Database Info

[Q] Flashing update of CM9 nightly...

Hi Friends...
I have flashed "update-cm-9-20120226-NIGHTLY-crespo-signed.zip" from the official site of cyanogenmod and its works great. Now they have update on that. Could you please answer for my queries...
1.When I update to the new version, do I need to wipe data, cache....etc..?
2.Do I need to flash gapps again....?
3.When I flash the update, the applications installed will be wiped...?
Thanks

pafaisal said:
Hi Friends...
I have flashed "update-cm-9-20120226-NIGHTLY-crespo-signed.zip" from the official site of cyanogenmod and its works great. Now they have update on that. Could you please answer for my queries...
1.When I update to the new version, do I need to wipe data, cache....etc..?
2.Do I need to flash gapps again....?
3.When I flash the update, the applications installed will be wiped...?
Thanks
Click to expand...
Click to collapse
1. no
2. yes
3. no
4.

Thank you simms..... The fourth answer is too cute....

pafaisal said:
Hi Friends...
I have flashed "update-cm-9-20120226-NIGHTLY-crespo-signed.zip" from the official site of cyanogenmod and its works great. Now they have update on that. Could you please answer for my queries...
1.When I update to the new version, do I need to wipe data, cache....etc..?
2.Do I need to flash gapps again....?
3.When I flash the update, the applications installed will be wiped...?
Thanks
Click to expand...
Click to collapse
Hey, i was just wondering how you updated the cm9 latest nightly build update
Did you use is through Recovery?

A lot of Androids r similar as far as updating. If its just an update, usually u just need wipe cache and dalvik. If its a entirely different build then u will need to do a Clean Wipe. If after reboot u find no Gapps u can always just boot into recovery again and flash Gapps. Some guides will recommend doing a factory reset which will clear user data.

optimusv45 said:
A lot of Androids r similar as far as updating. If its just an update, usually u just need wipe cache and dalvik. If its a entirely different build then u will need to do a Clean Wipe. If after reboot u find no Gapps u can always just boot into recovery again and flash Gapps. Some guides will recommend doing a factory reset which will clear user data.
Click to expand...
Click to collapse
Thank you I tried that and it worked.

Ics cm9 alpha5

Hey guys!
I am.. new.
I have been here looking at the forums for about two months before deciding to register.. today.
I got a question.
This ICS ROM looks very interesting.. http://forum.xda-developers.com/showthread.php?t=1449649
I don't understand the installation steps..
I never flashed my phone before and i hope you understand.
So.. My phone is a Galaxy SL i9003
Baseband version: I9003JXKP3
Kernel Version: 2.6.35.7-CL982987
Build number: GINGERBREAD.JPKPH
Can anyone explain in detail the required steps to install the rom?
The phone isn't rooted.

Skander1998 said:
Hey guys!
I am.. new.
I have been here looking at the forums for about two months before deciding to register.. today.
I got a question.
This ICS ROM looks very interesting.. http://forum.xda-developers.com/showthread.php?t=1449649
I don't understand the installation steps..
I never flashed my phone before and i hope you understand.
So.. My phone is a Galaxy SL i9003
Baseband version: I9003JXKP3
Kernel Version: 2.6.35.7-CL982987
Build number: GINGERBREAD.JPKPH
Can anyone explain in detail the required steps to install the rom?
The phone isn't rooted.
Click to expand...
Click to collapse
you first use odin to flash cf root for JPKPH
then reboot and hold the power button,volume up and home buttom.
and go to CWM
and then wipe data ,cache and dalivk cache
and install rom from sd
choose the cm9
and wait installing
and reboot

http://www.theinfomania.com/2012/03...ustom-rom-on-to-your-samsung-galaxy-sl-i9003/
follow this till step 30....
then replace Poseidon with CM9alpha5 in the steps after step 30..
and after that
5. After the Recovery restarts, Wipe Data / Factory Reset.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot

loukalok said:
you first use odin to flash cf root for JPKPH
then reboot and hold the power button,volume up and home buttom.
and go to CWM
and then wipe data ,cache and dalivk cache
and install rom from sd
choose the cm9
and wait installing
and reboot
Click to expand...
Click to collapse
Will this do the trick for CF-ROOT? forum.xda-developers.com/showthread.php?t=1351056

welcome,I hope you're enjoying your staying here.

john9 said:
welcome,I hope you're enjoying your staying here.
Click to expand...
Click to collapse
Thanks
loukalok said:
you first use odin to flash cf root for JPKPH
then reboot and hold the power button,volume up and home buttom.
and go to CWM
and then wipe data ,cache and dalivk cache
and install rom from sd
choose the cm9
and wait installing
and reboot
Click to expand...
Click to collapse
Will this do the trick for CF-ROOT? http://forum.xda-developers.com/showthread.php?t=1351056

Skander1998 said:
Thanks
Will this do the trick for CF-ROOT? http://forum.xda-developers.com/showthread.php?t=1351056
Click to expand...
Click to collapse
yes, this is universal CF-ROOT, which can flash on all version of GB FW.
the addon is for the EXT4 conversion, which convert partition format.
this is to boost up you phone perfomance.
which you have to learn that, after you have know more on flashing
btw, after flash cm9, you already on ext4

What is the point of making wipe?? I didn't do it when I installed it. Shall I reflash the CM9 ROM or keep it like this???
Also another thing. Why I cannot overclock my phone?? When I had the stock rom I could overclock to 1.2Ghz with SetCPU, but now I can't.
Please help me.
Thank you.

juanfpo96 said:
What is the point of making wipe?? I didn't do it when I installed it. Shall I reflash the CM9 ROM or keep it like this???
Also another thing. Why I cannot overclock my phone?? When I had the stock rom I could overclock to 1.2Ghz with SetCPU, but now I can't.
Please help me.
Thank you.
Click to expand...
Click to collapse
wipe is to make sure phone reload the new rom.
CM9 kernel did not provide over clock

There is a discussion and q&a thread for cm9.
http://forum.xda-developers.com/showthread.php?t=1563920

kamilien said:
There is a discussion and q&a thread for cm9.
http://forum.xda-developers.com/showthread.php?t=1563920
Click to expand...
Click to collapse
Thank you, the thread was spammed alot and didn't know if i am supposed to ask such a simple question there.
Sorry for making a new topic.

You don't have to be sorry, It was just a reminding. Welcome.

G3MOD Kernel for JB/ICS

Hi,
I have taken the code of G3MOD code and modded it for JB.
Also I have included the Bluetooth fix that I have done for ICS. Yeah the same fix is also available in JB.
Use this kernel with ICS & JB as the bluetooth fix is applied only to these two versions.
Try it out and let me know the comments.
Download Here
Thanks to all G3 developers.
Special Thanks to g3mod team, marcellusbe, hillbeast, cdesai.
If I forget to thank anyone it's not intended, PM me. I will thank you.
Note: I am not responsible for any damage caused to your phone (softbrick or hardbrick).

Thanks mate , Hope to see more development from your side as well ...to make G3 the best ever phone

Can you make a .tar version please? I can't flash it through CWM.... I flashed JB then without rebooting flashed this but it still didn't work... Same with gapps, they don't install for me...

I also can't flash this kernel either as it still says im on [email protected] #cm7_kernel_oc_1.8

Are we able to access CWM then?

Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english

BeriCud said:
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
Click to expand...
Click to collapse
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????

ilievski.ace said:
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
Click to expand...
Click to collapse
When you install the ROM you should wipe the data as well but when installing the kernel you should wipe cache and dalvik cache.
Click thanks if I helped.

Thank you very much....
A small query....
If I install the kernel immediately after applying JB update then will I be able to access cwm the next time??
Thanks

kernel "bluetooth???"
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?

I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
zsolt64 said:
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
Click to expand...
Click to collapse

pmanian said:
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
Click to expand...
Click to collapse
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp

@pmanian
Can you make UMS working on ICS/JB with g3mod kernel?

To all who managed to get it working: Do data2sd and CWM work? These are the key features I'm missing right now

Thanks a lot!!
Sent from my GT-I5801 using xda app-developers app

you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.

pathfinderhd said:
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
Click to expand...
Click to collapse
Search the JB thread in the development section. He released a build but it is old and has quite a few bugs in it which he has fixed.

I reflashed JB, then g3mod, wiped data, cache and dalvik cache. Neither CWM nor data2sd are working, but the bootscreen changed, and I don't get stuck. Can anyone help me?

ilievski.ace said:
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
Click to expand...
Click to collapse
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks

ilievski.ace said:
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
Click to expand...
Click to collapse
take any tar of any rom.......remove all the files in it and place the zImage file in the provided zip into the tar file.(With the help of TOTAL COMMANDER)
process:
Install the ROM through CWM...
then go to download mode and then flash the kernel through ODIN
reboot in to recovery and clear cache & dalvik-Cache.
reboot & enjoy.

[Q] Froyo to CM7 or Gingerbread update first?

I need to upgrade a device running stock froyo(yeah!!)
Do I need to update to any gingerbread rom first before flashing CM7/9/10 as the file format is different or can it be done directly?
P.S. I do not own the device so have little knowledge about this, did try to search first but excuse me if this has been answered before(link please?)

noobwithgalaxyy said:
I need to upgrade a device running stock froyo(yeah!!)
Do I need to update to any gingerbread rom first before flashing CM7/9/10 as the file format is different or can it be done directly?
P.S. I do not own the device so have little knowledge about this, did try to search first but excuse me if this has been answered before(link please?)
Click to expand...
Click to collapse
hello dude.. you should first update to android 2.3.4 or android 2.3.6 (gingerbread) and then use it for 1 or 2 hours and let rom settle down..
then install CWM v5 and then download ur cm rom 7/9/10 or whichever you want and flash it..
do these steps to get better performance..
flash gingerbread via odin multiloader..
press thanks if it helped you..

dont forget if its is your first time to cm always format system or else you will get a boot loop

Rishabhj.official said:
hello dude.. you should first update to android 2.3.4 or android 2.3.6 (gingerbread) and then use it for 1 or 2 hours and let rom settle down..
then install CWM v5 and then download ur cm rom 7/9/10 or whichever you want and flash it..
do these steps to get better performance..
flash gingerbread via odin multiloader..
press thanks if it helped you..
Click to expand...
Click to collapse
also wipe data reset and chache partition and then go to advanced and wide dalvik chache and then battery stats..
then go back to mount and storage and there format system/ data / and chache..
and then wide data reset and chahe again and then flash rom
and then after installing rom wide data reset and chache angain and reboot system now..
its all..
best of luck BOF....

Few questions...

I've few questions:
1. When I change custom roms, I should do Full KPE everytime? For example, if i've install CarbonRom1.7 and after that I want to install ThinkingBridge ROM. I should just format everything or I need to do Full KPE ?
2. All roms have problems with Wifi? I've tried X-Gamerz, CarbonRom1.7 and ThinkingBridge ROM and I need to close and open the wifi for few times to connect. On stock rom, it work very well.
3. I tried to install Real Football 2013 from market and when it starting is remain stucked at Gameloft logo. Why?
4. If I install a rom based on 4.2.2 A2, when I should install first CM10 A4 or CM10.1 A2 ?
I'm sorry for my bad english and for these questions, but I don't understand some things.

1. Changing customs rom, go into reboot recovery and do a wipe then flash the rom you want
2. Yeah most roms have that problem but you get use to it im just using x-gamerz rom
3. Im not sure why isnt it working, i think theres a thread that says what games work on our device look for it.
4. Hmm not sure what you mean but if you are install a rom 4.2.2 you will need to install cm10.1 4.2.2 for the rom to work
Sent from my GT-I9003 using xda app-developers app

RazvanFCBM said:
I've few questions:
1. When I change custom roms, I should do Full KPE everytime? For example, if i've install CarbonRom1.7 and after that I want to install ThinkingBridge ROM. I should just format everything or I need to do Full KPE ?
Click to expand...
Click to collapse
No, if they share the same rom base (like qwerty & gamerz). In that case, just wipe cache, dalvik, install the new rom, install gapps, and you're good to go.