Related
Hello everyone, I considered putting this in the marketplace but it makes 100% more sense to have it here.
I'm selling my faulty nexus one for spare parts so if anyone needs a part of the phone (except the PCB that the microusb sits on)
give me a PM and we can come to some sort of arrangement, obviously undercutting ebay prices lol.
for example... lcd replacement, digitizer or camera, speaker, volume buttons etc.
I've got a weird one to ask about....
What about the bottom soft touch cover (that goes over the usb port)?
do you have the little black plastic piece that covers the bottom pcb? its got the little vibrator connected to it.
Mine is like slowing down and isnt as powerful and i think its the reason for my haptic feedback dying
MaximReapage said:
I've got a weird one to ask about....
What about the bottom soft touch cover (that goes over the usb port)?
Click to expand...
Click to collapse
Could you get a picture of a nexus one and draw on paint what bit you mean? lol
Hi, may I have the camera module, the flash module and the power/volume buttons? how much for them? also, can u send them to colombia? thx!
If not, I got a friend in USA who will receive them!
edit: and usb cable and charger!! I know, I've been very bad with my N1
Rikarudo said:
Hi, may I have the camera module, the flash module and the power/volume buttons? how much for them? also, can u send them to colombia? thx!
If not, I got a friend in USA who will receive them!
edit: and usb cable and charger!! I know, I've been very bad with my N1
Click to expand...
Click to collapse
PM me so we can sort it all out
Megacamz said:
Hello everyone, I considered putting this in the marketplace but it makes 100% more sense to have it here.
I'm selling my faulty nexus one for spare parts so if anyone needs a part of the phone (except the PCB that the microusb sits on)
give me a PM and we can come to some sort of arrangement, obviously undercutting ebay prices lol.
for example... lcd replacement, digitizer or camera, speaker, volume buttons etc.
Click to expand...
Click to collapse
Hi Magacamz! I wonder if you still have your LCD Replacement? For how much are you expecting to sell it? Would you send it using USPS International? If positive, we can arrange using Paypal or something similar...
Tnks!
gciola said:
Hi Magacamz! I wonder if you still have your LCD Replacement? For how much are you expecting to sell it? Would you send it using USPS International? If positive, we can arrange using Paypal or something similar...
Tnks!
Click to expand...
Click to collapse
i'll take second in line if he doesn't take this.
Megacamz said:
Could you get a picture of a nexus one and draw on paint what bit you mean? lol
Click to expand...
Click to collapse
It is literally the piece that goes over the USB port and gold power connectors on the bottom of the phone. It's the same material as the battery cover.
Hi to everyone whats up i have some Q and i think this is for DEV section, here is the tHing i opened my phone to clean it all and i have make ONE BIG mistake i acidently broke two small peaces ( look at picture i marked it with red circle and here is link to biger picture so you can see beter http://guide-images.ifixit.net/igi/nvbKG1sC1T3xY66q.huge ). Now all work fine but Camera, actually it is working butt when i take picture it doesn't save picture it just show me a gray instead of PIC and just FC/Camera stop working and funny thing is when i use camcorder it works and make a movie and after stop it also close cam FC/etc BUT IT SAVES MOVIE and i cam watch it so PLEASE TAKE A LOOK AT PIC AND PLEASE A LEAST IF YOU KNOW WHAT THIS PARTS IS I MEAN WHAT IS THE NAME OT THEM WRITE IT DOWN ON THREAD OR PM ME SO I CAN FIND THEM OR TAKE THEM FROM OTHER MOBO AND SOLDER THEM TO MY MOBO AGAIN THANKS ALLOT
update info
Following picture helps to indicate tantalum capacitors and other types:
1. Tantalum; 2. Tantalum; 3. Electrolytic Capacitor; 4. Electrolytic Capacitor; 5. 0805 Ceramic; 6. 1206 Ceramic; 7. 1210 Ceramic; 8 . High Q Porcelin RF; 9. Variable Trimmer; and 1/4 Watt leaded resistor as reference
WHAT IS THE BEST WAY TO SOLDER THEM AGAIN AND AS I CAN SEE IN MY CASE THERE IS No 5, 6 OR 7 I THINK AND AM SURE No 5 IS THIS SMALL ONE BUTT WHAT ABOUT BIGGER ONE CLOSER TO THIS HOLE ON MY MOBO AND THOSE I NEED ARE Non-Polarized Capacitor SO I THINK THAT SIDE OF EACH ONE WHEN SOLDERING ISNT MATER IF NOT PLEASE CORECT ME AND I FAUND THIS AS AM ASUMING THAT THIS IS CAUSING MY PROBLEM ACTUALY IT IS THOSE TWO CAPACITORS ARE FOR POWER MENAGMENT OF PRIMARY CAMERA ND I FIND THIS SITE SOME ONE TAKE A PART PHONE MOBO AND WRITE DOWN EWERY THING WHAT IS ON MOBO SO HERE IS WHAT I FAUND :
Location-Primary Camera Module
Function-User Interface
Comp Family-Passive
Comp Tipe-Capacitor
Qty-2
Component Description-Ceramic Multilayer - X5R/X7R
Markings-Brown
Form-0402
Caunt-2
Length- 1.00 mm[
Width- 0.50mm
and here is complete web page with table with all parts on mobo and other and i think that some one will find this useful http://www2.electronicproducts.com/Samsung_Google_Nexus_S_GT_I9020T-whatsinside_text-115.aspx THIS IS HUGE :laugh:
AND YUP ITS THE WAY I WANTED TO DO HERE IS VIDEO http://www.youtube.com/watch?v=EWeAOemTY_E and now i need to find this small pices of S******* ahhahahaha
Maybe Adam Outler it's your guy!!!
Sent from my Nexus S
Wisemath said:
Maybe Adam Outler it's your guy!!!
Sent from my Nexus S
Click to expand...
Click to collapse
hehehe nope am on my own on this thing as a can see and i didnt spend 3 hours on this and to not find and learn what to do NO WAY AM SMART GUY hehehe am IT Tec and not MOB tec but its almost the samE procedure just little smaller BUT I WILL TRY WITH HIM IF I FAIL
I was have the same problem with pictures (gray). I've renamed "DCIM" and "Camera" folders in SDCard for backup it, and pictures now works fine. Maybe you should try it, before do some hardware things .
Good luck! Hope you get it fixed. This thread belongs to the Q&A section, this isn't android development is it?
Sent from my Nexus S
If you already identified the component and have the necessary equipment (the thinnest solder iron and tweezer that you can find, as well as steady hands), all that's left is a good luck, man.
RL77LUC said:
I was have the same problem with pictures (gray). I've renamed "DCIM" and "Camera" folders in SDCard for backup it, and pictures now works fine. Maybe you should try it, before do some hardware things .
Click to expand...
Click to collapse
I HAVE TRIED THAT NO LUCK ahhahah and i know that i broke my board part so i only need to se which part it is and now i knoc couse my face front cam is working and camcoder also but primary cam wont save pic and there say that those broken pieces are for primary cam so i ONLY need to solder them back if some one have some god advice please write it down
Just solder them with a fine tip on a 15/30w soldering iron. Done it a few times, SMD components are small, but not impossible. Have something to hold the component down and a magnifying glass will help.
AlenKing said:
... so i ONLY need to solder them back if some one have some god advice please write it down
Click to expand...
Click to collapse
How about this:
Take a piece of copper wire about 1mm in diameter.
Wrap it around the soldering iron end.
Wait until it heats up enough.
Now you have your own micro-soldering iron!
Fraser34 said:
How about this:
Take a piece of copper wire about 1mm in diameter.
Wrap it around the soldering iron end.
Wait until it heats up enough.
Now you have your own micro-soldering iron!
Click to expand...
Click to collapse
Hmmm nice one but i have seen something like soldering paste you put it under smd and just put it in place and when you heat it up with hot air it solder hehe this one is best for small things like those
Sent from my Nexus S using xda premium
Hi again i have one problem more now i know what tipe of SMD are those two but i dont know on which to chose OK this small one is x5r 6.3-10v and biger one x7r is from 10-200v i think size of both are the same just this small one is gray and other is brown, but there is allot other parameters and i dont know which is the right one (here is the datasheet of those and please have a look and if you know which i need write it down thanks http://www.yageo.ru/pdf/HighCaps.pdf I REALLY NEEEEEED MY CAMERA hahahaha)CAN I JUST TAKE THEM BY THIS INFO THAT I HAVE NOW IS THAT ENOUGH
You really shouldn't be playing around with the motherboard if you aren't 100% sure what you're doing. But seeing as you already have, the best bet would be try contacting Samsung and if if they'll fix it under warranty. Just be sure not to say that YOU messed with it. Just put everything back to where it was and make it look like you didn't open it or touch it. I just got mine back from warranty for a faulty motherboard so I know they can replace it easy.
Good luck,
Regards,
Bomboholic
Bomboholic said:
You really shouldn't be playing around with the motherboard if you aren't 100% sure what you're doing. But seeing as you already have, the best bet would be try contacting Samsung and if if they'll fix it under warranty. Just be sure not to say that YOU messed with it. Just put everything back to where it was and make it look like you didn't open it or touch it. I just got mine back from warranty for a faulty motherboard so I know they can replace it easy.
Good luck,
Regards,
Bomboholic
Click to expand...
Click to collapse
hmmm as you can imagine this phone i a bit old hehehe so... and am IT so i have done this allot on comp mobos and other electronic stuff but now i dont know which tipe of those smds i need and when i find that i will solder them nice
AlenKing said:
hmmm as you can imagine this phone i a bit old hehehe so... and am IT so i have done this allot on comp mobos and other electronic stuff but now i dont know which tipe of those smds i need and when i find that i will solder them nice
Click to expand...
Click to collapse
Oh well thats nice. If you're an IT then you know what you're doing haha. Good luck on finding the sparts you need though!
Regardss,
Bomboholic
hello all looked every where seen similar ? but know answers any where .....have mt4gs that wont turn on just vibrates once was having problems with screen stuff looked distorted rainbow colored or screen not responding would have play with phone like slide keyboard in and out to get working again .....couldnt get to work pulled out battery put back in wouldnt start up.......same thing happen to the one before that similar prob still have it does same thing vibrates once........from what i gather from other posts is it might be flex cable have it apart flex cable looks fine ...would i be able to see if flex cable is messed up......... could it just be something came loose.......these are both factory oem no mods ...
If it's still under any kind of warranty I'd send it back with a note to quit returning the same phone to you. If you CAN send it, put a small indelible mark under the battery so you can check. If it's NOT covered you could theoretically fix it yourself if you're "electronics repair" inclined but it's not for the faint of heart....i.e., not easy.
If they try to SELL you another, you can get them on Ebay for half of what they'll try to sell you one for. For what they'll try to sell you one for, you can buy a Nexus 4 from google that's unlocked.....with enough change to take your GF out for a nice meal. A REALLY nice meal.
no warranty , not new to electronic repair or modding ....have two of these phone dont want to throw them out ..especially if it only needs and 18 dollar flex cable ...which would be cheaper than buying any used phone....... trying to find some info first so i dont waste money on flex cable for no reason ...ps phone is totally apart..........i think phone is turning on but nothing happens with screen and screen was buuging out when stopped working both times on both phones ..... any ideas thanx
Look at all the videos first.....
docflipside said:
no warranty , not new to electronic repair or modding ....have two of these phone dont want to throw them out ..especially if it only needs and 18 dollar flex cable ...which would be cheaper than buying any used phone....... trying to find some info first so i dont waste money on flex cable for no reason ...ps phone is totally apart..........i think phone is turning on but nothing happens with screen and screen was buuging out when stopped working both times on both phones ..... any ideas thanx
Click to expand...
Click to collapse
I just rebuilt my Slide (bought a new one that had a bad M/B on eBay for $65)--I tried to replace the digitizer & ended up breaking the LCD screen...The flex cable is between the LCD & the screen back mount....so it's not the easiest job.......Do yourself a favor & check out all the video on youtube first.
not a problem ..phones apart ...got skillz..... just looking for info ....i can take apart and put back together just about anything thats not the problem.ive done digi's ,broken screens,flex cables, power and volume buttons............ ive heard of this problem before just want to make sure i have the right solution ...so i dont buy the wrong part thank you
ps ...please no more posts about how hard it is.....
He does have a point, this phone is a pain in the ass compared to most, I too have disassembled many phones used to have a side business repair phones, and this was is possibly the biggest pain when it comes to how much sticky is used.
Anyway yeah it sounds like the main flex cable and that's where I would start.
Sent from my Nexus 7 using xda premium
So end result fixed first one....installed new main flex cable.....and tested it powered up and works fine just have to go back and screw her all together...was pain in the ass at the point where you need to separate lcd from slide housing but well worth will do another one tomorrow ....always first ones a ***** but not as hard as made to seem ......if any one needs help get at me will give pointers. will update again tomorrow
if any one has mt4gs and vibrates once and screen does not turn on its good bet its the main flex cable
same issue....
docflipside said:
So end result fixed first one....installed new main flex cable.....and tested it powered up and works fine just have to go back and screw her all together...was pain in the ass at the point where you need to separate lcd from slide housing but well worth will do another one tomorrow ....always first ones a ***** but not as hard as made to seem ......if any one needs help get at me will give pointers. will update again tomorrow
if any one has mt4gs and vibrates once and screen does not turn on its good bet its the main flex cable
Click to expand...
Click to collapse
i replaced the digitizer because it was cracked, in the process i broke the lcd, and tore the flex cable a little. i replaced both of those and now i cannot get the screen to turn on. if u or anyone else have any ideas that would be awsome! thanks in advance
p.s i have the htc mytouch 4g slide
There are multiple screen options for this phone, they all fit but aren't interchangeable, make sure your new one is made by the same company as old one
Sent from my Nexus 4 using xda premium
demkantor said:
There are multiple screen options for this phone, they all fit but aren't interchangeable, make sure your new one is made by the same company as old one
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
the phone was givin to me and i ordered the part on ebay it came from china. the package says. LH00042 LCD DISPLAY TOUCH SCREEN FOR MYTOUCH 4G. how would i know if it is the right part?
There are a few ways, usually the manufacturer is stickered on the back or product number. If you can't find this there is a line indented across the back of one and not the others
Also read this
http://forum.xda-developers.com/showthread.php?p=33221940
Sent from my Nexus 4 using xda premium
jayj4ysmith said:
the phone was givin to me and i ordered the part on ebay it came from china. the package says. LH00042 LCD DISPLAY TOUCH SCREEN FOR MYTOUCH 4G. how would i know if it is the right part?
Click to expand...
Click to collapse
This forum is dedicated to the MT4GS. Your description indicates the MT4G. Different devices.
Hastily spouted for your befuddlement
Hi, I have a p920 working fine, and I recently bought another p920 to my sister.. but that phone got a problem, the 3d feature doesn´t work well, the 2 images get overlaped, getting a double image mixed in the screen, this is happening with any 3d feature in the phone (games, camera, images, videos, etc). It is like a 3d tv without glasses, all blurry
I don´t know what can cause that, I tried a hard reset, and nothing happened.
I can´t find any kind of 3d setup inside the phone either.
Any clue??
Thank you
lgiorda said:
Hi, I have a p920 working fine, and I recently bought another p920 to my sister.. but that phone got a problem, the 3d feature doesn´t work well, the 2 images get overlaped, getting a double image mixed in the screen, this is happening with any 3d feature in the phone (games, camera, images, videos, etc). It is like a 3d tv without glasses, all blurry
I don´t know what can cause that, I tried a hard reset, and nothing happened.
I can´t find any kind of 3d setup inside the phone either.
Any clue??
Thank you
Click to expand...
Click to collapse
Try Adjusting the Depth Slider Icon of a tree /trees
defcomg said:
Try Adjusting the Depth Slider Icon of a tree /trees
Click to expand...
Click to collapse
Thanks for your reply,
but that´s just for the camera option, like I said I got that problem with any 3d feature (videos.games,galleries,etc), I just got one plane mixed with the both images, and that is not working with the camera either
lgiorda said:
Thanks for your reply,
but that´s just for the camera option, like I said I got that problem with any 3d feature (videos.games,galleries,etc), I just got one plane mixed with the both images, and that is not working with the camera either
Click to expand...
Click to collapse
Depth Slider works in Gallery 3D Game Converter try Updating to ICS if on GB
defcomg said:
Depth Slider works in Gallery 3D Game Converter try Updating to ICS if on GB
Click to expand...
Click to collapse
my other p920 is on ics, and i cant find that option, i go to gallery 3d or to game converter, but i didnt find the depth slider option.
can you be more specific please?
thank you again
lgiorda said:
my other p920 is on ics, and i cant find that option, i go to gallery 3d or to game converter, but i didnt find the depth slider option.
can you be more specific please?
thank you again
Click to expand...
Click to collapse
ohh sorry, i see what you mean. but that isnt solving the problem, i never see any deepness in the picture, just 2 images overlaped, like the 3d function is disabled, the same way you can see a 3d tv or a 3d cinema without the glasses on, 2 images overlaped without any deep at all
What rom or firmware is installed on the phone with problems?
drastic00 said:
What rom or firmware is installed on the phone with problems?
Click to expand...
Click to collapse
hi, GB.. without any custom rom, just the official gb
Bummer, it sounds like a bad screen, or someone broke the old one and replaced it with a standard LCD. Or a factory mistake.
Can you return it or get a replacement from LG?
drastic00 said:
Bummer, it sounds like a bad screen, or someone broke the old one and replaced it with a standard LCD. Or a factory mistake.
Can you return it or get a replacement from LG?
Click to expand...
Click to collapse
that´s what i´m affraid, maybe a disconnected cable in the inside?
I bough it from ebay, I can return it to the seller and get a new one but that will take a month until it gets to his hand and another month until the new cellphone gets to mine, so im trying to solve it by myself first.
Never hear about this problem before? because i google it and couldnt find anyone with the same problem
No, that's odd. My guess is the seller bought it broken and replaced the screen with a standard one. I would think if something is not connected it would not work at all.
IDEA: ask forum member "Dr. Mario." He's sharp on things like this.
Sent from my SubGenius™ LG P925 with XBSA vR3D ROM and supercharged Slack™
drastic00 said:
No, that's odd. My guess is the seller bought it broken and replaced the screen with a standard one. I would think if something is not connected it would not work at all.
IDEA: ask forum member "Dr. Mario." He's sharp on things like this.
Sent from my SubGenius™ LG P925 with XBSA vR3D ROM and supercharged Slack™
Click to expand...
Click to collapse
thanks my friend, i will
Standard LCD - most replacement LCDs doesn't come with ceramic plate (3D barrier). But, the ceramic plate can be shoehorned onto any LCD or possibly OLED screens as far as I am concerned.
Also, if present, check the thin ribbon cable leading to ceramic plate's driver chip (probably 7 pins ribbon cable) and reseat it on the motherboard.
If you ever find a dead P920 3D phone that's to be parted out, you probably can discombulate it for 3D screen - if it's untouched, good chance is that will still have intact LCD with original ceramic plate still on it. Try ebay.
Sent from my LG-P920 using xda premium
Dr. Mario said:
Standard LCD - most replacement LCDs doesn't come with ceramic plate (3D barrier). But, the ceramic plate can be shoehorned onto any LCD or possibly OLED screens as far as I am concerned.
Also, if present, check the thin ribbon cable leading to ceramic plate's driver chip (probably 7 pins ribbon cable) and reseat it on the motherboard.
If you ever find a dead P920 3D phone that's to be parted out, you probably can discombulate it for 3D screen - if it's untouched, good chance is that will still have intact LCD with original ceramic plate still on it. Try ebay.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
thanks for the info man!
I don´t have the proper tools to full disassemble the phone, but i will get it in the next few days and come back here to tell what i found.
really apreciate your time!
If you don't know what's missing, go ahead and take picture of motherboard - you don't have to take it out - just leave it inside and I will know which plug's missing and will be able to say if it have 3D barrier ceramic plate or not. If you already have taken it apart, you can go ahead and take picture of LCD.
Sent from my LG-P920 using xda premium
Dr. Mario said:
If you don't know what's missing, go ahead and take picture of motherboard - you don't have to take it out - just leave it inside and I will know which plug's missing and will be able to say if it have 3D barrier ceramic plate or not. If you already have taken it apart, you can go ahead and take picture of LCD.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
thank you man, but i finally decided to send it back to the seller.. now i´m waiting for the new one to arrive, and I hope this one will work fine
Thank for your help
lgiorda said:
Hi, I have a p920 working fine, and I recently bought another p920 to my sister.. but that phone got a problem, the 3d feature doesn´t work well, the 2 images get overlaped, getting a double image mixed in the screen, this is happening with any 3d feature in the phone (games, camera, images, videos, etc). It is like a 3d tv without glasses, all blurry
I don´t know what can cause that, I tried a hard reset, and nothing happened.
I can´t find any kind of 3d setup inside the phone either.
Any clue??
Thank you
Click to expand...
Click to collapse
Try This: watch a video in gallery turn 3d on , then push settings button and 3 settings should come up Brightness ,screen ratio and 3D format or something like that I dont know how its in your language. If you click the 3D format there will be 4 settings I believe you are on 3rd it looks really weird . try it im not sure
I need to replace the hardware keyboard in the Q. Reason is the 'b' key doesnt click much anymore, it has almost no travel when typing on it. Where can I buy a genuine replacement? Is it also difficult to replace?
Please, let me know if you can.
here you go ;
http://www.etradesupply.com/oem-motorola-photon-q-4g-lte-xt897-qwerty-keypad.html
This will not help you... Photon Q's keyboard is build in such way that there are golden circles with golden dot inside - each button has its own. Then, on those golden pads, there is a sticky film with metal caps which, when you press, they connect the dot with the circle around it. So presumably the thing that got broken on your phone is either the metal cap (it can get worn...) or it somehow moved (rather impossible). So the thing you want to buy is the sticky film (white foil) with metal caps. If thats not it, then you need the motherboard...
If I didn't explain it clearly, check the photos, for example in Cornholio GSM hardware mod thread
Thanks for the advice. Indeed, I believe that's the problem. Where to find a replacement for that one?
I've seen those replacements for XT894, which is the same. Search for that one and you will find it on Ebay.
Die Bruine said:
I've seen those replacements for XT894, which is the same. Search for that one and you will find it on Ebay.
Click to expand...
Click to collapse
....remove button foil, clean it and stick it back...
test it and let me know
How do I dismantle without breaking it? I can access the battery and the soldered SIM... what should I do to proceed further?
Thanks
antonyfirst said:
How do I dismantle without breaking it? I can access the battery and the soldered SIM... what should I do to proceed further?
Thanks
Click to expand...
Click to collapse
on youtube is Photon q Disassembly video
someone still need a replacement?
i work in a wearhouse that have cooperations with Motorola.
we have a lot of spareparts but i never needed them for now.
iam not sure if we have xt897 replacement keyboard because its not released here.
and the letters and numbers on the keyboard are only sticker i think.
but i will ask
Hi there, the keyboard sticker with metal pads would be handy spares, but do you have access to the slider ribbons? These are a wearing part - the one that joins the screen to the base.
I'd like a few of those!
Sent from my PHOTON Q using XDA Free mobile app
we have every little screw, rubber sealing or what ever. but iam the first of our company that asked to buy things intern.
some guys in our office need to contact motorola first and ask for permission. we will know more in a few days.
smoking weed can affect (mistake post)
Sounds good - I need 4x ribbons, 2x screens & digitizers, 3x batteries.
See what you can do - I'd take more if you can get it.
Sent from my PHOTON Q using XDA Free mobile app