Related
after i rooted i never get H+ anymore in my house. i used to be able to but now i dont.
hm?
did you root and load a rom? if so you probably now have HSDPA+HSUPA instead of ATT's locked down hspa+
Do a speed test if are getting over 3 MB/s download and more than 350 kb/s upload then the icon doesn't matter and you are doing fine.
Many have already mentioned you will likely not see the speed til the HSPA+ is fully turned on around March
Sent from my illmatic Inspire 4G / Desire HD
bkeaver said:
did you root and load a rom? if so you probably now have HSDPA+HSUPA instead of ATT's locked down hspa+
Click to expand...
Click to collapse
yeah i rooted and loaded the rom in the development section. id also do a speed test but i have like 2 bars now so i know its gonna suck haha.
Slightly off topic, I have always gotten an H+ at 3-4 bars but my speedtests (24 hours at couple hour increments) I've never gotten above 1.8Mb (1.0 min). In the store the data was flying, and across the street but didn't do a speedtest. Need to go back and try. Anyways I do wonder if H+ is going to be gimmiky until it's much broader release.
It's going to display the h+ anytime you're not connected to edge with the stock phone. When backhaul work is done you should see a difference.
waltah! said:
It's going to display the h+ anytime you're not connected to edge with the stock phone. When backhaul work is done you should see a difference.
Click to expand...
Click to collapse
that isnt what his issue is. read the rom that is posted thread... he isnt going to see the H+ symbol from what I have seen in from that thread...
Do you think its the rom or the radio?
Sent from my Desire HD using XDA App
It is the rom. I think the rom that attn1 posted just doesnt include the H+ icon.
A store rep told me that to see the speed increase I'll need a 4G sim card. Right now I'm getting around 2,997 kbps down & 698 kbps up. He said that Houston is a test market and that 4G went live yesterday. Only problem is that they won't be getting any 4G sim cards till next week.
Does this even sound legit?
mentalcase said:
It is the rom. I think the rom that attn1 posted just doesnt include the H+ icon.
Click to expand...
Click to collapse
Didn't even think that lol
Sent from my Desire HD using XDA App
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
psupernak said:
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
Click to expand...
Click to collapse
Idea...Don't bring up a very very old thread to ask a question that could have been answered by searching.
I got your 10 char right here
sorry dude, im still searching now but to no avail.. Its 2 AM here and im kinda stuck.. Has someone else esperienced this before? i used the GB sense 3.0i.....version 5.01 which is meant to include the H+?
psupernak said:
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
Click to expand...
Click to collapse
psupernak said:
sorry dude, im still searching now but to no avail.. Its 2 AM here and im kinda stuck.. Has someone else esperienced this before? i used the GB sense 3.0i.....version 5.01 which is meant to include the H+?
Click to expand...
Click to collapse
LULZ.
you didnt lose your HSDPA 'capabilities'
you lost your precious H+ icon, which is nothing more than an AT&T cover up to try and trick you into thinking their network is better than others.....its an icon. it means nothing
in the menu, you are only supposed to get a GSM/WCDMA option because thats what the phone runs on.
unless you flashed a different RADIO, one that doesnt like your area, then there is nothing wrong and your HSDPA 'capabilities' are still there. go do a speed test, for petes sake....
search, hell, just READ the titles of a few threads and you will get your answer. it HAS been answered a couple hundred times here and there....
psupernak said:
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
Click to expand...
Click to collapse
This Rom has the Ril in it for the Desire HD radio 26.13.04.19. I use this as my daily Rom with this radio and my phone runs better than stock. H+ was added for aesthetic reasons only.
Read the radio sticky about matching ril/radio combinations.
Sent from my HTC Inspire 4G using XDA App
I seem to be having an issue with my data and am trying to narrow down the reasons for my problem. The issue is I CANNOT use HSUPA (H) for data, I always get a connection timed out issue. I put the phone in 2G GSM mode only and have data working, but of course I was spoiled with better speed I can't stand it.
My question is if AT&T could be doing upgrades to the towers in my area, will that affect my speeds, or is something broken internally in my phone. When I select WCDMA mode, it takes FOREVER for it to connect and says searching for a long time but does connect or displays (H) with 3/4 bars of signal. My friend has an unrooted captivate on 3G and has no issue with data. Does anyone know the cause of this.
I have tried a few different modems (jl3, jk4, kp1....) all the same and have tried 2 different OS's with same data timed out issues while trying to use (H). I am currently in the process of flashing back to stock to see if that will resolve the issue. Thank you for your time guys.
Thanontos said:
I seem to be having an issue with my data and am trying to narrow down the reasons for my problem. The issue is I CANNOT use HSUPA (H) for data, I always get a connection timed out issue. I put the phone in 2G GSM mode only and have data working, but of course I was spoiled with better speed I can't stand it.
My question is if AT&T could be doing upgrades to the towers in my area, will that affect my speeds, or is something broken internally in my phone. When I select WCDMA mode, it takes FOREVER for it to connect and says searching for a long time but does connect or displays (H) with 3/4 bars of signal. My friend has an unrooted captivate on 3G and has no issue with data. Does anyone know the cause of this.
I have tried a few different modems (jl3, jk4, kp1....) all the same and have tried 2 different OS's with same data timed out issues while trying to use (H). I am currently in the process of flashing back to stock to see if that will resolve the issue. Thank you for your time guys.
Click to expand...
Click to collapse
H doesn't necessary mean HSUPA. It simply means HSPA (HSDPA only or HSDPA and HSUPA). You didn't mention anything about your firmware but I guess you are experiment with non-Captivate firmware and modem combination trying to get HDUPA working. From what you described, it seems your current firmware and modem combinations lacks 850MHz support for 3G (most European firmwares lacks 850Mhz) and your local tower happens to use 850MHz, not 1900Mhz. Just a guess.
Make sure you have the modern set to proper frequency (WCDMA 850 or 1900) for your area. The modem thread can tell you all about how to do it.
Sent from my SAMSUNG-SGH-I897 using XDA App
Sorry guys, I guess that was an important part I forgot. I was running Andromeda and thought the same so tried Cognition 4.1.1. Also after going to stock 2.1 I still have the data issue. I can connect to wifi just fine, but no using ATT data will work.
I called customer service and walked through the steps as usual and after some looking into my area, he said there were 3 towers reporting severely degraded. It just sucks seeing my friends phones working with no issues. He said that repairs are stated to be finished sometime in the next few days and to call back later in the week if the problem persists.
Looks like you tried both i897ROM and non-i897 ROM, so it's not firmware related.
Did you try to put someone else's SIM into ur captivate? How about some other devices in ur area?
amtrakcn said:
Looks like you tried both i897ROM and non-i897 ROM, so it's not firmware related.
Did you try to put someone else's SIM into ur captivate? How about some other devices in ur area?
Click to expand...
Click to collapse
I didn't think about trying my friends sim card. I will test tomorrow morning. Ty for the idea to isolate the problem to my phone!
umm not really related to your phone. but im suggesting its the tower upgrades getting them ready for 4G that is causing your phone to act up. i have a HD2 and we have 3G down here. but since early march i get nothing but EDGE. what happens in the month march? AT&T will be launching 4G in selected markets. it was confirmed once i was talking to a AT&T tech. so im just waiting to see what happens in the end of this month.
NOTE: it could also be your sim card having problems. AT&T replaced mine thinking it was a problem with the sim card since i have a AT&T native W350 and i was getting the same problems. call them up again and ask to talk to a tech and tell them your having a problem with your sim card. they will set you up a appointment at a corporate store. free of charge.
I did not think that the Captivate's hardware was capable of HSUPA?
Is it?
bobapunk said:
I did not think that the Captivate's hardware was capable of HSUPA?
Is it?
Click to expand...
Click to collapse
there is a thread on how enabling HSUPA on the captivate. so if we can enable it im sure its capable.
heres the link if you want to read up on How to enable HSUPA on the Samsung Captivate
bobapunk said:
I did not think that the Captivate's hardware was capable of HSUPA?
Is it?
Click to expand...
Click to collapse
it is capable but att blocks it to save bandwidth
hmm,
That thread has not been updated for a long time...
What would happen if I flashed that i9000 modem with a KB1 based Kernel?
sal2708 said:
there is a thread on how enabling HSUPA on the captivate. so if we can enable it im sure its capable.
heres the link if you want to read up on How to enable HSUPA on the Samsung Captivate
Click to expand...
Click to collapse
bobapunk said:
What would happen if I flashed that i9000 modem with a KB1 based Kernel?
Click to expand...
Click to collapse
you would have data, but no voice
Sorry for nor replying sooner. My 3G data seems to be working again. My lack of in depth knowledge is why I put the hsupa above when my phone displayed H I didn't know what to call it.
It must have been tower upgrades. I didn't restart my phone and left it on the charger overnight and the next morning I had no issues. I did a reboot of the phone as a test and connected with data with no issue. Too bad as I was close to getting a replacement, though it would suck and be my luck to get one with other issues. Mine is a 1007 and works perfect (other than the obvious GPS.)
Sent from my SAMSUNG-SGH-I897 using XDA App
Pirateghost said:
you would have data, but no voice
Click to expand...
Click to collapse
That is what I thought, thanks!
Just checking to see if anyone else with an Inspire on AT&T has experienced a signal dropoff in the last two or three days. One day I'm pegged at 4 bars WCDMA, now I can't seem to get out of GPRS/Edge. Seems it coincides with the rollout of the update. Anyone else getting crappy reception in the last few days?
No good reception
Sent from my Desire HD using XDA Premium App
Reception is all right for could always be better, still waiting for AT&T to get the 4g ball rolling
Folks, I'm looking for those of you who have had LOSS of signal in the last week. Please no "mine sucks" or "mine is ok" kind of posts, i only want to hear from those of you who have had a change.
Does anyone know how to check the status of AT&T's cell towers? Is there a website that will show where they are and what their operational condition is?
You can call att and tell them where you are. They will give you information on the towers in your area.
Sent from my HTC Desire HD using XDA Premium App
Signal is crappy, but hasn't changed in the last few days. You should call AT&T and check with them
Well, just as I was about to call AT&T to find out what the heck might be going on, I now see my signal is very strong again, but with UMTS as the network type, though I'm showing 3G in my notification bar.
So, is UMTS the new 4G network and they were just changing the tower over the past few days?
They have been updating towers all over...So to answer your original question, yes I have experienced some bad signal at times, but has returned to a good signal after they finished updating whatever they were working on....
WC
maybe this explains my many dropped calls in the last few days..
Wild Child said:
They have been updating towers all over...So to answer your original question, yes I have experienced some bad signal at times, but has returned to a good signal after they finished updating whatever they were working on....
WC
Click to expand...
Click to collapse
What are you showing for network type?
Actually it depends on where Im at in my house...i can move 15 ft and itll pick up an Edge signal....then switch to H+,which is still just 3G for now until LTE network is up and running...Ive only seen 3G once or twice since Ive had the phone...Also just a side note...Im on an unrooted, untampered with 1.84 ROM...Based on your posts, your rooted and using a custom ROM, issue may not be the phone or the towers, may be the ROM your using,unfortunately with the way ATT provisioned this software...you may have issues with certain things using custom ROMS....
WC
Wild Child said:
Actually it depends on where Im at in my house...i can move 15 ft and itll pick up an Edge signal....then switch to H+,which is still just 3G for now until LTE network is up and running...Ive only seen 3G once or twice since Ive had the phone...Also just a side note...Im on an unrooted, untampered with 1.84 ROM...Based on your posts, your rooted and using a custom ROM, issue may not be the phone or the towers, may be the ROM your using,unfortunately with the way ATT provisioned this software...you may have issues with certain things using custom ROMS....
WC
Click to expand...
Click to collapse
I doubt that using the Custom Roms are the main issue. Many of the custom roms are using Stock Kernals and Radios. <- those are the two main contributing factors to cell strength and battery life.
I run MIUI on stock kernal now, with the new ATT Radio .26.06.06.30_M and have no issues. Denver CO Area and run full bars or -70 to -87 dcb at almost all times. Great download speeds.
Incorrect to a point....if provisioning isnt correct in the rom then there will be issues, att is trying to be slick in a lot of ways these days...
xKrisx said:
I doubt that using the Custom Roms are the main issue. Many of the custom roms are using Stock Kernals and Radios. <- those are the two main contributing factors to cell strength and battery life.
I run MIUI on stock kernal now, with the new ATT Radio .26.06.06.30_M and have no issues. Denver CO Area and run full bars or -70 to -87 dcb at almost all times. Great download speeds.
Click to expand...
Click to collapse
When i use Stock roms my signal is steady on H+ n a lil bit on Edge but mostly on H+.
On custom roms i stay on Edge.. H is rare or just dont stick
n yes im using the stock kernal n radio
Update: turns out they were working on the tower(s) in my area. Signal back to normal. Thanks for everyone's feedback.
this happened to me last month, and now today is happening again lol. seems like they are working on towers a lot recently in my area. if i go to another city i get full bar H constantly...oh wells hopefully they will finish all the tower work soon.
I know the skyrocket I727 supports LTE. With stock firmware LTE is not a problem. But when I put any custom ROM it no longer goes to LTE. Is this normal or is their a separate download for an LTE radio in these custom ROMS?
This is not common at all. Check that your apn settings are correct. And you have the recommended radio. What rom are you using?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I have tried slimbean superlite and a few others. My radio is well I can't seem to find that. My baseband version is i727ucll3 I use CWM touch...When I go into mobile networks is says HSPA:10 and that's it.
Radio or modern is the same thing as baseband. I'm not familiar with the slim bean rom so maybe someone who is can give you a better answer. But in Mobil networks, apn on the superlite rom I have three options with one being lte.
Sent from the short bus
If you're using a rom like PA, CM10, AOKP and probably Slim Bean too.. 4G=LTE.
Do I need to install a new radio? I just ran a speed test and I am getting only about 2 megs down, where before on stock it was like 15 megs down...
falcon26 said:
Do I need to install a new radio? I just ran a speed test and I am getting only about 2 megs down, where before on stock it was like 15 megs down...
Click to expand...
Click to collapse
You have the LTE Apn, correct?
OK don't laugh, but I have no idea what APN stands for where should I like for that? Where would I get one Bear with me here I'm not a complete NOOB I can do some stuff Thanks for the help too...
Settings, more, Mobil networks, access point names(apn)
Sent from the short bus
Ok I'm their but it will not let me choose anything except HSPA:10 when I try to choose LTE it reverts back to the HSPA
falcon26 said:
Ok I'm their but it will not let me choose anything except HSPA:10 when I try to choose LTE it reverts back to the HSPA
Click to expand...
Click to collapse
Can you take a screenshot of this screen.. it'd be easier to see what's up?
Edit: Also, what rom are you on now?
The radio you have is the right one, but I'd re-flash it. See vincoms stickies in the development section. He'll have the radio download and how to do it.
Sent from the short bus
falcon26 said:
Do I need to install a new radio? I just ran a speed test and I am getting only about 2 megs down, where before on stock it was like 15 megs down...
Click to expand...
Click to collapse
Download the ucll3 radio from vicoms sticky and flash it. You don't need to do any wipes and its not going to muck anything up. It'll take care of your problem.
Sent from the short bus
Have you run a speed test lately? As said, many custom ROMs don't have an LTE icon; 4G is LTE, H+ is what AT&T considers "4G" in areas without LTE coverage. Running a speed test is an easy way to tell. If you're getting LTE speeds when your phone says 4G, you're on a ROM that doesn't show an LTE icon.
jd1639 said:
Download the ucll3 radio from vicoms sticky and flash it. You don't need to do any wipes and its not going to muck anything up. It'll take care of your problem.
Sent from the short bus
Click to expand...
Click to collapse
Whoa how did you reply from the past?? On my tapatalk HD app on my note 10.1, it shows your reply date as 12/31/1969. Lol sorry to derail.
Do you have the wrong radio installed? i know that when i had ull3 installed and needed ulck4 it didn't show i had service at all, but it worked still
pre4speed said:
Whoa how did you reply from the past?? On my tapatalk HD app on my note 10.1, it shows your reply date as 12/31/1969. Lol sorry to derail.
Click to expand...
Click to collapse
I'm a blast from the past!
Sent from the long bus, I got mainstreamed
Have you tried opening dialer up, entering *#*#4636#*#*
Go to phone information, scroll down to a drop down menu. Sometimes it'll say WCDMA preferred. Open it and select LTE and your signal should drop and cone back as LTE. After select LTE/GSM and close it.
Are you sure you were on LTE in the first place? AT&T is kinda misleading with their branding and calls HSPA+ "4G" whereas LTE is "4G LTE".
Reply
T.J. Bender said:
Have you run a speed test lately? As said, many custom ROMs don't have an LTE icon; 4G is LTE, H+ is what AT&T considers "4G" in areas without LTE coverage. Running a speed test is an easy way to tell. If you're getting LTE speeds when your phone says 4G, you're on a ROM that doesn't show an LTE icon.
Click to expand...
Click to collapse
I try flashing pacman rom and my phone is displaying the 4g logo. In the pacman rom thread, I saw a snap shot with
the lte symbol. Any ideas?
AT&T customer, midwest United States here. I live in a fringe area, but have always been able to get reception.... until I rooted and started running custom ROMS. It seems some ROMS, for whatever reason, get better radio reception than others.
I tried Viper, and while it was the best for reception, there were a lot of things that gave me trouble and I couldnt live with.
The CM ROMS wont even think about getting reception for me, unless the mobile data is turned on, and then are very erratic. I leave the data turned off when at home due to it always looking and searching and killing my battery. Well, that, and I always use wifi at home. I even tried the newer 3.18 AT&T radio, but it didnt help
Any suggestions as to a ROM that is known for reception? Or a specific AT&T Radio that is better for reception? While I knew different ROMS had different good/bad points... I didnt know the reception was on of those things.
Thanks
SilverFox66 said:
AT&T customer, midwest United States here. I live in a fringe area, but have always been able to get reception.... until I rooted and started running custom ROMS. It seems some ROMS, for whatever reason, get better radio reception than others.
I tried Viper, and while it was the best for reception, there were a lot of things that gave me trouble and I couldnt live with.
The CM ROMS wont even think about getting reception for me, unless the mobile data is turned on, and then are very erratic. I leave the data turned off when at home due to it always looking and searching and killing my battery. Well, that, and I always use wifi at home. I even tried the newer 3.18 AT&T radio, but it didnt help
Any suggestions as to a ROM that is known for reception? Or a specific AT&T Radio that is better for reception? While I knew different ROMS had different good/bad points... I didnt know the reception was on of those things.
Thanks
Click to expand...
Click to collapse
Most roms don't touch the radio firmware flash one after another and see what works best for your area
Sent from my HTC One X using xda app-developers app
31ken31 said:
Most roms don't touch the radio firmware flash one after another and see what works best for your area
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
There sure is a big difference for some reason, with me anyway. The only 2 radios I have found in the Radio thread for AT&T without the RIL (senseless ROMS) is the 2.20 and 3.18 radios. I have bounced back and forth between them, and not seen any difference to speak of. The 3.18 seems to be the more erratic of the 2, for me anyway
SilverFox66 said:
AT&T customer, midwest United States here. I live in a fringe area, but have always been able to get reception.... until I rooted and started running custom ROMS. It seems some ROMS, for whatever reason, get better radio reception than others.
I tried Viper, and while it was the best for reception, there were a lot of things that gave me trouble and I couldnt live with.
The CM ROMS wont even think about getting reception for me, unless the mobile data is turned on, and then are very erratic. I leave the data turned off when at home due to it always looking and searching and killing my battery. Well, that, and I always use wifi at home. I even tried the newer 3.18 AT&T radio, but it didnt help
Any suggestions as to a ROM that is known for reception? Or a specific AT&T Radio that is better for reception? While I knew different ROMS had different good/bad points... I didnt know the reception was on of those things.
Thanks
Click to expand...
Click to collapse
My advice would be to try a different radio until you get one that works for you. I work out of state so I have to change settings to wcdma only to make them work in the area. I use the 3.18 radios on both CM and Sense because they work best in my home area. Viper is based on 3.17.661.2 so AT&T 2.20 may be the best option to try.
I use 2.41 seems 80% of the others I've tried plain suck in my area
Sent from my HTC One X using xda app-developers app
When flashing radios for CM, also be sure that you are flashing the ones designated strictly for CM as the radio fw is kept in another partition than sense. I've never had an issue finding a radio that works for me. They don't all work well but at least 1 always does. When looking for the best radio, I download them all, test them one at a time, marking the signal strength and speedtest results for each and then flash back to the radio that gave me the best results.
31ken31 said:
I use 2.41 seems 80% of the others I've tried plain suck in my area
Click to expand...
Click to collapse
Isnt that for a sense based ROM? I havent seen 2.41 listed for anything other than a sense ROM
Venomtester said:
My advice would be to try a different radio until you get one that works for you. I work out of state so I have to change settings to wcdma only to make them work in the area. I use the 3.18 radios on both CM and Sense because they work best in my home area. Viper is based on 3.17.661.2 so AT&T 2.20 may be the best option to try.
Click to expand...
Click to collapse
Yeah, changing to WCDMA helped a little, but not much
exad said:
When flashing radios for CM, also be sure that you are flashing the ones designated strictly for CM as the radio fw is kept in another partition than sense. I've never had an issue finding a radio that works for me. They don't all work well but at least 1 always does. When looking for the best radio, I download them all, test them one at a time, marking the signal strength and speedtest results for each and then flash back to the radio that gave me the best results.
Click to expand...
Click to collapse
Im getting the radios out of the radio thread here on XDA. I am d/l the radios in the lower section, for CM. I didnt try a different radio when using Viper, because it was useless seeing as I had so many other issues. I wasnt aware I could use Vodaphone or Telstra radios, on AT&T. I had only tried the 2 AT&T radios. My bad, I will try the others.thanks for the info guys. The speed tests are a moot point for me. As I said, i am in a fringe area. I cant judge anything based on data speed, and leave data turned off most of the time. Im not worried about data speed, or trying to fix anything in that area. Im trying to get my phone to get good enough reception to make/receive calls dependably and send/receive texts dependably. Sorry if there was some confusion over this.
Honestly, I would have stuck with Viper, but my wifi wouldnt work, and I couldnt even get my contacts and calendar imported from my Google account. In fact, there wasnt even a Sync option for contacts. So that was a no go.
Thanks again
The 2.41 he mentioned is not a ROM mate it's a radio.
Sent from my One XL using XDA Premium
timmaaa said:
The 2.41 he mentioned is not a ROM mate it's a radio.
Sent from my One XL using XDA Premium
Click to expand...
Click to collapse
yeah, I left out the "for"... as in "for a sense based ROM". Sorry, I went back and edited it
Ahh OK no worries
Sent from my One XL using XDA Premium
SilverFox66 said:
Isnt that for a sense based ROM? I havent seen 2.41 listed for anything other than a sense ROM
Yeah, changing to WCDMA helped a little, but not much
Im getting the radios out of the radio thread here on XDA. I am d/l the radios in the lower section, for CM. I didnt try a different radio when using Viper, because it was useless seeing as I had so many other issues. I wasnt aware I could use Vodaphone or Telstra radios, on AT&T. I had only tried the 2 AT&T radios. My bad, I will try the others.thanks for the info guys. The speed tests are a moot point for me. As I said, i am in a fringe area. I cant judge anything based on data speed, and leave data turned off most of the time. Im not worried about data speed, or trying to fix anything in that area. Im trying to get my phone to get good enough reception to make/receive calls dependably and send/receive texts dependably. Sorry if there was some confusion over this.
Honestly, I would have stuck with Viper, but my wifi wouldnt work, and I couldnt even get my contacts and calendar imported from my Google account. In fact, there wasnt even a Sync option for contacts. So that was a no go.
Thanks again
Click to expand...
Click to collapse
Yeah it's sense based.I run viper most of the time. That's odd what viper version were you running? I'm on my WiFi now and try to not use data connection at home being I have straight talk and had my speed throttled to almost nothing last 2 months. It have have been a bad download
Sent from my HTC One X using xda app-developers app
Try 2.40 radio, I get the best reception down here in Texas with it, especially when I go to the lease.
-Sugardaddy
Ok, I tried just about every radio in my CM ROM, to no avail. Then, on a whim, I ticked "2G Networks Only", and now I have decent phone signal/reception. This sucks though.... to have my data connection have such an affect on my voice signal. I had always left my data turned off when at home, due to being in a fringe area, and it always bouncing around and killing my battery. That, and I always use wifi at home. Now, I have to leave my data turned on, and in 2G mode... just to be able to make a call. Rather silly to me.
Thanks to everyone who offered to help... MUCH appreciated
P.S. when it was said and done, I think I wound up back on the stock radio for Cory's CM ROM (2.20?)
SilverFox66 said:
Ok, I tried just about every radio in my CM ROM, to no avail. Then, on a whim, I ticked "2G Networks Only", and now I have decent phone signal/reception. This sucks though.... to have my data connection have such an affect on my voice signal. I had always left my data turned off when at home, due to being in a fringe area, and it always bouncing around and killing my battery. That, and I always use wifi at home. Now, I have to leave my data turned on, and in 2G mode... just to be able to make a call. Rather silly to me.
Thanks to everyone who offered to help... MUCH appreciated
P.S. when it was said and done, I think I wound up back on the stock radio for Cory's CM ROM (2.20?)
Click to expand...
Click to collapse
What does your signal do if you have 2g clicked and then turn on wifi
Sent from my HTC One X using xda app-developers app
31ken31 said:
What does your signal do if you have 2g clicked and then turn on wifi
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
signal remains the same... around -87/13, but the Edge "E" icon, disappears from the screen. So, no real difference that I can tell.
It just amazes me that my data connection/type/settings can ruin my voice reception. Hopefully, its going to work decently now.
Good luck with it
Sent from my HTC One X using xda app-developers app
31ken31 said:
Good luck with it
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
thank you! so far, so good! As long as I leave the phone in 2G only, my signal is great. Well, great for my area anyway lol.
With VoLTE being so far out yet, and AT&T not having true 4G, and voice/data being on 2 different frequencies.... how in the world is this happening on this phone? How can enabling/disabling data/4G/2G have such an affect on the voice/text signal? I just cant wrap my mind around this
SilverFox66 said:
thank you! so far, so good! As long as I leave the phone in 2G only, my signal is great. Well, great for my area anyway lol.
With VoLTE being so far out yet, and AT&T not having true 4G, and voice/data being on 2 different frequencies.... how in the world is this happening on this phone? How can enabling/disabling data/4G/2G have such an affect on the voice/text signal? I just cant wrap my mind around this
Click to expand...
Click to collapse
I'm no expert by any means but if I were to take a guess, I would say it may be due to limitations of towers that are closer to you? IE: closer towers provide 2G signal but have not been updated to support 4G? and the towers that support 4G are further from you?
Like I said, I'm no expert, I'm merely taking an educated guess based on what I do know about the technology.
exad said:
I'm no expert by any means but if I were to take a guess, I would say it may be due to limitations of towers that are closer to you? IE: closer towers provide 2G signal but have not been updated to support 4G? and the towers that support 4G are further from you?
Like I said, I'm no expert, I'm merely taking an educated guess based on what I do know about the technology.
Click to expand...
Click to collapse
Actually, I dont know either, but that does make sense. If the phone is in 4G mode, then ti will try to connect to a 4G tower, which could be further away. But, there were times I had a great signal with 4G enabled, but it was in H, or H+.... and wouldnt make a call.
Im just happy I found how to get a decent... steady signal. I love the HOX, and I love the CM ROM... but I was ready to pull my hair out with this lol.
Thanks for the input, I may ask someone at the local store next time Im in. There is one kid in there, that is pretty knowledgeable. I think the rest of them know less than I do lol
Well, I spoke too soon. Now I have good reception, but the quality of my connection SUCKS! I have flashed and tried every radio for CM, and while I have a good signal now (around -85/13) my call quality is terrible and are all fuzzy and fade in and out.
I dunno, Im thinking seriously about going back to stock. I love the idea of having control over my own phone, but Im not in this as a hobby. I just want things to work right. Every ROM I have tried has had one issue or another.... wifi connection issues, wifi going to sleep when it shoudlnt, bluetooth connection problems, a dozen apps starting by themselves, radio/reception issues. Its to the point its just not worth it to me. I dont like having to work on anything every day, and if I do, I feel something needs to change in the situation, if that is the case. Dont get me wrong, Im not slamming any developers, or their projects.
When I was younger, I was always the first to get one of the Celeron CPU's and OC the snot out of it. As I got older, I thought... why? Ill just spend and extra $20 and buy the faster CPU so it is more stable, and not have to mess with anything. Thats sort of how I feel now