Database Info

Multi-csc

How to fix the error of 'can't access to multi-csc' in recovery mode? I flashed with stock roms both kpq and kpe but still have the same problem. Plz help
Sent from my GT-I9003 using Tapatalk

tariq_devil said:
How to fix the error of 'can't access to multi-csc' in recovery mode? I flashed with stock roms both kpq and kpe but still have the same problem. Plz help
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
*#1234# has done on the telephone keypad

Yeah its showing the csc in that code but it prompts in the recovery
Sent from my GT-I9003 using Tapatalk

since you say you've tried kpe, why not do it completely and start with pit, then kpe, hten try to access you csc? and what is the full message in recovery? "can't access csc" is what I usually expect when flashing fw in odin, especially any fw that doesn't contain a csc file when upgrading. what is cwm trying to access the csc for?

Yeah the message is cant access csc. It comes after i flash xxkpq after flashing xxkpe. I guess there is no csc file in kpq
Sent from my GT-I9003 using Tapatalk

that is correct, but this is after using odin, not cwm. so, are you getting this message after flashing via odin, or in cwm recovery, as you said in your OP?

tariq_devil said:
How to fix the error of 'can't access to multi-csc' in recovery mode? I flashed with stock roms both kpq and kpe but still have the same problem. Plz help
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
Its not an error..
send from gt-i9003 using android keyboard

How to upgrade via Samsung Kies PC

hi all
i flashed xxkpe and tried to upgrade via samsung kies but it isnt working, what to do, it says it isnt supported...

I guess you need to unroot as well.

Hetalk said:
I guess you need to unroot as well.
Click to expand...
Click to collapse
hmm unroot via cwm recovery and than flash xxkpe cuz im still in titanium...?

Ditbardh said:
hmm unroot via cwm recovery and than flash xxkpe cuz im still in titanium...?
Click to expand...
Click to collapse
Kies won't work unless you are on stock firmware. You'll need to go back to stock firmware/kernel and then unroot.

Just unrooting won't since the issue. You'd have to refer to the stock firmware as well as kernel as told earlier.
you'd have a custom cf kernel with cwm, goto stock by flashing xxkpe starting from pit.
Press thanks if helped

iAmBalvinder said:
Just unrooting won't since the issue. You'd have to refer to the stock firmware as well as kernel as told earlier.
you'd have a custom cf kernel with cwm, goto stock by flashing xxkpe starting from pit.
Press thanks if helped
Click to expand...
Click to collapse
so all i need is to flash stock xxkpe ? cuz i did it before and when i tried to upgrade via samsung kies it sad that it isnt supported, ill try again and ill post here, thanks all

Go for your region specific firmware. Then unroot. I think there are unroot instructions on cfroot thread.
Sent from my GT-I9003 using xda app-developers app

Hetalk said:
Go for your region specific firmware. Then unroot. I think there are unroot instructions on cfroot thread.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
flashed xxkpe and before flashing it i flashed unroot zip but still cant upgrade via kies...

first update ur kies then connect ur i9003 to pc in Samsung Kies mode.but before that u must be on ur region specific rom (i.e from region in which u live) and u should not be rooted.

pratik_s said:
first update ur kies then connect ur i9003 to pc in Samsung Kies mode.but before that u must be on ur region specific rom (i.e from region in which u live) and u should not be rooted.
Click to expand...
Click to collapse
im in europe can anyone help me which firmware i must have... ?

Install your region csc if you are using multi csc
To check your csc type following code
*#272*[yourIMEI]#
Take backup before typing this code
This will erase all your data
Sent from my GT-I9003 using xda premium

Ditbardh said:
im in europe can anyone help me which firmware i must have... ?
Click to expand...
Click to collapse
You can try eithe kpq or kpu

[HELP] How to unroot and install trhe stock firmware?

Hi guys
I have a problem...i have rooted the galaxy s scl of my friend but now he want it unrooted.
I have the frankestain mod rom and i should unroot it and install a stock firmware..
How could i do it?

Flash kpe before flashing to another stock firmware such as kpu.
Sent from my GT-I9003 using xda premium

Flash XXKPE with Odin. The flash any other firmware of your choice

I still dont understand why everyone say to flash kpe first...
Seriously plz explain it to me !!
Sent from my GT-I9003 using xda app-developers app

Plz everyone here from the next time do this kind of chit-chat in general thread this is Development thread.
And for ans flash any stock rom using odin you will be unroot and on stovk rom too. For steps follow this thread.
http://forum.xda-developers.com/showthread.php?t=1133787

nicsptl said:
Plz everyone here from the next time do this kind of chit-chat in general thread this is Development thread.
And for ans flash any stock rom using odin you will be unroot and on stovk rom too. For steps follow this thread.
http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
I have done it but now in the phone there's only the bootanimation but nothing else...

G.Galante said:
I have done it but now in the phone there's only the bootanimation but nothing else...
Click to expand...
Click to collapse
you got bootloop, flash XXKPE+PIT it can solve your prob after flash that firmware,flash another stable firmware than XXKPE

simratcs said:
I still dont understand why everyone say to flash kpe first...
Seriously plz explain it to me !!
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Because kpe is came with full firmware that is (bootloader, pda, phone,csc)
And when you use pit file you need all these files
To unroot single pda file also works
If any problems facing then flash with pit+kpe
Correct me if I am wrong
Sent from my GT-I9003 using xda premium

why KPE+PIT
OK, first for all, we have 2 type of firmware.
1. one package .tar file.
2. component type firmware .tar file.
for one package type, you only see one tar file which are flash using odin place in the PDA box. this is the incremental patch from you current working phone. you find all the data still in place.
for the component type firmware, you will have 3 or 4 tar file to flash using odin and place it in respective box. you will need to reset you phone, all the data will gone.
so, why must using component type, if need to flash to stock. Becuase you already corropted the firmware.
1. you have change the recovery partition and rooted and with custome kernel.
2. you have converted to EXT4, (stock is rfs)
3. you have bootloop because the above you have done.
others which having same thing done but not at bootloop, its becuase their done the home work (search and read). this i'm very sure about it.
so, if you have the boot loop, mean you done some step wrong.
so to save you, follow the instruction on the link above you should be fine.
legend:
pit file - this is partition information table, to tell the odin and phone how to prepare the partition for flashing.
example: I9003_latona_20110114.pit
PDA tar: contant all the system partition.
example: I9003DXKF1-REV08-ALL-low-CL1020446.tar
CSC tar: contant of regional specified setting
example: GT-I9003-CSC-MULTI-OLBKB2.tar
Modem: contant the hardware setting.
example:MODEM_I9003DXKB2_REV_00_CL863799.tar
bootloader, do not use this, if you are not upgrading from Froyo to GB. as this is a very important portion of you phone. ( the name already tell you that, "boot" "loader") do not mass with it.
same as PC, when you infected by virus or you have done someting corrupted the file of windows, you will need a reformat or reinstall OS.
hence, for the phone, flash the KPE+PIT
same as PC, when you wanted to update the windows update, you will just click the update and the windows patch file will install, same as you flash the 1 package firmware.
that all, hope you can understant

chongns said:
why KPE+PIT
OK, first for all, we have 2 type of firmware.
1. one package .tar file.
2. component type firmware .tar file.
for one package type, you only see one tar file which are flash using odin place in the PDA box. this is the incremental patch from you current working phone. you find all the data still in place.
for the component type firmware, you will have 3 or 4 tar file to flash using odin and place it in respective box. you will need to reset you phone, all the data will gone.
so, why must using component type, if need to flash to stock. Becuase you already corropted the firmware.
1. you have change the recovery partition and rooted and with custome kernel.
2. you have converted to EXT4, (stock is rfs)
3. you have bootloop because the above you have done.
others which having same thing done but not at bootloop, its becuase their done the home work (search and read). this i'm very sure about it.
so, if you have the boot loop, mean you done some step wrong.
so to save you, follow the instruction on the link above you should be fine.
legend:
pit file - this is partition information table, to tell the odin and phone how to prepare the partition for flashing.
example: I9003_latona_20110114.pit
PDA tar: contant all the system partition.
example: I9003DXKF1-REV08-ALL-low-CL1020446.tar
CSC tar: contant of regional specified setting
example: GT-I9003-CSC-MULTI-OLBKB2.tar
Modem: contant the hardware setting.
example:MODEM_I9003DXKB2_REV_00_CL863799.tar
bootloader, do not use this, if you are not upgrading from Froyo to GB. as this is a very important portion of you phone. ( the name already tell you that, "boot" "loader") do not mass with it.
same as PC, when you infected by virus or you have done someting corrupted the file of windows, you will need a reformat or reinstall OS.
hence, for the phone, flash the KPE+PIT
same as PC, when you wanted to update the windows update, you will just click the update and the windows patch file will install, same as you flash the 1 package firmware.
that all, hope you can understant
Click to expand...
Click to collapse
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app

simratcs said:
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Kpe is the foundation of the other stock rom.

simratcs said:
That i already know man..
But why kpe first..
Does it like increases the battery life or what ??
Everyone says to flash kpe...
But what about ddkp3 ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
no that "must" use KPE, it depend on your choose, as long as it is component type firmware, i use DXKF1, so far so good. and most importantly you can use it with pit file. note: 1 package tar file can not use with pit file.
if you want to solve the bootloop, either you do trouble shoot the rootcause, or close you eyes, and once and for all "reformat" your phone.
that why we need the pit.
hope you "already" know that.
BTW, i see no different on KPE on battery life. i use DXKP9 it is a GB, and flash Bam Kernel. battery life is good 1.5day per charge.

[Q] How to revert back to stock DDLF2 from rooted state?

Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks

Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003

simratcs said:
Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003
Click to expand...
Click to collapse
Yes, just clean flash and the root is gone
Sent from my GT-I9003 using Tapatalk 2

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.

chongns said:
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.
Click to expand...
Click to collapse
Dude i think he is a new member so dont tell him such stuff that is a bit confusing for a newbie...
Let him just clean flash ddlf2
Sent from my GT-I9003

flash xxkpe then ddlf2

karanmirchandani96 said:
flash xxkpe then ddlf2
Click to expand...
Click to collapse
Hi, can I flash xxkpe on CWM recovery mode and update to DDLF2 from kies?
Just wanted to know can stock ROMs can be flashed from CWM recovery, just like cROM.

No u have to flash them via Odin only.
sent from Samsung galaxy S i9003 Remics JB v3

Thanks for the Info!!!

THANKS!
Flashed via ODIN as PDA, did wipe, cache clean and now I'm set...

hi i flashed ddlf2 everything is working except my wifi is there any solution?

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
use the android development section and download the ddlf2 files then use odin to flash it

amsad said:
hi i flashed ddlf2 everything is working except my wifi is there any solution?
Click to expand...
Click to collapse
Maybe this happened because you didn't clean install so here are the steps:
Download XXKPE from here.
Flash XXKPE by following the XXKPE install instructions (the archive should contain odin3 v1.83 or v1.85 if not here is odin3 v1.85)
Download DDLF2 from here (DDMF1 is the latest value pack so it's smoother and with better battery life)
Install DDFL2 or DDMF1( recommended) by following the value pack instructions (use only odin3 v3.04)
that's it, enjoy your stock rom
if this helped you ...hit the thanks button pls

Trying to change CSC, but I'm getting error?!

Hey guys.
Still haven't rooted my phone and still using the ****ty stock 4.1.2.
Today I've tried to change my CSC from Bulgaria to Germany and flash 4.2.2 via OTA, but when i type *#272*(IMEI CODE)# to change the CSC, I'm getting error that says
Connection problem or invalid MMI code
Click to expand...
Click to collapse
Read a topic about putting an "," after # but still didn't worked.
Any other solutions how to fix this error?
P.S - I've tried CSC Changer app for Samsung from Playstore but it requires root for our type of firmware.
QUICK QUESTION: Can I flash official 4.2.2 Germany ROM via ODIN without rooting my phone and will this action increase my binary counter? Thanks!

Yes you can flash german firmware with odin without root. And i think it will not increase your binary counter. But maybe another member knows for sure?
Greedings
Sent from my GT-I9105P using xda app-developers app

digitaliban said:
Yes you can flash german firmware with odin without root. And i think it will not increase your binary counter. But maybe another member knows for sure?
Greedings
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
Yes flashing via odin don t increase your binary counter.
Sent from my GT-I9105P using xda app-developers app

celticbg said:
Hey guys.
Still haven't rooted my phone and still using the ****ty stock 4.1.2.
Today I've tried to change my CSC from Bulgaria to Germany and flash 4.2.2 via OTA, but when i type *#272*(IMEI CODE)# to change the CSC, I'm getting error that says
Read a topic about putting an "," after # but still didn't worked.
Any other solutions how to fix this error?
P.S - I've tried CSC Changer app for Samsung from Playstore but it requires root for our type of firmware.
QUICK QUESTION: Can I flash official 4.2.2 Germany ROM via ODIN without rooting my phone and will this action increase my binary counter? Thanks!
Click to expand...
Click to collapse
*#272*IMEI# doesnt work on jellybean.
no need for rooting to flash stock.
any official stuffs flashed with odin will not increase the binary counter.
you may need a factory reset after flashing if the product code didnt change to DBT

Okay I just flashed 4.2.2 Germany (first rom released) with odin but I'm stuck in bootloop ?!
I did everything like it shoud be! What shoud I do now?!
EDIT:
Oh, sorry. It was my fault. Hard reset and fashed it again and now everything works perfect. Thank you all, now I have 4.2.2 ))