No LTE with Custom Roms? - AT&T Samsung Galaxy S II Skyrocket SGH-I727

I know the skyrocket I727 supports LTE. With stock firmware LTE is not a problem. But when I put any custom ROM it no longer goes to LTE. Is this normal or is their a separate download for an LTE radio in these custom ROMS?

This is not common at all. Check that your apn settings are correct. And you have the recommended radio. What rom are you using?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

I have tried slimbean superlite and a few others. My radio is well I can't seem to find that. My baseband version is i727ucll3 I use CWM touch...When I go into mobile networks is says HSPA:10 and that's it.

Radio or modern is the same thing as baseband. I'm not familiar with the slim bean rom so maybe someone who is can give you a better answer. But in Mobil networks, apn on the superlite rom I have three options with one being lte.
Sent from the short bus

If you're using a rom like PA, CM10, AOKP and probably Slim Bean too.. 4G=LTE.

Do I need to install a new radio? I just ran a speed test and I am getting only about 2 megs down, where before on stock it was like 15 megs down...

falcon26 said:
Do I need to install a new radio? I just ran a speed test and I am getting only about 2 megs down, where before on stock it was like 15 megs down...
Click to expand...
Click to collapse
You have the LTE Apn, correct?

OK don't laugh, but I have no idea what APN stands for where should I like for that? Where would I get one Bear with me here I'm not a complete NOOB I can do some stuff Thanks for the help too...

Settings, more, Mobil networks, access point names(apn)
Sent from the short bus

Ok I'm their but it will not let me choose anything except HSPA:10 when I try to choose LTE it reverts back to the HSPA

falcon26 said:
Ok I'm their but it will not let me choose anything except HSPA:10 when I try to choose LTE it reverts back to the HSPA
Click to expand...
Click to collapse
Can you take a screenshot of this screen.. it'd be easier to see what's up?
Edit: Also, what rom are you on now?

The radio you have is the right one, but I'd re-flash it. See vincoms stickies in the development section. He'll have the radio download and how to do it.
Sent from the short bus

falcon26 said:
Do I need to install a new radio? I just ran a speed test and I am getting only about 2 megs down, where before on stock it was like 15 megs down...
Click to expand...
Click to collapse
Download the ucll3 radio from vicoms sticky and flash it. You don't need to do any wipes and its not going to muck anything up. It'll take care of your problem.
Sent from the short bus

Have you run a speed test lately? As said, many custom ROMs don't have an LTE icon; 4G is LTE, H+ is what AT&T considers "4G" in areas without LTE coverage. Running a speed test is an easy way to tell. If you're getting LTE speeds when your phone says 4G, you're on a ROM that doesn't show an LTE icon.

jd1639 said:
Download the ucll3 radio from vicoms sticky and flash it. You don't need to do any wipes and its not going to muck anything up. It'll take care of your problem.
Sent from the short bus
Click to expand...
Click to collapse
Whoa how did you reply from the past?? On my tapatalk HD app on my note 10.1, it shows your reply date as 12/31/1969. Lol sorry to derail.

Do you have the wrong radio installed? i know that when i had ull3 installed and needed ulck4 it didn't show i had service at all, but it worked still

pre4speed said:
Whoa how did you reply from the past?? On my tapatalk HD app on my note 10.1, it shows your reply date as 12/31/1969. Lol sorry to derail.
Click to expand...
Click to collapse
I'm a blast from the past!
Sent from the long bus, I got mainstreamed

Have you tried opening dialer up, entering *#*#4636#*#*
Go to phone information, scroll down to a drop down menu. Sometimes it'll say WCDMA preferred. Open it and select LTE and your signal should drop and cone back as LTE. After select LTE/GSM and close it.

Are you sure you were on LTE in the first place? AT&T is kinda misleading with their branding and calls HSPA+ "4G" whereas LTE is "4G LTE".

Reply
T.J. Bender said:
Have you run a speed test lately? As said, many custom ROMs don't have an LTE icon; 4G is LTE, H+ is what AT&T considers "4G" in areas without LTE coverage. Running a speed test is an easy way to tell. If you're getting LTE speeds when your phone says 4G, you're on a ROM that doesn't show an LTE icon.
Click to expand...
Click to collapse
I try flashing pacman rom and my phone is displaying the 4g logo. In the pacman rom thread, I saw a snap shot with
the lte symbol. Any ideas?

Related

After rooting i get no H+

after i rooted i never get H+ anymore in my house. i used to be able to but now i dont.
hm?
did you root and load a rom? if so you probably now have HSDPA+HSUPA instead of ATT's locked down hspa+
Do a speed test if are getting over 3 MB/s download and more than 350 kb/s upload then the icon doesn't matter and you are doing fine.
Many have already mentioned you will likely not see the speed til the HSPA+ is fully turned on around March
Sent from my illmatic Inspire 4G / Desire HD
bkeaver said:
did you root and load a rom? if so you probably now have HSDPA+HSUPA instead of ATT's locked down hspa+
Click to expand...
Click to collapse
yeah i rooted and loaded the rom in the development section. id also do a speed test but i have like 2 bars now so i know its gonna suck haha.
Slightly off topic, I have always gotten an H+ at 3-4 bars but my speedtests (24 hours at couple hour increments) I've never gotten above 1.8Mb (1.0 min). In the store the data was flying, and across the street but didn't do a speedtest. Need to go back and try. Anyways I do wonder if H+ is going to be gimmiky until it's much broader release.
It's going to display the h+ anytime you're not connected to edge with the stock phone. When backhaul work is done you should see a difference.
waltah! said:
It's going to display the h+ anytime you're not connected to edge with the stock phone. When backhaul work is done you should see a difference.
Click to expand...
Click to collapse
that isnt what his issue is. read the rom that is posted thread... he isnt going to see the H+ symbol from what I have seen in from that thread...
Do you think its the rom or the radio?
Sent from my Desire HD using XDA App
It is the rom. I think the rom that attn1 posted just doesnt include the H+ icon.
A store rep told me that to see the speed increase I'll need a 4G sim card. Right now I'm getting around 2,997 kbps down & 698 kbps up. He said that Houston is a test market and that 4G went live yesterday. Only problem is that they won't be getting any 4G sim cards till next week.
Does this even sound legit?
mentalcase said:
It is the rom. I think the rom that attn1 posted just doesnt include the H+ icon.
Click to expand...
Click to collapse
Didn't even think that lol
Sent from my Desire HD using XDA App
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
psupernak said:
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
Click to expand...
Click to collapse
Idea...Don't bring up a very very old thread to ask a question that could have been answered by searching.
I got your 10 char right here
sorry dude, im still searching now but to no avail.. Its 2 AM here and im kinda stuck.. Has someone else esperienced this before? i used the GB sense 3.0i.....version 5.01 which is meant to include the H+?
psupernak said:
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
Click to expand...
Click to collapse
psupernak said:
sorry dude, im still searching now but to no avail.. Its 2 AM here and im kinda stuck.. Has someone else esperienced this before? i used the GB sense 3.0i.....version 5.01 which is meant to include the H+?
Click to expand...
Click to collapse
LULZ.
you didnt lose your HSDPA 'capabilities'
you lost your precious H+ icon, which is nothing more than an AT&T cover up to try and trick you into thinking their network is better than others.....its an icon. it means nothing
in the menu, you are only supposed to get a GSM/WCDMA option because thats what the phone runs on.
unless you flashed a different RADIO, one that doesnt like your area, then there is nothing wrong and your HSDPA 'capabilities' are still there. go do a speed test, for petes sake....
search, hell, just READ the titles of a few threads and you will get your answer. it HAS been answered a couple hundred times here and there....
psupernak said:
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
Click to expand...
Click to collapse
This Rom has the Ril in it for the Desire HD radio 26.13.04.19. I use this as my daily Rom with this radio and my phone runs better than stock. H+ was added for aesthetic reasons only.
Read the radio sticky about matching ril/radio combinations.
Sent from my HTC Inspire 4G using XDA App

What rom and kernel combo are you using

With all the development and new roms which combo are you using? I'm currently on nexus mod 4 stock UCLA 3 2.3.6 kernel getting outstanding battery life.
On NexusMOD 4 and was on romracers stockish0.3
just switched to faux010m UV-75 and UC to 1.4. Gonna see how that runs
I tried the faux kernel uv and uc but the silver stock ucla kernel is amazing for me with heavy usage
I would use juggernaught 5.0
Sent from my SGH-T989 using Tapatalk
I'm using Sky-ICS on the 2.6.35.11+ kernal. Pretty decent battery life, although I am not in a LTE area so I'm not sure how that would be on the battery. ROM is fast, smooth, and pretty customizable.
Will of fire said:
I would use juggernaught 5.0
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
says the guy NOT using a skyrocket lol. juggernaut is good, but only 4g kinda sux if he has lte available
icenight89 said:
says the guy NOT using a skyrocket lol. juggernaut is good, but only 4g kinda sux if he has lte available
Click to expand...
Click to collapse
Same thing just tmobile version. That rom works with our phones just have to flash a att kernal
Sent from my SAMSUNG-SGH-I727 using XDA
still missing lte thou
SimPup said:
Same thing just tmobile version. That rom works with our phones just have to flash a att kernal
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Yeah, but
\/
icenight89 said:
still missing lte thou
Click to expand...
Click to collapse
Sent from SKYROCKET
NexusMod 4.0
Faux 010m
icenight89 said:
still missing lte thou
Click to expand...
Click to collapse
go to settings, wireless, mobile networks, choose GPRS/LTE, then in accsess points change apn to ltemobile.apn
odeccacccp said:
go to settings, wireless, mobile networks, choose GPRS/LTE, then in accsess points change apn to ltemobile.apn
Click to expand...
Click to collapse
its STILL missinge LTE, adding an apn won't fix that, the actual rom is missing the support framework
icenight89 said:
its STILL missinge LTE, adding an apn won't fix that, the actual rom is missing the support framework
Click to expand...
Click to collapse
I have that ROM, it's not missing it.
And every single rom for Skyrocket has LTE Support, actually the phone hardware is always there, that I know for sure.
some ROM's don;t even have an option to choose and still applying apn works perfect. On AT&T ROM the icon will say 4G and small LTE under it, on Rogers it will say LTE.
If 4G is working there is no way you can be missing LTE as LTE is 4G just faster.
odeccacccp said:
I have that ROM, it's not missing it.
And every single rom for Skyrocket has LTE Support, actually the phone hardware is always there, that I know for sure.
some ROM's don;t even have an option to choose and still applying apn works perfect. On AT&T ROM the icon will say 4G and small LTE under it, on Rogers it will say LTE.
If 4G is working there is no way you can be missing LTE as LTE is 4G just faster.
Click to expand...
Click to collapse
Actually 4g is HSPA, LTE is a different network.
tomtommy306 said:
Actually 4g is HSPA, LTE is a different network.
Click to expand...
Click to collapse
AT&T uses regular LTE which is just 4G updated it's called 4G-LTE, Canadian network is way more advanced.
http://en.wikipedia.org/wiki/4G
coming back to my original point, if your phone shows 4G sign and you don;t get LTE, two reason's 1) you are not in the range for LTE 2) your apk is wrong. This is tested and retested, just change the apn and get in the LTE range and see the magic.
odeccacccp said:
AT&T uses regular LTE which is just 4G updated it's called 4G-LTE, Canadian network is way more advanced.
http://en.wikipedia.org/wiki/4G
coming back to my original point, if your phone shows 4G sign and you don;t get LTE, two reason's 1) you are not in the range for LTE 2) your apk is wrong. This is tested and retested, just change the apn and get in the LTE range and see the magic.
Click to expand...
Click to collapse
well there u go, becuz I'm on rogers in Canada and LTE is LTE, 4 g is slower. Yes, the LTE radio remains active but the rom is incompatible with the frequencies of Rogers LTE = no LTE. That being said a RAT unlocked radio like kj7 may work, but 1) i highly doubt it, and 2) I never got around to testing this as the UCLA3 modem and kernels combo work great for me
odeccacccp said:
AT&T uses regular LTE which is just 4G updated it's called 4G-LTE, Canadian network is way more advanced.
http://en.wikipedia.org/wiki/4G
coming back to my original point, if your phone shows 4G sign and you don;t get LTE, two reason's 1) you are not in the range for LTE 2) your apk is wrong. This is tested and retested, just change the apn and get in the LTE range and see the magic.
Click to expand...
Click to collapse
Hate to brake it to you, but At&t IS LTE, not just spiced up 4g. Why do you think they have to have an LTE radio to receive it.
PS... Rogers and At&t are together so....
tomtommy306 said:
Hate to brake it to you, but At&t IS LTE, not just spiced up 4g. Why do you think they have to have an LTE radio to receive it.
PS... Rogers and At&t are together so....
Click to expand...
Click to collapse
You just made my night lol
Sent from my SAMSUNG-SGH-I727 using Tapatalk
y do new guys argue so much when they're wrong? lol
Running Unknown RC1 rom and SGS2 Streamline kernel. Usually underclocked and under bolted unless it's my day off and I'm fooling around all day on here
Non-bricked Skyrocket since 2-11-2012
Running sky-pics with faux 009m and gideonx script. So far so good. Battery life is good too, especially with a governor and good settings
Sent from my SAMSUNG-SGH-I727

Lost LTE

I have ICS-SUPERLITE-4.2 on Rogers and i totally lost LTE. I wrote in many existing threads and dev section and no one answered.
I lost LTE, even in areas of full reception, i dont have it, i used stock APN and LTE APN and still dont get it. I do get 4G.
Other on rogers running 4.2 have lte, just less reception so im guessing radio is not the problem. Any idea?
mhx did say he broke lte in 4.1 so maybe you got something from that. im flashing now and ill see how it goies
well im on 4.2 so its supposed to be fixed
I was having lte issues on 4.2 aswell
Sent from my SAMSUNG-SGH-I727 using xda premium
finally got an good answer from another thread...wokred for me instantly
mattymon said:
LTE works fine. Just make sure it says ltemobile.apn instead of rogers-core. If it still doesnt work then go int the phones menu *#2263# and select option 4. After that go back into the menu again and select 1 for automatic.
Click to expand...
Click to collapse
I've had to use the *#2263# option to get LTE on every ICS ROM I have tried so far, works great but sometimes I have had to redo it after the 2nd and 3rd reboot for it to take...
Another solution is after you flash an ICS ROM is to have patience , if you wait 5 minutes or so after flashing, before even touching\unlocking the screen, then most of the time everything settles in nicely on its own.
if ur using rogers with the ics leaks, there's several issues. Call id and lack of lte being one of them. This issue is present with all of them, it is an unstable leal after all. i believe lack of lte unless near a strong connection is due to uclca4 issues.
well after doing what i wrote 2 posts above, i have no issues with phone except for reboot/power off hang, i also get the occasional 2-3 second lag but its quite rare. Besides, im very haapy with rom, battery life is much better than GB
no lte after ics leak
I've the same issue with AT&T in Miami which has a strong LTE network. LTE worked great with GB. After installing the ICS leak all I get is HSPA:11. When I go into *#2263# it says RAT Selection option is restricted. Anyone have a solution?
daviebeach said:
I've the same issue with AT&T in Miami which has a strong LTE network. LTE worked great with GB. After installing the ICS leak all I get is HSPA:11. When I go into *#2263# it says RAT Selection option is restricted. Anyone have a solution?
Click to expand...
Click to collapse
Probably don't have the correct apn. apn needs to be set to pta in order to get lte.
daviebeach said:
I've the same issue with AT&T in Miami which has a strong LTE network. LTE worked great with GB. After installing the ICS leak all I get is HSPA:11. When I go into *#2263# it says RAT Selection option is restricted. Anyone have a solution?
Click to expand...
Click to collapse
Ditto - well actually I AM seeing LTE, but a drastically reduced data rates. Does not seem to matter what ROM, or Kernel or how many times I have re-flashed or re-flashed just the ICS Radio, I get roughly HALF of what I was seeing on GB. Ugh. I don't WANNA go back to Gingerbread. I just want perfection. Is that too much to ask for?
beaups said:
Probably don't have the correct apn. apn needs to be set to pta in order to get lte.
Click to expand...
Click to collapse
It's not the APN, at least in my case. It just crappy reception, and it happened exactly when I flashed ICS, and has been like that ever since. This in spite of re-flashing the Olin leak, reflashing the the radio, etc. It really irks me, and I do NOT want to go back to GB
daviebeach said:
I've the same issue with AT&T in Miami which has a strong LTE network. LTE worked great with GB. After installing the ICS leak all I get is HSPA:11. When I go into *#2263# it says RAT Selection option is restricted. Anyone have a solution?
Click to expand...
Click to collapse
reflash the radio then you should be ok.
apn is set to PTA so not sure what to try next.
Sent from my SAMSUNG-SGH-I727 using xda premium
Sorry. Missed reflashing the radio. haven't rooted since installing I've leak. I'll try that next. Thanks
Sent from my SAMSUNG-SGH-I727 using xda premium
Ha! ICS leak. Gotta love auto correct.
Sent from my SAMSUNG-SGH-I727 using xda premium
RAT Selection option is restricted
Just flashed SeanZ ICS 4.2A-7 ROM and i727UCAL4 modem. I'm still getting "RAT Selection option is restricted". There is nothing else on that screen. This has been 3 different radios now and I cannot get a screen that allows me to select the radio band.
Would flashing a different kernel work? Any other ideas?

Do custom ROMs allow for 42mbps?

Do custom ROMs limit the HSPA speed of our phone? Is there some network check where if you're not running on T-Mobile's ROM, you won't be able to access the full speed HSPA+ 42mbps network?
rom won't affect that
have seen a lot of posts with folks getting plus 20mb in the 42mb areas--wish I lived in one--
Do you think the buil.prop settings have anything to do with it?
I remember getting 15mbps a few months back from my home, now the fastest I can get is around 5 :/
sounds like something changed, what do you get in other areas compared to before
some roms don't do as well as others with some folks. but, I never had a rom make that kind of difference.
don't know about buildprop--I doubt it
try the last rom you were on with good speeds. also, maybe the latest radio
I haven't been able to get high speeds like that anywhere really.
What I've noticed is that since switching from the stock ROM, my indicator switches frequently from "H" to "3G". It'll switch back and fourth every 5-10 seconds when I'm using data. This happens with CM9 and CM10 and the modified Sense ROM that I'm running now. I live in an area with excellent 4G coverage and I don't understand why this switching is occurring now when it wasn't back on the stock ROM (and I know the stock ROM had separate indicators for 4G/H and 3G). It doesn't make any sense to me.
the switching is common for a lot of people and is addressed on several threads
if your hboot is under .13 you can flash a newer radio
gotta call it a nite
I don't know if the following setting remains after rooting and installing a custom ROM but check it out and test the different settings:
Settings>Mobile network>Network mode>WCDMA only versus GSM/WCDMA auto
Are you in an HSPA+42 area? T-Mobile only has that in a few markets..
Sent from my SGH-T999
angr1112 said:
I don't know if the following setting remains after rooting and installing a custom ROM but check it out and test the different settings:
Settings>Mobile network>Network mode>WCDMA only versus GSM/WCDMA auto
Click to expand...
Click to collapse
I like my phone switching to edge when HSPA signal is weak because then I still get service and it doesn't kill my battery life. I don't think this would matter because 3G and 4G are on the same bands :/ Which is why I don't understand why it switches....
joshnichols189 said:
Are you in an HSPA+42 area? T-Mobile only has that in a few markets..
Sent from my SGH-T999
Click to expand...
Click to collapse
I am in the Salt Lake City area, which does have HSPA+42
I'll see what I can do with radio flashing. If I get something to work I'll post a guide on it.
I did some tweaks on my phone and saw positive results, I posted a guide for others here.

[Q] Flashing T-Mobile radio onto at&t skyrocket

I have a rooted and unlocked at&t skyrocket on jellybean 4.1.2 with very slow speeds, so I tried flashing the radios UCMC1 and UXUMA7 through cwm and nothing has changed. After messing with the APN settings a little my data is no longer working. It shows the bars but I can't get a connection.
I flashed the radio UVLI1 in hopes that I would get lucky but that caused my bars to go away to be replaced by a slashed circle. I flashed back to UCMC1 which is showing the bars, but still no data connection. I have broken my back googling and searching forums on this matter but I can't seem to figure this out. Any help please?
http://forum.xda-developers.com/showthread.php?t=2349914
Don't double post
I think UCMC1 and UXUMA7 are ATT and Rogers radios respectively. UVLI1 is the T-Mobile SGS2 ICS radio, which may not work on your JellyBean rom.
Try UVMC6, which is the radio for T-Mobile's SGS2 Jelly Bean update. You can find it here:
http://forum.xda-developers.com/showthread.php?t=1895400
Results can never be guaranteed, but this is the radio I use, and it has worked fine on every single rom I've tried, Touchwiz or AOSP, even in areas w/o the 1900Mhz refarm.
Can I flash the radio change w/out having my phone rooted?
Rissa82 said:
Can I flash the radio change w/out having my phone rooted?
Click to expand...
Click to collapse
Your phone must have a custom recovery to flash radio files...
It has twrp... that counts right? It doesn't need to be rooted, does it? I'm a computer nerd... phones aren't my thing. Give a girl a break, lol.
Rissa82 said:
It has twrp... that counts right? It doesn't need to be rooted, does it? I'm a computer nerd... phones aren't my thing. Give a girl a break, lol.
Click to expand...
Click to collapse
Yes ... TWRP or CWM are fine...
Rooting is something different, but for radio flash you have enough...
mahanddeem said:
Yes ... TWRP or CWM are fine...
Rooting is something different, but for radio flash you have enough...
Click to expand...
Click to collapse
Would you mind telling me how I flash it or point me to a thread that will walk me through it quickly? Please & thank you!
---------- Post added at 10:25 PM ---------- Previous post was at 10:15 PM ----------
Nevermind! I think I figured it out!
If I have a AT&T skyrocket and have a T-Mobile sim, should I use this radio? Or just stick with the UX, I am currently running?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
DSDONE said:
If I have a AT&T skyrocket and have a T-Mobile sim, should I use this radio? Or just stick with the UX, I am currently running?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
It depends on what you observe using either of these..
Try them one by another and see which one is better (UCMC1 vs UX radio) in signal and data speeds ... Personally I couldn't find any difference in my location ... Both gave me the exact same signal and data speeds (TM LTE).
mahanddeem said:
It depends on what you observe using either of these..
Try them one by another and see which one is better (UCMC1 vs UX radio) in signal and data speeds ... Personally I couldn't find any difference in my location ... Both gave me the exact same signal and data speeds (TM LTE).
Click to expand...
Click to collapse
The UX gave me faster data speeds. Call clarity is about the same. I see 4G more than with the UC radio... I was wondering about the T-Mobile radio
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
T-Mobile radios would give you the ability to connect to T-Mobile 3G using AWS bands 1700/2100 Mhz Band4...And no LTE (or 4G) of course since the Hercules and Blaze (or the note one from TM) devices have no LTE radio chip...
If you live in an area in which T-Mobile deployed their new LTE(and most likely they already refarmed the PCS 1900 band), use UCMC1 or the UXMA7 radio,whichever you find better...Setting the apn to fast.t-mobile.com is essential for sure to get the service...
If you live in an area that T-Mobile is still at their 3G service (AWS bands for HSPA+) use the newest blaze JB radio...
Edit : when you say faster data speeds UX vs UC , any speed vs speed measurement you can share ? probably I didn't give each radio enough testing and jumped to conclude that they have same data speeds !
:good:
mahanddeem said:
It depends on what you observe using either of these..
Try them one by another and see which one is better (UCMC1 vs UX radio) in signal and data speeds ... Personally I couldn't find any difference in my location ... Both gave me the exact same signal and data speeds (TM LTE).
Click to expand...
Click to collapse

Categories

Resources