Hi All,
Bit of a newbie on the note, actually got it yesterday from Amazon UK. Had a play and decided to install a custom ROM.
Tried a number of methods but having no luck at all :/
ROMs tried so far are;
Omega v2.0
Revolution 4.3
So far I've installed cwm from the play store and couldn't do anything, i then tried cwm 6.0.2.8 & su which has installed but still nothing
Symptoms seem to be it loads into the installation then locks up, Left it sitting for 10 mins + with no indication of any progress. This is normally at the the option to wipe/not wipe. Note seems to lock up.
Bit confused to be honest......
Any help would be greatly appreciated.
Many thanks,
Dave.
[email protected] said:
Hi All,
Bit of a newbie on the note, actually got it yesterday from Amazon UK. Had a play and decided to install a custom ROM.
Tried a number of methods but having no luck at all :/
ROMs tried so far are;
Omega v2.0
Revolution 4.3
So far I've installed cwm from the play store and couldn't do anything, i then tried cwm 6.0.2.8 & su which has installed but still nothing
Symptoms seem to be it loads into the installation then locks up, Left it sitting for 10 mins + with no indication of any progress. This is normally at the the option to wipe/not wipe. Note seems to lock up.
Bit confused to be honest......
Any help would be greatly appreciated.
Many thanks,
Dave.
Click to expand...
Click to collapse
To get help it would be best to tell us your model number and the tablets current firmware version.
Hi kk,
Very true
Its a 8010 and build number is JRO03C.N8010XXBLK9
Thanks
Dave.
[email protected] said:
Hi kk,
Very true
Its a 8010 and build number is JRO03C.N8010XXBLK9
Thanks
Dave.
Click to expand...
Click to collapse
It looks like you are rooted, yes?
If not Zedomax has a nice tutorial here http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1/
kkretch said:
It looks like you are rooted, yes?
Click to expand...
Click to collapse
It would appear so, SU is still installed and ive just used 'root checker' off the play store.... It says rooted!
Regards,
Dave.
[email protected] said:
It would appear so, SU is still installed and ive just used 'root checker' off the play store.... It says rooted!
Regards,
Dave.
Click to expand...
Click to collapse
What custom ROM do you want to install and do you know if you have CWM recovery or TWRP installed?
Hi,
Looking to install either Omega 2.0 or Revolution 4.2....
If i power on with vol + i go into Darkmans cwm 6.0.2.8
Regards,
Dave.
[email protected] said:
Hi,
Looking to install either Omega 2.0 or Revolution 4.2....
If i power on with vol + i go into Darkmans cwm 6.0.2.8
Regards,
Dave.
Click to expand...
Click to collapse
First you do this at your own risk.
OK... I have installed Revolution HD........ The File is (Android_Revolution_HD-Note_10.1_4.3.zip)
First you need to have a micro sd card installed
Then put the (Android_Revolution_HD-Note_10.1_4.3.zip) file on the micro sd card
Then boot into CWM
I then wipe cache partion
I then wipe data/factory reset (this will erase all of your user data)
Then - install zip from sdcard
I then - choose zip from external sdcard.
I select the (Android_Revolution_HD-Note_10.1_4.3.zip) and that should be it.
NOTE: When the system re-boots it can take a good 5 - 8 minutes for the system to start up, so not to worry.
Hi,
Thanks for that, just followed your instructions to the letter.....
Its locked up again, im sat on the Welcome page with version and updated info. pressed Next and note locks up :/
Regards,
Dave.
[email protected] said:
Hi,
Thanks for that, just followed your instructions to the letter.....
Its locked up again, im sat on the Welcome page with version and updated info. pressed Next and note locks up :/
Regards,
Dave.
Click to expand...
Click to collapse
Let me get this right .... your stuck on the install screen for the revolution rom install?
Are you sure you have a good download of the zip file?
Have you tried to use Mobile Odin to flash the ROM?
Also Darkmans CWM has a problem with the Aroma installer. You may need to use High on Android CWM 6.0.1.1 flash any rom that uses an Aroma Installer.
To install Omega Rom 2.0.....^
... you neet either TWRP or HighOnAndroids CWM, does not install with any CWM!
It is caused by the Aroma installer, so flash HighOnAndroids CWM and then the rom, it works.
http://forum.xda-developers.com/showthread.php?p=31760955
Helped? Thnx-button would be nice.
[email protected] ....... I guess we found out why it installed for me and not for you, I have HighOnAndroids version of CWM and I also rooted using his software. Here is a link to that whole process .....http://forum.xda-developers.com/showthread.php?t=1831152
kkretch said:
[email protected] ....... I guess we found out why it installed for me and not for you, I have HighOnAndroids version of CWM and I also rooted using his software. Here is a link to that whole process .....http://forum.xda-developers.com/showthread.php?t=1831152
Click to expand...
Click to collapse
Guys,
Thank you very much, as posted it was a problem with the version of CWM i was running. I installed HighOnAndroids CWM and install went perfectly.
Many thanks all + rep given to all who contributed :good:
Regards,
Dave.
Related
i am surely new at this but after some research over the internet i decided to install a custom recovery on my nexus s(jellybean 4.1.2)stock. after i downloaded "netarchy-nexus-1.3.7-cfs-2.3.4-signed" I went into recovery and installed it. but when i rebooted my phone it got stuck on the gppgle screen. please help, is it even fixable.:fingers-crossed::crying:
you just flashed a really outdated and unsupported kernel. flash a new one for stock jelly bean.
ej8989 said:
you just flashed a really outdated and unsupported kernel. flash a new one for stock jelly bean.
Click to expand...
Click to collapse
How to root nexus s i9023 step by step, cause i'm a newby. and link the utility that i'' use it.
thanks
abraham93 said:
How to root nexus s i9023 step by step, cause i'm a newby. and link the utility that i'' use it.
thanks
Click to expand...
Click to collapse
here: http://forum.xda-developers.com/showthread.php?p=33957041
After installing, do this then you're all set:
1. Click "Full Driver Installation Guide - Automatic + Manual" then follow the instructions carefully.
2. In step 2, choose and click "PdaNet Drivers"
3. Follow all instructions, then click "Full Driver Test", you'll see a success message if you did everything right.
4. Go back to main program window, then click "Unlock". Make sure to backup your device because this will wipe everything in it.
5. Tick the "Custom Recovery" box under Root menu then click "Root".
6. Done. Stand up and shout "YEAAAA!!!"
ej8989 said:
you just flashed a really outdated and unsupported kernel. flash a new one for stock jelly bean.
Click to expand...
Click to collapse
could you please send me a link for a good kernel or just the name of it.
naveen bailey said:
could you please send me a link for a good kernel or just the name of it.
Click to expand...
Click to collapse
If you're gonna stick to Stock 4.1.2 ROM, i recommend using either of these two:
_thalamus kernel: LINK (Reuploaded because thalamus removed it)
FloHimself Stock kernel: LINK (This has a few more features but still closer to stock. Can be activated via NSTools)
ej8989 said:
If you're gonna stick to Stock 4.1.2 ROM, i recommend using either of these two:
_thalamus kernel: LINK (Reuploaded because thalamus removed it)
FloHimself Stock kernel: LINK (This has a few more features but still closer to stock. Can be activated via NSTools)
Click to expand...
Click to collapse
tried both of them same result. wasnt able to install crespo kernel but was able to install the other one. i also tried to install matr1x.v24 but no use. also i wasnt able to install cm9 and cm7 earlier when everything was fine. dont know why
should i try and unroot the phone with wug toolkit using the soft bricked option. maybe that might help, and then install the kernels.:fingers-crossed:
naveen bailey said:
tried both of them same result. wasnt able to install crespo kernel but was able to install the other one. i also tried to install matr1x.v24 but no use. also i wasnt able to install cm9 and cm7 earlier when everything was fine. dont know why
should i try and unroot the phone with wug toolkit using the soft bricked option. maybe that might help, and then install the kernels.:fingers-crossed:
Click to expand...
Click to collapse
or should i try and deleting every **** there is on my phone like boot, system everything, and then flashing the rom and then the kernel.. what say..
naveen bailey said:
i am surely new at this but after some research over the internet i decided to install a custom recovery on my nexus s(jellybean 4.1.2)stock. after i downloaded "netarchy-nexus-1.3.7-cfs-2.3.4-signed" I went into recovery and installed it. but when i rebooted my phone it got stuck on the gppgle screen. please help, is it even fixable.:fingers-crossed::crying:
Click to expand...
Click to collapse
If you can still boot to recovery you can easily fix this.
Download any ROM
Reboot to recovery
In mount:
-format system
-format data
-format cache
-mount usb
Copy your ROM to your phone.
Safely dismount USB on your computer
Unmount USB
Flash the ROM you downloaded
Reboot
Enjoy.
Edit: actually, you need a kernel with support for stock, which i provide in my marmite thread.
http://forum.xda-developers.com/showthread.php?t=1719775
[GUIDE] Build a Kernel! + [KERNEL] marmite_v6.7 MTP
bedalus said:
If you can still boot to recovery you can easily fix this.
Download any ROM
Reboot to recovery
In mount:
-format system
-format data
-format cache
-mount usb
Copy your ROM to your phone.
Safely dismount USB on your computer
Unmount USB
Flash the ROM you downloaded
Reboot
Enjoy.
Edit: actually, you need a kernel with support for stock, which i provide in my marmite thread.
http://forum.xda-developers.com/showthread.php?t=1719775
[GUIDE] Build a Kernel! + [KERNEL] marmite_v6.7 MTP
Click to expand...
Click to collapse
tried to flash cm9 and cm7 a couple of times, didnt work. it says installation aborted due to package not found. now im really starting to freak out a lil bit
What device do you have?
also tried to install "miui_NS_1.12.16_d88b138851_4.0" didnt work cause installation aborted, cannot find package(bad). what to do now. but i really appreciated the efforts you guys have made.
Edit: actually, you need a kernel with support for stock, which i provide in my marmite thread.
http://forum.xda-developers.com/showthread.php?t=1719775
[GUIDE] Build a Kernel! + [KERNEL] marmite_v6.7 MTP[/QUOTE]
naveen bailey said:
i have a nexus s (jz054k),not sure whether it is I9023 or I9020 cause in settings it shows I9023 and in bootloader it shows I9020.also tried to install "miui_NS_1.12.16_d88b138851_4.0" didnt work cause installation aborted, cannot find package(bad). what to do now. but i really appreciated the efforts you guys have made.
Click to expand...
Click to collapse
naveen bailey said:
naveen bailey said:
i have a nexus s (jz054k),not sure whether it is I9023 or I9020 cause in settings it shows I9023 and in bootloader it shows I9020.also tried to install "miui_NS_1.12.16_d88b138851_4.0" didnt work cause installation aborted, cannot find package(bad). what to do now. but i really appreciated the efforts you guys have made.
Click to expand...
Click to collapse
it is i9023.
i9020 is google's general naming for all models of this phone.
should i try and unroot the phone with wug toolkit using the soft bricked option. maybe that might help, and then install the kernels
Click to expand...
Click to collapse
have you tried doing this?
Click to expand...
Click to collapse
ej8989 said:
naveen bailey said:
it is i9023.
i9020 is google's general naming for all models of this phone.
have you tried doing this?
Click to expand...
Click to collapse
no not yet, but am gonna do it. will let you know how it goes out thanks
Click to expand...
Click to collapse
ej8989 said:
naveen bailey said:
it is i9023.
i9020 is google's general naming for all models of this phone.
have you tried doing this?
Click to expand...
Click to collapse
unsuccesful...didnt work..
Click to expand...
Click to collapse
Do you see a padlock below google logo?
ej8989 said:
Do you see a padlock below google logo?
Click to expand...
Click to collapse
ya,its bootloader is unlocked..what should I do now..
Did this ever get resolved?
As I am currently running into the same problem.
Hi guys, please help me I've downloaded the rom for p3100 and I have
philz recovery. I did the steps according to adi When the setup is finished it says flashed successful and I reboot it, It hangs at
the "samsung galaxy tab 2" screen ive waited for 5 hrs and nothings
happen. My kernel is Agni kernels that adi provided for sungsonic 2
and I did a clean install ive wiped everything. What should I do?
Should I flash jellybean 4.2.2 first? any suggestions? :crying:
ZeeOwns said:
Hi guys, please help me I've downloaded the rom for p3100 and I have
philz recovery. I did the steps according to adi When the setup is finished it says flashed successful and I reboot it, It hangs at
the "samsung galaxy tab 2" screen ive waited for 5 hrs and nothings
happen. My kernel is Agni kernels that adi provided for sungsonic 2
and I did a clean install ive wiped everything. What should I do?
Should I flash jellybean 4.2.2 first? any suggestions? :crying:
Click to expand...
Click to collapse
I suggest u to change your custom kernel to blackhawk next kernel and don't forget to flash bloob next ...
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
ZeeOwns said:
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
Click to expand...
Click to collapse
Format your internal memory via PC.. Go to recovery wipe data, cache n delvk.. Go to download mode and Flash stock 4.1.2 of ur region.. Root ur tab.. Install latest Philz touch recovery.. Then install adi's sshdv4..follow all instructions.. DONT INSTALL ANY CUSTOM RECOVERY AT THE TIME OF INSTALATION.. Good luck..
¤Help = Thanked ©
Sent from Heaven
solved?
ZeeOwns said:
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
Click to expand...
Click to collapse
Hi mate, did you solve it?
Don't worry, as long as you have recovery mode and download mode you have good chances for happy-end
Maybe you're too far from stock now with all your kernels etc, so something is not compatible.
Best you can do IMO is to flash via Odin3_v1.87 any stock ROM for your region (there are many tutorials for using Odin if you never did it) if after unzipping only one single big file appears, choose it under PDA (don't check re-partition), set you Tab into download mode and flash it. If several files are there, each belongs under its section. (in that case if you are not sure how, just quote my post and ask again, I will answer you)
After that you can root the stock ROM, install CWM recovery and flash whatever you wish
tetakpatak said:
Hi mate, did you solve it?
Don't worry, as long as you have recovery mode and download mode you have good chances for happy-end
Maybe you're too far from stock now with all your kernels etc, so something is not compatible.
Best you can do IMO is to flash via Odin3_v1.87 any stock ROM for your region (there are many tutorials for using Odin if you never did it) if after unzipping only one single big file appears, choose it under PDA (don't check re-partition), set you Tab into download mode and flash it. If several files are there, each belongs under its section. (in that case if you are not sure how, just quote my post and ask again, I will answer you)
After that you can root the stock ROM, install CWM recovery and flash whatever you wish
Click to expand...
Click to collapse
Bro, unfortunately I've tried it 3x but no luck... Until now I cn't flash sshdv4 anyways thanks..
ZeeOwns said:
Bro, unfortunately I've tried it 3x but no luck... Until now I cn't flash sshdv4 anyways thanks..
Click to expand...
Click to collapse
Mate, I'm bit short ov experience with the Tab as it didn't make me yet so many problems like my phone did. If you can't revive it, just send it to Samsung service.
It isn't at all especially increddible idea but it won't cost too much and should definitely help.....
I have a rooted S-7500, with CWM recovery 5.0.2.8 installed. I (by mistake) allowed the 'software update' option to install a system update(or something) today by mistake (I know, you should never install system updates after rooting. My bad.) Since then, the phone directly goes to the cwm recovery mode on powering on, and i am unable to do anything else
I am not very well versed with the finer details of rooting bootloader recovery n all...so pls some details with steps...if possible .
Any help whatsoever...please I will be really grateful
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system
j.posarekar70 said:
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system
Click to expand...
Click to collapse
Thanks!!! It totally worked!
Just a clarification...now that i have got the stock rom back on my phone...am i right in saying that I have lost root access, my phone is totally back to the 'original' state, and i have lost CWM as well? Please correct me if I am wrong.
And assuming that I am correct(above), I would like to re-root my device(need to use proxydroid to surf internet over the damned proxy server!). So..can I follow the standard method, ie, can I do it the same way I had done before, or do i need to do something different now?
And once again...THANK YOU for your help! I had ended up hard bricking my previous phone, and was really scared when this happend to my aceP. You saved me!
Easy way to ROOT your SGAP
Yes by the time you flash stock rom you loss root even any custom recovery you flashed before...
but now if you want to root your SGAP again don't follow that guide again which you done before just follow this :
Download ODIN from Downloading link below (inside ODIN software folder)
Download any one recovery which you like TWRAP / CWM v5.5 (inside Custom recovery folder)
Download Root_SGAP.zip from Root folder & place that zip inside in your sd card
Click to expand...
Click to collapse
Download Link : GALAXY Ace Plus - Basic stuff
FOR Custom_Recovery :
Open odin, be sure your system has already install drivers & if kies is there close it.
extract recovery zip
connect device to pc in download mod (vol down + power + home) & select that (recovery) .md5 file in pda section inside ODIN software
Click start & wait to reboot device
FOR ROOT :
Now boot device in CWM mod ( vol up + down + power + home)
choose zip from sd card & select Root_SGAP.zip
DONE.
Click to expand...
Click to collapse
you've successfully ROOT & flash custom recovery on your device by just few simple steps
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
dubey.arpit said:
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
Click to expand...
Click to collapse
if you are going to stick on stock rom forever & only want to root device then stock recovery is ok for you...
but while dealing with custom roms, custom recoveries are smart choice.
it has lot of additional options than stock recovery.
so my opinion yes use custom recovery
Stuck in boot loop
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Snowflakes91 said:
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Click to expand...
Click to collapse
Check my guide on how to fix a bootloop in my sig
Question About Flashing A Stock ROM
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
cwm fixed
davidboca2000 said:
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
Click to expand...
Click to collapse
The new cwm by mb-14 is fixed and there are no more bootloops
Reply
bibhu60 said:
The new cwm by the wisp is fixed and there are no more bootloops
Click to expand...
Click to collapse
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Here it is..
davidboca2000 said:
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Click to expand...
Click to collapse
CWM 5.5.0.4 BY mb-14
I am also using this recovery from months i have flashed many roms and mods but it does not have any bugs.
Working perfectly...
Hit thanks if I helped You don't say it...
thanks
thanks for help
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS
So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
TheAndroidNinja said:
So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc
Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk
Frankenscript said:
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
Click to expand...
Click to collapse
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.
tokenpoke said:
Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx
TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx
Click to expand...
Click to collapse
Read my last post. Use a different ROM then. There are plenty to choose from.
To be clear what you need to do is use the CWM you have to install A DIFFERENT recovery, one more compatible with a lot of the current custom ROMs. I have used TWRP so for example:
1. Boot to CWM with TWRP package on your microSD
2. Flash TWRP
3. Reboot into recovery... CWM will be gone and you will have TWRP instead
4. In Twrp Wipe caches and format system
5. Still In Twrp, Flash ROM of your choice from ROM downloaded onto your microsd
6. Reboot system and give it time.
Let us know how it goes!
Thank you everyone
Thank You Thanx a lot for helping me guys
I downloaded TWRP n then downloaded the latest version of OMNI Rom and it worked
Thnak u soo much guys
CWM n Cyanagonemod has a lot of bugs and is really ****
CSP III said:
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.
Click to expand...
Click to collapse
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please
Glad you got your system to boot omnirom! You may need to re root the device... Others here can help you get that done, as I'm no expert.
TheAndroidNinja said:
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well
Thanx
CSP III said:
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well
Click to expand...
Click to collapse
Just flashed Supersu and it worked thanx a lot guys