Finally overclocked Kernal is here.thanks & credit goes to Rachit Rawat for making this happen
& most importantly me for taking risk.
original thread::''http://forum.xda-developers.com/showthread.php?t=2134810''
Disclaimer
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the resposibilities.
before doing this u have to make ur bootloader unlocked.just visit the link ''http://unlockbootloader.sonymobile.com''
then
Procedure :::
1.download flashtool from here''http://androxyde.github.com/index.html?1360795419000''
2.open flashtool and add ur device.follow the link ''http://forum.xda-developers.com/showthread.php?t=2033114''
3.tap on volume up button and connect the usb cable.a blue light will indicate.
4.now u r in fastboot mode.
5.then open the thunder icon.
4.click on fastboot mode.
5.in fastboot windows click ''Slelect kernal to flash''
6.now navigate to ur kernal
7.flash will start
Done.
i have tested it and i worked fine.
This is my first post.if i helped u then please tap on thanks.
kernal download Download link::''http://www.mediafire.com/?u69gm3nka58mzo5''
Why do you start this thread , original is here http://forum.xda-developers.com/showthread.php?t=2134810 . This is only spam.
Odp: Overclock Xperia J upto 1.3 GHZ.
Does it work with stock rom? Is unlocked bootloader needed?
edit i have just seen this is in development forum. it should actually be in the general or the q and a as you have not developed it yourself!
oh where it says thunder icon,it is not thunder it is actually lightning.....just to make it bit more clear
This make easy to flash kernel
JUST RENAME kernel_j.elf to kernel_j.img
you will see then flash it done :good:
djisgod said:
edit i have just seen this is in development forum. it should actually be in the general or the q and a as you have not developed it yourself!
oh where it says thunder icon,it is not thunder it is actually lightning.....just to make it bit more clear
Click to expand...
Click to collapse
boss,sory for my bad English.
RangerCrew89 said:
JUST RENAME kernel_j.elf to kernel_j.img
you will see then flash it done :good:
Click to expand...
Click to collapse
u mean flash it via CMD ?
lozohcum said:
Does it work with stock rom? Is unlocked bootloader needed?
Click to expand...
Click to collapse
it works with stock farmwire.it does not work in Cynogenmmod(CM)
or AOKP rom.
Unlocked bootloader is needed.if u do not know how to unlock bootloader then go to''http://unlockbootloader.sonymobile.com''
Tauhid786 said:
u mean flash it via CMD ?
Click to expand...
Click to collapse
lol, flash via flashtools need lappy PC
unlocked bootloader
firmware stock for backup :good:
Odp: Overclock Xperia J upto 1.3 GHZ.
Anyone tryed? How's battery life?
lozohcum said:
Anyone tryed? How's battery life?
Click to expand...
Click to collapse
man i tried it.not only 1 time 1 tried several times. works just superb.
xperia j ain't a sluggish device anymore.make a shot.
Odp: Overclock Xperia J upto 1.3 GHZ.
I'm still only considering unlocking bootloader. I don't want to lose my warranty and I need 100% working phone
lozohcum said:
I'm still only considering unlocking bootloader. I don't want to lose my warranty and I need 100% working phone
Click to expand...
Click to collapse
You often get this issue on these new smartphones - USB cable you use with charging don't work. I had that issue, and some of my friends had that too.
But I don't think people in service (at least in my country) pay too much attention if you have it unlocked or not. This is from my personal experience.
But if you cause overheating from overclock you must pay good, be careful
As of me - I am waiting for Stable FXP rom better than stock - then I'll unlock.
And, good work developer.
What score after overclock? I fail to unlock bootloader..fastboot cmd won't open. Maybe will try later..
Sorry my bad english
Sent from my ST26a using xda premium
it fixes just about all of the problems with laggy menus and launcher that the phones has and makes it a much more pleasurable experince to use the phone!
battery life is fine.i have had 100% stability since installing the kernel so no problems with bugs.
haizanlhkt said:
What score after overclock? I fail to unlock bootloader..fastboot cmd won't open. Maybe will try later..
Sorry my bad english
Sent from my ST26a using xda premium
Click to expand...
Click to collapse
Im test in antutu benchmark , i got 5381 but 3D 1175 , so fast 1.3ghz no lag , sorry cant post screenshot dont know why
Sent from my ST26i using xda app-developers app
Wow..nice score. Mine only around 4000. Will try again tonight to unlock and flash the kernel.
Sent from my ST26a using xda premium
Odp: Overclock Xperia J upto 1.3 GHZ.
Option58 said:
You often get this issue on these new smartphones - USB cable you use with charging don't work. I had that issue, and some of my friends had that too.
But I don't think people in service (at least in my country) pay too much attention if you have it unlocked or not. This is from my personal experience.
But if you cause overheating from overclock you must pay good, be careful
As of me - I am waiting for Stable FXP rom better than stock - then I'll unlock.
And, good work developer.
Click to expand...
Click to collapse
Yea, I'm waiting for stable CM too, but I think AKOP will be stable sooner.
I'm also going to try build CM for jlo from sources, I have downloaded source, now I need to add my device tree to build list and face with all errors.
About author of overclocked kernel, good job man! I will install it as only I unlock bootloader
Well i already tested on build number .. 28. .. 7 on xperia J
idk why the CWM from Vengeance Kernel not working , please shared if ur J got CWM working on this kernel..
check at original thread what i posted
Baseband shown error. Is it normal?
Sent from my ST26a using xda premium
Related
Flash it with your own risk... Read thoroughly. These are all Korean websites. I only provide link to the specific page. Not Download link or any Instructions.. apply your own knowledge
I will only provide links for some custom kernels and Roms For E300S/K/L which i have gathered from different Korean Websites. You need to log in to get the download links. Since i am not Korean i cannot do that for you. Hope someone here can help.
Kernels:
1. [GalaxyS4] [Kernel] [SKT / KT / LGU +] Immortal Kernel official 0927
Link: http://www.matcl.com/?m=bbs&bid=imbeded&uid=198243
Flash the tar file via odin.
Roms
For E300L only
[Exclusive] Korean version of the entire network through the brush S4 E300L ROM version Teamleader_V1.0b1 streamline our release! By Leader
Link:http://koxda.com/forum.php?mod=view...ra=page=1&filter=typeid&typeid=264&typeid=264
Advanced stock rom for E300L. (based on MG2 firmware)
download link- http://pan.baidu.com/share/link?shareid=2634014583&uk=2936308387
changelog and rom page:- http://koxda.com/forum.php?mod=viewthread&tid=147560
New official update for E300L. MH1 firmware
download link: http://pan.baidu.com/share/link?shareid=3439609242&uk=2936308387
For E300S/K
[ROM] [] Korean version of the whole network exclusive S4 E300S / K through brush version Teamleader_V1.0b1 streamline optimized ROM released! By Leader
Link: http://koxda.com/thread-125256-1-1.html
Advanced Stock Rom for E300K only. (based on MG2)
MG2 Beautify v8
link to rom page- http://koxda.com/forum.php?mod=view...ra=page=1&filter=typeid&typeid=264&typeid=264
download link- http://pan.baidu.com/share/link?shareid=3844122325&uk=2150598706
Perseus kernel for E300S/K
http://www.matcl.com/?m=bbs&bid=imbeded&uid=194616
Flash, Enjoy and Report.. Help others :good:
any testers here???
flashed the immortal kernel for E300L.. so far so good
mohaimed said:
any testers here???
Click to expand...
Click to collapse
The kernel for e300k is also working well. Using ROW.. very nice addition. Have not played with voltages yet. Looking forward to getting some extra time out of the battery.
Sent from my SHV-E300K using XDA Premium HD app
I have played a little with voltage settings. Reduce mpu by 50. So far stable but no improvement in battery life. Will drain the battery and nd charge it full. Then I will test again
mohaimed said:
I have played a little with voltage settings. Reduce mpu by 50. So far stable but no improvement in battery life. Will drain the battery and nd charge it full. Then I will test again
Click to expand...
Click to collapse
My highest processor times are 250 & 600 which I've lowered by 25.
What are you using to adjust the voltages? Does it have settings for both big and little? I'm using System Tuner Pro and I have also tried setCPU. Neither have separate settings for the two clusters.
I'm going to suggest stweaks to the developer although it looks from his git commits he is using Perseus or Adam as a road map so maybe he has it on his to do list.
Sent from my SHV-E300K using XDA Premium HD app
koe1974 said:
My highest processor times are 250 & 600 which I've lowered by 25.
What are you using to adjust the voltages? Does it have settings for both big and little? I'm using System Tuner Pro and I have also tried setCPU. Neither have separate settings for the two clusters.
I'm going to suggest stweaks to the developer although it looks from his git commits he is using Perseus or Adam as a road map so maybe he has it on his to do list.
Sent from my SHV-E300K using XDA Premium HD app
Click to expand...
Click to collapse
no.. u cannot set multi core values.. its not supported by the kernel yet.. i use trickster mode to change the MPU voltages.. try it. reduce it by 50.. not more. u might face problems
Immortal Kernel for E300K (koe1974's build)
For those who own an E300K. It's my personal build. If there is something you want to see in this kernel feel free to PM me.
kernel source is DiaDust's from here
initram is based on the stock with modifications from Perseus kernel
Change Log:
immortal_koeBuild_08132013_1916
DiaDust commits as of Aug. 11
rooted
init.d support (create /etc/init.d folder and chmod your scripts)
enabled zram
testing support for 3rd party tethering apps
exfat and external sdcard support
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Sent from my SHV-E300K using XDA Premium HD app
Kernel updated.. go to the link for changelog
Can u give me the download link for rom of my e300l i cant make an account in the koxda wesite i will be very thank full to u
.
Hi
I tried koe's kernel mod and after rebooting my sim card was not recognized.
Now i use the updated imortal kernel from this thread and everything seems ok so far.
I use prerooted and deodexed mf4 for e300l from from the e300s/k/L thread.
Perhaps i did something wrong i'm pretty new to this android flashing buisnes.
I will not rest till i bricked my phone...
Sent from my SHV-E300L using xda app-developers app
mzain109 said:
Can u give me the download link for rom of my e300l i cant make an account in the koxda wesite i will be very thank full to u
.
Click to expand...
Click to collapse
the website requires to enter a korean captcha to register. i dont know korean. sorry
badpixel said:
Hi
I tried koe's kernel mod and after rebooting my sim card was not recognized.
Now i use the updated imortal kernel from this thread and everything seems ok so far.
I use prerooted and deodexed mf4 for e300l from from the e300s/k/L thread.
Perhaps i did something wrong i'm pretty new to this android flashing buisnes.
I will not rest till i bricked my phone...
Sent from my SHV-E300L using xda app-developers app
Click to expand...
Click to collapse
why dont you flash the MG2 firmware? its the latest. go to this link http://forum.xda-developers.com/showthread.php?t=2285861
I would like to test it but I don´t know how to download it from Korean webpage.
docdan1 said:
I would like to test it but I don´t know how to download it from Korean webpage.
Click to expand...
Click to collapse
sorry mate.. in that case you need a help of the Korean who cant help you with the captcha which is needed to register..
mohaimed said:
sorry mate.. in that case you need a help of the Korean who cant help you with the captcha which is needed to register..
Click to expand...
Click to collapse
After 30minutes working with google- I downloaded the ROM so maybe tomorow.
docdan1 said:
After 30minutes working with google- I downloaded the ROM so maybe tomorow.
Click to expand...
Click to collapse
great work.. upload it here. we need your reviews
koe1974 said:
For those who own an E300K. It's my personal build. If there is something you want to see in this kernel feel free to PM me.
kernel source is DiaDust's from here
initram is based on the stock with modifications from Perseus kernel
Sent from my SHV-E300K using XDA Premium HD app
Click to expand...
Click to collapse
Tried the new kernel with the tethering test. The problem that it is having is that it is not calling on IWConfig or IW to watch the WiFi and create an ad-hoc. Other than that, the kernel is great bro. To me it actually runs better than DiaDust's main version. Keep up the great work.
Someone should also start working on E300L/S variants..
I have tried KoXDA ROM on my 300S. Works good
If somebody wants to - I puted it to FF because is difficult to download it from Korean pages.
......filefactory.com/file/6awzhdy605cv/n/KoXDA.com_E300S_amp_K_V1.0b1.rar
Click to expand...
Click to collapse
Make factory reset before flash. Then flash also CWM / because after flashing is korean language in CWM/
But you will loos samsung apps- as in custom ROMs normal
Starting logo will be Samsung :good:
Hey,
This is the modified kernel with TWRP 2.6.0.0 and CWM as a dual recovery option.
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* You may have voided your device's warranty.
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. [B]YOU[/B] are choosing to make these modifications on your device
* I absolutely disclaim any responsibility.
*/
Download Links
Xperia E Dual (C1604) : http://d-h.st/kSk
This is just a modified version of stock jellybean kernel 11.3.A.2.1, it contains TWRP v.2.6.0.0 and CWM. It does not contain any other modification. This kernel has been tested on Sony Xperia E Dual(C1604) running 11.3.A.2.1 jellybean firmware, so far there have been no issues.
Click to expand...
Click to collapse
Instructions
Installation
Flashing a kernel may require an unlocked bootloader which may result in voiding your device's warranty
Guide to Flashing Kernel via Flashtool (follow for unlocked bootloader only) : http://forum.xda-developers.com/showthread.php?t=1879982
Otherwise you may boot to fastboot mode by
Power off your device
Press Volume Up key while connecting to computer via USB.
Execute
Code:
fastboot flash boot /path/to/dualboot.img
Click to expand...
Click to collapse
Booting into Recovery
TWRP
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, press the volume down key a couple of times
You should be in recovery mode with orange notification bar
CWM
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, wait till it lights off
When notification bars lights up to green, press the volume down key
You should be in recovery mode with orange notification bar
FAQ
I don't like the concept of dual recoveries, is there any way i can have either one?
Yes, for
CWM standalone use http://forum.xda-developers.com/showthread.php?t=2276943
TWRP : http://forum.xda-developers.com/showthread.php?t=2505502
Is this compatible with jjm34's CM10?
Yes it is, is has been specially compiled in order to be compatible with the recovery used in jjm34's CM10 recovery.
Is this compatible on Xperia E single sim?
I have not tested it out on C1504/5 since I do not own that device, however you may install this at your own risk.
Is this compatible on ICS?
Once again I have not tested it out, the kernel used is the default JB kernel.
Credits
Androxyde for his flashtool
jjm34 for his cm10 port/CWM
FXP for the initial nanhu release
Great man you are doing great.
Sent from my C1604 using Tapatalk
@hsr0 can you think to develop a better kernel with more features on our E DUAL?
now you are a real developer.... hats off...
u.lakhani10 said:
@hsr0 can you think to develop a better kernel with more features on our E DUAL?
Click to expand...
Click to collapse
Building a kernel is slightly different from what is done here, but it is quite simple to add governors and New I/O schedulers
mathewsj114 said:
now you are a real developer.... hats off...
Click to expand...
Click to collapse
Thanks, although there seems to be a hint of sarcasm in your reply
Can i use this AFTER flashing ur cm10 bro @hsr0???
---------- Post added at 06:15 PM ---------- Previous post was at 06:14 PM ----------
Can i use this AFTER flashing ur cm10 bro @hsr0???
hsr0 said:
Building a kernel is slightly different from what is done here, but it is quite simple to add governors and New I/O schedulers
Thanks, although there seems to be a hint of sarcasm in your reply
Click to expand...
Click to collapse
nope... not even a bit of sarcasm...
I mean what I said.. dude there were no good devs here for E... I really appreciate your work..
again.. not a bit of sarcasm..
gbadcool said:
Can i use this AFTER flashing ur cm10 bro @hsr0???
---------- Post added at 06:15 PM ---------- Previous post was at 06:14 PM ----------
Can i use this AFTER flashing ur cm10 bro @hsr0???
Click to expand...
Click to collapse
Sorry No, the kernel and ramdisk used in this boot.img is different from that on CM10, hence you might encounter bootloops.
mathewsj114 said:
nope... not even a bit of sarcasm...
I mean what I said.. dude there were no good devs here for E... I really appreciate your work..
again.. not a bit of sarcasm..
Click to expand...
Click to collapse
Can't install dual recovery on cm10.. Also when i connect my phone in flashmode or fastboot mode flashtool shows drivers need to be installed. However i already had installed the drivers. Also re-installed them
Sent from my Xperia E dual using xda app-developers app
adamant783 said:
Can't install dual recovery on cm10.. Also when i connect my phone in flashmode or fastboot mode flashtool shows drivers need to be installed. However i already had installed the drivers. Also re-installed them
Sent from my Xperia E dual using xda app-developers app
Click to expand...
Click to collapse
This recovery is only for stock, flashing it in cm10 will result in bootloops
Can we install cwm recovery on cm10?
Sent from my Xperia E dual using xda app-developers app
adamant783 said:
Can we install cwm recovery on cm10?
Sent from my Xperia E dual using xda app-developers app
Click to expand...
Click to collapse
If you install CWM recovery/this recovery, only booting into recovery will work, but the normal system startup will result in bootloops.
So i flash this only if you need to go back to your STOCK backup and don't need to run CM for the time being.
hsr0 said:
If you install CWM recovery/this recovery, only booting into recovery will work, but the normal system startup will result in bootloops.
So i flash this only if you need to go back to your STOCK backup and don't need to run CM for the time being.
Click to expand...
Click to collapse
Work great in Stock kernel, but return to CWM only after flashing the OC Kernel
(Guess OC Kernel like CM Kernel anyway)
Can't we remove twrp recovery and install cwm? Or can dual recovery be ported for cm10?
Hit thanks if i helped
adamant783 said:
Can't we remove twrp recovery and install cwm? Or can dual recovery be ported for cm10?
Hit thanks if i helped
Click to expand...
Click to collapse
I'll add the option of dual recovery in the next cm10 release.
Does the cm10 ver 1.0.1 come with dual recovery?
Sent from my Xperia E dual using xda app-developers app
adamant783 said:
Does the cm10 ver 1.0.1 come with dual recovery?
Sent from my Xperia E dual using xda app-developers app
Click to expand...
Click to collapse
Not yet, i'll bring it out in the next release.
Many thank bro @hsr0. I just flash your dualboot into Stock ROM and it works perfect.
So now, dont care about network bug,( of course,we pay time but i love CM10 ROM) to wait you fix that problem. :good:
can anyone confirm this?
can C1504/C1505 users confirm this??
http://forum.xda-developers.com/showthread.php?p=48153659
loveingrup2 said:
can C1504/C1505 users confirm this??
http://forum.xda-developers.com/showthread.php?p=48153659
Click to expand...
Click to collapse
If root method, i'm use VRoot, i work well
I already test it on Xperia L, Live with Walkman, Xperia E Dual, Samsung Galaxy Note GT-N7000, and Samsung Galaxy Tab 3 7.0
But you must disable superuser ( it like SuperSU ) on Apps > All to replace SuperSU.
Remember let that superuser allow SuperSU to update binary and after that you disable superuser, not SuperSU.
After disable superuser, go to SuperSu, find install to /system, and yeah SuperSu work properly
*after allow SuperSU, install binary, dont press yes on delete other superuser cause different model cause bootloop
P/s : sorry if im out of topic, just want share this method, it easy
Good Luck! Sorry my english Bad
Hey,
This is a continuation from jjm34's version of CyanogenMod 10 with Dual SIM with a few bug fixes and changes.
Current Version : v1.1.0a 20/11/2013
Status : Alpha
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* You may have voided your device's warranty.
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. [B]YOU[/B] are choosing to make these modifications on your device
* I absolutely disclaim any responsibility.
*/
Download Links
Xperia E Dual : http://sourceforge.net/projects/nanhu-cm/files/nanhu_ds/1.1.0/
This ROM is completely based off jjm34's CM10(dual) build, hence complete credits to him for his contribution.
However a few modifications have been/are being made to kernel/ROM in order to improve user experience.
The ROM has been personally tested on my C1604 and is fit for essential use.
The is reported to be working on Xperia E single sim versions without any modifications also!
Click to expand...
Click to collapse
Features
Based on CM10 (AOSP 4.1.2)
Stable Overclock to 1.3GHz
Working Sensors(including magnetometer)
Dual SIM implementation
Works on Xperia E Single Sim Also
OTA updates supported
Non-stock CPU governors available
Installation
The ROM is currently in Alpha stage, it suggested that you charge to battery to over 50% and have a backup of your data before flashing this release
Install stock Jellybean firmware (11.3.A.2.1) since the ROM is based off that and hence requires those baseband firmwares.
Boot into recovery.
If you do not possess any recovery, check this thread http://forum.xda-developers.com/showthread.php?t=2505811
Flash the cm-nanhu_ds-ota-{version}.zip
Do a factory reset (data/cache)
(Optional) Flash Google Apps for 10.0.x from here http://goo.im/gapps
Reboot
Initial start up might take a while since the system might be caching up resources
GPL Compliance
Kernel Source : https://github.com/hsr0/android_kernel_sony_msm7x27a
Device Source Files : https://github.com/hsr0/android_device_sony_nanhu_ds
Note : The source is compiled using files from jjm34's source code modification, hence use this repo manifest https://github.com/der-koenig/repo_manifests and replace device and kernel files with the above mentioned.
Issues
Video Encoding Not Working
NOTE : Since this is a community project, it is requested that you report any issue you may find along with logcat/dmesg/last_kmsg logs
Error Reporting
Send a logcat of the phone while rebooting/while the error occurs
Enable Developer Tools -> USB Debugging
Download and extract this debugging toolkit : https://sourceforge.net/projects/nanhu-cm/files/debugging/
Run install.bat and upload the logs here.
Troubleshooting/FAQ
Video playback does not seem to work!
Upgrade to v1.0.1 or higher!
My phone seems to be overheating quite quickly!
This maybe due to the overclock feature and intensive usage, you can reduce the clock speed to improve stability!
Go to Settings -> Perfomance -> Processor -> Max CPU Frequency
Chose any of the given frequencies between 1008 MHz to 1305 MHz (1008 MHz is stock max frequency)
Change the governor to OnDemand/Powersave or Conservative
Does this work on Xperia E Single Sim?
Yes, it has been found to be stable with any major issues as of now!
How do I use the Dual Recovery!
Booting into TWRP
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, press the volume down key a couple of times
You should be in recovery mode with orange notification bar
Booting into CWM
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, wait till it lights off
When notification bars lights up to green, press the volume down key
You should be in recovery mode with orange notification bar
How do I use SmartAssV2 Governor!
Go to Settings -> Perfomance -> Processor
Click CPU Governor
Select SMARTASSV2
Credits
jjm34 for his work on the dual sim implementation
FXP for the initial configurations
CyanogenMod Team for their ROM
CodeAurora for their dual sim implementation
Change Log
v1.0.0a 09/11/2013
Overclock to 1.3GHz
Fixed Magnetometer
v1.0.1a 15/11/2013
Fixed Video Playback issues
Added support for OTA updater
v1.1.0a 20/11/2013
First OTA update
Dual Recovery Support (see Troubleshooting/FAQ #4)
SmartAssV2 Governor added! (see Troubleshooting/FAQ #5)
NOTE: You need to be on v1.0.1 for the OTA update/incremental update patch to work!
good work buddy.. will try it ASAP
download link fixed
Works great on my E dual.
Sent from my Xperia E dual using Tapatalk
---------- Post added at 05:39 PM ---------- Previous post was at 05:16 PM ----------
Video player does not work.
Sent from my Xperia E dual using Tapatalk
Abadguy10 said:
Works great on my E dual.
Sent from my Xperia E dual using Tapatalk
---------- Post added at 05:39 PM ---------- Previous post was at 05:16 PM ----------
Video player does not work.
Sent from my Xperia E dual using Tapatalk
Click to expand...
Click to collapse
yea, it's an issue carried over from the initial release
you can temporarily fix using
Settings, development tools, disable hw overlay(On)
Hello !
My phone is not charging after flashing this ROM. I have a C1605.
Is there a solution for that ?
Hoshar said:
Hello !
My phone is not charging after flashing this ROM. I have a C1605.
Is there a solution for that ?
Click to expand...
Click to collapse
Flash through CWM
Ever make a backup
Good job bro... :good:
Was wondering when CM10 for E dual will be continued with bugs fixed...
Btw, any screenshots please??!
Keep it up :highfive: :good:
realthrash said:
Flash through CWM
Ever make a backup
Click to expand...
Click to collapse
did you clear data and cache after flashing the ROM?
Done flashing, looking good for now, need to sync my google account, searching for latest gapps...
Any ideas?
Never mind...
Everything work great even BBM n hangout2 work well...
Thanks so much bro... :thumbup:
Keep up the good works :thumbup:
realthrash said:
Flash through CWM
Ever make a backup
Click to expand...
Click to collapse
Flashed it through CWM and now it works, thanks man :good:
Flashed it..
The over clock is cool
No network and charging bug till now
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..
Can i use this deodex zip files from here http://forum.xda-developers.com/showthread.php?t=2444015 to this rom or u do have the deodex version???
mathewsj114 said:
Flashed it..
The over clock is cool
No network and charging bug till now
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..
Click to expand...
Click to collapse
Well viper audio works fine for me.
Sent from my Xperia E dual using Tapatalk
mathewsj114 said:
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Click to expand...
Click to collapse
There is some issue with hardware encoding which causes both the issues, there is some issue with memory management and encoding.
I'm looking into it.
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
Click to expand...
Click to collapse
Try clearing data or uninstall and then reinstall, TB shows this error when it does not get root permission in its initial run.
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
Click to expand...
Click to collapse
It's an issue i have experienced in the stock ROM also since ICS builds, it shows a large drop during heavy usage and then rises when idle.
Might be a battery sensor module issue, not sure though, but i doubt it's a bug with the ROM, maybe an issue with the kernel.
[/QUOTE]
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..[/QUOTE]
Good to know that
---
gbadcool said:
Can i use this deodex zip files from here http://forum.xda-developers.com/showthread.php?t=2444015 to this rom or u do have the deodex version???
Click to expand...
Click to collapse
This ROM is different from the version that is deodexed, you have to manually deodex this ROM.
Deodexing is recommended if you wish to modify the ROM, otherwise odexed ROMs have better performance in general
This might help : http://forum.xda-developers.com/showthread.php?t=2374008
---
Hoshar said:
Flashed it through CWM and now it works, thanks man :good:
Click to expand...
Click to collapse
Good to know that it works.
---
Abadguy10 said:
Well viper audio works fine for me.
Sent from my Xperia E dual using Tapatalk
Click to expand...
Click to collapse
Good to know
--
Thanks for the feedback, however i have been slightly busy this week and will possibly be busy for the rest of the week, however i'll try to look into video encoding issue.
Regards
hsr
Can you port this ROM for Xperia Tipo Dual Sim??? I liked very much your r:good:elease!
What about Xperia E single?
hsr0 said:
This ROM is different from the version that is deodexed, you have to manually deodex this ROM.
Deodexing is recommended if you wish to modify the ROM, otherwise odexed ROMs have better performance in general
This might help : http://forum.xda-developers.com/showthread.php?t=2374008
Regards
hsr
Click to expand...
Click to collapse
Thanks for reply, :good:
I think i stick with this without deodex...
TheXperiaE said:
What about Xperia E single?
Click to expand...
Click to collapse
There is fxp
Sent from my Xperia E dual using Tapatalk
gbadcool said:
Done flashing, looking good for now, need to sync my google account, searching for latest gapps...
Any ideas?
Never mind...
Everything work great even BBM n hangout2 work well...
Thanks so much bro... :thumbup:
Keep up the good works :thumbup:
Click to expand...
Click to collapse
OP modified with instructions for GApps
INSTALL CM10 ON XPERIA E SS WITH BUGFIXES
NOTE - UNLOCKED BOOT LOADER IS NEEDED
*NOOB GUIDE*
1. DOWNLOAD @jjm34 ROM: http://sourceforge.net/projects/cmk/files/nanhu/nanhu-CM10DS-0.8.1.36-ota.zip/download
2. PUT IT ON YOUR SD CARD.
3. GO INTO RECOVERY, IF YOU DON'T HAVE RECOVERY FOLLOW GUIDE HERE: http://forum.xda-developers.com/showthread.php?t=2276943
3. DO A WIPE/FACTORY RESET
4. NOW SELECT INSTALL ZIP FROM SDCARD, DEPENDING ON WHEREVER YOU PUT THE FILE, E.G. EXTERNAL OR INTERNAL STORAGE, SELECT THE CORRESPONDING ONE AND FLASH
5. NOW POWER DOWN AND DOWNLOAD THIS KERNEL, PUT IT INTO FASTBOOT FOLDER: https://drive.google.com/file/d/0B73-53ZX-WVRSGxDZFBjNURBdm8/edit?usp=sharing
6. HOLD SHIFT AND RIGHT CLICK INTO THE FASBOOT FOLDER AND SELECT OPEN COMMAND WINDOW HERE
7. IN THE COMMAND WINDOW TYPE: fastboot flash boot boot.img
8. YOU SHOULD NOW HAVE A WORKING ROM WITH MOST BUGFIXES
VIDEO RECORDING IS THE ONLY THING THAT DOES NOT WORK!
THANKS TO @jjm34 FOR THE ROM AND @hsr0 FOR HIS KERNEL, ALL CREDIT GOES TO THEM!
Works Perfect ! Good Job man !
DanielFlorin said:
Works Perfect ! Good Job man !
Click to expand...
Click to collapse
Hit the Thanks Button If I Helped!
Doubt
No network bug detected with this combination?
bg.shishir said:
No network bug detected with this combination?
Click to expand...
Click to collapse
Yes no Network Bug in this Method!
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
smz2014 said:
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
Click to expand...
Click to collapse
Yes Video Recording (Need Fixing) is not going to work, the title clearly says Almost All Bug Fix.
Too busy working on CM11.
smz2014 said:
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
Click to expand...
Click to collapse
Yes Video Recording (Need Fixing) is not going to work, the title clearly says Almost All Bug Fix.
Too busy working on CM11.
can i onerclock it if yes please tell me how ??
harimmedayil1 said:
can i onerclock it if yes please tell me how ??
Click to expand...
Click to collapse
Yes, you can. Just go to Settings > Performance, read the message, if you're OK with it, tap OK. Open Processor, and set the Maximum CPU Frequency to whatever you want. Here's something:
600 Mhz or below: Underclock, will save battery life
1008 Mhz: Normal, like you get in stock ROM.
1036 Mhz or higher: Overclock, will increase performance.
Unfortunate surprise
Dude.. just got the network bug.
Any advice? I really love cyanogen.
Also how is cm11 bugfixing coming along?
bg.shishir said:
Dude.. just got the network bug.
Any advice? I really love cyanogen.
Also how is cm11 bugfixing coming along?
Click to expand...
Click to collapse
Confirmed by a lot of users that use this method that network bug is fixed, if you go into settings --> About Phone and Under Baseband it says unknown then flash latest stock jellybean ftf and do this process again.
Sent from my C1605 using Tapatalk
earlier there wasa thread to overclock upto 1.36 ghz for the xperia E nanhu SS i coudnt find the kernel for that.then i flashed riches kernel my phone didnt even turn on
MY device SONY xperia E
running on xbooost rom
harimmedayil1 said:
earlier there wasa thread to overclock upto 1.36 ghz for the xperia E nanhu SS i coudnt find the kernel for that.then i flashed riches kernel my phone didnt even turn on
MY device SONY xperia E
running on xbooost rom
Click to expand...
Click to collapse
If you're using XboosT, Riches will not work. Riches is only for CM. If you want overclock, install CM10. If you want ICS, flash the XboosT kernel again. I don't think you can have both.
NSDCars5 said:
If you're using XboosT, Riches will not work. Riches is only for CM. If you want overclock, install CM10. If you want ICS, flash the XboosT kernel again. I don't think you can have both.
Click to expand...
Click to collapse
nop i flashe riches when i had cm 10 but after flashing riches ma phone didnt turn on it just vibrates on pushing power button and stays dead
harimmedayil1 said:
nop i flashe riches when i had cm 10 but after flashing riches ma phone didnt turn on it just vibrates on pushing power button and stays dead
Click to expand...
Click to collapse
Ah, you have my issue. Same happens with me. Just flash this boot.img: https://drive.google.com/file/d/0B7...0B73-53ZX-WVRSGxDZFBjNURBdm8/edit?usp=sharing
Not working
Flashed 2 times already. Still getting the network bug after 2 days of use. This is so annoying
I flashed latest stock (11. something ) and then did exactly as you said. I have c1504.
I personally think this has something to do with Viper sound engine. Because few weeks back I had installed hsr's cm and it worked perfectly for 10-15 days. The day I installed viper, that network bug came back. This is only a guess btw. I had viper, vine and instagram installed on my phone this time.
Any suggestions?
thanks using your rom currently
this one is the most stable available rom for xperia E right?
XperiaEss said:
thanks using your rom currently
this one is the most stable available rom for xperia E right?
Click to expand...
Click to collapse
Well, other than stock, yes, it is. And NoZ and XboosT (but both of those are stock-based anyway).
yes,seen those, noz is the ultimate show off rom (I'm not into it)
xboost i wanted to try ,but the instructions were too rough and too many downloads ,if there was like ,two zips i would have tried by now
the unexpected thing i found while using this rom was that it has cwm & twrp .....not sure where i got them but i like it
i want to know how this version is different from jim34 & hsr0 cm10 rom :cyclops:
WHAT IVE DONE IS COMBINE MULTIPLE GUIDES FROM DIFFERENT SOURCES TO ONE ULTIMATE NOOB FRIENDLY GUIDE
IAM NOT RESPONSIBLE FOR YOUR PHONE BRICKING IN ANYWAY , DO THIS AT YOUR OWN RISK ,AND FOR THE PASSION OF CUSTOMIZATION :silly::silly::silly:
IF YOUR DEVICE BOOTLOADER IS NOT UNLOCKABLE THIS THREAD IS NOT FOR YOU
DOWNLOAD THE FOLLOWING :
0) a pair of big balls and join the revolution (pre download)
1) flashtool for xperia http://forum.xda-developers.com/showthread.php?t=920746
2) rootkit xperia http://forum.xda-developers.com/attachment.php?attachmentid=2483944&d=1388428659
3) back up ta https://github.com/devshaft/backup-ta/releases
4) http://fxpblog.co/cyanogenmod/cyanogenmod-11/
5) latest firmware for xperia l (ftf) http://forum.xda-developers.com/xperia-l/general/sony-xperia-l-flashable-ftfs-locked-t2560642
a) first download the xperia c2105 firmware 15.6.1.17 (the version i used to upgrade to kitkat 4.4.4 with.
NOW THE JUICY PART:
a) u need to root your xperia l using rootkit (credit to the dev)
a1) tap on build number many times , then go back to setting open developer mode and enable usb debugging.
a2) proceed to rooting.
b) back up your drm keys using back up ta.
d) now proceed to unlocking your bootloader using flashtool.
di) open flshtool
dii)click on "blu" tab and follow the prompts (do not connect your phone yet)
dii)when requested to enter flash mode press volume down and insert usb to phone now
dii) next you will be prompted to enter fast boot mode , to do this disconnect phone, press volume up and insert usb.
diii) next click unlock , you will be directed to sony website to recieve your unlock bootloader key.
div) go to your email copy code paste in flashtool , click unlock and your done , boot loader unlocked.
e) you will notice bootloop.
e0) discconect phone from computer.
e1) flash the ftf you donwloaded earlier using flashtool.
e2) to do this , copy the ftf firmware to the c/flashtool/firmware folder .
e3) open flash tool , click on the lightning icon , leave it on flash mode click okay ,
e4) your firmware will appear there , make sure u choose the xperia c2105 firmware, leave other options intact and go to next window
e5) chill for files to be prepared then follow the promt window to flash the ftf. once done disconnect phone and restart , will take 5min.
f) root devce again (refer to a1)
1) copy fxp .zip and gapps to your sd card .
g) open flshtool again
g1)click on lighning bolt tab.
g2) choose fastboot .
g3) put phone in fastboot mode and connect.
g4) unzip fxp[latest from link above]
g5) choose flash kernel on flashtool , the scroll to unziped fxp325 and select boot.img to flash
g6) if you cant see it be sure to change image time to .img bottom right of the search window.
g7) when done restart phone and boot to cwm by powering on phone and press the volume down button repeatedly till you c cwm.
g8) wipe data and cache , also dalvik.
g9) flash fxp325 and gapps.
g10 reboot phone and voila your done , WELCOME TO THE 4.4.4 LEAGUE BRAVE WARRIOR.
NEW FINDINGS :
1) You can enable ART , in developer options , no bootloop
Bugs?
Sent from my C2104 using Tapatalk
Very Nice!
Sent from my C2105 using XDA Premium 4 mobile app
i have used it for one week , no bugs on my side , infact its better on power management than stock XL firmware ,, i noticed when phone isnt under heavy usage it even suspends one CPU , this greatly saves power , and it wont make the phone lag , ihave test asphalt 8 , pv2, battle run , dead effect , all good , plus memory issue has been fixed , so it wont show only 2GB ,.. all social apps work .. only thing that isnt included is fm radio , but i use tune in radio for radio..
ON MY SIDE NO BUGS TO REPORT .
Please take off the caps, and the bright colors. There's no way I'm reading it like that. Keep it formal.
Sent from my C2105 using XDA Free mobile app
Noisy Boy said:
i have used it for one week , no bugs on my side , infact its better on power management than stock XL firmware ,, i noticed when phone isnt under heavy usage it even suspends one CPU , this greatly saves power , and it wont make the phone lag , ihave test asphalt 8 , pv2, battle run , dead effect , all good , plus memory issue has been fixed , so it wont show only 2GB ,.. all social apps work .. only thing that isnt included is fm radio , but i use tune in radio for radio..
ON MY SIDE NO BUGS TO REPORT .
Click to expand...
Click to collapse
Bugs?
Re: Edited guide
Joel16 said:
Please take off the caps, and the bright colors. There's no way I'm reading it like that. Keep it formal.
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
I have removed the caps , and included color only where necessary . E.G to warn people in issues of bootloader . is it okay now ?
NO bugs so far
softroid said:
Bugs?
Click to expand...
Click to collapse
NOne , so far , Still testing more apps , but i have tested all the core apps such as , vine , instagram , asphalt , pv2 , music app , GPS , bluetooth , wifi , calling , H+ , Edge ... i can say no bugs unless you find one , .. just follow the steps and you will be good :highfive::highfive::highfive:
Noisy Boy said:
NOne , so far , Still testing more apps , but i have tested all the core apps such as , vine , instagram , asphalt , pv2 , music app , GPS , bluetooth , wifi , calling , H+ , Edge ... i can say no bugs unless you find one , .. just follow the steps and you will be good :highfive::highfive::highfive:
Click to expand...
Click to collapse
Is gps working on this one?!
You said that you've tested gps?
Thanks
Sent from the center of the galaxy
Gps works fine
softroid said:
Bugs?
Click to expand...
Click to collapse
Noisy Boy said:
I have removed the caps , and included color only where necessary . E.G to warn people in issues of bootloader . is it okay now ?
Click to expand...
Click to collapse
THE GPS WORKS FINE , WITH ALL THE GPS DEPENDENCIES WORKING . NO BUG THERE
Actually this is kinda messed up guide.
The easiest one is after unlocking bootloader just flash boot.img from fxp zip and then enter cwm and flash cm. No need to do so many steps as u wrote
Wysłane z mojego C2105 przy użyciu Tapatalka
Noisy Boy said:
THE GPS WORKS FINE , WITH ALL THE GPS DEPENDENCIES WORKING . NO BUG THERE
Click to expand...
Click to collapse
Whoo, why the heck nobody said something that this has been fixed. Then it means we have a fully working kk. Fantastic guys. This made my day! Thanks!
Sent from the center of the galaxy
WHY my method rocks
uremytoy said:
Actually this is kinda messed up guide.
The easiest one is after unlocking bootloader just flash boot.img from fxp zip and then enter cwm and flash cm. No need to do so many steps as u wrote
Wysłane z mojego C2105 przy użyciu Tapatalka
Click to expand...
Click to collapse
my method is safer , precautious , plus u can relock bootloader incase Sony releases cool stock , or u need to relock for warranty purposes .. hence the back up TA part , also NOTE THE TITLE , its for noobs , this is to enable anyone to get kitkat . its detailed down to the last bit , i even explan how icons look like . ... other guides have too many gaps that would leave a noob to custtom ROMS frustrated.
cojocar.andrei said:
Whoo, why the heck nobody said something that this has been fixed. Then it means we have a fully working kk. Fantastic guys. This made my day! Thanks!
Sent from the center of the galaxy
Click to expand...
Click to collapse
welcome :laugh::victory: .... so many people don't know of this, its scattered all over XDA in parts .
U Dinsmore understand me mate. I just wrote how to install cm faster without second time flashing Ftf and rooting cause u don't have to.... U just need to unlock be and u can straight install cm
Wysłane z mojego C2105 przy użyciu Tapatalka
Noisy Boy said:
I have removed the caps , and included color only where necessary . E.G to warn people in issues of bootloader . is it okay now ?
Click to expand...
Click to collapse
Yes but this
DOWNLOAD THE FOLLOWING :
Click to expand...
Click to collapse
and this
WHAT IVE DONE IS COMBINE MULTIPLE GUIDES FROM DIFFERENT SOURCES TO ONE ULTIMATE NOOB FRIENDLY GUIDE
Click to expand...
Click to collapse
Doesn't need to be in caps. There's no need to increase the text size so much either just put it +1 larger than the regular text.
also
IAM NOT RESPONSIBLE FOR YOUR PHONE BRICKING IN ANYWAY , DO THIS AT YOUR OWN RISK ,AND FOR THE PASSION OF CUSTOMIZATION
IF YOUR DEVICE BOOTLOADER IS NOT UNLOCKABLE THIS THREAD IS NOT FOR YOU
Click to expand...
Click to collapse
You can just put this in bold, and red rather than caps. Same with the text size.
same with this
NOW THE JUICY PART:
Click to expand...
Click to collapse
Just put it in bold.
Just trying to help you keep your thread neat and simplistic, cheers
If I have the C2104 version would have no problem with the bandbase? my 3G provider AWS ranks (my country is Chile)
Regards!
Camra quality???
Sent from my C2104 using XDA Premium 4 mobile app
GPS probs.
i still have problems with gps!! when i try to play ingress (which needs GPS + data network) it won't get any coordinates....
someone care to help me out?
So if my phone says that i have 15.3.A.1.14 i do need to download the "- Sony Xperia L C2105 15.3.A.1.14 International (Generic World)" firmware right?