[Q] Problem after flashing Kernel...... - Samsung Galaxy SL i9003

Hi everyone,
I got problem after flashing Kernel on my I9003. I am on Slim beam v3.1 rom with signal fix kernel.
Every time, after I flash every kernel( siri, cm9 alpha 11 v3, cracker ....) in recovery, when i reboot, it stop at the Samsung screen (that one shows Samsung Galaxy S GT I9003) .for hours, and finally i need to reflash the rom through odin (becoz i cannot reboot to recovery but download mode) and restore my backup.
At the time i flash the signal fix kernel in recovery, i still get that problem. at that time luckily , loSconosciuto provided an odin version so i can flash the kernel.
Did anyone can help for solving my problem ? Thanks in advance

To revert back to previous kernel
for SIRI KERNEL
re-flash "CM10 Alpha 4" or restore your backup
for CrackerizerKernel
Download and flash "kernel-cm-10-A4-restore.zip" from here(might work for SIRI kernel-never tried)...http://forum.xda-developers.com/showthread.php?t=2029921
for ALPHA 11 Kernel
you can just flash any kernel over it

u cannot flash custom kernels like u flash custom roms.. ie once u flash any custom kernel n then if u want to try other kernel, then u hav to flash ur present rom again.. then flash kernel.
Sent from my GT-I9003 using xda app-developers app

maybe idont say it clear. everytime when i want to flash kernel, i did a clean flash from ddlf2, but i still get that problem.
Sent from my U9GT2 from moage.com using xda premium

Try xxkpe with pit file then flash ddlf2 then kernel of your choice.

You can try formatting your internal and external memory and then flash the stock rom through the custom rom with custom kernel.

Related

Stock Kernel

Hello
In the package of creed's rom there also one files called stock kernel restore So i wanted to ask which kernel is that is it the official Kernel od DDKT2 (2.3.6) Indian Official firmware or some other Coz i have installed Creeds_801_oc-uv-ext4-governors I wan to switch to official rom so can i switch with the current kernel installed or i need to restore kernel that is provided in that package or some other kernel is required
To switch back stock rom just flash it over odin..no need to change kernels
Thanks for replying
I am not gonna switch back as i have never expierienced this much smooth phone before...
Sent from my GT-S5670 using XDA Premium App
Data reset before flashing the (Stock) rom and after flashing the rom through odin is required or not ?
lovbudy said:
Data reset before flashing the (Stock) rom and after flashing the rom through odin is required or not ?
Click to expand...
Click to collapse
Yup data reset is a must for flashing other roms..if its an update of same custom rom then there's no need..
lovbudy said:
Data reset before flashing the (Stock) rom and after flashing the rom through odin is required or not ?
Click to expand...
Click to collapse
Don't forget to wipe data n wipe cache before flashing bro..
..

Problems flashing ddtk3

I have cm7.2 rc0 that I flash on cm 7.2 rc5.5 that I directly flashed on ddtk3(without actually using it even once) that I flashed over stock gb 2.3.4 . Now I used Odin and wiped cache /data on the stock recovery (as well as cwm) but the phone still goes into boot loop. I want the stock rom but can't install it. Help!
Also how to root it? Don't want to use rajrocks deoxed thing cause I don't like the colour scheme and stuff.
Thanks
itworks awsome
May be you Can try this on your own risk
The stock rom links are also available there
http://forum.xda-developers.com/showpost.php?p=23324199&postcount=1
Thanks I'll try that but I really don't think it's a problem with the rom.
Sent from my GT-S5670 using xda premium
u have to use it ddkt3 for sometime
Try to flash the stoc rom via odin, search youtube for tutorial flashing via odin

how to intall custom recovery on galaxy fit gt-s5670 on stock rom 2.3.6

i have stock rom 2.3.6 installed on my phone..
n i just flashed custom recovery from tj style.. wiped data n wiped cache
then i reboot bt my phone is nt starting now..its just keep rebooting again and again..plz help
you may have to reflash via oden ,i'm not sure
try to reflash your Stock 2.3.6 ROM via odin, and then flash tj_style's CWM via odin too
Syfer_Fever said:
try to reflash your Stock 2.3.6 ROM via odin, and then flash tj_style's CWM via odin too
Click to expand...
Click to collapse
hmmmm but the stock rom has rfs file system and so cwm can't be used on it
cwm can't use for Backup stock ROM
and if cwm can't installed in stock ROM how can we use Custom ROM? lol
lol i see
i have to install cwm using oden before using any custom rom thanks dude i'm new here =D
Dude what you have to do is paste any rom into root of your SD and flash via CWM wipe data and reboot it works it worked for me...
If u want to flash stock rom reflash the stock rom via Odin....
Press "thanks" if it helped u
Sent from my GT-S5670 using xda premium
andluv said:
Dude what you have to do is paste any rom into root of your SD and flash via CWM wipe data and reboot it works it worked for me...
If u want to flash stock rom reflash the stock rom via Odin....
Press "thanks" if it helped u
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Thanks dude..
Day is exactly what I did n it worked 4 me:beer::beer::beer:
Sent from my GT-S5670 using XDA
vikas1038 said:
i have stock rom 2.3.6 installed on my phone..
n i just flashed custom recovery from tj style.. wiped data n wiped cache
then i reboot bt my phone is nt starting now..its just keep rebooting again and again..plz help
Click to expand...
Click to collapse
I had this prob yesterdqy,,
You need to flash the original stock rom before you can flash another rom..
Flash the "S5670XXKPI" stock with ODIN,, after that, your SGFit will be fine... You can flash other rom qfter you flash the original rom..
Good Luck!..
Sent from my GT-S5670 using xda premium
I installed stock ROM S5670XWKTI. After, I installed CWM. Via CWM I can install customize ROM, but I do not want a custom ROM than the stock ROM. All custom ROM have bugs. For me the most stable stock ROM. For example. for me on the CWM not work mount / system, cash, etc.
Yesterday I tried on stock ROM install 14 toggles Galaxy Fit , but before that the CWM has to go to mount / system that does not work for me.
You cant mount system via cwm on stock rom because to mount system, it must be ext4 witch is not in stock rom.
Sent from my GT-S5670 using Tapatalk
Dude, the CWM by Tj style is for the ext4 system... and the stock rom is RFS..
You should flash the CWM by Vish coz it support the RFS system , not the Tj style vers..
Cmiiw..
Sent from my GT-S5670 using xda premium
you guys CAN install CWM v5 by tj_style in stock ROM, but it CANNOT backup stock ROM wich is RFS, if u on stock ROM and then install cwm v5 via odin and u can directly flash custom ROM via CWM
CWM by Vish coz link for download
pito2204 said:
CWM by Vish coz link for download
Click to expand...
Click to collapse
Link:
http://forum.xda-developers.com/sho...ighlight=clockworkmod+recovery+for+galaxy+fit
http://forum.xda-developers.com/showpost.php?p=24719114
I use CWM_rfs.zip that posting by pratyush.creed and it works on my Stock ROM S5670JPKT4.
googler78 said:
http://forum.xda-developers.com/showpost.php?p=24719114
I use CWM_rfs.zip that posting by pratyush.creed and it works on my Stock ROM S5670JPKT4.
Click to expand...
Click to collapse
How you used. With Odin or ...?
Please post all questions in the Q&A section.
Thread Moved

[FIX] Flashing Stock Rom/Custom ROM over Angeeks ROM

I'm facing a weird problem. I can't flash stock rom via Odin. The phone is always stuck on the Samsung screen. Tried xxlq7/xxlq9. I'm on angeeks rom. Wanted to try the blueberry sensation rom.
So for that I tried flashing xxlq9 again as recommended and faced this issue.
EDIT [FIX]
As suggested by Kartik pat i was able to successfully flash stock rom over angeeks rom
I followed the following steps:
1. Take tb for all apps [angeeks rom]
2. Restore any gingerbread backup you might have from CWM. Boot your device.
3. Flash xxlq9 via Odinv3. Boot device
4. Flash cwm4. Boot device.
5. Flash ardatdat kernel v4.0 [ensures the erase bug issue is resolved]
6. Boot System
7. Reboot into recovery. Wipe data,cache,dalvik cache.
8. Boot system and tada
If you want to flash bb rom over this then:
1. Flash the bb rom v1. Reboot.
2. Flash the bug fix zip. Reboot.
3. Flash sensation mod
P.s. this method worked for me using the gb backup and cwmv4.
Hope this helps.
EDIT 2:
As posted by vikesh....
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Sent from my GT-I9103 using xda app-developers app
Try to restore ur cwm backup of gb if u have and den flash ics
I did the same thing i was also using angeek's rom and now i m using BB
Can I restore my cwm backup over xxlq9?
Sent from my GT-I9103 using xda app-developers app
pulley06 said:
Can I restore my cwm backup over xxlq9?
Click to expand...
Click to collapse
yes you can and which ODIN version you are using for flashing better to flash using v3......
mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Sent from my GT-I9103 using xda app-developers app
vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Click to expand...
Click to collapse
i am also not sure buddy i also faced this kind of issue once then i restored to GB and flashed it again, but i flashed Mazel on Leaked ICS so i thought it was the problem ......
pulley06 said:
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Click to expand...
Click to collapse
yes buddy you are correct, you need to wipe all 3 ie data, cache & Dalvic cache..
But i feel its not mandatory to flash XXLQ9 because i use to flash on my Leaked ICS and it was working fine when i used it.....
i followed all the steps mentioned above...the phone booted to the home screen of xxlq9...flashed bb rom successfully as per cwm...but the phone is stuck on the samsung screen that comes after galaxy r appears
vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It gets stuck for like 10-15 secs but later it flashes ROM properly,
@mj whats wrong to do it with V1.85?
@pulley I also faced same problem yesterday, but I think that time i did not mount/unmout system so I reflashed BB again by pressing two times mount>unmount (final would be unmount/system), so just press two times, still not booting then again wipe all 3 (cache,dalvik and data)
I think there is few points we should consider while flashing BB or MAZEL2 rom if u are on ANGEEK ROM.
If anybody who sucessfully flashed Stock rom & then BB or Mazel 2 after Angeek, must come in front and give us the solution.
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
kataria.vikesh said:
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Done :good:
pulley06 said:
Done :good:
Click to expand...
Click to collapse
Great buddy. I will add this in Angeek ROM'S OP.
Sent from my GT-I9103 using xda premium
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Optional Method
on request of pulley06 posting this
I was facing same problem from yesterday, so i followed this
1. remove battery/SDcard/SIM
2. wait for 5 minutes
3. insert SIM and SD card and plug USB cable in phone and connect it with laptop/PC (DO NOT INSERT BATTERY)
4. wait for one minute and now insert battery (With USB cable connected)
5. switch on
6. flash stock ICS and reboot
5 flash CWM (I used 5.5 for BB ROM) and reboot
7 enter CWM
8 Mount/Unmount> click on Unmount/system again click same (so click two times)
9 now flash BB ROM and Reboot
10. Enter CWM and repeat step 8 and flash Sensation Theme. and reboot.
vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I hope the above post helps you :thumbup:
Sent from my GT-I9103 using xda app-developers app
vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
try flashing Stock GB through Odin.
i created back up of both nordic and austian rom (also gb)
with ardadat kernel
just restore
wipe data/ cache
and flash roms
i have no issue,
Nordic rom flashing over angeek mod rom
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Requesting OP to add this one also in his OP Post.
Vikesh.. looks good.. please add few steps as to how to make this nordic room rooted.. as you cant directly flash ardatdat kernel over it as it already full in system rom partition.. :silly:
This means if I don't have an earlier backup of ics/gb and i am on angeeks rom I can't flash any new rom...plz clarify....
Sent from my GT-I9103 using xda premium

[Q] stuck at bootloop in stock

i cant flash a stock rom now.....doesnt boot...gets stuck at bootloop.....wiped cache and data and dalvik chache.still nothing happened...nt showed some error while wiping the data...any solutions? coz i really want my stock rom back!
Can you be a more specific? which Rom are you coming from? Which stock Rom you flashing?
"...The child is grown, the dream is gone..." - Pink Floyd.
thats normal for me. you need to flash a custom kernel after you flash stock rom via odin to boot it up. flash stock, wait till bootloop. take off battery and put back. get to download, flash kernel.
Sent from my GT-i9003 using xda app-developers app
i dint any problems till yesterday morning...used to flas fine.... bt all of a suuden this happens.... error is shown while clearing data as some e:\sd path eroor or something.... though i had problems in bottinf the stock rom...i easily flashed cm10 a4 and then jellybam...bt stock aint working anymore..
nandujanuary02 said:
i dint any problems till yesterday morning...used to flas fine.... bt all of a suuden this happens.... error is shown while clearing data as some e:\sd path eroor or something.... though i had problems in bottinf the stock rom...i easily flashed cm10 a4 and then jellybam...bt stock aint working anymore..
Click to expand...
Click to collapse
cm10a4 is the key point. read cm10 thread op. this happend show u never read enough.
Sent from my Galaxy Nexus using Tapatalk 2
try flash xxkpq with pit then bam kernel then cm10a4.
Repartition from odin would be the best solution... i think.
avoid using bootloaders while repartitioning from a4 to stock or a3.. that step cost lola his phone.. theres a risk. its better to not try the pits.. just flash stock.. and a kernel later..
Sent from my GT-I9003 using xda app-developers app
did you use the bootloader file when flashing back to stock rom? you better not use it in my opinion. lola have said in the jellybam thread that you can only use the bootloader in froyo roms.

Categories

Resources