Related
I want to go back to my stock rom !!
Creed's rom is good,.. but there are a lot of bugs,..! I mean the system hangs and the display just goes invisible,..! the boot takes too long and sometimes it never boots !!!!
i want to go back.... can any one please help ???
the baseband is still S5670DDKQ5 !
can i flash back with CWM 5 ?
how to flash ??
Should i clear data/ wipe cache before and after installing the stock ?
you can go back to the stock ROM whenever you want. Just load up downloading mode and flash the stock ROM via ODIN.
dhananjaipai said:
I want to go back to my stock rom !!
Creed's rom is good,.. but there are a lot of bugs,..! I mean the system hangs and the display just goes invisible,..! the boot takes too long and sometimes it never boots !!!!
i want to go back.... can any one please help ???
the baseband is still S5670DDKQ5 !
can i flash back with CWM 5 ?
how to flash ??
Should i clear data/ wipe cache before and after installing the stock ?
Click to expand...
Click to collapse
Flash 2.2.1 then 2.3.4..
Ur done.. It will definately work..
Sent from my GT-S5670 using xda premium
Stock Rom
Hello Can anyone provide me with Indian Official Stock Rom links
lovbudy said:
Hello Can anyone provide me with Indian Official Stock Rom links
Click to expand...
Click to collapse
ddkt3
http://forum.xda-developers.com/showthread.php?t=1490362
If i Want to switch back then just paste this in card and flash update or need odin uploader???
i have stock rom 2.3.6 installed on my phone..
n i just flashed custom recovery from tj style.. wiped data n wiped cache
then i reboot bt my phone is nt starting now..its just keep rebooting again and again..plz help
you may have to reflash via oden ,i'm not sure
try to reflash your Stock 2.3.6 ROM via odin, and then flash tj_style's CWM via odin too
Syfer_Fever said:
try to reflash your Stock 2.3.6 ROM via odin, and then flash tj_style's CWM via odin too
Click to expand...
Click to collapse
hmmmm but the stock rom has rfs file system and so cwm can't be used on it
cwm can't use for Backup stock ROM
and if cwm can't installed in stock ROM how can we use Custom ROM? lol
lol i see
i have to install cwm using oden before using any custom rom thanks dude i'm new here =D
Dude what you have to do is paste any rom into root of your SD and flash via CWM wipe data and reboot it works it worked for me...
If u want to flash stock rom reflash the stock rom via Odin....
Press "thanks" if it helped u
Sent from my GT-S5670 using xda premium
andluv said:
Dude what you have to do is paste any rom into root of your SD and flash via CWM wipe data and reboot it works it worked for me...
If u want to flash stock rom reflash the stock rom via Odin....
Press "thanks" if it helped u
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Thanks dude..
Day is exactly what I did n it worked 4 me:beer::beer::beer:
Sent from my GT-S5670 using XDA
vikas1038 said:
i have stock rom 2.3.6 installed on my phone..
n i just flashed custom recovery from tj style.. wiped data n wiped cache
then i reboot bt my phone is nt starting now..its just keep rebooting again and again..plz help
Click to expand...
Click to collapse
I had this prob yesterdqy,,
You need to flash the original stock rom before you can flash another rom..
Flash the "S5670XXKPI" stock with ODIN,, after that, your SGFit will be fine... You can flash other rom qfter you flash the original rom..
Good Luck!..
Sent from my GT-S5670 using xda premium
I installed stock ROM S5670XWKTI. After, I installed CWM. Via CWM I can install customize ROM, but I do not want a custom ROM than the stock ROM. All custom ROM have bugs. For me the most stable stock ROM. For example. for me on the CWM not work mount / system, cash, etc.
Yesterday I tried on stock ROM install 14 toggles Galaxy Fit , but before that the CWM has to go to mount / system that does not work for me.
You cant mount system via cwm on stock rom because to mount system, it must be ext4 witch is not in stock rom.
Sent from my GT-S5670 using Tapatalk
Dude, the CWM by Tj style is for the ext4 system... and the stock rom is RFS..
You should flash the CWM by Vish coz it support the RFS system , not the Tj style vers..
Cmiiw..
Sent from my GT-S5670 using xda premium
you guys CAN install CWM v5 by tj_style in stock ROM, but it CANNOT backup stock ROM wich is RFS, if u on stock ROM and then install cwm v5 via odin and u can directly flash custom ROM via CWM
CWM by Vish coz link for download
pito2204 said:
CWM by Vish coz link for download
Click to expand...
Click to collapse
Link:
http://forum.xda-developers.com/sho...ighlight=clockworkmod+recovery+for+galaxy+fit
http://forum.xda-developers.com/showpost.php?p=24719114
I use CWM_rfs.zip that posting by pratyush.creed and it works on my Stock ROM S5670JPKT4.
googler78 said:
http://forum.xda-developers.com/showpost.php?p=24719114
I use CWM_rfs.zip that posting by pratyush.creed and it works on my Stock ROM S5670JPKT4.
Click to expand...
Click to collapse
How you used. With Odin or ...?
Please post all questions in the Q&A section.
Thread Moved
I'm facing a weird problem. I can't flash stock rom via Odin. The phone is always stuck on the Samsung screen. Tried xxlq7/xxlq9. I'm on angeeks rom. Wanted to try the blueberry sensation rom.
So for that I tried flashing xxlq9 again as recommended and faced this issue.
EDIT [FIX]
As suggested by Kartik pat i was able to successfully flash stock rom over angeeks rom
I followed the following steps:
1. Take tb for all apps [angeeks rom]
2. Restore any gingerbread backup you might have from CWM. Boot your device.
3. Flash xxlq9 via Odinv3. Boot device
4. Flash cwm4. Boot device.
5. Flash ardatdat kernel v4.0 [ensures the erase bug issue is resolved]
6. Boot System
7. Reboot into recovery. Wipe data,cache,dalvik cache.
8. Boot system and tada
If you want to flash bb rom over this then:
1. Flash the bb rom v1. Reboot.
2. Flash the bug fix zip. Reboot.
3. Flash sensation mod
P.s. this method worked for me using the gb backup and cwmv4.
Hope this helps.
EDIT 2:
As posted by vikesh....
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Sent from my GT-I9103 using xda app-developers app
Try to restore ur cwm backup of gb if u have and den flash ics
I did the same thing i was also using angeek's rom and now i m using BB
Can I restore my cwm backup over xxlq9?
Sent from my GT-I9103 using xda app-developers app
pulley06 said:
Can I restore my cwm backup over xxlq9?
Click to expand...
Click to collapse
yes you can and which ODIN version you are using for flashing better to flash using v3......
mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Sent from my GT-I9103 using xda app-developers app
vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Click to expand...
Click to collapse
i am also not sure buddy i also faced this kind of issue once then i restored to GB and flashed it again, but i flashed Mazel on Leaked ICS so i thought it was the problem ......
pulley06 said:
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Click to expand...
Click to collapse
yes buddy you are correct, you need to wipe all 3 ie data, cache & Dalvic cache..
But i feel its not mandatory to flash XXLQ9 because i use to flash on my Leaked ICS and it was working fine when i used it.....
i followed all the steps mentioned above...the phone booted to the home screen of xxlq9...flashed bb rom successfully as per cwm...but the phone is stuck on the samsung screen that comes after galaxy r appears
vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It gets stuck for like 10-15 secs but later it flashes ROM properly,
@mj whats wrong to do it with V1.85?
@pulley I also faced same problem yesterday, but I think that time i did not mount/unmout system so I reflashed BB again by pressing two times mount>unmount (final would be unmount/system), so just press two times, still not booting then again wipe all 3 (cache,dalvik and data)
I think there is few points we should consider while flashing BB or MAZEL2 rom if u are on ANGEEK ROM.
If anybody who sucessfully flashed Stock rom & then BB or Mazel 2 after Angeek, must come in front and give us the solution.
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
kataria.vikesh said:
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Done :good:
pulley06 said:
Done :good:
Click to expand...
Click to collapse
Great buddy. I will add this in Angeek ROM'S OP.
Sent from my GT-I9103 using xda premium
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Optional Method
on request of pulley06 posting this
I was facing same problem from yesterday, so i followed this
1. remove battery/SDcard/SIM
2. wait for 5 minutes
3. insert SIM and SD card and plug USB cable in phone and connect it with laptop/PC (DO NOT INSERT BATTERY)
4. wait for one minute and now insert battery (With USB cable connected)
5. switch on
6. flash stock ICS and reboot
5 flash CWM (I used 5.5 for BB ROM) and reboot
7 enter CWM
8 Mount/Unmount> click on Unmount/system again click same (so click two times)
9 now flash BB ROM and Reboot
10. Enter CWM and repeat step 8 and flash Sensation Theme. and reboot.
vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I hope the above post helps you :thumbup:
Sent from my GT-I9103 using xda app-developers app
vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
try flashing Stock GB through Odin.
i created back up of both nordic and austian rom (also gb)
with ardadat kernel
just restore
wipe data/ cache
and flash roms
i have no issue,
Nordic rom flashing over angeek mod rom
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Requesting OP to add this one also in his OP Post.
Vikesh.. looks good.. please add few steps as to how to make this nordic room rooted.. as you cant directly flash ardatdat kernel over it as it already full in system rom partition.. :silly:
This means if I don't have an earlier backup of ics/gb and i am on angeeks rom I can't flash any new rom...plz clarify....
Sent from my GT-I9103 using xda premium
Hi everyone,
I got problem after flashing Kernel on my I9003. I am on Slim beam v3.1 rom with signal fix kernel.
Every time, after I flash every kernel( siri, cm9 alpha 11 v3, cracker ....) in recovery, when i reboot, it stop at the Samsung screen (that one shows Samsung Galaxy S GT I9003) .for hours, and finally i need to reflash the rom through odin (becoz i cannot reboot to recovery but download mode) and restore my backup.
At the time i flash the signal fix kernel in recovery, i still get that problem. at that time luckily , loSconosciuto provided an odin version so i can flash the kernel.
Did anyone can help for solving my problem ? Thanks in advance
To revert back to previous kernel
for SIRI KERNEL
re-flash "CM10 Alpha 4" or restore your backup
for CrackerizerKernel
Download and flash "kernel-cm-10-A4-restore.zip" from here(might work for SIRI kernel-never tried)...http://forum.xda-developers.com/showthread.php?t=2029921
for ALPHA 11 Kernel
you can just flash any kernel over it
u cannot flash custom kernels like u flash custom roms.. ie once u flash any custom kernel n then if u want to try other kernel, then u hav to flash ur present rom again.. then flash kernel.
Sent from my GT-I9003 using xda app-developers app
maybe idont say it clear. everytime when i want to flash kernel, i did a clean flash from ddlf2, but i still get that problem.
Sent from my U9GT2 from moage.com using xda premium
Try xxkpe with pit file then flash ddlf2 then kernel of your choice.
You can try formatting your internal and external memory and then flash the stock rom through the custom rom with custom kernel.
Hi....
I am not from here.... Am from dhd section...
I got a galaxy R......
So I would have some questions regarding flashing and ROMs....
1. Can someone suggest some stable ics ROMs? ? Most of the ics ROMs are inactive now..... So I can't choose any...
2. Can I install 4 ext recovery?
It's simple and touch recovery too...
3. If I can't change cmw recovery what are things I should format before flashing a rom.... And where can I find the options I mean under which category in recovery...
All I see is factory reset and format cache...
Thanks in advance...
Rk.....
Sent From The Future.....
rohithksaj said:
Hi....
1. Can someone suggest some stable ics ROMs? ? Most of the ics ROMs are inactive now..... So I can't choose any...
Click to expand...
Click to collapse
Flash [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM..Most stable ICS ROM
2. Can I install 4 ext recovery?
It's simple and touch recovery too...
Click to expand...
Click to collapse
Yes. [i9103][CWM Advanced Edition] PhilZ Touch is recommended.
3. If I can't change cmw recovery what are things I should format before flashing a rom.... And where can I find the options I mean under which category in recovery...
All I see is factory reset and format cache...
Click to expand...
Click to collapse
Stock recovery doesnt come up with more options.
your need to flash any other recovery to install ROMs.
Visit this link for guidance..
Nikhil said:
Flash [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM..Most stable ICS ROM
Yes. [i9103][CWM Advanced Edition] PhilZ Touch is recommended.
Stock recovery doesnt come up with more options.
your need to flash any other recovery to install ROMs.
Visit this link for guidance..
Click to expand...
Click to collapse
thanks ...one more doubt...
am on jellybeer now.....
so all i have to do is wipe and flash right ???
what all i have to wipe ????
rohithksaj said:
thanks ...one more doubt...
am on jellybeer now.....
so all i have to do is wipe and flash right ???
what all i have to wipe ????
Click to expand...
Click to collapse
yes, you need to wipe all things first (i.e. data,system & Caches) & Then flash ICS Stock ROM first coz of stability issues.
Disturbed™ said:
yes, you need to wipe all things first (i.e. data,system & Caches) & Then flash ICS Stock ROM first coz of stability issues.
Click to expand...
Click to collapse
Please give me the link to the stock...sorry I can't find in development section.......
Thanks a lot for the reply..
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Please give me the link to the stock...sorry I can't find in development section.......
Thanks a lot for the reply..
Click to expand...
Click to collapse
Here you go..
2nd Post in [FIRMWARE] Stock Samsung Firmwares for Galaxy R
Nikhil said:
Here you go..
2nd Post in [FIRMWARE] Stock Samsung Firmwares for Galaxy R
Click to expand...
Click to collapse
Ok now all I have to do is wipe everything. Flash stock. Wipe everything flash the rom.... Right?
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Ok now all I have to do is wipe everything. Flash stock. Wipe everything flash the rom.... Right?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
yes,
follow these steps.
0. copy zip file of Rom, Gapps(if required by rom), Ardatdat's kernel into your sdcard
1. wipe data/factory reset(along with dalvik cache)
2. flash stock firmware using odin (probably you'll experience boot loop)
3. flash CWM using odin
4. flash Ardatdat's kernel
5. perform factory reset(along with dalvik cache)
6. flash rom and gapps
Done..!
Nikhil said:
yes,
follow these steps.
0. copy zip file of Rom, Gapps(if required by rom), Ardatdat's kernel into your sdcard
1. wipe data/factory reset(along with dalvik cache)
2. flash stock firmware using odin (probably you'll experience boot loop)
3. flash CWM using odin
4. flash Ardatdat's kernel
5. perform factory reset(along with dalvik cache)
6. flash rom and gapps
Done..!
Click to expand...
Click to collapse
ok....thanks......
what happens if i skip the flashing stock step...i mean if i flash directly from jellybeer to the frankenstains mod by only doing factory reset and wiping caches ?????
And wiping caches and factory reset will do everything? Don't we have to wipe system and other things.?
And I don't like touch wiz... So can u please suggest a stable ics rom that runs without touch wiz?
I checked cyanogen... But no stable rc releases for this device.....
Thanks in advance...
rohithksaj said:
what happens if i skip the flashing stock step...i mean if i flash directly from jellybeer to the frankenstains mod by only doing factory reset and wiping caches ?????
And I don't like touch wiz... So can u please suggest a stable ics rom that runs without touch wiz?
I checked cyanogen... But no stable rc releases for this device.....
Click to expand...
Click to collapse
Yes, above steps are just to be on safe side. You can install frankenstains mod after factory reset and wiping dalvik caches and skip mentioned step..
I thought you wanted stock ics.
AFAIK there isnt any stable custom ics rom. for stable rom you need to adjust with touchwiz only.
You can always install a custom launcher, like Nova or Apex which give a pure AOSP feel.
Nikhil said:
Yes, above steps are just to be on safe side. You can install frankenstains mod after factory reset and wiping dalvik caches and skip mentioned step..
I thought you wanted stock ics.
AFAIK there isnt any stable custom ics rom. for stable rom you need to adjust with touchwiz only.
Click to expand...
Click to collapse
ok....so this is what i am going to do as you said...
full wipe....
Install stock ics using odin....
Flash CWM using odin
Download the ZIp
Flash it using CWM.
isnt it ???
i understood how to flash the rom via odin but not recovery...
tell me how......
Adam77Root said:
You can always install a custom launcher, like Nova or Apex which give a pure AOSP feel.
Click to expand...
Click to collapse
i know...but it will make 2 launchers ....Touch wiz and the Apex....it irritates me a bit....
rohithksaj said:
ok....so this is what i am going to do as you said...
full wipe....
Install stock ics using odin....
Flash CWM using odin
Download the ZIp
Flash it using CWM.
isnt it ???
Click to expand...
Click to collapse
not exactly, first you need to download the zip file of ardatdat kernel and custom rom you want to flash and keep it into sdcard before performing any steps as mentioned 0th step in this post and then flash stock ics
i understood how to flash the rom via odin but not recovery...
tell me how......
Click to expand...
Click to collapse
after flashing CWM (say v4.0.0.2) you will get an option "install zip from sdcard" in recovery mode(hope you know the key combination to enter into recovery mode) click on it and browse to the directory in which you kept kernel and rom
click on zip file of kernel and flash it
same way install rom.
hope you are clear now..
i know...but it will make 2 launchers ....Touch wiz and the Apex....it irritates me a bit....
Click to expand...
Click to collapse
you can set any launcher to default, touchwiz launcher wont interrupt again!
Nikhil said:
not exactly, first you need to download the zip file of ardatdat kernel and custom rom you want to flash and keep it into sdcard before performing any steps as mentioned 0th step in this post and then flash stock ics
after flashing CWM (say v4.0.0.2) you will get an option "install zip from sdcard" in recovery mode(hope you know the key combination to enter into recovery mode) click on it and browse to the directory in which you kept kernel and rom
click on zip file of kernel and flash it
same way install rom.
hope you are clear now..
you can set any launcher to default, touchwiz launcher wont interrupt again!
Click to expand...
Click to collapse
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
rohithksaj said:
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
Click to expand...
Click to collapse
Settings -> Language & Inputs -> change it to English (Just go by the icons)....
rohithksaj said:
one more problem
i installed [ROM] [4.0.4] [ZCLPD] Angeeks_I9103+A6900_Lv5_4.0.4 ROM
but its chinese....
how to change the language ??
Click to expand...
Click to collapse
Follow the icon of Language and Input and click on language, select English then..
Done....
Anyway to remove the Chinese comment while making the call?
Sent from my GT-I9103 using xda app-developers app
rohithksaj said:
Done....
Anyway to remove the Chinese comment while making the call?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Delete the CC app.
Adam77Root said:
Delete the CC app.
Click to expand...
Click to collapse
Done... Everything is going nice and easy...
Thanks all for your support and replies......
:thumbup::thumbup::thumbup:
Sent from the future........