Database Info

(Q) jellybam 1.3 won't flash

Hi guys. Al thou this is my first post I've been flashing my i9003 for a year or so and i've never had any problems until now.
I have an stock gingerbread installed (XXKPQ) that I flashed using odin, kernel version (2.6.35.7-CL709629 [email protected] #1)
Just so you know, I'm from Argentina, and in order to be able to use 3g, had to keep the modem in I9003LUBKB1 version.
I also flashed cf root (by Skin1980) and I'm using CWM v1.80
I get the latest jellybam (1.3) from this post: http://forum.xda-developers.com/showthread.php?t=1972087
And followed the instructions in the official website : http://www.igio90.net/how-to-install/
Just in case you're too lazy to follow the link here are the instructions:
What to do if you are coming from a Stock, CyanogenMod, MIUI, AOKP and any other custom ROM different from JellyBam
-Download the latest revision of JellyBam ROM for your device
-Place the zip into your internal SDCard
-Boot into CWM recovery (Home+Power+Volume up until samsung logo appear)
-Wipe data/factory reset
-Wipe dalvik cache (Inside advanced tab)
-Install zip from internal SDCard
-Welcome to JellyBam!
(I had to wipe the data first and then put the zip in the sd card because wiping the data was erasing the jellybam zip)
The first time I run the installer it got stuck at 50% while installing sony's media player. So i just started the process again and uncheked sony walkman player, it installed "successfully".
When the phone restarted, it was just the old gingerbread, in the about phone panel, it was all the same that before installing jellybam.
So it obviously didn't installed. I can make calls, send and receive messages, wifi is working fine.
So can anyone tell me what am I doing wrong? Do i have to flash a jellybean kernel?, I dont really know hoe to do that but I'm sure there's more than one post around here that explains that process.
If this question has already been posted I'm really sorry, I did search for any post that could help me with this problem but I didn't find any real answer.
I really hope somebody can help me, and sorry for the bad english, I did study the language but it was a long time ago.
Thanks everybody, specially to developers, you're awesome.:good:

I think you should fist flash theJellyBam v1.1.0 alpha4 in order to repartition before flash the v1.3. hope it can help u.
Sent from my GT-I9003 using xda app-developers app

friend, 1st thing, you need to flash newer cwm to minimum your problem. now is version 6 on CM10 rom.
2nd flash CM rom or AOSP to use jelly bam
Sent from my Galaxy Nexus using Tapatalk 2

flashing 1.1 first worked great.
I'm having issues thou, don't know if this are known bugs or just happens to me.
I can't get any signal, gonna try flashing this:
http://forum.xda-developers.com/showthread.php?t=2029921&highlight=cm10+signal+fix
And seems like the phone can't detect when it's plugged to a usb port

narshade said:
(I had to wipe the data first and then put the zip in the sd card because wiping the data was erasing the jellybam zip)
Click to expand...
Click to collapse
Wiping the data does not affect your Internal/External storage.

chongns said:
friend, 1st thing, you need to flash newer cwm to minimum your problem. now is version 6 on CM10 rom.
2nd flash CM rom or AOSP to use jelly bam
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
First of all thank you for your helpful answer (I clicked the thank you button).
I have cwm version 5 and I have been having the same problem than the OP. I'd like to flash a CM rom before going on to JB 1.3 so my question is, knowing that I currently have an I9003XXKPR 2.3.6 rom, can I flash CM 10 or should I start by a previous version? And, if so, which one?
Thank you for your help.

jawadlotfi said:
First of all thank you for your helpful answer (I clicked the thank you button).
I have cwm version 5 and I have been having the same problem than the OP. I'd like to flash a CM rom before going on to JB 1.3 so my question is, knowing that I currently have an I9003XXKPR 2.3.6 rom, can I flash CM 10 or should I start by a previous version? And, if so, which one?
Thank you for your help.
Click to expand...
Click to collapse
i think you should start from zero. take a backup of your files, flash a stock rom and then use universal cf root to root your phone. then flash cm 10 alpha 4 and then the jellybam 1.3. that's the way i have flashed mine. i hope it helps.

imboy25 said:
i think you should start from zero. take a backup of your files, flash a stock rom and then use universal cf root to root your phone. then flash cm 10 alpha 4 and then the jellybam 1.3. that's the way i have flashed mine. i hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, I flashed a stock rom in the meantime so I am ready to flash CM 10 alpha 4.
Take care

jawadlotfi said:
Thanks for the advice, I flashed a stock rom in the meantime so I am ready to flash CM 10 alpha 4.
Take care
Click to expand...
Click to collapse
Good luck! i hope you flash it correctly! just read and follow the instructions in the cm10 thread thoroughly so you can avoid any problems.

All custom rom unofficial, not compile, but directly modify our base cyanogen
It is recommended to start on a CM10 origin
Example A3 to A4
KPE> LF2> CF-LF2
Wipe Data / Factory Reset. (MUST DO THIS STEP)
Select the CM10 A4.zip from your SD Card and flash.
Auto rebooted into recovery (if it show error mounting / cache, and cant mount in manually mount and storage, do wipe / cache)
Go to Advanced -> Reboot Recovery
Select the CM10 A4.zip from your SD Card and flash again
Go to Advanced -> Reboot Recovery.
Mounts and Storage -> Format dbdata (you would not find this in CWM so just ignor 6)
8. reboot
You can then flash all based on Unofficial Alpha 4
Just do the basic procedure wipe

[Q] Question about updating roms.

This a general question about apdating custom roms...
In cwm there is an option 'Update from sd' or something like that... What does it do?
Plus, If i have a rom installed into my phone, like for example a Version 1 of the rom. Do I have to wipe everything before installing version 1.1 or can I just flash it unto the other rom without wiping everything?Do I have to wipe only when a version 2 of the rom comes out? Ask the developer? EX. Real ics 5 to 5.1, to 5.2....
I have the same question for FXP cyanogen mod. If I have FXP149, Do I have to wipe everything before installing FXP150?
THANK YOU!

Yunzip said:
This a general question about apdating custom roms...
In cwm there is an option 'Update from sd' or something like that... What does it do?
Plus, If i have a rom installed into my phone, like for example a Version 1 of the rom. Do I have to wipe everything before installing version 1.1 or can I just flash it unto the other rom without wiping everything? Do I have to wipe only when a version 2 of the rom comes out? Ask the developer?
I have the same question for FXP cyanogen mod. If I have FXP149, Do I have to wipe everything before installing FXP150?
THANK YOU!
Click to expand...
Click to collapse
please be more precise about the versions you mentioned

Yunzip said:
This a general question about apdating custom roms...
In cwm there is an option 'Update from sd' or something like that... What does it do?
Click to expand...
Click to collapse
What it says. CWM is self explanatory.
Yunzip said:
Plus, If i have a rom installed into my phone, like for example a Version 1 of the rom. Do I have to wipe everything before installing version 1.1 or can I just flash it unto the other rom without wiping everything?
Click to expand...
Click to collapse
Depends what the instructions in the ROM/Kernel/Theme/ thread says.

Yunzip said:
This a general question about apdating custom roms...
In cwm there is an option 'Update from sd' or something like that... What does it do?
Plus, If i have a rom installed into my phone, like for example a Version 1 of the rom. Do I have to wipe everything before installing version 1.1 or can I just flash it unto the other rom without wiping everything?Do I have to wipe only when a version 2 of the rom comes out? Ask the developer? EX. Real ics 5 to 5.1, to 5.2....
I have the same question for FXP cyanogen mod. If I have FXP149, Do I have to wipe everything before installing FXP150?
THANK YOU!
Click to expand...
Click to collapse
Use the "install from sd card" and choose the updated file for your custom rom then install after install just wipe cache & dalvik cache then reboot

[Q] How to downgrade

Hey guys,
I want to downgrade from a 4.3 kernel and Rom to 4.2. How do i achieve this without bricking my phone.

ArtyJay said:
Hey guys,
I want to downgrade from a 4.3 kernel and Rom to 4.2. How do i achieve this without bricking my phone.
Click to expand...
Click to collapse
The usual way, you do all necesarry whipes, and then you install the rom you want. But: no dirty flashesas 4.2 and 4.3have eome architectural diferences (whipe sostem, whipe cache and dalvik, in mounts and storage format both sistem and SD card - better if you back up your photos, music and all media to pc as this deletes everithing you have on in), then connect your phone to PC/Laptop via USB and copy the files of the rom you want, the G-apps and/or kernel

dark'em said:
The usual way, you do all necesarry whipes, and then you install the rom you want. But: no dirty flashesas 4.2 and 4.3have eome architectural diferences (whipe sostem, whipe cache and dalvik, in mounts and storage format both sistem and SD card - better if you back up your photos, music and all media to pc as this deletes everithing you have on in), then connect your phone to PC/Laptop via USB and copy the files of the rom you want, the G-apps and/or kernel
Click to expand...
Click to collapse
wipe all and factory reset !

leap_ahead said:
wipe all and factory reset !
Click to expand...
Click to collapse
Yup' you're right!

dark'em said:
Yup' you're right!
Click to expand...
Click to collapse
Do I change the 4.3 kernel or ROM first to 4.2?

ArtyJay said:
Do I change the 4.3 kernel or ROM first to 4.2?
Click to expand...
Click to collapse
Always after full whipe and factory reset you:
1. Flash the desired rom (it has a kernel of it's own
2. Flash Gapps (they have to be Gapps for your specific rom android version)
3. Flash a custom kernel you like (if you will skip step 3 the rom will still boot up case it comes with it's own kernel, but if you downgrade it's good to flash one case the rom one is mostlikely outdated; and remember that the kernel you flash has to have suport for he android version you flash)
My advice to you if you downgrade is not to go back further than ICS case newer apps will probably have compatibility issues with really old outdated system versions

dark'em said:
Yup' you're right!
Click to expand...
Click to collapse
dark'em said:
Always after full whipe and factory reset you:
1. Flash the desired rom (it has a kernel of it's own
2. Flash Gapps (they have to be Gapps for your specific rom android version)
3. Flash a custom kernel you like (if you will skip step 3 the rom will still boot up case it comes with it's own kernel, but if you downgrade it's good to flash one case the rom one is mostlikely outdated; and remember that the kernel you flash has to have suport for he android version you flash)
My advice to you if you downgrade is not to go back further than ICS case newer apps will probably have compatibility issues with really old outdated system versions
Click to expand...
Click to collapse
Thanks a lot! one last question what 4.2 Kernel would you recommend with CyanogenMod 10.1.2

ArtyJay said:
Thanks a lot! one last question what 4.2 Kernel would you recommend with CyanogenMod 10.1.2
Click to expand...
Click to collapse
Marmite 8.7 CM

[Q] can't reboot into recovery mode

hey guys
my first post on xda actually yesterday i updated my xgamerz v2.2 rom to xgamerz v3 using clockworkmod recovery v6.0.28 everything else worked fine except it vant reboot into recovery ... i CAN reboot in download mode but not recovery.
when i reboot into recovery the samsung galaxy sl page slowly fades away and again reboots the phone into normal mode without going to recovery ( i.e. directly loading to os )
plz help asap

for now do a clean flash from ddlf2 then upgrade v3.. your problem will get solved.. and always wipe dalvik cache and format the system when upgrading the same custom rom. if you are going to any other custom rom just do full clean flash form ddlf2.. so that the rom won't cause any problem in your day to day life..
hope this helps you.

maxs8007 said:
for now do a clean flash from ddlf2 then upgrade v3.. your problem will get solved.. and always wipe dalvik cache and format the system when upgrading the same custom rom. if you are going to any other custom rom just do full clean flash form ddlf2.. so that the rom won't cause any problem in your day to day life..
hope this helps you.
Click to expand...
Click to collapse
you mean go back to gingerbread 2.3.6 then flash cm10 and then xgamerz with all user data gone
instead of doing all this , i was wondering if i could flash a recovery using nandroid manager app( it has an option to flash recovery) but iam not getting a proper download link for my firmware. . . plz guide

try this : https://googledrive.com/host/0B4xN9...3.0/kernel-cm-10-20130906-galaxysl-signed.zip . and if this didn't work then you'll need to do a clean flash. just do titanium backup of all apps and also backup all you contacts and messages. restore them when you flash v3. you'll get all your userdata and apps as it is. and no need to flash cm10 after ddlf2, just directly flash v3 after flashing ddlf2 ( v3 is based on cm10, so no need to flash that)

if this didn't work then you'll need to do a clean flash. just do titanium backup of all apps and also backup all you contacts and messages. restore them when you flash v3. you'll get all your userdata and apps as it is. and no need to flash cm10 after ddlf2, just directly flash v3 after flashing ddlf2 ( v3 is based on cm10, so no need to flash that) [/QUOTE]
i have downloaded it but neither rom tool box nor
nandroid manager app is able to restore it... will u plz tell me how to use it.

maxs8007 said:
for now do a clean flash from ddlf2 then upgrade v3.. your problem will get solved.. and always wipe dalvik cache and format the system when upgrading the same custom rom. if you are going to any other custom rom just do full clean flash form ddlf2.. so that the rom won't cause any problem in your day to day life..
hope this helps you.
Click to expand...
Click to collapse
reply

try this application : https://play.google.com/store/apps/details?id=com.cgollner.flashify if this didn't work then you'll not have any other way except clean flash. till my knowledge I think it's not possible to flash any recovery on jb ROM's due to different partitioning. i'll still suggest you to do a full app backup with titanium backup and restore it when you flash v3. happy flashing

maxs8007 said:
try this application : https://play.google.com/store/apps/details?id=com.cgollner.flashify if this didn't work then you'll not have any other way except clean flash. till my knowledge I think it's not possible to flash any recovery on jb ROM's due to different partitioning. i'll still suggest you to do a full app backup with titanium backup and restore it when you flash v3. happy flashing
Click to expand...
Click to collapse
nope that didnt work :'(

go to xgamers v3 page ( forum.xda-developers.com/showthread.php?t=2192613) and read the 3rd post which says " IMPORTANT! READ BEFORE FLASHING
THIS RELEASE!" you'll come to know what I'm trying to tell you since beginning.. most important : 1st and 5th point.

Clean Kat v4 for Huawei Honor Holly....!

;Its my first thread on xda
ROM Name- CleanKat V4.0
Device- Huawei Honor Holly (Ported it from Walton Primo GF2)
ROM Developer- Umang Leekha
ROM Porter- Waseem Maya
For Internal Storage Bug Fixing - Muhammad Waqas Hameed
If I forgot someone then tell me....!
Features
1. Based on AOSP KITKAT
2.Better battery life than other KK
ROMs, stock kernel
3.Added data traffic monitor in settings,
you can toggle it
4.Added 13 new battery icon styles in
settings, ported from carbon rom
5.Beautiful Cleankat lockscreen,
screenshot attached
6.Beautiful Cleankat bootanimation and
bootlogo
7.Cleankat music player, advanced
calculator and browser
And....!
And.........!
And...............!
Many More.............!
Now Come to the main thread...!
Hello Guys....!
Now presenting You CLEAN KAT V4 for HUAWEI HONOR HOLLY
PURE AOSP 4.4 (Kitkat)
Ported by Waseem Maya (ME)
Instructions to Install:
Go Into Philz Touch Recovery
Select Wipa & Data
Select Clean To Install a New Rom
Select Install Zip from SD Card
Select Clean Kat V4
Install it....
Done
After Install
Clear Cache & Dalvik Cache
Bugs:
It has no bug...!
Engineering Mode:
MTK Enginnering Mode APK Iin Attachment....!
you can increase sound level of your phone in Engineering Mode...!
If you found any bugs please inform me.....!
Download Link:
http://d-h.st/1w68​

Please add this rom on Huawei Honor Holly main page

Great work! Can you list the features of this ROM?

fiorezy said:
Great work! Can you list the features of this ROM?
Click to expand...
Click to collapse
Ok wait
Sent from my Hol-U19 using Tapatalk

thanks for your accomplishment
does it support Arabic language completely
does it include GAPPS or i need to flash them seperately
can i install it thru twrp recovery ? if yes how ?
best regards

I dont know if it supports Arabic or not and you dont need flash gapps its already included yes you can flash using twrp band do wipe data factory reset and install after install clear cache and dalvik cache.... Now reboot...! Done
Sent from my Hol-U19 using Tapatalk

waseemmayaa said:
I dont know if it supports Arabic or not and you dont need flash gapps its already included yes you can flash using twrp band do wipe data factory reset and install after install clear cache and dalvik cache.... Now reboot...! Done
Sent from my Hol-U19 using Tapatalk
Click to expand...
Click to collapse
how can i check if it support Arabic before flashing it ? any idea

musafercom said:
how can i check if it support Arabic before flashing it ? any idea
Click to expand...
Click to collapse
I'm gonna test it then I will tell you

fiorezy said:
I'm gonna test it then I will tell you
Click to expand...
Click to collapse
Bootloop
EDIT: I fixed it after changing boot.img with stock.
Great ROM and very smooth, btw it SUPPORTS ARABIC!

fiorezy said:
Bootloop
EDIT: I fixed it after changing boot.img with stock.
Great ROM and very smooth, btw it SUPPORTS ARABIC!
Click to expand...
Click to collapse
CAN YOU EXPLAIN MORE.
JUST TO MAKE SURE DOES IT SUPPORT ARABIC FULLY.
WHAT IS btw ?
I AM ON STOCK ROM
MY DEVICE IS ROOTED AND ON TWRP RECOVERY WHAT SHOULD I DO IN STEPS TO FLASH THIS ROM WITHOUT GETTING STOCK IN A BOOT LOOP IF YOU GREATLY RECOMMEND THE ROM AND ITS STABLE WITHOUT BUGS AND HOW TO GO BACK TO STOCK ROM IF I DO NOT LIKE OR IF SOMETHING GO WRONG.
THANKS & BEST REGARDS

musafercom said:
CAN YOU EXPLAIN MORE.
JUST TO MAKE SURE DOES IT SUPPORT ARABIC FULLY.
WHAT IS btw ?
I AM ON STOCK ROM
MY DEVICE IS ROOTED AND ON TWRP RECOVERY WHAT SHOULD I DO IN STEPS TO FLASH THIS ROM WITHOUT GETTING STOCK IN A BOOT LOOP IF YOU GREATLY RECOMMEND THE ROM AND ITS STABLE WITHOUT BUGS AND HOW TO GO BACK TO STOCK ROM IF I DO NOT LIKE OR IF SOMETHING GO WRONG.
THANKS & BEST REGARDS
Click to expand...
Click to collapse
btw= by the way
I already tried this ROM and i'm sure that it fully supports Arabic, It was very smooth and handy, I used it for short minutes then I went back to MIUI because I didn't like the full grey design.
To install it, first at all, copy the zip file on your SD card, Boot into recovery mod, backup you current ROM to SD card in case something wrong happened. After that, wipe data and cache then flash Clean Kat, finally wipe dalvik cache and tap reboot system.
In case you got bootloop or you didn't like Clean Kat, just go back to twrp and restore your backup.

fiorezy said:
btw= by the way
i already tried this rom and i'm sure that it fully supports arabic, it was very smooth and handy, i used it for short minutes then i went back to miui because i didn't like the full grey design.
To install it, first at all, copy the zip file on your sd card, boot into recovery mod, backup you current rom to sd card in case something wrong happened. After that, wipe data and cache then flash clean kat, finally wipe dalvik cache and tap reboot system.
In case you got bootloop or you didn't like clean kat, just go back to twrp and restore your backup.
Click to expand...
Click to collapse
do i need to fatctory reset ?
Does that mean i do not need stock recovery to do that.
How to go to twrp recovery if i got a bootloob

musafercom said:
do i need to fatctory reset ?
Does that mean i do not need stock recovery to do that.
How to go to twrp recovery if i got a bootloob
Click to expand...
Click to collapse
Don't do factory reset, just install twrp first
Go to this thread and you will find many useful things

fiorezy said:
don't do factory reset, just install twrp first
go to this thread and you will find many useful things
Click to expand...
Click to collapse
i have twrp already
thanks

How was the rom ( CleanKat ) now I am porting Resurrection Remix 5.1.1 for HHH but there are bugs in it....!
Sent from my Hol-U19 using XDA Free mobile app

waseemmayaa said:
How was the rom ( CleanKat ) now I am porting Resurrection Remix 5.1.1 for HHH but there are bugs in it....!
Sent from my Hol-U19 using XDA Free mobile app
Click to expand...
Click to collapse
Clean Kat was very smooth, no bugs so far, didn't use it for much time, but I think everything is working fine, besides a liitle bug when scrolling through Download files, and there is no option to disable soft keys.

You can disable it by editing build.prop
Sent from my Hol-U19 using XDA Free mobile app

Help me pls. My phone is on bootloop after flashing cleankat rom. How can i replace the boot.img of cleankat rom to stock boot.img?i have no.pc,only phone. I tried moving stock boot.img to cleankat rom using xplore but it corrypt the zip file. Pls help

yuansmart said:
Help me pls. My phone is on bootloop after flashing cleankat rom. How can i replace the boot.img of cleankat rom to stock boot.img?i have no.pc,only phone. I tried moving stock boot.img to cleankat rom using xplore but it corrypt the zip file. Pls help
Click to expand...
Click to collapse
Give me your stock boot.img, I will try to upload for you the whole ROM tomorrow

How can i fimd my stock boot.img?pls