to fit over the battery, sim and sdcard
Step 3: Place the rectangle cut over the back of the phone
Step 4: Now put on the battery door directly over the papertowel peice
IE: You should notice that the battery door now fits tighter and has no space to make contact with the plastic inside, the papertowel acts as a buffer between the plastics - eliminating the creaking noises.
[EDIT] - Don't cut too big of a piece and if its not snapping on as normal i'd suggest not forcing it and reducing the size of your cutout.
Kool ill have to try this if the creaking gets to bad. Thanks bro
Sent from my SGH-T959V using XDA Premium App
Kudos to you lol! Reply back with your findings if you decide to try my method
roadrunnerrd3 said:
Kudos to you lol! Reply back with your findings if you decide to try my method
Click to expand...
Click to collapse
Will do when I try, creaking isn't that bad yet but it will most definetly get worse over time but atleast we can fix that now.
Sent from my SGH-T959V using XDA Premium App
Haven't heard any creaking yet. I've owned a Vibrant and now this. Wouldn't the paper towel cause more heat? I dunno. I'm thinking it's like leaving your laptop on top of your bed effect. But then again it is thin. So I dunno. lol.
The battery door definitely fits a bit loose to the back of the device and makes loose contact with the bezel. What I did was just stick two pieces of scotch tape to the back of the cover side by side which seemed to work fairly well.
Not having to do with the battery door, but if your bezel creaks, some units have loose bezels out of the box. You could try to tighten the screws on the bezel on the back of the bezel (with the cover removed). Of course, I am not responsible if you break it.
Mine creaks around the volume rocker
Sent from my SGH-T959V using Tapatalk
XPLANE9 said:
The battery door definitely fits a bit loose to the back of the device and makes loose contact with the bezel. What I did was just stick two pieces of scotch tape to the back of the cover side by side which seemed to work fairly well.
Not having to do with the battery door, but if your bezel creaks, some units have loose bezels out of the box. You could try to tighten the screws on the bezel on the back of the bezel (with the cover removed). Of course, I am not responsible if you break it.
Click to expand...
Click to collapse
My bezel definitely creaks . So all I gotta do is tighten the screws behind the battery cover right?
Sent from my SGH-T959V using XDA App
icy56 said:
My bezel definitely creaks . So all I gotta do is tighten the screws behind the battery cover right?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
It helped a little on my unit. I don't think it is the bezel itself as it is the battery door contacting the bezel in a manner that causes the creaking. Does it creak if you take off the cover?
This worked great lol
Sent from my SGH-T959V using XDA App
XPLANE9 said:
It helped a little on my unit. I don't think it is the bezel itself as it is the battery door contacting the bezel in a manner that causes the creaking. Does it creak if you take off the cover?
Click to expand...
Click to collapse
mine only creaks with the conver on. a slight tightening of the screws did not help.
Sent from my SGH-T959V using Tapatalk
Somairotevoli said:
mine only creaks with the conver on. a slight tightening of the screws did not help.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
Sorry to hear that. If it creaks with the cover on, then you should try the trick from the OP. My bezel was loose and creaking a little with the cover off. Sucks to be OCD...
Thanks for trying my method guys hahahahaah OCD FTW! Everybody thinks i'm a freak because i get so off kilter with such little things but, glad to see i'm not the only one who had supersonic hearing!
is this the only way to fix it? I am getting pissed of that my SGS is creaking..****ing **** build quality
I don't think its a good idea to do this. The paper prevent heat from dispersing when your phone heats up. If too much heat is generating while you play game or use your phone it might cause the battery to explode.
qpqpqp said:
I don't think its a good idea to do this. The paper prevent heat from dispersing when your phone heats up. If too much heat is generating while you play game or use your phone it might cause the battery to explode.
Click to expand...
Click to collapse
Ok i thought so also but there is no other solution to stop the darn creaking sound?!
Buy a case. Not being a smart ass. I bought a body glove case and have no creaky door issues. Plus it gives the phone a little more mass, makes it feel less cheap and not as slippery.
Sent from my SGH-T959V using xda premium
Exodian said:
Buy a case. Not being a smart ass. I bought a body glove case and have no creaky door issues. Plus it gives the phone a little more mass, makes it feel less cheap and not as slippery.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
already have a tyre case, do u recommend any other case?
Lol, do you guys Chuck Norris grip your phones? I only get that sound when I squeeze pretty hard on my phone.
Also, putting a piece of paper there seems dangerous. My battery gets pretty hot sometimes when I play with it for too long (games, YouTube, etc.). I'm sure that heat would make the paper catch fire. Then again, I'm no fire expert. XD
It might just be the case I have, but I've never heard the phone make any creaking sounds. This is a simple fix though if you have the problem haha.
I need a cheap case that will mainly keep the pocket dust from getting in and under the screen. I've been using a zip lock bag lately....its ghetto I know...but it does keep the water out and let me use the phone while still inside. Any ideas that are a little more fashionable? I do have 10 dollars in ebay credit
Ziplock bags are great! Yet, extremely Ghetto. How much dust you got, man? I don't keep mine in a case, and I have never gotten dust under the screen. Maybe you need to clean your pockets before you spend money on anything other than a box of Ziplock bags.
It seems to be a somewhat common problem. I'm hoping just a silicone cover will be good enough to cover the bezel. It's that and the front controls that are the places that the dust enters. I live in an area where it rains a lot and I ride a motorcycle so looks like ill have to keep these ziplock bags
TheEnternal said:
I need a cheap case that will mainly keep the pocket dust from getting in and under the screen. I've been using a zip lock bag lately....its ghetto I know...but it does keep the water out and let me use the phone while still inside. Any ideas that are a little more fashionable? I do have 10 dollars in ebay credit
Click to expand...
Click to collapse
I worked in a phosphate plant.Sulfuric acid side. I bought a camera case that zipped up. Never had a problem.Could still carry in back pocket when necessary
Sent from my LG-VM670 using XDA Premium App
cooterkong said:
Ziplock bags are great! Yet, extremely Ghetto. How much dust you got, man? I don't keep mine in a case, and I have never gotten dust under the screen. Maybe you need to clean your pockets before you spend money on anything other than a box of Ziplock bags.
Click to expand...
Click to collapse
You're lucky if you don't get dust under the screen. I often put mine in my pocket and now I have alot of dust under my screen
from what I read there are 2 versions of O1, the one with the sd card near the camera is the one with dust problem. I kept my O1 from the moment I got it in a pocket case and still got some dust under the screen. The dust enters around the keys so you must somehow prevent the dust entering there.
Try with amzer silicone case for O1.
soberspine said:
from what I read there are 2 versions of O1, the one with the sd card near the camera is the one with dust problem. I kept my O1 from the moment I got it in a pocket case and still got some dust under the screen. The dust enters around the keys so you must somehow prevent the dust entering there.
Click to expand...
Click to collapse
This is my model and now I understand why I have so much dust.
Sent from my LG-P500 using XDA App
From where can one avail them ? .. and also does a screenguard help ?
Got this case a few days ago and have a couple questions.
1) Do you guys find this case very hard to get off? I feel like I don't want to push hard because it will do damage to the phone. Any tips on removing?
2) Do you find you have to "pull up" on the ballistic corners once you install the case to get everything even? I find that the silicone lays flat in the plastic casing without the phone in it, but once installed I have to work the corners to get the case flat.
Yea I would suggest prying from the side that has no buttons and also yea it is a very snugg fit so u kind have to work it to get the plastic price set into the rubber
I have taken mine off many times with no damage so u should be ok and it all sounds normal to me
Sent from my HTC One X using xda premium
Ok, sounds good. I love the case, just don't want to damage my phone lol. Can't imagine how the Commuter is to take off considering people say that's even harder to remove.
I kind of use my fingernails and pry off the plastic part first by sticking my fingernails in between one of the parts on the side and then using the top/bottom portion for leverage. At first I thought it was gonna damage the phone but nothing has happened yet
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
lambstone said:
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
Click to expand...
Click to collapse
Even if i just got the product there is nothing i can do to get a replacement? I mean isnt there like a 30 day thing if im not satisfied?
Yes there is, but you have to pay half of the price to get a new one
Sent from my SGH-M919 using Tapatalk 2
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
blackguy101 said:
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
Click to expand...
Click to collapse
Yeap, http://www.spigen.com/need1more
You have to be quick, there is a 30days time frame from when you purchased.
I must be just as bad. This is the most frustrating screen protecter to apply. I've been known to mess up once but never had this much problems. It floats off center, fingers holding it and getting in the way. Front plastic made it hard to estimate the edge with the rounded corners, getting caught as well on fingers as I let go pushing it slightly to one side. Unable to pry it back up without barely scraping the adhesive ruining one corner if not multiple edges from micro fuzz etc. The squeegee is worthless on the glass, back protector is fine but just have to deal with it.
Must be me. Oh well. Good thing I get the cheap ass protector with my Neo Hybrid case.
You tried the masking tape method?
Align it the screen protector without peeling off the back cover. Once it's in place, use making tape to hold it in place, like a book. Put some a strip from the front down across onto the phone. You should be able to "open" it like the page from a book. Then apply it. Should make things easier.
a Good company will stand behind their products. After seeing my brother's Hybrid case and reading some things on their customer service, I chose to pass on Spigen.
The clear coat on his bumper part is already chipping way, the whole thing looks like a cheap Chinese knock off ( bought directly from Spigen).
Zagg for example, a product I don't recommend at all because 1) It's a horrible product 2) it's ridiculously expensive. But the only thing they have is pretty much unquestioned replacements. Which I'm sure they can do because of ridiculous markup.
BTW, it might not be your fault at all, because these are rigid glass pieces, they have to be flat in order to stick to the phone. a SLIGHT imperfection will cause it to not stick.
All that being said, I went with MIME glass protector.
I have the glas t and I love it. They are much easier to apply then typical plastic ones as they dont bend and flop around when applying. When I applied mine it lined up perfectly but I did get lint under it right in the middle of the damn screen. I tried dealing with it but couldn't take it so I lifted it half way up with my finger nail and used scotch tape to get the lint off... dropped it back down and it looked even worse. I thought i wasted 27 bucks until the morning when I looked at my screen and bubbles were gone. So it is possible to remove lint just dont touch the adhesive.
Sent from my SPH-L720 using xda premium
just pay the half price spigen charges to replace it and move on. sulk it up as paying for a learning experience.
they already mention that the best method for aligning the thing is to use scotch tape on the top and bottom aligning it then drop down.
if you dont want any dust trapped, well don't mind me for stating the obvious but... don't work in a dusty room, close windows/doors turn off fans... don't breathe too hard on it lol.
use a photo air duster like a Rocket blower, to remove any left over dust/lint from cleaning the screen. I find that camera lens solution and lens paper works perfectly for prepping the surface. use the included stickers to remove any left over dust that cannot be blown away by the rocket blower.
if you can do not reapply once completely set down, when applying make sure it's aligned, bottom edges, make sure the gaps are evenly distributed on all sides, cutout holes centered...
when applying and you notice it is not centered gently lift up but never touch the adhesive side. lift up with only scotch tape.
I've been applying screen protectors for years and have gotten it down to a science... everyone comes to me to get theirs installed haha...
Once any part of this is adhered scotch tape is useless as it's glass. you have to use a suction cup or your finger nail you just have to be careful.
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
i installed mines 5 days ago and got a 2mm air bubble on the right side of the home button i couldn't squeegee it out and doesn't seem to want to go away. has anyone else experienced this? is there anything i can do to get rid of it or will it eventually go away on its own? fortunately its not on the actual screen but its still an eyesore
i re applied my twice, wif no side effect, just dun touch the adhesive side, use industrial musking tape to lift it and for dust on under the screen, use scotch tape to remove it. key point is to never touch e adhesive side wif ur finger. nothing wrong wif this product, love it! its like the original screen, just tat if u really scratch it, u can remove it and there is the perfect screen below it.
btw for those tat claim it could b an production defects tat the glass is not perfectly straight, being in the glass industry for over 30 yrs, its actually easier and cheaper to create prefectly straight glass then any wif the slightest curve.
Sent from my GT-I9500 using xda premium
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
Same thing happened to me so I had to return it. The install came out perfect but the top left did not want to seal/adhere properly. I was so disappointed so I just went with the tried and true zagg. I purchased the protector from eBay so the return policy is different from their website.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
just tried lifting up that part of the screen for a few seconds and putting it back down. this air bubble is like a giant zit that wont go away
blackguy101 said:
I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
This is why I chose MIME. Email response is lightning quick and they include a hand written note in the package. Would definitely send you a new one without a question
Sent from my SGH-M919 using Tapatalk 2
The issue with it not laying after picking it up with your fingernail is not necessarily because the adhesive has gone bad. You need to level out the edge you stuck your nail under. Happened to me, fixed it with the squeege between the phone glass and the protector, prying up to level out the edge.
drbveb88 said:
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
So installed my tr, first try no bubbles.Seriously looks and feels like the samsung glass. AMAZING!!!
The steam trick works. Its not like its a sauna and your phone is a steamy. The steam is like a static electricity to dust.
Sent from my SCH-I535 using xda premium
With the S6 Edge, the clear view cover scratched many screen. Is this the same with the S6 edge+?
Sent from my SM-T815 using Tapatalk
Not really
Hello there
I've been using Clear View cover for about a month or so, and so farl not getting any signs of scratching the screen, however the case itself suffered more than a few scratches which is a pretty good fail since this case isn't really cheap. So answer is no, I'll be watching to see if it does.
Cheers
crash090 said:
Hello there
I've been using Clear View cover for about a month or so, and so farl not getting any signs of scratching the screen, however the case itself suffered more than a few scratches which is a pretty good fail since this case isn't really cheap. So answer is no, I'll be watching to see if it does.
Cheers
Click to expand...
Click to collapse
Maybe the case needs a screen protector. Hahaha!!!
boogiecornejo said:
Maybe the case needs a screen protector. Hahaha!!!
Click to expand...
Click to collapse
Yes Sir, Exactly, a 50$ case needs a case protector...
Clear View Case
crash090 said:
Hello there
I've been using Clear View cover for about a month or so, and so farl not getting any signs of scratching the screen, however the case itself suffered more than a few scratches which is a pretty good fail since this case isn't really cheap. So answer is no, I'll be watching to see if it does.
Cheers
Click to expand...
Click to collapse
Hi,
Using the clear view case for about a month now. Not a single scratch on the screen or the case.
Don't know about the clear case, but the s view cover is scratching the screen slightly. Had this issue with the official s view cover by samsung. Switched over to Rearth Fusion one.
No issues for me, have been using the S-View case for a few months now.
.
Sent from my Samsung Galaxy S6 Edge+ using Tapatalk
Does anyone know HOW it is scratching the screen? Is it a design flaw?
Sent from my SM-G928F using Tapatalk
poplectic said:
Does anyone know HOW it is scratching the screen? Is it a design flaw?
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
All I know is it put scratch all over the curve on my display, got the screen replaced free of charge now using a Spigen Case.
Not a scratch on my screen...had Clearview case since day 1
poplectic said:
Does anyone know HOW it is scratching the screen? Is it a design flaw?
Did you ever play with a balloon as a kid, rub it real fast, back and forth a bunch of times against your shirt or the carpet and then held it up on top of your head? If you did you'd notice that your hair suddenly is attracted to that balloon, as if it's a magnet. It's because rubbing it against your shirt or the carpet created static electricity and now your balloon full of negative charge. If you run it against anything with a positive charge it'll attract it, like a magnet.
Same idea with the cover, except that the balloon is the cover. The materials it's made of after awhile of opening and closing it begins to create a field of static charge, similar to the balloon and it starts to attract dust, sand, dirt, the tiny little particles inside your pockets or purse. Now all that crap on there built itself up along the inside of the cover and since your phones in your pocket, as you're walking around, its shuffling inside your pocket there...
And guess what happens when there's debris stuck inside that cover as you're just going about your day...?
Give up....?
You get scratches on your screen!
A speck of sand is tiny, most don't even realise it's there, yet it can cause some damage on a screen.
Basically the materials Samsung used to make that cover is rubber like, which is prone to building up static, so an expensive screen, tiny dirt particles and static prone materials are not a good mix.
Ways to avoid this?
1. Wash your jeans more often
2. Always have a clean/dirt or particle free purse
3. Avoid using the cover unless Samsung remakes it with static free materials.
I wonder if throwing a dryer sheet in your pocket works to eliminate static build up?
Hmm... well, if anything your phone and anything else down there should smell fresh and clean.
The cover looks really cool but not cool enough for me to risk my screen.
I'd feel pretty stupid to spend $60, with the intention to protect my phone with something that actually increases the potential to damage it.
Heard Samsung is aware of this and replaced screens free because of it, so maybe they reformulated the materials in it? Can't imagine they'd continue selling it, knowing they'd have to fix every screen that bought the cover. The cost to replace a screen is likely more than profit for the case, I'd think...?
Click to expand...
Click to collapse
Talysdaddy said:
poplectic said:
Does anyone know HOW it is scratching the screen? Is it a design flaw?
Did you ever play with a balloon as a kid, rub it real fast, back and forth a bunch of times against your shirt or the carpet and then held it up on top of your head? If you did you'd notice that your hair suddenly is attracted to that balloon, as if it's a magnet. It's because rubbing it against your shirt or the carpet created static electricity and now your balloon full of negative charge. If you run it against anything with a positive charge it'll attract it, like a magnet.
Same idea with the cover, except that the balloon is the cover. The materials it's made of after awhile of opening and closing it begins to create a field of static charge, similar to the balloon and it starts to attract dust, sand, dirt, the tiny little particles inside your pockets or purse. Now all that crap on there built itself up along the inside of the cover and since your phones in your pocket, as you're walking around, its shuffling inside your pocket there...
And guess what happens when there's debris stuck inside that cover as you're just going about your day...?
Give up....?
You get scratches on your screen!
A speck of sand is tiny, most don't even realise it's there, yet it can cause some damage on a screen.
Basically the materials Samsung used to make that cover is rubber like, which is prone to building up static, so an expensive screen, tiny dirt particles and static prone materials are not a good mix.
Ways to avoid this?
1. Wash your jeans more often
2. Always have a clean/dirt or particle free purse
3. Avoid using the cover unless Samsung remakes it with static free materials.
I wonder if throwing a dryer sheet in your pocket works to eliminate static build up?
Hmm... well, if anything your phone and anything else down there should smell fresh and clean.
The cover looks really cool but not cool enough for me to risk my screen.
I'd feel pretty stupid to spend $60, with the intention to protect my phone with something that actually increases the potential to damage it.
Heard Samsung is aware of this and replaced screens free because of it, so maybe they reformulated the materials in it? Can't imagine they'd continue selling it, knowing they'd have to fix every screen that bought the cover. The cost to replace a screen is likely more than profit for the case, I'd think...?
Click to expand...
Click to collapse
Wow yeah. That kind of material would be a magnet!
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
According to three local shops here in NL Samsung did a massive recall of the first series Clear View Covers and replaced them with a revised version that apparently solved the scratching.. The version I bought today definitely looks different from the first generation I had on my normal S6
Sent from my SM-G928F using Tapatalk