Database Info

Problems flashing ddtk3

I have cm7.2 rc0 that I flash on cm 7.2 rc5.5 that I directly flashed on ddtk3(without actually using it even once) that I flashed over stock gb 2.3.4 . Now I used Odin and wiped cache /data on the stock recovery (as well as cwm) but the phone still goes into boot loop. I want the stock rom but can't install it. Help!
Also how to root it? Don't want to use rajrocks deoxed thing cause I don't like the colour scheme and stuff.
Thanks

itworks awsome

May be you Can try this on your own risk
The stock rom links are also available there
http://forum.xda-developers.com/showpost.php?p=23324199&postcount=1

Thanks I'll try that but I really don't think it's a problem with the rom.
Sent from my GT-S5670 using xda premium

u have to use it ddkt3 for sometime

Try to flash the stoc rom via odin, search youtube for tutorial flashing via odin

Cant flash ROM

Hello
Yesterday my phone got broken so its stuck at Bootscreen... I can even hear sound when someone sends message and i get standby animation !!
Also makes haptic feedback when boot normally finished...
I tried to do chache and dalvik wipe but not working. Then i wanted to flash ROM again but i cannot get past modem.bin .
Anyone idea? Any way to get efs folder from phone to PC because i think its saved somewhere on the phone ?
I have to reset my download counter anyway because my phone has SoD like all 15 minutes so i gonna send to SSC.
But i have question about this:
Will void my warranty when bootloader gets downgrade from 2.1 to 2.0 ?
Will void my warranty when phone is Sim unlocked and it was locked to Hutchinson 3 before?
I had this config Mazel ROM 1.1
Ardat kernel 1.8.3
and CWM 5.5.0.4
i was just cleaning phone with SD Maid Pro and something useful was deleted i think...

Anyone helP
Now rom is full broken it says : please connect to kies

I guess you should try flashing stock Rom via Odin. I once got stuck on the boot screen while on neo rom v2.1 . Flashed my country's stock rom and everything was alright.
Hope this helps :fingerscrossed:
Sent from my GT-I9103 using xda app-developers app

pulley06 said:
I guess you should try flashing stock Rom via Odin. I once got stuck on the boot screen while on neo rom v2.1 . Flashed my country's stock rom and everything was alright.
Hope this helps :fingerscrossed:
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
I think he has already tried ODIN....
HAVE U DUDE???
One thing u can do...just reset the binary counter via usb jig... And try to reflash your country firmware via ODIN....
If no success go SSC... I think they will do the job for u in warranty.....
Sent from my GT-I9103 using xda app-developers app

[FIX] Flashing Stock Rom/Custom ROM over Angeeks ROM

I'm facing a weird problem. I can't flash stock rom via Odin. The phone is always stuck on the Samsung screen. Tried xxlq7/xxlq9. I'm on angeeks rom. Wanted to try the blueberry sensation rom.
So for that I tried flashing xxlq9 again as recommended and faced this issue.
EDIT [FIX]
As suggested by Kartik pat i was able to successfully flash stock rom over angeeks rom
I followed the following steps:
1. Take tb for all apps [angeeks rom]
2. Restore any gingerbread backup you might have from CWM. Boot your device.
3. Flash xxlq9 via Odinv3. Boot device
4. Flash cwm4. Boot device.
5. Flash ardatdat kernel v4.0 [ensures the erase bug issue is resolved]
6. Boot System
7. Reboot into recovery. Wipe data,cache,dalvik cache.
8. Boot system and tada
If you want to flash bb rom over this then:
1. Flash the bb rom v1. Reboot.
2. Flash the bug fix zip. Reboot.
3. Flash sensation mod
P.s. this method worked for me using the gb backup and cwmv4.
Hope this helps.
EDIT 2:
As posted by vikesh....
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Sent from my GT-I9103 using xda app-developers app

Try to restore ur cwm backup of gb if u have and den flash ics
I did the same thing i was also using angeek's rom and now i m using BB

Can I restore my cwm backup over xxlq9?
Sent from my GT-I9103 using xda app-developers app

pulley06 said:
Can I restore my cwm backup over xxlq9?
Click to expand...
Click to collapse
yes you can and which ODIN version you are using for flashing better to flash using v3......

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2

mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Sent from my GT-I9103 using xda app-developers app

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Click to expand...
Click to collapse
i am also not sure buddy i also faced this kind of issue once then i restored to GB and flashed it again, but i flashed Mazel on Leaked ICS so i thought it was the problem ......
pulley06 said:
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Click to expand...
Click to collapse
yes buddy you are correct, you need to wipe all 3 ie data, cache & Dalvic cache..
But i feel its not mandatory to flash XXLQ9 because i use to flash on my Leaked ICS and it was working fine when i used it.....

i followed all the steps mentioned above...the phone booted to the home screen of xxlq9...flashed bb rom successfully as per cwm...but the phone is stuck on the samsung screen that comes after galaxy r appears

vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It gets stuck for like 10-15 secs but later it flashes ROM properly,
@mj whats wrong to do it with V1.85?
@pulley I also faced same problem yesterday, but I think that time i did not mount/unmout system so I reflashed BB again by pressing two times mount>unmount (final would be unmount/system), so just press two times, still not booting then again wipe all 3 (cache,dalvik and data)

I think there is few points we should consider while flashing BB or MAZEL2 rom if u are on ANGEEK ROM.
If anybody who sucessfully flashed Stock rom & then BB or Mazel 2 after Angeek, must come in front and give us the solution.
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium

kataria.vikesh said:
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Done :good:

pulley06 said:
Done :good:
Click to expand...
Click to collapse
Great buddy. I will add this in Angeek ROM'S OP.
Sent from my GT-I9103 using xda premium

I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium

Optional Method
on request of pulley06 posting this
I was facing same problem from yesterday, so i followed this
1. remove battery/SDcard/SIM
2. wait for 5 minutes
3. insert SIM and SD card and plug USB cable in phone and connect it with laptop/PC (DO NOT INSERT BATTERY)
4. wait for one minute and now insert battery (With USB cable connected)
5. switch on
6. flash stock ICS and reboot
5 flash CWM (I used 5.5 for BB ROM) and reboot
7 enter CWM
8 Mount/Unmount> click on Unmount/system again click same (so click two times)
9 now flash BB ROM and Reboot
10. Enter CWM and repeat step 8 and flash Sensation Theme. and reboot.

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I hope the above post helps you :thumbup:
Sent from my GT-I9103 using xda app-developers app

vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
try flashing Stock GB through Odin.

i created back up of both nordic and austian rom (also gb)
with ardadat kernel
just restore
wipe data/ cache
and flash roms
i have no issue,

Nordic rom flashing over angeek mod rom
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Requesting OP to add this one also in his OP Post.

Vikesh.. looks good.. please add few steps as to how to make this nordic room rooted.. as you cant directly flash ardatdat kernel over it as it already full in system rom partition.. :silly:

This means if I don't have an earlier backup of ics/gb and i am on angeeks rom I can't flash any new rom...plz clarify....
Sent from my GT-I9103 using xda premium

[Solved] [Q] Help! Can't succesfully flash roms...

Hi, I just need alot of help! I've been a rogers captivate owner for a year and i've rooted, sim unlocked, flashed many, MANY roms with success. I have also soft bricked my cappy a few times but odin restored it back to stock every time where i started over.
So basically, i soft bricked my cappy, used odin to restore to stock rogers gingerbread 2.3.3 , rooted, used odin to install corn kernel and now every time i wipe data and everything in recovery and flash a rom, it says successful but when i restart, it just gets stuck at the " samsung I896 " screen and doesn't go any further. I can't go into recovery or do anything, but i can succesfuly odin back to stock gb. I've used this same procedure many times before and it always worked but not this time. The only difference there was, was that when it got soft bricked this time, I was going from MIUI JB to Paranoid Android JB instead of ics or gb custom roms.
Can anyone please please help me out here? I really hate stock samsung roms and I LOVED JB when i had it, and i really want it back! I would really appreciate anyone's help! Thankyouuu !
[EDIT] Thankyou everyone who tried to help, i figured it out and resolved the problem, the problem was i was wiping data/factory reseting in cwm which i shouldn't have been doing.

What about using Odin to flash a kernel compatible with the Paranoid Rom, then flash the Rom through that kernel's recovery...
Sent from my SAMSUNG-SGH-I897 using xda premium

4-2ndtwin said:
What about using Odin to flash a kernel compatible with the Paranoid Rom, then flash the Rom through that kernel's recovery...
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Yeah, but paranoid android comes with its own recovery, and oh i forgot to mention, i have tried many times, and sometimes after i flash the paranoid rom, and reboot, the phone will boot but directly to recovery when i normally boot it, so i can flash the rom through its own recovery but still it just boots into recovery directly nothing else, and then i go back to stock and i've been on stock for like a month now, but im really missing paranoid androidd.

Wait i think i found the solution guys please helpp ! on stock when im about to flash the new rom, do i clear user data/ wipe data whatever it is in cwm ? Im doing that with faliure, am i not supposed to?

Cant flash any rom or using odin. Always stuck in boot animation

Hi Guys, Im on 4.1.2. Revently i flash a 4.3 mod 4 rom via odin(this rom dont update bootloader) and stuck in boot animation. Then i re flash a 4.1.2 stock rom via odin.. but didnt boot.. then i tick erase nand all.. and then flash again 4.1 then some how i manage to reboot phone. But unfortunatly efs was missing and sent to repair.. now my phone works and have imei
That was background and i dont know it awas impact for this or not. After i recive my phone i got nand backup and now when ever i flash rom via recovery or odin always stuck in the boot animation(AOSP and stock) even tried to wipe data after flashing . At onece phone got boot as normal after flashing 4.1.2 stock and again there was no Imei.. tried everthing at efs pro and xda other thread information no use.. so i revert back to nandroid backup and everything works again. So guys im stuck in 4.1.2
, befor this happen i was able to flash galaxy project 4.3 , xtream 4.3 and and all other roms without problem.. and now i cant flash anything always stuck in boot animation and cant do anthing.. tried evrything full wipes and after flashing data wipes etc.. but no use.. even i cant flash odian stock roms.. it always stuck in bootanimation...im stuck to this nandroid backup please guys help me. I want to flash roms as i was before..
Sent from my GT-I9305 using xda app-developers app

Reboot to recovery, Wipe cache.

I did it no use...

What about sending it for repair again, then when it comes back do a nandroid restore of your data only (not system and other partitions), see whether that works.
Off topic: This should be in Q&A?
Sent from my GT-I9305 using Tapatalk

Oha im sry I got crzy because to this prob ill re write thread in q and a.
Sent from my GT-I9305 using xda app-developers app

Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked

AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked
Click to expand...
Click to collapse
Well I try this.. I was so upset because of this problem.. ill check and tell you mate.. did u also wipe internal sd ?
Sent from my GT-I9305 using xda app-developers app

AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked
Click to expand...
Click to collapse
Man you are a hero thank you very much... now my phone working.... love you man....
Sent from my GT-I9305 using xda app-developers app

1Ishara said:
Man you are a hero thank you very much... now my phone working.... love you man....
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Took me a more then a month to solve this

AMoizK said:
Took me a more then a month to solve this
Click to expand...
Click to collapse
Yes bro I was very upset and I gave up every hope.. I thougt Ill stuck in 4.1... but you save me... thanks bro thanks lot... no words to say...
Sent from my GT-I9305 using xda app-developers app