Database Info

[Q] Help with Angeeks_SamI9103´s ROM!

Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.

Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
wipe cacche dalvik cache , factory reset
flash the ROM again
again wipe all...:good::fingers-crossed:
try it

Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
You shld ask this in dev section under angeeks ROM thread

vipul12389mehta said:
You shld ask this in dev section under angeeks ROM thread
Click to expand...
Click to collapse
Hey buddy, he is not able to post in Dev section due to NewBie.

Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
Hey have u flashed the rom on some other kernal if yes den try flashing the nordic firmware(XXLQ9) n den flash the rom
Hit thanks if i helped you

hasanjaved said:
wipe cacche dalvik cache , factory reset
flash the ROM again
again wipe all...:good::fingers-crossed:
try it
Click to expand...
Click to collapse
I have done than before and after flashing the ROM, but will give it another try
Thanks

Kartik pat said:
Hey have u flashed the rom on some other kernal if yes den try flashing the nordic firmware(XXLQ9) n den flash the rom
Hit thanks if i helped you
Click to expand...
Click to collapse
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there

Badboy800 said:
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Click to expand...
Click to collapse
Can you please explain the steps in detail which you have followed, so that i can try to help...

Badboy800 said:
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Click to expand...
Click to collapse
Ill tell u my steps what i did:
First i reverted back to gb using cwm backup den i did a factory reset n wiped cache.. Den i flashed the stock nordic firmware n den flashed the rom n before rebooting the device i wiped cache n delvik cache.. And it worked for me try dis if i want to
Hit thanks if i helped you

mj.vikram said:
Can you please explain the steps in detail which you have followed, so that i can try to help...
Click to expand...
Click to collapse
Okey, i came from Blueberry ROM 1.0 and here is the steps i followed:
1: Flashed the Nordic I9103XXLQ9 ROM USIN Odin v3.07
2. Booted up once to the rom to check if its had installed correctly
3. Flashed CMW 4.0.0.1 with Odin
4. Done a factory reset, wiped cache and dalvik cache
5. Flashed the Rom and after the process was complete from CMW, i restarted the phone but got stock on the Galaxy R splash screen and the phone restarted back to CMW.
6. Tried to wipe cache and dalvic cache again but still the phone wont boot up.
its so weird!

Kartik pat said:
Ill tell u my steps what i did:
First i reverted back to gb using cwm backup den i did a factory reset n wiped cache.. Den i flashed the stock nordic firmware n den flashed the rom n before rebooting the device i wiped cache n delvik cache.. And it worked for me try dis if i want to
Hit thanks if i helped you
Click to expand...
Click to collapse
Yes that may work, i will try it today.
Thanks buddy

Badboy800 said:
Okey, i came from Blueberry ROM 1.0 and here is the steps i followed:
1: Flashed the Nordic I9103XXLQ9 ROM USIN Odin v3.07
2. Booted up once to the rom to check if its had installed correctly
3. Flashed CMW 4.0.0.1 with Odin
4. Done a factory reset, wiped cache and dalvik cache
5. Flashed the Rom and after the process was complete from CMW, i restarted the phone but got stock on the Galaxy R splash screen and the phone restarted back to CMW.
6. Tried to wipe cache and dalvic cache again but still the phone wont boot up.
its so weird!
Click to expand...
Click to collapse
Are you selecting Install zip file/update from Zip option in CWM, Sorry for asking the silly Question because i just want to confirm it...

mj.vikram said:
Are you selecting Install zip file/update from Zip option in CWM, Sorry for asking the silly Question because i just want to confirm it...
Click to expand...
Click to collapse
Its okey Yess i do. I manage to flash it from both cmw versions so i dont think the problem is there. Should i go back to GB and then try the process?

Badboy800 said:
Its okey Yess i do. I manage to flash it from both cmw versions so i dont think the problem is there. Should i go back to GB and then try the process?
Click to expand...
Click to collapse
First, u are coming from deodexed Rom.
Do one thing.. just install ur backup(if u took that one). Then install xxql9 using odin v 3.07(do run as administrator) & Then let it boot. Switch off the mobile and After that install CMW v4 & Then let it boot again. Again switch off ur mobile. Go to recovery install MOD rom. Dont wipe anything. It will do it by itself. Boot again. Let feel happy..
Sent from my GT-I9103 using xda premium

How to install this rom on stock GB?
I am currently on stock GB (Indian vesion). Can I directly flash this rom via CWM 4?? The Q&A in rom's post says there is no need to flash XXLQ9 first, but everyone is suggesting to flash that first?

vivekmaru said:
I am currently on stock GB (Indian vesion). Can I directly flash this rom via CWM 4?? The Q&A in rom's post says there is no need to flash XXLQ9 first, but everyone is suggesting to flash that first?
Click to expand...
Click to collapse
Yaa it will be better if you flash XXLQ9 first and then the rom so that u can enjoy all the features!!
Hit Thanks If I Helped You

Kartik pat said:
Yaa it will be better if you flash XXLQ9 first and then the rom so that u can enjoy all the features!!
Hit Thanks If I Helped You
Click to expand...
Click to collapse
Well.. I already flashed the Angeek's ROM via CMW before you replied and the ROM seem to work fine. Any idea on what features I may be missing on?

[Q] Froyo to CM7 or Gingerbread update first?

I need to upgrade a device running stock froyo(yeah!!)
Do I need to update to any gingerbread rom first before flashing CM7/9/10 as the file format is different or can it be done directly?
P.S. I do not own the device so have little knowledge about this, did try to search first but excuse me if this has been answered before(link please?)

noobwithgalaxyy said:
I need to upgrade a device running stock froyo(yeah!!)
Do I need to update to any gingerbread rom first before flashing CM7/9/10 as the file format is different or can it be done directly?
P.S. I do not own the device so have little knowledge about this, did try to search first but excuse me if this has been answered before(link please?)
Click to expand...
Click to collapse
hello dude.. you should first update to android 2.3.4 or android 2.3.6 (gingerbread) and then use it for 1 or 2 hours and let rom settle down..
then install CWM v5 and then download ur cm rom 7/9/10 or whichever you want and flash it..
do these steps to get better performance..
flash gingerbread via odin multiloader..
press thanks if it helped you..

dont forget if its is your first time to cm always format system or else you will get a boot loop

Rishabhj.official said:
hello dude.. you should first update to android 2.3.4 or android 2.3.6 (gingerbread) and then use it for 1 or 2 hours and let rom settle down..
then install CWM v5 and then download ur cm rom 7/9/10 or whichever you want and flash it..
do these steps to get better performance..
flash gingerbread via odin multiloader..
press thanks if it helped you..
Click to expand...
Click to collapse
also wipe data reset and chache partition and then go to advanced and wide dalvik chache and then battery stats..
then go back to mount and storage and there format system/ data / and chache..
and then wide data reset and chahe again and then flash rom
and then after installing rom wide data reset and chache angain and reboot system now..
its all..
best of luck BOF....

(Q) jellybam 1.3 won't flash

Hi guys. Al thou this is my first post I've been flashing my i9003 for a year or so and i've never had any problems until now.
I have an stock gingerbread installed (XXKPQ) that I flashed using odin, kernel version (2.6.35.7-CL709629 [email protected] #1)
Just so you know, I'm from Argentina, and in order to be able to use 3g, had to keep the modem in I9003LUBKB1 version.
I also flashed cf root (by Skin1980) and I'm using CWM v1.80
I get the latest jellybam (1.3) from this post: http://forum.xda-developers.com/showthread.php?t=1972087
And followed the instructions in the official website : http://www.igio90.net/how-to-install/
Just in case you're too lazy to follow the link here are the instructions:
What to do if you are coming from a Stock, CyanogenMod, MIUI, AOKP and any other custom ROM different from JellyBam
-Download the latest revision of JellyBam ROM for your device
-Place the zip into your internal SDCard
-Boot into CWM recovery (Home+Power+Volume up until samsung logo appear)
-Wipe data/factory reset
-Wipe dalvik cache (Inside advanced tab)
-Install zip from internal SDCard
-Welcome to JellyBam!
(I had to wipe the data first and then put the zip in the sd card because wiping the data was erasing the jellybam zip)
The first time I run the installer it got stuck at 50% while installing sony's media player. So i just started the process again and uncheked sony walkman player, it installed "successfully".
When the phone restarted, it was just the old gingerbread, in the about phone panel, it was all the same that before installing jellybam.
So it obviously didn't installed. I can make calls, send and receive messages, wifi is working fine.
So can anyone tell me what am I doing wrong? Do i have to flash a jellybean kernel?, I dont really know hoe to do that but I'm sure there's more than one post around here that explains that process.
If this question has already been posted I'm really sorry, I did search for any post that could help me with this problem but I didn't find any real answer.
I really hope somebody can help me, and sorry for the bad english, I did study the language but it was a long time ago.
Thanks everybody, specially to developers, you're awesome.:good:

I think you should fist flash theJellyBam v1.1.0 alpha4 in order to repartition before flash the v1.3. hope it can help u.
Sent from my GT-I9003 using xda app-developers app

friend, 1st thing, you need to flash newer cwm to minimum your problem. now is version 6 on CM10 rom.
2nd flash CM rom or AOSP to use jelly bam
Sent from my Galaxy Nexus using Tapatalk 2

flashing 1.1 first worked great.
I'm having issues thou, don't know if this are known bugs or just happens to me.
I can't get any signal, gonna try flashing this:
http://forum.xda-developers.com/showthread.php?t=2029921&highlight=cm10+signal+fix
And seems like the phone can't detect when it's plugged to a usb port

narshade said:
(I had to wipe the data first and then put the zip in the sd card because wiping the data was erasing the jellybam zip)
Click to expand...
Click to collapse
Wiping the data does not affect your Internal/External storage.

chongns said:
friend, 1st thing, you need to flash newer cwm to minimum your problem. now is version 6 on CM10 rom.
2nd flash CM rom or AOSP to use jelly bam
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
First of all thank you for your helpful answer (I clicked the thank you button).
I have cwm version 5 and I have been having the same problem than the OP. I'd like to flash a CM rom before going on to JB 1.3 so my question is, knowing that I currently have an I9003XXKPR 2.3.6 rom, can I flash CM 10 or should I start by a previous version? And, if so, which one?
Thank you for your help.

jawadlotfi said:
First of all thank you for your helpful answer (I clicked the thank you button).
I have cwm version 5 and I have been having the same problem than the OP. I'd like to flash a CM rom before going on to JB 1.3 so my question is, knowing that I currently have an I9003XXKPR 2.3.6 rom, can I flash CM 10 or should I start by a previous version? And, if so, which one?
Thank you for your help.
Click to expand...
Click to collapse
i think you should start from zero. take a backup of your files, flash a stock rom and then use universal cf root to root your phone. then flash cm 10 alpha 4 and then the jellybam 1.3. that's the way i have flashed mine. i hope it helps.

imboy25 said:
i think you should start from zero. take a backup of your files, flash a stock rom and then use universal cf root to root your phone. then flash cm 10 alpha 4 and then the jellybam 1.3. that's the way i have flashed mine. i hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, I flashed a stock rom in the meantime so I am ready to flash CM 10 alpha 4.
Take care

jawadlotfi said:
Thanks for the advice, I flashed a stock rom in the meantime so I am ready to flash CM 10 alpha 4.
Take care
Click to expand...
Click to collapse
Good luck! i hope you flash it correctly! just read and follow the instructions in the cm10 thread thoroughly so you can avoid any problems.

All custom rom unofficial, not compile, but directly modify our base cyanogen
It is recommended to start on a CM10 origin
Example A3 to A4
KPE> LF2> CF-LF2
Wipe Data / Factory Reset. (MUST DO THIS STEP)
Select the CM10 A4.zip from your SD Card and flash.
Auto rebooted into recovery (if it show error mounting / cache, and cant mount in manually mount and storage, do wipe / cache)
Go to Advanced -> Reboot Recovery
Select the CM10 A4.zip from your SD Card and flash again
Go to Advanced -> Reboot Recovery.
Mounts and Storage -> Format dbdata (you would not find this in CWM so just ignor 6)
8. reboot
You can then flash all based on Unofficial Alpha 4
Just do the basic procedure wipe

[Q] Question about updating roms.

This a general question about apdating custom roms...
In cwm there is an option 'Update from sd' or something like that... What does it do?
Plus, If i have a rom installed into my phone, like for example a Version 1 of the rom. Do I have to wipe everything before installing version 1.1 or can I just flash it unto the other rom without wiping everything?Do I have to wipe only when a version 2 of the rom comes out? Ask the developer? EX. Real ics 5 to 5.1, to 5.2....
I have the same question for FXP cyanogen mod. If I have FXP149, Do I have to wipe everything before installing FXP150?
THANK YOU!

Yunzip said:
This a general question about apdating custom roms...
In cwm there is an option 'Update from sd' or something like that... What does it do?
Plus, If i have a rom installed into my phone, like for example a Version 1 of the rom. Do I have to wipe everything before installing version 1.1 or can I just flash it unto the other rom without wiping everything? Do I have to wipe only when a version 2 of the rom comes out? Ask the developer?
I have the same question for FXP cyanogen mod. If I have FXP149, Do I have to wipe everything before installing FXP150?
THANK YOU!
Click to expand...
Click to collapse
please be more precise about the versions you mentioned

Yunzip said:
This a general question about apdating custom roms...
In cwm there is an option 'Update from sd' or something like that... What does it do?
Click to expand...
Click to collapse
What it says. CWM is self explanatory.
Yunzip said:
Plus, If i have a rom installed into my phone, like for example a Version 1 of the rom. Do I have to wipe everything before installing version 1.1 or can I just flash it unto the other rom without wiping everything?
Click to expand...
Click to collapse
Depends what the instructions in the ROM/Kernel/Theme/ thread says.

Yunzip said:
This a general question about apdating custom roms...
In cwm there is an option 'Update from sd' or something like that... What does it do?
Plus, If i have a rom installed into my phone, like for example a Version 1 of the rom. Do I have to wipe everything before installing version 1.1 or can I just flash it unto the other rom without wiping everything?Do I have to wipe only when a version 2 of the rom comes out? Ask the developer? EX. Real ics 5 to 5.1, to 5.2....
I have the same question for FXP cyanogen mod. If I have FXP149, Do I have to wipe everything before installing FXP150?
THANK YOU!
Click to expand...
Click to collapse
Use the "install from sd card" and choose the updated file for your custom rom then install after install just wipe cache & dalvik cache then reboot

[Q] No ROMS are working

I have CWM 5.0.2.7. I want to upgrade from 2.3.6 Gingerbread to Android 4(PACMAN ROM preferred). I tried at least 50 - 75 times flashing >5 different ROMS, almost once bricked my phone... I found stable Gingerbread 2.3.6 and I am using it right now. I really want to upgrade to version 4, because I develop apps in Buzztouch and they will now support Android devices with Honeycomb or later. My question now is: how can I really upgrade to Android 4, because every ROM I flash is stuck at the first boot. Any help?

There is absolutely zero possibility of bricking your phone in flashing custom ROMs unless you do it in a wrong way (flashing other phone's ROM ). Same thing goes for bootloop. Wipe data,cache, dalvik cache and even format /system before flashing and also do wipes after flash. This way u can view a new dimension to the android world

swat4samp said:
There is absolutely zero possibility of bricking your phone in flashing custom ROMs unless you do it in a wrong way (flashing other phone's ROM ). Same thing goes for bootloop. Wipe data,cache, dalvik cache and even format /system before flashing and also do wipes after flash. This way u can view a new dimension to the android world
Click to expand...
Click to collapse
I already knew everything you said, even more, but thanks for idea of formatting /system. Maybe that is the main problem. Thank you so much!

UPDATE! Nothing is working. I think I will give up on ROMing.

Lol which baseband are u on? Try to flash latest stock rom ie DXKT7 and then flash a custom rom.

swat4samp said:
Lol which baseband are u on? Try to flash latest stock rom ie DXKT7 and then flash a custom rom.
Click to expand...
Click to collapse
I cannot find any with DXKT7 baseband. I am on XWKTI.

I got the same problem. Flashing from stock 2.3.6 XWKTI to any other cm 10.1 rom is not working. Clearing caches etc. does not help.
Any solution to this?
The latest rom I tried is cm-10.1-20130907-NIGHTLY-beni.zip. No luck so far.
What is wrong here?

Solved. I used the wrong CWM. beni_cwm-5_ext4_v2.tar does the trick.

Junnix said:
Solved. I used the wrong CWM. beni_cwm-5_ext4_v2.tar does the trick.
Click to expand...
Click to collapse
How did you solve the problem?

AleksaSavic said:
How did you solve the problem?
Click to expand...
Click to collapse
Did u ever successfully used ny custom rom b4.. or is this ur 1st chance...??

AleksaSavic said:
How did you solve the problem?
Click to expand...
Click to collapse
The CWM you use might be a one which is not working. At least I used a CWM 5.0.2.7. But it was rfs which is not compatible with the S5670.
So install CWM beni_cwm-5_ext4_v2.tar and you will be able to install any custom rom without problem.

Junnix said:
The CWM you use might be a one which is not working. At least I used a CWM 5.0.2.7. But it was rfs which is not compatible with the S5670.
So install CWM beni_cwm-5_ext4_v2.tar and you will be able to install any custom rom without problem.
Click to expand...
Click to collapse
It is this:
http://forum.xda-developers.com/showthread.php?t=1339640

BRO F U WANT TO UPDATE TO 4.+ THEN FOLLOW THESE STEPS
BOOT TO RECOVERY
WIPE DATA
WIPE CACHE
ADVANCE>>WIPE DALVIK CACHE
MOUNTS AND STORAGE>>FORMAT SYSTEM
INSTALL THE ROM U WANT
WIPE DATA
WIPE CACHE
REBOOT
WAIT FOR 5-10 MINS AS IT TAKS TIME FOR FIRST BOOT
STILL NOT HAPPENING
THEN UR DOWNLOADED FILE MUST BE CORRUPTED SO DOWNLOAD THE FILE AGAIN

Galaxy_Rohit said:
Did u ever successfully used ny custom rom b4.. or is this ur 1st chance...??
Click to expand...
Click to collapse
Flashed custom ROMs at least 75 times. I am not a newbie.

Junnix said:
The CWM you use might be a one which is not working. At least I used a CWM 5.0.2.7. But it was rfs which is not compatible with the S5670.
So install CWM beni_cwm-5_ext4_v2.tar and you will be able to install any custom rom without problem.
Click to expand...
Click to collapse
I already have CWM 5.0.2.7. Can I install it again via Odin or not?

ZmisiS said:
It is this:
http://forum.xda-developers.com/showthread.php?t=1339640
Click to expand...
Click to collapse
I flashed that already(I think).

vinayaksuresh said:
BRO F U WANT TO UPDATE TO 4.+ THEN FOLLOW THESE STEPS
BOOT TO RECOVERY
WIPE DATA
WIPE CACHE
ADVANCE>>WIPE DALVIK CACHE
MOUNTS AND STORAGE>>FORMAT SYSTEM
INSTALL THE ROM U WANT
WIPE DATA
WIPE CACHE
REBOOT
WAIT FOR 5-10 MINS AS IT TAKS TIME FOR FIRST BOOT
STILL NOT HAPPENING
THEN UR DOWNLOADED FILE MUST BE CORRUPTED SO DOWNLOAD THE FILE AGAIN
Click to expand...
Click to collapse
/system - ext4
/data - rfs
/cache - rfs
/db-data - unknown
I am using this apk:
CF-Root-ext4-v1.3-Addon.apk from Chainfire, but it is not made for my phone.
It has options for converting ext4 to rfs and rfs to ext4, but I am scared to do that. How can I manually convert from rfs to ext4? And, will my system even boot after doing that?

Possible solution...
Hi,
I have successfully flashed cm-10.1-20130914-NIGHTLY-beni.zip using ClockWorkMod 6.0.2.7. I initially had problems getting cm 10.1 to boot, it would just stop at the cyanogenmod logo. I got this ROM to work by first flashing ╰☆╮ [ROM][CM7.2] JellyBread v5.0 | SURPRISE! UPLOAD COMPLETE! ╰☆╮. then flashing the nightly.
Good luck:fingers-crossed:.
Regards,
jemail

I wouldn't recommend installing ICS on a Galaxy Fit. The phone doesn't really stand that much of the ROM itself.. I use a rom that'll look exactly alike it, that's basically it. But I tried Lenio vQuattro. it seemed pretty nice If you really need to then try this rom. And it wouldn't be such a bad idea tp update CWM, or try another Recovery.

AleksaSavic said:
/system - ext4
/data - rfs
/cache - rfs
/db-data - unknown
I am using this apk:
CF-Root-ext4-v1.3-Addon.apk from Chainfire, but it is not made for my phone.
It has options for converting ext4 to rfs and rfs to ext4, but I am scared to do that. How can I manually convert from rfs to ext4? And, will my system even boot after doing that?
Click to expand...
Click to collapse
Good question.
I really got no answere to that question. But as far as I know there are CMW for rfs and for ext4/ext3 filesystems.
If you use the wrong CMW than the phone will hang in a boot loop after flashing. That's what I had.
So I suggest you should try different CMW. For rfs and ext4. Better to flash them with Odin. I used Odin_Multi_Downloader_v4.42.exe.
As CWM try: http://forum.xda-developers.com/showpost.php?p=24719114&postcount=1387 or this CWM http://androidlegend.com/dl/beni_cwm-5_ext4_v2.tar
One of these should work for you.