Related
Fusion Kernel for the One S (S4)
Lastest Version: v1.1 (7/18/12)
This kernel is no longer supported. I have completely re-based from scratch and released a new kernel, Fusion Ultimate. Please check it out.
Thanks for all the support.
This is a kernel based off of the lastest US T-Mobile sources that just released.
It is compatible with all One S's with an S4 processor.
*Disclaimer*
Code:
I am not responsible for anything that happens to your device.
By using this you are taking full responsibility blah blah blah....
...you get the point
As there are many people working on ROMs for the One S, I have decided to start maintaining a custom kernel for it. Again, this is based off of the TMOUS kernel sources that just released a few days ago. I will add more and more features to it for new releases. Note that this is only compatible with stock Sense-based ROMs, not AOSP-based ROMs like CM9 or AOKP. Maybe in the future I will create an AOSP version. Enjoy
v1.0 (Initial Release)
- Based off the T-Mobile US kernel sources
- All features from mdeejay's latest virtuous kernel
- Overclocked to 2.1Ghz by default --> use SetCpu or similar app to change
- Added SmartassV2 governor (gives extraordinary battery life and performance, look here)
- tweaked SmartassV2 frequencies for better compatibility
- insecure kernel (root in adb)
v1.1
- Fixed CPU issues from virtuous kernel (hopefully)
- Enabled init.d scripts support with busybox run-parts
- Reverted to stock GPU 2D and 3D frequencies
- CPU now default 1.5Ghz
- SmartassV2 as default governor
- make CPU1 (second core) to be online
- good battery life
Click to expand...
Click to collapse
Downloads
The zip packages are named with the date of their release.
v1.0 (boot-071712.img): http://d-h.st/vtX
v1.1 (boot-071812.zip): http://d-h.st/jsd
How to install:
Flash the zips with TWRP recovery.
Kernels will be in zips now. The reason is because some stock patch scripts from /system/etc were interfering with the CPU frequency settings, hence some the issues from Virtuous kernel. The zips flash the patch scripts as well as the kernel.
Sources
Ramdisk is here: https://github.com/klin1344/initramfs_ville
Kernel is here: https://github.com/klin1344/kernel_ville_US
Credits
Special thanks to mdeejay for his awesome work on his kernel. Also want to thank the whole dev community here. You guys are great!
reserved...
This one too.
Well well
Sent from my HTC VLE_U using xda app-developers app
Cool thanks
Sent from my HTC VLE_U using xda premium
Klin. Do you know if with this kernel there's issues controlling the CPU? Like for example down scaling the speed for both cores or having the governors activate on both cores? I've had that issue before.
Sent from my HTC VLE_U using xda premium
ickedmel said:
Klin. Do you know if with this kernel there's issues controlling the CPU? Like for example down scaling the speed for both cores or having the governors activate on both cores? I've had that issue before.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
You mean from the virtuous kernel? I'm not quite sure what you mean, since I've never had issues myself..
Could you give a more detailed explanation of the problem? I will definitely look into it.
Sent using Tapatalk
Let the kernel games begin.
Posted With Axiom One S using TapaTalk2!
klin1344 said:
You mean from the virtuous kernel? I'm not quite sure what you mean, since I've never had issues myself..
Could you give a more detailed explanation of the problem? I will definitely look into it.
Sent using Tapatalk
Click to expand...
Click to collapse
What he means is do the clock settings stick after reboot. In virtuous kernel it went back to Max from boot and the settings had to be set again.
Posted With Axiom One S using TapaTalk2!
itsmikeramsay said:
What he means is do the clock settings stick after reboot. In virtuous kernel it went back to Max from boot and the settings had to be set again.
Posted With Axiom One S using TapaTalk2!
Click to expand...
Click to collapse
That was one problem. Some people, myself included, also had an issue where the kernel settings were only applied to CPU0. CPU1 would stay at whatever the kernel's default min/max speeds were regardless of the settings in SetCPU (or any other cpu app for that matter).
njeske said:
That was one problem. Some people, myself included, also had an issue where the kernel settings were only applied to CPU0. CPU1 would stay at whatever the kernel's default min/max speeds were regardless of the settings in SetCPU (or any other cpu app for that matter).
Click to expand...
Click to collapse
Thanks yes that's what I mean.
Sent from my HTC VLE_U using xda premium
Don't use SetCPU. I use Systuner but CPU Master worked great too.
itsmikeramsay said:
What he means is do the clock settings stick after reboot. In virtuous kernel it went back to Max from boot and the settings had to be set again.
Posted With Axiom One S using TapaTalk2!
Click to expand...
Click to collapse
njeske said:
That was one problem. Some people, myself included, also had an issue where the kernel settings were only applied to CPU0. CPU1 would stay at whatever the kernel's default min/max speeds were regardless of the settings in SetCPU (or any other cpu app for that matter).
Click to expand...
Click to collapse
Okay thanks. I will do some research and testing tomorrow and look into the issue.
Sent using Tapatalk
u make aosp version now!!!!!
thanks
c19932 said:
u make aosp version now!!!!!
*Removed the useless spaces here*
thanks
Click to expand...
Click to collapse
Little bit of spam worth those spaces,don't your think? Anyway, great job OP! Will flash soon!
Sent from my HTC VLE_U using xda premium
Been waiting very impatiently for someone to pick up the new source code and made a kernel, thanks so much for your work on this. Quick question tho, is vsync still turned on? It seems to me that it is.
Sent from my HTC VLE_U using xda premium
quick question--- can this new kernel work with any rom? such as the AxiomS or the PARANOIDANDROID? and 2.1GhZ... that's maad fast, cant wait to try it! thanks
strker45 said:
Been waiting very impatiently for someone to pick up the new source code and made a kernel, thanks so much for your work on this. Quick question tho, is vsync still turned on? It seems to me that it is.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
If it was in virtuous kernel, then it is here. I haven't gone through to change some of the stuff from virtuous kernel yet.
marokkino13 said:
quick question--- can this new kernel work with any rom? such as the AxiomS or the PARANOIDANDROID? and 2.1GhZ... that's maad fast, cant wait to try it! thanks
Click to expand...
Click to collapse
It will work on sense based ROMs only.
Sent using Tapatalk
confirmed multi touch issue
Sent from my HTC VLE_U using xda app-developers app
same problems of mdeejay kernel, multitouch issue, also some flickering (maybe because of vsync off)
Hi Friends,
Was Roaming around all over Tamil nadu and with my Nikon taking precedence over mobile, was away from laptop for few weeks. Now am Back with a kernel. With JB development going in photon speed, it may luk odd with a development work in ICS. But for those who are still persisting in ICS, it may matter. It is still a beta version. It has only the features that are listed below. Planning to add more features soon.Test and let me know on Battery drain, Performance and Deep sleep.
Features:
Based on Samsung ICS Update 2 Source
eMMC brick bug disabled
Pre-rooted
Overclocked - Currently added 1.2 Ghz alone
RAM Hack - Thanks to Adi_Pat
Governors - Conservative, Interactive and Performance
Schedulers - Noop, Deadline and CFQ
BLN Support with liblights - Thanks to Adam77Root
Custom Boot Animation Supported
Few Ramdisk tweaks
Auto-brightness fix - Thanks to Ardatdat
Voodoo sound patch
Download - Dropbox
Features working on:
Intermediate frequencies for OC
Custom Voltage
Memory Management and Misc tweaks
Kernel Source - Github
reserved
Is this exclusive for mazel rom?
Or can we use this in stock ics?
Just flashed the kernel. For some reason unable to use WiFi. Not being detected. Initial reactions: pretty smooth. I'm on bb rom. Will test for a while and update.
Sent from my GT-I9103 using xda app-developers app
drarunmmc said:
Is this exclusive for mazel rom?
Or can we use this in stock ics?
Click to expand...
Click to collapse
it can be used on any ice based rom:screwy:
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
---------- Post added at 07:40 AM ---------- Previous post was at 07:33 AM ----------
buddy I used ur kernel , but the battery life is terrible,
I think it is because of oc , I set it to 1ghz but for some reason it stays in 1.2ghz, I checked in CPU spy...
so my suggestion is to delete the oc because no one is using it
although with this kernel the phone runs very smooth and snappy
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
Thank you selva for the effort buddy:beer: so
used the kernel for a while.
Pros
1. Deep sleep perfect
2. Zero game lag. Tried with Subway surfers
3. Silky smooth
Cons
1. WiFi not working/connecting even after wiping cache/dalvik.
As I don't have much 2g data left for this month reverting back to ardatdat beta 6.
Sent from my GT-I9103 using xda app-developers app
@amar I set the set cpu to 1ghz only and rebooted buddy. It did not go to 1.2
Sent from my GT-I9103 using xda app-developers app
I used rom toolbox before and now I use set CPU everything is fine now and I also try temple run no glitches whatsoever
btw Selva buddy can u release two kernels one with oc and the other without oc......
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
amar1548 said:
buddy I used ur kernel , but the battery life is terrible,
I think it is because of oc , I set it to 1ghz but for some reason it stays in 1.2ghz, I checked in CPU spy...
so my suggestion is to delete the oc because no one is using it
although with this kernel the phone runs very smooth and snappy
Click to expand...
Click to collapse
amar1548 said:
I used rom toolbox before and now I use set CPU everything is fine now and I also try temple run no glitches whatsoever
btw Selva buddy can u release two kernels one with oc and the other without oc......
Click to expand...
Click to collapse
Battery Life, yes it may be terrible as its only beta version. Its not because of OC. Its because i have not included all the tweaks needed for battery life. Still its in testing stage. Reason for including OC and having only 1.2 ghz is to test whether its preventing the game lag. Generally when i OC with limits and intermediate ranges as 1.1, 1.2 and 1.3, mostly the mobile clock in 1.1 ghz and very rarely going to 1.2 ghz. So i skipped 1.1 and included only 1.2 ghz.. Just a testing.
Will you add BFQ scheduler at a later stage? I have good experience with that and have been using it since I moved permanently to CM.
Sent from my CM10-powered GT-I9103
Adam77Root said:
Will you add BFQ scheduler at a later stage? I have good experience with that and have been using it since I moved permanently to CM.
Sent from my CM10-powered GT-I9103
Click to expand...
Click to collapse
Have not thought about it. Will check on it once im done with other basic stuffs. Surely will get in touch with u when including the scheduler.
MaZel Kernel v1.0 Beta-2
MaZel Kernel Beta-2 has been uploaded in dropbox.
Features added:
Auto Brightness fix
Voodoo Sound patch
Few tweaks
Please test and let me know guys.
Regarding the annoying lags and freezes in ICS, could this kernel for the Galaxy Tab 2 10.1 be of any help : http://forum.xda-developers.com/show....php?t=1950052 ?
dragosh01x said:
Regarding the annoying lags and freezes in ICS, could this kernel for the Galaxy Tab 2 10.1 be of any help : http://forum.xda-developers.com/show....php?t=1950052 ?
Click to expand...
Click to collapse
Problem with the link u provided buddy...Returns 404....few users reported that with this kernel, they didn't get lags...You can try and let us know..
selva.simple said:
Problem with the link u provided buddy...Returns 404....few users reported that with this kernel, they didn't get lags...You can try and let us know..
Click to expand...
Click to collapse
Let's try again : http://forum.xda-developers.com/showthread.php?t=1950052 - it's a "fixed" kernel by codeworkx for the Galaxy Tab 2 10.1, my other device, which also had serious lags and freezes in ICS as our Galaxy R. Hope there is magic you can add from that to your kernel.
Ok now..included intermediate freq of 1100 and then the BFQ scheduler as suggested by Adam. Getting few compiler errors for BFQ. Will check it tomorrow.
And finally setup the environment for AOSP build. As Ubuntu 12.04 was not supporting all the branches to do AOSP build (though its gud for kernels), now setup a diff environment using 10.04. Will Start init/sync tomorrow.
Nice work buddy! You can spare a lot of upload bandwidth by adding a '.gitignore' file. It tells git to ignore the specified files so they will not be pushed. Get one (specified for kernels) here: https://github.com/Adam77Root/android_kernel_samsung_i9103/blob/jellybean/.gitignore
Adam77Root said:
Nice work buddy! You can spare a lot of upload bandwidth by adding a '.gitignore' file. It tells git to ignore the specified files so they will not be pushed. Get one (specified for kernels) here: https://github.com/Adam77Root/android_kernel_samsung_i9103/blob/jellybean/.gitignore
Click to expand...
Click to collapse
Thanks a lot buddy. I surely need tat because of my poor data bandwidth.
Testers needed for CM10 kernel
Friends,
Need some testers for a new CM10 kernel. I have not even tried it as im doing some testing with ICS kernel in my device. So those who are about to test, have a back-up and then test this kernel. No special features added yet. Just wanna check whether its boots-up in cm10.
Link - MaZel CM10 Kernel
Sooo...did you find anything useful in that blamesamsung kernel : http://forum.xda-developers.com/showthread.php?t=1950052 ?
Hello!
Are you on cm10 or any cm10 based ROMs? Is your phone rather fast? I am on Jellybam v 4.1 and i've used it for some days now. (it's the longer I ever stayed with it) and I am planning to use it as my daily driver but after installing a few apps and so the phone gets very slow.
What performance improvents and configs that works are you guys using and does it speed it up? Maybe I am the only one feeling this though :angel: .
This can also be a thread with tweaks, improvements, benchmark posts etc.
Also, how can I increase my RAM with Swap? I know how to partition but not how to activate it.
Btw I can not flash another kernel as I am on wkparks v25a and if I do that I will end up in a recovery loop!
Thank You!
Well I myself am using the lagfix app from the play store on the latest cm 10 nightly. The app works and it's not placebo. The speed increase is most noticable in launching apps.
If anyone else tested the app please share your experience.
Sent from my LG-P920 using xda app-developers app
Here's a few of my settings:
On performance settings I changed CPU governor to hotplug, then I/O scheduler to CFQ then zRam to 26% and finally enabled kernel samepage merging.
All this on performance settings from CM10 I also can't flash other kernels because I'm using bernis dual-boot... anyway seems better on performance no freezes only battery drains a bit faster but I guess that's a cm problem.
Sent from my LG-P920 using xda app-developers app
Sv: CM10 small tweaks and RAM. Post your setups!
Well there is the problem with the fps locking at a point on cm10 based ROMs. Iblueminds 4.2 doesnt have that so I am going to flash that tonight
Sent from my 3D phone.
Guys if you want to flash another kernel or ROM on wkparks 1.25a you have to
1. Downgrade to a u-boot lower than 1.24 with fastboot
2. Go into recovery and flash your ROM/kernel
3. Flah the 1.25a with fastboot and it should boot up fine.
This way you won't end up in recovery loop
:good:
cK3n said:
Here's a few of my settings:
On performance settings I changed CPU governor to hotplug, then I/O scheduler to CFQ then zRam to 26% and finally enabled kernel samepage merging.
All this on performance settings from CM10 I also can't flash other kernels because I'm using bernis dual-boot... anyway seems better on performance no freezes only battery drains a bit faster but I guess that's a cm problem.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
I use the same settings. As well i use the Bluekernel II from iBluemind and i downclocked the maximum frequency to 800mhz and the minimun to 196mhz for a better battery life. It's enough for my daily use without any lags and freezes, but i don't play games on the phone
Sv: CM10 small tweaks and RAM. Post your setups!
This is the best combination I think so far:
Odex system and framework. Create a 64mb swapfile on either the system or data partition and set swappiness to 85. This makes all my cm10 and cm10.1 roms smooth and fast. On stock cm kernel too.
Sent from my 3D phone.
Anyone who knows about of kernel for p3100 other than blackhawk. Works fine but heats my device.
Thanks in advance.
Sent from my GT-P3100 using xda app-developers app
OCing will overheat your device, cuz you are making the CPU do more than what it is supposed to do.
It ain't the kernel. Don't OC, if you can't handle the heat.
All current overclock/undervoltage enable kernel around here based on blackhawk's patch, ported from cmenard's 3.0.8 kernel source code for AOKP.
Thanks.
How about the 3.0.39 dhollmen kernel, it does not heat my device as much..
Sent from my GT-P3100 using xda app-developers app
vehvariya said:
Thanks.
How about the 3.0.39 dhollmen kernel, it does not heat my device as much..
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I'd give the AGNI PureCM/PureStock kernel a shot, its my preferred kernel at the moment, use whichever depending if your device is on stock based firmware and CM version if you're on a CM based rom, bundled with it is the Boeffla Config app, in this app you can adjust your core voltage, (if the undervolt settings here arent good enough, you can get an app like SetCPU to do it in) , also, you can set the GPU OC while you're at it, i run 1350mhz on my CPU and 512mhz on my gpu, smooth and snappy, hardy heats up, works like a charm, you might like it!
B14CKB1RDKernel for the Samsung Relay 4G
B14CKB1RD is a custom kernel meant for 4.4 KitKat based Roms that comes with the freedom of user voltage control as well as Under Voltage Control. There is 8 governors and 8 i/o schedulers. It's built with the 4.10 sabermod toolchain and -o3 compiled for best optimizations and performance. It comes fully stable and suitable for what uses you want from your phone. From best battery life to best performance you can find for your phone on any 4.4 KitKat rom available. As usual happy flashing. Just note i am not responsible if you the user messes up your phone. I will always be around to help in any way i can so if any issues arise please feel free to send me a pm before trolling.
Downloads:
v2.3 For REV3NT3CH Roms (wont work on roms built prior to 7/13/14):
Download: Click Here!
v1.3 For REV3NT3CH Roms (for my rom builds released prior to 7/13/14):
Download: Click Here!
For TeamApexQ Roms:
Temporarily pulled down for development reasons..new link will be available soon
How to Install:
Boot to recovery
Wipe Cache
Wipe Dalvik Cache
Flash Kernel .zip
Reboot to profit
v2.0 Features:
Governors:
Abyssplugv2
Interactive
Ondemand
Optimax
Performance
Smartmax
Uberdemand
Wheatley
I/O Schedulers:
Bfq
Cfq
Deadline
Noop
Row
Sio
SioPlus
Zen
TCP Congestion Controls:
Bic
Cubic
Highspeed
Htcp
Hybla
Illinois
Lp
Reno
Scalable
Vegas
Veno
Westwood
Yeah
Other:
Linux Kernel 3.4.104
CPU Overclock up to 1620mhz
GPU Overclock up to 480mhz
UnderVoltage Control
Governor Tuning
Fast Charge
Source:
click here
Credits & Thanks
@Snuzzo (for teaching me all he knows about kernel)
@falle21 (for beta testing)
TeamApexQ (for their hard work on the Relay)
All the other developers who contribute to the D2 kernel upstream
Changlog 9/27/14
1.)Kernel updated to linux upstream version 3.4.104 straight from kernel.org and to B14CKB1RD v2.3
2.) Added Fast Charge support
3.) Added Optimax Governor and removed unneccesary ones
4.) Did various other fixes in source
As usual my personal preference is Wheatley Governor and SIO I/O scheduler as i get great performance and battery life with it
Awesome!! Thanks for your work. Great battery and performance with this kernel in liquid, carbon and omni! Thanks for do it
Sent from my SGH-T699 using XDA Premium 4 mobile app
Which one do I need for cm11, is it TeamApexQ Roms ?
Can you rename the files to see a difference ?
I can't vouch for which one cm11 will use as its kernel varies between both...what happens is between my ROMs and omni/fat toad is graphical tearing...if one of these 2 causes this said tearing then try the other...I'd say try using TeamApexQ version first...
Sent from my L1QU1D R3L4Y using xda-developers app
Thanks @smartt699 for your generous donation. Its greatly appreciated and will help the family
Sent from my L1QU1D R3L4Y using xda-developers app
Thanks for your efforts! Here's the last_kmsg from a reboot today of this kernel flashed atop your latest Carbon ROM. Hope it helps.
reaper000 said:
Thanks for your efforts! Here's the last_kmsg from a reboot today of this kernel flashed atop your latest Carbon ROM. Hope it helps.
Click to expand...
Click to collapse
Is there an app you use that accesses system files...such as WiFi related...especially one with a lot of ads...or anything...certain themes may also cause reboots as well as using certain kernel tweaking tools
Sent from my L1QU1D R3L4Y using xda-developers app
REV3NT3CH said:
Is there an app you use that accesses system files...such as WiFi related...especially one with a lot of ads...or anything...certain themes may also cause reboots as well as using certain kernel tweaking tools
Sent from my L1QU1D R3L4Y using xda-developers app
Click to expand...
Click to collapse
Notice reboots typically occur when accessing data (Internet) but not only Wi-Fi. No games, just Googling something. Also, using no themes. Did use trickster mod to set up your recommendation of sio/Wheatley, but that's it.
Sent from my Nexus 5 using Tapatalk
reaper000 said:
Notice reboots typically occur when accessing data (Internet) but not only Wi-Fi. No games, just Googling something. Also, using no themes. Did use trickster mod to set up your recommendation of sio/Wheatley, but that's it.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
That's most likely the reason you get reboots...trickstermod is a known issue on a few devices....you can actually set governer and i/o scheduler under performance settings itself....unfortunately there no known fix even if you uninstalled the app except for clean wiping....I do not use any tweaking apps and have yet to get any reboots
Sent from my L1QU1D R3L4Y using xda-developers app
REV3NT3CH said:
That's most likely the reason you get reboots...trickstermod is a known issue on a few devices....you can actually set governer and i/o scheduler under performance settings itself....unfortunately there no known fix even if you uninstalled the app except for clean wiping....I do not use any tweaking apps and have yet to get any reboots
Sent from my L1QU1D R3L4Y using xda-developers app
Click to expand...
Click to collapse
I also have trickster mod along with pimp my rom, and a few others. I have also experienced some reboots until I put min at 1350 and max at 1512 and performance gov and io scheduler row. To do a "clean wipe" does this mean a full factory reset. I hope not. That is just something I am not going to do. That's why I'm still on carbon and not on the liquid rom.
Sent from my SGH-T699 using XDA Premium 4 mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 03:15 AM ----------
chuckiev79 said:
I also have trickster mod along with pimp my rom, and a few others. I have also experienced some reboots until I put min at 1350 and max at 1512 and performance gov and io scheduler row. To do a "clean wipe" does this mean a full factory reset. I hope not. That is just something I am not going to do. That's why I'm still on carbon and not on the liquid rom.
Sent from my SGH-T699 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If I uninstalled these apps and reinstalled the rom and kernel after would that be enough to get the kernel to work as it should?
Sent from my SGH-T699 using XDA Premium 4 mobile app
chuckiev79 said:
I also have trickster mod along with pimp my rom, and a few others. I have also experienced some reboots until I put min at 1350 and max at 1512 and performance gov and io scheduler row. To do a "clean wipe" does this mean a full factory reset. I hope not. That is just something I am not going to do. That's why I'm still on carbon and not on the liquid rom.
Sent from my SGH-T699 using XDA Premium 4 mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 03:15 AM ----------
If I uninstalled these apps and reinstalled the rom and kernel after would that be enough to get the kernel to work as it should?
Sent from my SGH-T699 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i suppose a uninstall of trickster mod AND pimp my rom and a dalvik wipe and cache wipe then do a dirty flash of rom and then do the kernel same method will work...but curious as to why use outdated and unsupported apps like this when it has it built into the rom itself....im not intending to come off negative but this app and kernel tuner has been widely known since jellybean to cause reboots and even bricks of some devices. the min cpu should also NEVER be set higher than 480....thats one way to really overheat and kill battery hence why i removed the mpdec touchboost that teamapexq uses
I'd love to add some (or all) of the governors and schedulers to the stock kernel (4.1.2). Do you have a github for the source? It would be super appreciated.
REV3NT3CH said:
i suppose a uninstall of trickster mod AND pimp my rom and a dalvik wipe and cache wipe then do a dirty flash of rom and then do the kernel same method will work...but curious as to why use outdated and unsupported apps like this when it has it built into the rom itself....im not intending to come off negative but this app and kernel tuner has been widely known since jellybean to cause reboots and even bricks of some devices. the min cpu should also NEVER be set higher than 480....thats one way to really overheat and kill battery hence why i removed the mpdec touchboost that teamapexq uses
Click to expand...
Click to collapse
Interesting perspective. I've rooted and run many custom ROMs and kernels on a Galaxy Nexus, Nexus 4, HTC One m7, and Nexus 5 with Trickster Mod and have never seen that app cause random reboots if the kernel parameters are set within reason (no UV or OC). Maybe I've just been lucky, but that would be very, very lucky as that lack of reboots applies to every ROM and every kernel combination with every single device I've tried over a few years. Even though I'm selective as to what I flash, that's in the hundreds as I can flash several times a day. And all with Trickster Mod on board.
The Relay 4G just seems unduly fragile to me. I've seen it reboot more times in a week than the other devices I mentioned randomly reboot in a year. I'm certainly not blaming any dev for this (and am thankful for all the efforts put here) and want to acknowledge just how difficult it must be to squeeze these great ROMs into a device that probably wasn't designed to handle them. Again, no disrespect to the OP.
Sent from my Nexus 5 using Tapatalk
Well nexus devices are built pretty vanilla when it comes to android so its compatibility outreaches more....I've had reboots on every Motorola and HTC devices I've owned....I know for me I haven't had a reboot but I guess I'm lucky....but it could just be small incompatibilities in our code that may cause this and we just haven't found them or figured it out yet
Sent from my L1QU1D R3L4Y using xda-developers app
REV3NT3CH said:
Well nexus devices are built pretty vanilla when it comes to android so its compatibility outreaches more....I've had reboots on every Motorola and HTC devices I've owned....I know for me I haven't had a reboot but I guess I'm lucky....but it could just be small incompatibilities in our code that may cause this and we just haven't found them or figured it out yet
Sent from my L1QU1D R3L4Y using xda-developers app
Click to expand...
Click to collapse
Which is probably why, as a flashaholic, I stick to Nexi(?). My girlfriend, however, insists on a physical keyboard *sigh*.
Thanks for the ROMs and kernel; you're singlehandedly keeping this device relevant. Well, you and TeamApex.
Stop it so I can get her a new phone already...! (kidding)
Sent from my Nexus 5 using Tapatalk
reaper000 said:
Which is probably why, as a flashaholic, I stick to Nexi(?). My girlfriend, however, insists on a physical keyboard *sigh*.
Thanks for the ROMs and kernel; you're singlehandedly keeping this device relevant. Well, you and TeamApex.
Stop it so I can get her a new phone already...! (kidding)
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I would just like to add, if I may, that after uninstalling those apps I have not had any random reboots. Also on a topic unrelated, that viper4android fx app does not play well with poweramp, got rid of poweramp.
Sent from my SGH-T699 using XDA Premium 4 mobile app
chuckiev79 said:
I would just like to add, if I may, that after uninstalling those apps I have not had any random reboots. Also on a topic unrelated, that viper4android fx app does not play well with poweramp, got rid of poweramp.
Sent from my SGH-T699 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
uhhhh im using poweramp just fine....of course i had to set up sound settings within it....which i can guide you through that as well
Also...just to let people know...will be spending the rest of the week updating and further developing the kernel and various other fixes
Sent from my L1QU1D R3L4Y using xda-developers app