I have ICS-SUPERLITE-4.2 on Rogers and i totally lost LTE. I wrote in many existing threads and dev section and no one answered.
I lost LTE, even in areas of full reception, i dont have it, i used stock APN and LTE APN and still dont get it. I do get 4G.
Other on rogers running 4.2 have lte, just less reception so im guessing radio is not the problem. Any idea?
mhx did say he broke lte in 4.1 so maybe you got something from that. im flashing now and ill see how it goies
well im on 4.2 so its supposed to be fixed
I was having lte issues on 4.2 aswell
Sent from my SAMSUNG-SGH-I727 using xda premium
finally got an good answer from another thread...wokred for me instantly
mattymon said:
LTE works fine. Just make sure it says ltemobile.apn instead of rogers-core. If it still doesnt work then go int the phones menu *#2263# and select option 4. After that go back into the menu again and select 1 for automatic.
Click to expand...
Click to collapse
I've had to use the *#2263# option to get LTE on every ICS ROM I have tried so far, works great but sometimes I have had to redo it after the 2nd and 3rd reboot for it to take...
Another solution is after you flash an ICS ROM is to have patience , if you wait 5 minutes or so after flashing, before even touching\unlocking the screen, then most of the time everything settles in nicely on its own.
if ur using rogers with the ics leaks, there's several issues. Call id and lack of lte being one of them. This issue is present with all of them, it is an unstable leal after all. i believe lack of lte unless near a strong connection is due to uclca4 issues.
well after doing what i wrote 2 posts above, i have no issues with phone except for reboot/power off hang, i also get the occasional 2-3 second lag but its quite rare. Besides, im very haapy with rom, battery life is much better than GB
no lte after ics leak
I've the same issue with AT&T in Miami which has a strong LTE network. LTE worked great with GB. After installing the ICS leak all I get is HSPA:11. When I go into *#2263# it says RAT Selection option is restricted. Anyone have a solution?
daviebeach said:
I've the same issue with AT&T in Miami which has a strong LTE network. LTE worked great with GB. After installing the ICS leak all I get is HSPA:11. When I go into *#2263# it says RAT Selection option is restricted. Anyone have a solution?
Click to expand...
Click to collapse
Probably don't have the correct apn. apn needs to be set to pta in order to get lte.
daviebeach said:
I've the same issue with AT&T in Miami which has a strong LTE network. LTE worked great with GB. After installing the ICS leak all I get is HSPA:11. When I go into *#2263# it says RAT Selection option is restricted. Anyone have a solution?
Click to expand...
Click to collapse
Ditto - well actually I AM seeing LTE, but a drastically reduced data rates. Does not seem to matter what ROM, or Kernel or how many times I have re-flashed or re-flashed just the ICS Radio, I get roughly HALF of what I was seeing on GB. Ugh. I don't WANNA go back to Gingerbread. I just want perfection. Is that too much to ask for?
beaups said:
Probably don't have the correct apn. apn needs to be set to pta in order to get lte.
Click to expand...
Click to collapse
It's not the APN, at least in my case. It just crappy reception, and it happened exactly when I flashed ICS, and has been like that ever since. This in spite of re-flashing the Olin leak, reflashing the the radio, etc. It really irks me, and I do NOT want to go back to GB
daviebeach said:
I've the same issue with AT&T in Miami which has a strong LTE network. LTE worked great with GB. After installing the ICS leak all I get is HSPA:11. When I go into *#2263# it says RAT Selection option is restricted. Anyone have a solution?
Click to expand...
Click to collapse
reflash the radio then you should be ok.
apn is set to PTA so not sure what to try next.
Sent from my SAMSUNG-SGH-I727 using xda premium
Sorry. Missed reflashing the radio. haven't rooted since installing I've leak. I'll try that next. Thanks
Sent from my SAMSUNG-SGH-I727 using xda premium
Ha! ICS leak. Gotta love auto correct.
Sent from my SAMSUNG-SGH-I727 using xda premium
RAT Selection option is restricted
Just flashed SeanZ ICS 4.2A-7 ROM and i727UCAL4 modem. I'm still getting "RAT Selection option is restricted". There is nothing else on that screen. This has been 3 different radios now and I cannot get a screen that allows me to select the radio band.
Would flashing a different kernel work? Any other ideas?
Related
All right I've went through all the posts regarding this and none of the options seem to work. I have terrible 3G/4G signal where I live. How can I set the network!!??!! Tried the apps tried the *#*# stuff (all I get with that is "RAT selection restricted!" WTF is RAT?) I can't even make a phone call or send a simple text with the one bar of 3G/4G I get. I know most are probably against the merger but I will hopefully benefit from it cuz there is a T-Mo tower down the street from me. Anyhow please help. I'm rooted, stock AT&T, 2.2.1
loveageek said:
All right I've went through all the posts regarding this and none of the options seem to work. I have terrible 3G/4G signal where I live. How can I set the network!!??!! Tried the apps tried the *#*# stuff (all I get with that is "RAT selection restricted!" WTF is RAT?) I can't even make a phone call or send a simple text with the one bar of 3G/4G I get. I know most are probably against the merger but I will hopefully benefit from it cuz there is a T-Mo tower down the street from me. Anyhow please help. I'm rooted, stock AT&T, 2.2.1
Click to expand...
Click to collapse
It's only possible with Rogers-based ROMs (e.g. Infused v2.x)
It's not possible with the stock AT&T ROM or any derivatives, and causes all sorts of problems with CM7.
Hopefully AT&T's Gingerbread update will fix this.
Entropy512 said:
It's only possible with Rogers-based ROMs (e.g. Infused v2.x)
It's not possible with the stock AT&T ROM or any derivatives, and causes all sorts of problems with CM7.
Hopefully AT&T's Gingerbread update will fix this.
Click to expand...
Click to collapse
Would I be able to flash the rogers rom on mine? My guess is no... but its worth asking.
loveageek said:
Would I be able to flash the rogers rom on mine? My guess is no... but its worth asking.
Click to expand...
Click to collapse
Infused v2 is Rogers-based.
Entropy, I was able to force 2G with Infused 1.5.3 when I had it paired with the Rogers modem. I used the star code *#2263# and that allowed me to select a GSM only band.
Also, on current infused.v2 builds, I cannot force 2G as they're not using Rogers modem and I don't feel like flashing another modem and bricking it on these test builds.
Sent from my SAMSUNG-SGH-I997R using XDA App
TheMan42 said:
Entropy, I was able to force 2G with Infused 1.5.3 when I had it paired with the Rogers modem. I used the star code *#2263# and that allowed me to select a GSM only band.
Also, on current infused.v2 builds, I cannot force 2G as they're not using Rogers modem and I don't feel like flashing another modem and bricking it on these test builds.
Sent from my SAMSUNG-SGH-I997R using XDA App
Click to expand...
Click to collapse
Oh, thanks for the info - it's the modem and not the userland! Very useful to know.
I just switched to Rogers with an LTE plan and LTE SIM card, and my area is has complete LTE coverage but the best I am getting is HSPA+. Does the UCLA3 only enable LTE on the 700mhz band? If so, what is the best Rogers modem to use for LTE? Thanks!
Oh for ****s sake
Sent from my SAMSUNG-SGH-I727 using xda premium
not sure about lte, but it works for 3g
BaconStep said:
Oh for ****s sake
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
and wow relax, just tell him hes in the wrong section
Welcome back man!!! looks like you need to check on rulez again so you know where to post your questions!!!!
To answer your question just make nadroid and flash it if it does not have LTE then you can clear out and always go back to ur Nandroid!
Woah was this posted in the Developement section? :/ I lurk XDA 24/7 and I have like 10 tabs open so I posted in the wrong one :/ Really sorry about this, didn't mean to post here
BaconStep said:
Oh for ****s sake
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
There's really no need for that at all. That only makes it worse.
OP, you're better off asking a question like this in the QA section. Good luck!
SGS2X said:
Woah was this posted in the Developement section? :/ I lurk XDA 24/7 and I have like 10 tabs open so I posted in the wrong one :/ Really sorry about this, didn't mean to post here
Click to expand...
Click to collapse
Whoops! Sorry.
Sent from my GT-P7510 using xda premium
I can't remember if this works on the ulca3 modem, but try dialing *#2263# rogers uses lte B4 1700/2100 try manually setting it to that and see if it works
appdroid said:
Welcome back man!!! looks like you need to check on rulez again so you know where to post your questions!!!!
To answer your question just make nadroid and flash it if it does not have LTE then you can clear out and always go back to ur Nandroid!
Click to expand...
Click to collapse
Does the nandroid restore the baseband? I know a nandroid restores everyhting else but you might actually have to reflash the original radio that you were on before the UCLA3 version...not actually sure though.
This radio is the best for Rogers everything work great, lte as well and reception is great. At work where I only sometimes got connection at all, I have min two bars now, and internet works perfect. Thanks for makers and uploader
Sent from my SAMSUNG-SGH-I727 using xda premium
i concur.
lte picks up where the rogers modem doesn't I go between that and the telus modem (which doesn't do LTE but has good hspa speeds) It also does a great job in just automatic mode selecting the right band for low signal areas.
Yep I use it on Rogers with LTE working.
Also, someone mentioned a fix where you dial *#2263# to change the baseband to LTE only.. which works, but I stopped getting incoming calls and couldn't make outgoing calls when I did that.. fyi. Maybe it was just my case.
coolerbean said:
Yep I use it on Rogers with LTE working.
Also, someone mentioned a fix where you dial *#2263# to change the baseband to LTE only.. which works, but I stopped getting incoming calls and couldn't make outgoing calls when I did that.. fyi. Maybe it was just my case.
Click to expand...
Click to collapse
No, i read somewhere only data works over LTE everything else is UMTS, I forgot about that
32dave said:
No i read somewhere only data works over LTE everything else is UMTS, I forgot about that
Click to expand...
Click to collapse
Not only data uses LTE network. When I used LTE data plan I got missing calls sometime (the call went directly into voice mail). Called rogers and the tech confirmed that calls work through LTE as well. If the signal of LTE is weak the call then bounces back into voice mail.
odeccacccp said:
This radio is the best for Rogers everything work great, lte as well and reception is great. At work where I only sometimes got connection at all, I have min two bars now, and internet works perfect. Thanks for makers and uploader
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
i've been switching between LA3 and KJ7 modems past 2 weeks...signal seemed great on LA3, but i'm not convinced it's good for me....
Consistently past several tests I get 2-3Mb down and 0.5-0.8Mb up on LA3......and if I flash to KJ7 I get 2-14Mb down and 1-3Mb up.....flash back to LA3 and it changes back....and flash again to KJ7 and back to other numbers....
In my area, KJ7 actually seems to be better, and I've switched back for now. I'm mainly around HSPA, not LTE though...
It also seems to be giving me better battery life...albeit we're talking difference of maybe 30 minutes to 1 hour...this phone is a PIG when it comes to battery life
So I've been using this modem since yesterday and I haven't been able to pick up an LTE signal but maybe Rogers coverage map is incorrect? idk but the 3g signal has been great
The only problem I'm facing (which I'm not sure if it's caused by the modem or something else) is that I couldn't send a text message to anyone but myself cuz it would fail... but if that person sends me a text first, then I can start sending text messages back no problem...
I registered for Rogers One Number, does that have anything to do with it?
UCLA3 radio works fine for me and I'm on Rogers network.
To check if your problems are radio dependent, why can't you just flash back to the Rogers radio? I believe it is on the same radio thread.
number16 said:
UCLA3 radio works fine for me and I'm on Rogers network.
To check if your problems are radio dependent, why can't you just flash back to the Rogers radio? I believe it is on the same radio thread.
Click to expand...
Click to collapse
I tried that twice but when I check under Status it still shows the UCLA3 and not the one I flashed.
Also, I keep setting to to GSM/HSPA/LTE (Auto) mode but it keeps switching back to the one without LTE
EDIT - For some reason the APN settings were only for non-LTE access. Changed the apn to ltemobile.apn and now it works
SGS2X said:
I tried that twice but when I check under Status it still shows the UCLA3 and not the one I flashed.
Also, I keep setting to to GSM/HSPA/LTE (Auto) mode but it keeps switching back to the one without LTE
EDIT - For some reason the APN settings were only for non-LTE access. Changed the apn to ltemobile.apn and now it works
Click to expand...
Click to collapse
Did you figure out why you couldn't write new modem over ucla3
Sent from my SAMSUNG-SGH-I727 using xda premium
coolerbean said:
Yep I use it on Rogers with LTE working.
Also, someone mentioned a fix where you dial *#2263# to change the baseband to LTE only.. which works, but I stopped getting incoming calls and couldn't make outgoing calls when I did that.. fyi. Maybe it was just my case.
Click to expand...
Click to collapse
don't do that, just go to Settings/Wireless/Mobile Networks and change it there.
---------- Post added at 12:50 PM ---------- Previous post was at 12:48 PM ----------
SGS2X said:
So I've been using this modem since yesterday and I haven't been able to pick up an LTE signal but maybe Rogers coverage map is incorrect? idk but the 3g signal has been great
The only problem I'm facing (which I'm not sure if it's caused by the modem or something else) is that I couldn't send a text message to anyone but myself cuz it would fail... but if that person sends me a text first, then I can start sending text messages back no problem...
I registered for Rogers One Number, does that have anything to do with it?
Click to expand...
Click to collapse
Change the Apk to ltemobile.apk, will work fine
Hi all.
I just finished picking up my sgs2lte. Really excited about it. I just finished rooting it and now I would like to install an ICS 4.0.4 rom.
My specs are:
SGH-I727R
Android 2.3.5
Baseband I727RUXKJ7
Kernel 2.6.35.11
Build GB.RUXKJ7
I am hoping someone can assist me with this.
What is the best baseband for rogers?
What is the biggest sdcard that I can buy for it? I heard that this device can now accept 64 class10 sdcards, is this true?
Thanks all,
Heeter
I don't think it matters much.
UCLE2 is the recommended modem for most ROMs (Most ROMS will state which modem is recommended), especially the AOSP based ones like CM9 or AOKP. For the most part they seem to be interchangeable.
I have used the UCLE2 and UCLF3 baseband modems with no issues (I believe UCLF3 is the RAT unlocked rogers modem..).
Right now I am using the latest AT&T modem UCLF5, with CyanogenMod 9 (7/02/2012 nightly) and it seems to work just fine.
Are you able to get 4G with your setup?
Thanks for your response, Rabidsmurf
Heeter
Yes, although the phone is somewhat misleading, at least in CM9
The icon will show 3G until in use when it switches to H, I assume this is for power savings or something. Download the speedtest.net app to confirm. On 4G i get around 8Mb/s down and 2.5 Mb/s up.
Additionaly what Rogers calls 4G is HSPA+, if you go to About Phone > Status under mobile network type it should say HSPAP:15 (That is HSPA+ 4G on rogers), conversely 3G is UMTS:3. My phone flips between the two as I mentioned when not in use or in use, could be a ROM specific thing.
Heeter said:
Hi all.
I just finished picking up my sgs2lte. Really excited about it. I just finished rooting it and now I would like to install an ICS 4.0.4 rom.
My specs are:
SGH-I727R
Android 2.3.5
Baseband I727RUXKJ7
Kernel 2.6.35.11
Build GB.RUXKJ7
I am hoping someone can assist me with this.
What is the best baseband for rogers?
What is the biggest sdcard that I can buy for it? I heard that this device can now accept 64 class10 sdcards, is this true?
Thanks all,
Heeter
Click to expand...
Click to collapse
Hi
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
RabidSmurf said:
Yes, although the phone is somewhat misleading, at least in CM9
The icon will show 3G until in use when it switches to H, I assume this is for power savings or something. Download the speedtest.net app to confirm. On 4G i get around 8Mb/s down and 2.5 Mb/s up.
Additionaly what Rogers calls 4G is HSPA+, if you go to About Phone > Status under mobile network type it should say HSPAP:15 (That is HSPA+ 4G on rogers), conversely 3G is UMTS:3. My phone flips between the two as I mentioned when not in use or in use, could be a ROM specific thing.
Click to expand...
Click to collapse
Well, mine was saying 4G before the rooting with the factory settings,
But it says UMTS:3 on there now.
I will install CM9, maybe that will make the difference, I just installed the ATT UCLF5 radio, still 3G
Heeter
What ROM are you using?
If it's SKY ICS, in my experience it will always say 4G no matter what (Unless it's LTE maybe).
If you see UMTS:3 try to open an APP that has constant network demands, it might switch while you're looking at it in the status to HSPAP:15, sometimes it's tough to catch it as the phone seems to go idle as soon you go into the menus
I am also in Edmonton by the way.
Hi Rabidsmurf
Was mistakingly on the Chimera rom, but I just reformatted everything and now is using this SKY ICS 4.2F6 with the UXCLF3 radio, now I am getting the 4G signal
Thanks sooo much for helping me out.
Right on, cool, fellow Edmonton dude.
Heeter
No problem.
I was also going to suggest reviewing your APN settings if all else failed. Found a typo earlier with the APN that comes with CM9 rom (caused MMS to not work), guess that's why it's still an Alpha.
RabidSmurf said:
No problem.
I was also going to suggest reviewing your APN settings if all else failed. Found a typo earlier with the APN that comes with CM9 rom (caused MMS to not work), guess that's why it's still an Alpha.
Click to expand...
Click to collapse
lol actually its at the level of an RC, but I digress
I'm using the I727RUXLF3 Baseband on AOKP Build 40 in the Edmonton area as well and it's running great. I see the same behaviour with the switching between 3G/H signal.
For some reason I cannot get LTE to work at all on CM10. I've done everything and it still wont work at all. I tried reverting back to stock rom, and when I did, LTE worked. So I thought if I went back to CM10 from stock it would resolve the issue, but it did not. I've checked my APNs and I cannot change the preferred network mode and i tried *#*#info#*#* and i can't change anything there to anything that has LTE on it. I'm not sure if it's just a problem with the ROM or what, but I've done plenty of researched, searched all the forums, and can't find anything that will fix.
Additional information:
Im in ATT
I've tried all the radios
and I AM in an LTE area.
nickd009 said:
For some reason I cannot get LTE to work at all on CM10. I've done everything and it still wont work at all. I tried reverting back to stock rom, and when I did, LTE worked. So I thought if I went back to CM10 from stock it would resolve the issue, but it did not. I've checked my APNs and I cannot change the preferred network mode and i tried *#*#info#*#* and i can't change anything there to anything that has LTE on it. I'm not sure if it's just a problem with the ROM or what, but I've done plenty of researched, searched all the forums, and can't find anything that will fix.
Additional information:
Im in ATT
I've tried all the radios
and I AM in an LTE area.
Click to expand...
Click to collapse
Just making sure, but you know the LTE icon doesn't exist in cm10 , right? LTE is indicated by the 4g icon
xcrazydx said:
Just making sure, but you know the LTE icon doesn't exist in cm10 , right? LTE is indicated by the 4g icon
Click to expand...
Click to collapse
Yeah, I only get HSPA+, HSPA, 3G
nickd009 said:
Yeah, I only get HSPA+, HSPA, 3G
Click to expand...
Click to collapse
Ok, try different apn. Which cm10 are you trying to use?
Does the problem happen on other ROMs? I'm not saying to use a different ROM, just saying that if it doesn't happen on, say, AOKP or Orthus (both CM-based), it's probably an issue with how CM10 is configured on your phone.
If you go into network operators (settings -network)and select att it will allow to change modes.
whassupmyninja said:
If you go into network operators (settings -network)and select att it will allow to change modes.
Click to expand...
Click to collapse
omg.. that was it all along. wtf, I feel so dumb now..
nickd009 said:
omg.. that was it all along. wtf, I feel so dumb now..
Click to expand...
Click to collapse
Haha yeah most of the time this setting is overlooked and this option enables you to turn off LTE if you want (which you don't have to have a RAT unlocked modem as presumed) and if you go to *#*#4636#*#* on your dialer you can have it set to LTE only as well.
UZ7 said:
Haha yeah most of the time this setting is overlooked and this option enables you to turn off LTE if you want (which you don't have to have a RAT unlocked modem as presumed) and if you go to *#*#4636#*#* on your dialer you can have it set to LTE only as well.
Click to expand...
Click to collapse
I actually have another problem now, after a reboot, it doesn't show any options for me to choose under available networks?
it came back after a few tries but then went away again, it's not consistently there to choose.
Does it show a searching animation?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I have the exact same issues. I've done everything on this post plus done all the research as well. For my problem whenever I enter an LTE area my data service completely drops for about 5 seconds and then when it connects it only shows HSPA+. I have never been able to pick up LTE. When I was on CM9.1 I had no issues at all. LTE connected with no issues. So is this a CM10 issue or a phone issue?
try this, might help, might not, make a backup, if you have more than one apn, remove all apn's except your lte apn(ATT Pta, for rogers :ltemobile), restart phone
edit: of course make sure it was set to the lte apn in the first place, if it was and still have probs, do above procedure if you have more than one apn
vincom said:
try this, make a backup, remove all apn's except your lte apn, restart phone
Click to expand...
Click to collapse
For some reason my APN was not set to the lte one (ATT Pta). I changed it to that. Hopefully that fixes my problem. Thanks for the help!
I have a slightly different problem. I am running the latest cm10 nightly and notice that any time I get lucky and go into a 4g coverage area I can only make phone calls. No data transfers at all. I have my APN set to ATT LTE pta which I assumed is the right selection. Im normally in a A3g(HSPA)~700-17 coverage area. Is this the wrong APN to use?
njbballjerzy5 said:
For some reason my APN was not set to the lte one (ATT Pta). I changed it to that. Hopefully that fixes my problem. Thanks for the help!
Click to expand...
Click to collapse
The APN change worked for me. This is the proof
njbballjerzy5 said:
The APN change worked for me. This is the proof
Click to expand...
Click to collapse
Do you automatically switch back and fort from 3 to 4g with that APN setting when you move around without losing data capability?
26.2man said:
Do you automatically switch back and fort from 3 to 4g with that APN setting when you move around without losing data capability?
Click to expand...
Click to collapse
Yup. I have HSPA/HSPA+ around my house but close to work I have LTE. No problem with switching or losing data connection when I go from HSPA to LTE. Just double check your APN settings. There might be a typo or some missing field. Or you can create a new APN for lte and use that as your default.
njbballjerzy5 said:
Yup. I have HSPA/HSPA+ around my house but close to work I have LTE. No problem with switching or losing data connection when I go from HSPA to LTE. Just double check your APN settings. There might be a typo or some missing field. Or you can create a new APN for lte and use that as your default.
Click to expand...
Click to collapse
Okay
Im a nooob. How do you create APN's ?
26.2man said:
Okay
Im a nooob. How do you create APN's ?
Click to expand...
Click to collapse
Try using Google search! It always helps me!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
@26.2man, you've gotta have att provision you for lte at the store or whatever if you haven't done so already. Then it should work.
Sent from my HTC PH39100 using xda premium
I know the skyrocket I727 supports LTE. With stock firmware LTE is not a problem. But when I put any custom ROM it no longer goes to LTE. Is this normal or is their a separate download for an LTE radio in these custom ROMS?
This is not common at all. Check that your apn settings are correct. And you have the recommended radio. What rom are you using?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I have tried slimbean superlite and a few others. My radio is well I can't seem to find that. My baseband version is i727ucll3 I use CWM touch...When I go into mobile networks is says HSPA:10 and that's it.
Radio or modern is the same thing as baseband. I'm not familiar with the slim bean rom so maybe someone who is can give you a better answer. But in Mobil networks, apn on the superlite rom I have three options with one being lte.
Sent from the short bus
If you're using a rom like PA, CM10, AOKP and probably Slim Bean too.. 4G=LTE.
Do I need to install a new radio? I just ran a speed test and I am getting only about 2 megs down, where before on stock it was like 15 megs down...
falcon26 said:
Do I need to install a new radio? I just ran a speed test and I am getting only about 2 megs down, where before on stock it was like 15 megs down...
Click to expand...
Click to collapse
You have the LTE Apn, correct?
OK don't laugh, but I have no idea what APN stands for where should I like for that? Where would I get one Bear with me here I'm not a complete NOOB I can do some stuff Thanks for the help too...
Settings, more, Mobil networks, access point names(apn)
Sent from the short bus
Ok I'm their but it will not let me choose anything except HSPA:10 when I try to choose LTE it reverts back to the HSPA
falcon26 said:
Ok I'm their but it will not let me choose anything except HSPA:10 when I try to choose LTE it reverts back to the HSPA
Click to expand...
Click to collapse
Can you take a screenshot of this screen.. it'd be easier to see what's up?
Edit: Also, what rom are you on now?
The radio you have is the right one, but I'd re-flash it. See vincoms stickies in the development section. He'll have the radio download and how to do it.
Sent from the short bus
falcon26 said:
Do I need to install a new radio? I just ran a speed test and I am getting only about 2 megs down, where before on stock it was like 15 megs down...
Click to expand...
Click to collapse
Download the ucll3 radio from vicoms sticky and flash it. You don't need to do any wipes and its not going to muck anything up. It'll take care of your problem.
Sent from the short bus
Have you run a speed test lately? As said, many custom ROMs don't have an LTE icon; 4G is LTE, H+ is what AT&T considers "4G" in areas without LTE coverage. Running a speed test is an easy way to tell. If you're getting LTE speeds when your phone says 4G, you're on a ROM that doesn't show an LTE icon.
jd1639 said:
Download the ucll3 radio from vicoms sticky and flash it. You don't need to do any wipes and its not going to muck anything up. It'll take care of your problem.
Sent from the short bus
Click to expand...
Click to collapse
Whoa how did you reply from the past?? On my tapatalk HD app on my note 10.1, it shows your reply date as 12/31/1969. Lol sorry to derail.
Do you have the wrong radio installed? i know that when i had ull3 installed and needed ulck4 it didn't show i had service at all, but it worked still
pre4speed said:
Whoa how did you reply from the past?? On my tapatalk HD app on my note 10.1, it shows your reply date as 12/31/1969. Lol sorry to derail.
Click to expand...
Click to collapse
I'm a blast from the past!
Sent from the long bus, I got mainstreamed
Have you tried opening dialer up, entering *#*#4636#*#*
Go to phone information, scroll down to a drop down menu. Sometimes it'll say WCDMA preferred. Open it and select LTE and your signal should drop and cone back as LTE. After select LTE/GSM and close it.
Are you sure you were on LTE in the first place? AT&T is kinda misleading with their branding and calls HSPA+ "4G" whereas LTE is "4G LTE".
Reply
T.J. Bender said:
Have you run a speed test lately? As said, many custom ROMs don't have an LTE icon; 4G is LTE, H+ is what AT&T considers "4G" in areas without LTE coverage. Running a speed test is an easy way to tell. If you're getting LTE speeds when your phone says 4G, you're on a ROM that doesn't show an LTE icon.
Click to expand...
Click to collapse
I try flashing pacman rom and my phone is displaying the 4g logo. In the pacman rom thread, I saw a snap shot with
the lte symbol. Any ideas?