Database Info

[Q] smartass governor?

I am using IMoseyons 3.1.0 kernel with humble 4.22 ROM. I went to terminal emulator and turned on smartass and rebooted. tegrak told me i was running smartass. I rebooted again, and i was back to ondemand.
How do i get smartass to stick?
Sent from my HUMBLE by Danalo1979 using XDA App

JihadSquad said:
I am using IMoseyons 3.1.0 kernel with humble 4.22 ROM. I went to terminal emulator and turned on smartass and rebooted. tegrak told me i was running smartass. I rebooted again, and i was back to ondemand.
How do i get smartass to stick?
Sent from my HUMBLE by Danalo1979 using XDA App
Click to expand...
Click to collapse
If you're using the free version of Tegrak, your settings will not stick when you reboot. You have to have to the paid version to be able to "set on boot."

spc_hicks09 said:
If you're using the free version of Tegrak, your settings will not stick when you reboot. You have to have to the paid version to be able to "set on boot."
Click to expand...
Click to collapse
So there is nothing I can do to the kernel to make it stick?

JihadSquad said:
So there is nothing I can do to the kernel to make it stick?
Click to expand...
Click to collapse
Honestly I have no idea.

spc_hicks09 said:
If you're using the free version of Tegrak, your settings will not stick when you reboot. You have to have to the paid version to be able to "set on boot."
Click to expand...
Click to collapse
Wrong. On Imoseyon's kernel there's a command you can use to permanently use Smartass on startup. Look around for it in the thread. That, or you can modify the starting script for the kernel, but I have no idea where it's located.
Sent from my Droid Charge running Infinity Beta

Go Into terminal emulator...type "su" then enter, then type " enable smartass" then enter.
Reboot your phone and you should be fine.
Sent from my VooDoo Gummy Charge

kvswim said:
Wrong. On Imoseyon's kernel there's a command you can use to permanently use Smartass on startup. Look around for it in the thread. That, or you can modify the starting script for the kernel, but I have no idea where it's located.
Sent from my Droid Charge running Infinity Beta
Click to expand...
Click to collapse
Uhh I'm not wrong. To begin with, he was asking about the APP, in which I said "the app won't keep the settings if he's using the free version." THEN when he asked if there was anything he could do to the KERNEL, I said I didn't know.

My device is incompatible with this rom when I try and download emulator.
Nevermind.

Does anyone has the link to this rom can't find it anyware or just a clean mirror ?
Sent from my SPH-D700 using xda premium

bfitzpatrickd2d said:
Does anyone has the link to this rom can't find it anyware or just a clean mirror ?
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Which ROM?

spc_hicks09 said:
Uhh I'm not wrong. To begin with, he was asking about the APP, in which I said "the app won't keep the settings if he's using the free version." THEN when he asked if there was anything he could do to the KERNEL, I said I didn't know.
Click to expand...
Click to collapse
...no he's not. Read the OP.
Sent from my Droid Charge running Infinity Beta

Humble 4.22
Sent from my SPH-D700 using xda premium

kvswim said:
...no he's not. Read the OP.
Sent from my Droid Charge running Infinity Beta
Click to expand...
Click to collapse
So you mean this part?
JihadSquad said:
I am using IMoseyons 3.1.0 kernel with humble 4.22 ROM. I went to terminal emulator and turned on smartass and rebooted. tegrak told me i was running smartass. I rebooted again, and i was back to ondemand.
How do i get smartass to stick?
Click to expand...
Click to collapse
Ok, went back and read the OP. Still the same conclusion. He was asking about the app. I told him you can't do it with the APP. Therefore I answered his question. When he asked, "is there anything I can do with the kernel?" I said "I don't know."
Once again, I was NOT wrong. You can argue your point all you want but I'm done arguing with you.

[MOD] CPU Editor - Die Hard Battery

This mod will work on snapdragon devices.
See the main thread here: http://forum.xda-developers.com/showthread.php?t=1798765
Please post comments and questions there.
Sent from my SAMSUNG-SGH-I747 using xda premium

Thanks buck-o, but it appears we already seen a version of this known as 'Dual Core Mod'. Seems a bit different, will try now.

Think I'll be giving this a try with the fusion kernel see how that works out.
Sent from my HTC VLE_U using xda premium

Sweet !!! checking it now on trickdroid ...
Thanks !!:good:

ickedmel said:
Think I'll be giving this a try with the fusion kernel see how that works out.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
Please do!. If you give it 2 thumbs up with that combo ill be a flashing away. Awaiting your verdict!
Sent from my HTC VLE_U using Tapatalk 2

I've been using this since I got my one s and Orical told me about this.
This is epic guys, genius mod.
Sent from my HTC VLE_U using Tapatalk 2
I recommend trying this with stock. I am currently on fusion kernel, my settings don't stick, and well we all know the kernel isn't 100% yet so let's not judge the kernel or the mod .

i cannot acces governor for cpu0 and 1, same for i/o scheduler
just a bunch of numbers appearing
everything else is accessable and i applied battery save profile for ondemad governor, so i still have to see how it improves the battery life

Gaba90 said:
i cannot acces governor for cpu0 and 1, same for i/o scheduler
just a bunch of numbers appearing
everything else is accessable and i applied battery save profile for ondemad governor, so i still have to see how it improves the battery life
Click to expand...
Click to collapse
I'm having this same problem. Flashed the start_stop_daemon and it still doesn't work.

Looks great! I'm about to try.

What is this start/stop daemon? Is it necessary?
Sent from my HTC One S using xda premium

ShensMobile said:
I'm having this same problem. Flashed the start_stop_daemon and it still doesn't work.
Click to expand...
Click to collapse
You need to install busybox 1.19.3 the latest doesn't have it. After you do though fix permissions. And yes it won't work without it.
Sent from my HTC VLE_U using xda premium

Orical said:
You need to install busybox 1.19.3 the latest doesn't have it. After you do though fix permissions. And yes it won't work without it.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
I'm on Trickdroid v7.0.0 which should have the latest busybox. Are you saying I should install the newest busybox from market?

Can anyone confirm if this has a smart script that turns off CPU1 and underclocks both CPUs when screen is off?

ShensMobile said:
I'm on Trickdroid v7.0.0 which should have the latest busybox. Are you saying I should install the newest busybox from market?
Click to expand...
Click to collapse
No the latest is 2.0 something, use the 1.19.3 version because the latest doesn't have start-stop-daemon included.
Sent from my HTC VLE_U using xda premium

Closed Source Project said:
Can anyone confirm if this has a smart script that turns off CPU1 and underclocks both CPUs when screen is off?
Click to expand...
Click to collapse
Yes it puts it to the lowest state when screen is off by default, unless you change the profile off and set both min max high it will always knock it down.
Sent from my HTC VLE_U using xda premium

Closed Source Project said:
Can anyone confirm if this has a smart script that turns off CPU1 and underclocks both CPUs when screen is off?
Click to expand...
Click to collapse
No it does not, when using ondemand governor it adjusts the cpus when necessary. When cpu1 is needed it comes online, kinda makes the cpu1 off while sleeping unnecessary. I am thinking about adding the underclocking while the screen is off and while the phone is in use for a future releases. But this script doesnt use screen off to do anything.

Orical said:
No the latest is 2.0 something, use the 1.19.3 version because the latest doesn't have start-stop-daemon included.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
Where do I get the 1.19.3 version?
And do I need to reflash the start-stop-daemon again?

ShensMobile said:
Where do I get the 1.19.3 version?
And do I need to reflash the start-stop-daemon again?
Click to expand...
Click to collapse
Download busybox installer from play store.
Sent from my One S

luddeblaesild said:
Download busybox installer from play store.
Sent from my One S
Click to expand...
Click to collapse
Thank you I already started installing 1.19.3.
Nevermind, it's all working now Thanks guys!
Now to test it out... I'll let you guys know how it is

alright i also got it working now thanks to busybox 1.19.3
what´s the standard set for scheduler on the stock kernel? don´t want to change if i dont know how to change back
also noticed just now that changing max freq of cpu1 does not work

my g2x keeps freezing

My g2x is GB rooted and it keeps freezing! for example I play any games on it and it freezes or i get mulitple txt and it freezes. also any type of browser that I use( dolphin, maxthon, fast, chrome, etc) the will work for a while but it also freezes or if i go to any website like facebook or even google it takes a great while for it to load up! I have full bars and excellent 4G. I should mention that I have the app setcpu almost at max speed thinking the phone wont freeze but it still does.... any suggestion to make the phone not freeze and faster web load like in the past ? thank you for your time

Georican said:
My g2x is GB rooted and it keeps freezing! for example I play any games on it and it freezes or i get mulitple txt and it freezes. also any type of browser that I use( dolphin, maxthon, fast, chrome, etc) the will work for a while but it also freezes or if i go to any website like facebook or even google it takes a great while for it to load up! I have full bars and excellent 4G. I should mention that I have the app setcpu almost at max speed thinking the phone wont freeze but it still does.... any suggestion to make the phone not freeze and faster web load like in the past ? thank you for your time
Click to expand...
Click to collapse
What ROM are you running? And Kernel?
Sent from my LG-P999 using xda app-developers app

russell956956 said:
What ROM are you running? And Kernel?
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Rom 2.3.3 rooted and kernel 2.6.32.9

Are you undervolting with set CPU? That could be the culprit. Set everything back to stock and see if the problem persists
Sent from my LG-P999 using xda premium

rtotheichie said:
Are you undervolting with set CPU? That could be the culprit. Set everything back to stock and see if the problem persists
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Im very nood at this stuff, do you mean do a factory reset ? and undervolting ?

Georican said:
Im very nood at this stuff, do you mean do a factory reset ? and undervolting ?
Click to expand...
Click to collapse
no, I think he meant for you to set the cpu run at stock speed and then see if you still have the same problem.

2am said:
no, I think he meant for you to set the cpu run at stock speed and then see if you still have the same problem.
Click to expand...
Click to collapse
i know its goin to sound stupid but how do i run it at stock speed? in setcpu?

Georican said:
i know its goin to sound stupid but how do i run it at stock speed? in setcpu?
Click to expand...
Click to collapse
Are you using any apps like setcpu, pimpmycpu, antutu? If not, you are already on stock voltage.
If you are familiar with flashing, flash others GB roms from the dev area. See if it still crashes.

cricketAC said:
Are you using any apps like setcpu, pimpmycpu, antutu? If not, you are already on stock voltage.
If you are familiar with flashing, flash others GB roms from the dev area. See if it still crashes.
Click to expand...
Click to collapse
im using the app setcpu because before my phone started to freeze after installing setcpu my phone was working great for a long time until now recently that my phone has started to freeze so much. So i must flash with another rom ? or should i unistall setcpu?

Georican said:
im using the app setcpu because before my phone started to freeze after installing setcpu my phone was working great for a long time until now recently that my phone has started to freeze so much. So i must flash with another rom ? or should i unistall setcpu?
Click to expand...
Click to collapse
It could be that you need to do a factory reset on your phone and start fresh, that could probably fix your freezing problem.
Also you might also want to look into updating your phone to LG's official 2.3.4 ROM, it is much more stable than the 2.3.3 ROM that your on.
Sent from my LG-P999 using xda app-developers app

[Q] Can't overclock!

Trying to overclock, and just can't get it to take
ViperXL 3.1.0
ElementalX-1.5
1.09 Hboot
I've gone so far as to completely wipe the 'sdcard' and start from scratch. Running 'lsmod' in terminal shows that the module is loaded, and the max speed I select shows under cpu in venom tweaks. This is driving me nuts! What can I do to troubleshoot?

When you flashed elemental, what did you set as your max CPU speed?
What program are you using to check / set CPU speed?

thebobmannh said:
When you flashed elemental, what did you set as your max CPU speed?
What program are you using to check / set CPU speed?
Click to expand...
Click to collapse
I've tried 1728, 1809, & 1890. I even tried speeds lower than stock, and it still runs at factory speeds, so I'm thinking something is wrong with the oc module, but I don't know his to check. I tried using the app built into viper, setcpu, and kernel tuner. I thought they may be conflicting, and that's why I wiped and started fresh.
Sent from my Nexus 7 using Tapatalk HD

brbarnyard said:
I've tried 1728, 1809, & 1890. I even tried speeds lower than stock, and it still runs at factory speeds, so I'm thinking something is wrong with the oc module, but I don't know his to check. I tried using the app built into viper, setcpu, and kernel tuner. I thought they may be conflicting, and that's why I wiped and started fresh.
Sent from my Nexus 7 using Tapatalk HD[/QUOTE
My guess is to try, ruuing back to stock re rooting and trying again..
Click to expand...
Click to collapse

some phones just cant OC

CheesyNutz said:
some phones just cant OC
Click to expand...
Click to collapse
I'd be soooooo mad
Sent from my One X using Tapatalk 2

WhatTheAndroid? said:
brbarnyard said:
I've tried 1728, 1809, & 1890. I even tried speeds lower than stock, and it still runs at factory speeds, so I'm thinking something is wrong with the oc module, but I don't know his to check. I tried using the app built into viper, setcpu, and kernel tuner. I thought they may be conflicting, and that's why I wiped and started fresh.
Sent from my Nexus 7 using Tapatalk HD[/QUOTE
My guess is to try, ruuing back to stock re rooting and trying again..
Click to expand...
Click to collapse
Not sure it's worth the trouble!
Don't I have to relock the bootloader, ruu, then unlock it again? It's been a while since I did it, and I don't remember where I put my token... Or do I need the token?
CheesyNutz said:
some phones just cant OC
Click to expand...
Click to collapse
It was overclocked before on other roms, but I just can't get it to work on this one.
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse

Well, come to find out, it's oc'ing just fine, just CPU spy wouldn't show anything over stock speeds for some reason
Sent from my HTC One XL using Tapatalk 2

brbarnyard said:
Well, come to find out, it's oc'ing just fine, just CPU spy wouldn't show anything over stock speeds for some reason
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Someone else told me this, but cpu spy shows me running at higher than stick clock speeds.
Sent from my HTC One X+ using xda app-developers app

Try disabling apply on boot in venum tweeks and any other gov app before you install oc in elemental, I had same issue until I unchecked apply on boot then I reinstalled elemental............something is wacky though because I tried to install back to stock with no oc but on reboot settings in Rom revert back and shows oc....thx tho to dev who works hard sharing there work...
Sent from my HTC One XL using xda premium

[ROM][STOCK] Samsung Discover SGH-S730M/S730G

For the first custom ROM for the Discover go here http://forum.xda-developers.com/showthread.php?t=2673097
These are stock ROM's for the Samsung Disover SGH-S730M. The will work on the S730G also. I have uploaded these so you can either return to stock or use as a base for your custom development. If you use for custom, please give a mention or a thanks as it took hours upon hours to bring the first flashable ROM to this phone.
Option 1 is bone stock, no root, no busy box, no over clock. After flashing this option CWM will ask you if you want to fix root before you reboot from recovery. Select no. If you want root, download option 2 or 3.
Option 2 is stock, with root and busy box added.
Option 3 is stock, with root, busybox and overclocked to 1000mhz
No other changes have been made.
I have flashed and test all three to verify they are flashing and working properly
Option 1 Download: http://d-h.st/S2R
Option 2 Download: http://d-h.st/cI9
Option 3 Download: http://d-h.st/5FZ
Installation:
1. Wipe data/factory reset
2. Flash
3. Wipe Dalvik
4. Reboot
Enjoy!

Waaoooo!, i download, try and come back you, great job
Edit: Install download Option 2, work

Thanks. Hopefully having these available will inspire and other devs to use them as a base for their own custom
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

In the download option 3 you have set kernel with clock at 1000mhz, and he start at 122mhz too ? or it's 245mhz ?
I used option 2 with NoFrillsCPU for setting cpu at 122mhz. I listen music without problem with bluetooth too.
This rom is stable and no problem with battery. Again great job

Minimum is set at 122 max is 1000. It usually runs between 480 and 600, only boosts up to 800-1000 when needed. It's safe to run option 3, and use nofrills, cpu tuner, set cpu etc, and set the max to 800, then if your playing a game or watching you tube, and find your lagging a bit you at least have the option to bump it up to 1000. Then just set it back when your done. That's how I run it
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

atmu5fear said:
Minimum is set at 122
Click to expand...
Click to collapse
I verify is set at 245mhz, possible to doing fix for 122 ?

Bibounet said:
I verify is set at 245mhz, possible to doing fix for 122 ?
Click to expand...
Click to collapse
I have attached a screenshot from my discover, running the same kernel. Minimum is set to 122 and currently running at such speed when screenshot was taken.

atmu5fear said:
I have attached a screenshot from my discover, running the same kernel. Minimum is set to 122 and currently running at such speed when screenshot was taken.
Click to expand...
Click to collapse
Ok, i verify second time and for me is setted at 245 basicaly, but it's ok i changed the default with CPU Tuner. All work great.

Flashed option 2, working like a charm. Dropped it to 800 mhz and seem to be getting better battery life. Thanks

can anyone give odin flashable stock rom?

mmrozibul said:
can anyone give odin flashable stock rom?
Click to expand...
Click to collapse
I have no intentions of building an Odin flashable version as of right now. There's no real need for it as of yet, and the risk of hard bricking your device grows exponentially if you get one thing wrong in an Odin flashable tar.md5 vs a flashable zip. What do you need it for?
Sent from my SGH-T989D using XDA Premium 4 mobile app

Nomad692000 said:
Flashed option 2, working like a charm. Dropped it to 800 mhz and seem to be getting better battery life. Thanks
Click to expand...
Click to collapse
Glad to hear. Option 2 tho isn't overclocked to 1000mhz, its running at the stock 800mhz out of the box.
Sent from my SGH-T989D using XDA Premium 4 mobile app

atmu5fear said:
Glad to hear. Option 2 tho isn't overclocked to 1000mhz, its running at the stock 800mhz out of the box.
Sent from my SGH-T989D using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Should have been option 3. Dam gonga

atmu5fear said:
I have no intentions of building an Odin flashable version as of right now. There's no real need for it as of yet, and the risk of hard bricking your device grows exponentially if you get one thing wrong in an Odin flashable tar.md5 vs a flashable zip. What do you need it for?
Sent from my SGH-T989D using XDA Premium 4 mobile app
Click to expand...
Click to collapse
need firmware because phone is in restarting condition..
I flashed custom recovery + all rom i found but phone not recover..

mmrozibul said:
need firmware because phone is in restarting condition..
I flashed custom recovery + all rom i found but phone not recover..
Click to expand...
Click to collapse
Did you wipe cache's. Dont forget to flash gapps, mine gave me a fit till I did.

Nomad692000 said:
Did you wipe cache's. Dont forget to flash gapps, mine gave me a fit till I did.
Click to expand...
Click to collapse
yes I did but still same.

Great job. Just flashed option 3 to my old Discover. No issues so far. Can't tell if data and all that is good cause I don't have a SIM in it, bit everything else is great. I have a build environment up and ready. Doing some digging and going to try to make 2 different builds for this device. A customizable ROM based on the stock base you've provided, and a CM10 build. Will be a while but may be of some success.
Sent from my SGH-I777 using xda app-developers app

mmrozibul said:
yes I did but still same.
Click to expand...
Click to collapse
This is precisely the reason I want an odin flashable stock rom before i do anything. The phone is only 4 months old for me, cheap yes but still better to have instanly fixed then wasting $100.

The only thing I have found is flashing the "M" to the "G" you have to manually transfer the apn data after the flash. Or you can't send or recieve mms messages. Other than that no problems.

Nomad692000 said:
The only thing I have found is flashing the "M" to the "G" you have to manually transfer the apn data after the flash. Or you can't send or recieve mms messages. Other than that no problems.
Click to expand...
Click to collapse
Ya that's completely to be expected, the M is from Canada, so it has different carrier APN settings. Easy fix. Just google your carriers APN settings and punch them in
Sent from my SGH-T989D using XDA Premium 4 mobile app