Trying to overclock, and just can't get it to take
ViperXL 3.1.0
ElementalX-1.5
1.09 Hboot
I've gone so far as to completely wipe the 'sdcard' and start from scratch. Running 'lsmod' in terminal shows that the module is loaded, and the max speed I select shows under cpu in venom tweaks. This is driving me nuts! What can I do to troubleshoot?
When you flashed elemental, what did you set as your max CPU speed?
What program are you using to check / set CPU speed?
thebobmannh said:
When you flashed elemental, what did you set as your max CPU speed?
What program are you using to check / set CPU speed?
Click to expand...
Click to collapse
I've tried 1728, 1809, & 1890. I even tried speeds lower than stock, and it still runs at factory speeds, so I'm thinking something is wrong with the oc module, but I don't know his to check. I tried using the app built into viper, setcpu, and kernel tuner. I thought they may be conflicting, and that's why I wiped and started fresh.
Sent from my Nexus 7 using Tapatalk HD
brbarnyard said:
I've tried 1728, 1809, & 1890. I even tried speeds lower than stock, and it still runs at factory speeds, so I'm thinking something is wrong with the oc module, but I don't know his to check. I tried using the app built into viper, setcpu, and kernel tuner. I thought they may be conflicting, and that's why I wiped and started fresh.
Sent from my Nexus 7 using Tapatalk HD[/QUOTE
My guess is to try, ruuing back to stock re rooting and trying again..
Click to expand...
Click to collapse
some phones just cant OC
CheesyNutz said:
some phones just cant OC
Click to expand...
Click to collapse
I'd be soooooo mad
Sent from my One X using Tapatalk 2
WhatTheAndroid? said:
brbarnyard said:
I've tried 1728, 1809, & 1890. I even tried speeds lower than stock, and it still runs at factory speeds, so I'm thinking something is wrong with the oc module, but I don't know his to check. I tried using the app built into viper, setcpu, and kernel tuner. I thought they may be conflicting, and that's why I wiped and started fresh.
Sent from my Nexus 7 using Tapatalk HD[/QUOTE
My guess is to try, ruuing back to stock re rooting and trying again..
Click to expand...
Click to collapse
Not sure it's worth the trouble!
Don't I have to relock the bootloader, ruu, then unlock it again? It's been a while since I did it, and I don't remember where I put my token... Or do I need the token?
CheesyNutz said:
some phones just cant OC
Click to expand...
Click to collapse
It was overclocked before on other roms, but I just can't get it to work on this one.
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Well, come to find out, it's oc'ing just fine, just CPU spy wouldn't show anything over stock speeds for some reason
Sent from my HTC One XL using Tapatalk 2
brbarnyard said:
Well, come to find out, it's oc'ing just fine, just CPU spy wouldn't show anything over stock speeds for some reason
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Someone else told me this, but cpu spy shows me running at higher than stick clock speeds.
Sent from my HTC One X+ using xda app-developers app
Try disabling apply on boot in venum tweeks and any other gov app before you install oc in elemental, I had same issue until I unchecked apply on boot then I reinstalled elemental............something is wacky though because I tried to install back to stock with no oc but on reboot settings in Rom revert back and shows oc....thx tho to dev who works hard sharing there work...
Sent from my HTC One XL using xda premium
Related
This mod will work on snapdragon devices.
See the main thread here: http://forum.xda-developers.com/showthread.php?t=1798765
Please post comments and questions there.
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks buck-o, but it appears we already seen a version of this known as 'Dual Core Mod'. Seems a bit different, will try now.
Think I'll be giving this a try with the fusion kernel see how that works out.
Sent from my HTC VLE_U using xda premium
Sweet !!! checking it now on trickdroid ...
Thanks !!:good:
ickedmel said:
Think I'll be giving this a try with the fusion kernel see how that works out.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
Please do!. If you give it 2 thumbs up with that combo ill be a flashing away. Awaiting your verdict!
Sent from my HTC VLE_U using Tapatalk 2
I've been using this since I got my one s and Orical told me about this.
This is epic guys, genius mod.
Sent from my HTC VLE_U using Tapatalk 2
I recommend trying this with stock. I am currently on fusion kernel, my settings don't stick, and well we all know the kernel isn't 100% yet so let's not judge the kernel or the mod .
i cannot acces governor for cpu0 and 1, same for i/o scheduler
just a bunch of numbers appearing
everything else is accessable and i applied battery save profile for ondemad governor, so i still have to see how it improves the battery life
Gaba90 said:
i cannot acces governor for cpu0 and 1, same for i/o scheduler
just a bunch of numbers appearing
everything else is accessable and i applied battery save profile for ondemad governor, so i still have to see how it improves the battery life
Click to expand...
Click to collapse
I'm having this same problem. Flashed the start_stop_daemon and it still doesn't work.
Looks great! I'm about to try.
What is this start/stop daemon? Is it necessary?
Sent from my HTC One S using xda premium
ShensMobile said:
I'm having this same problem. Flashed the start_stop_daemon and it still doesn't work.
Click to expand...
Click to collapse
You need to install busybox 1.19.3 the latest doesn't have it. After you do though fix permissions. And yes it won't work without it.
Sent from my HTC VLE_U using xda premium
Orical said:
You need to install busybox 1.19.3 the latest doesn't have it. After you do though fix permissions. And yes it won't work without it.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
I'm on Trickdroid v7.0.0 which should have the latest busybox. Are you saying I should install the newest busybox from market?
Can anyone confirm if this has a smart script that turns off CPU1 and underclocks both CPUs when screen is off?
ShensMobile said:
I'm on Trickdroid v7.0.0 which should have the latest busybox. Are you saying I should install the newest busybox from market?
Click to expand...
Click to collapse
No the latest is 2.0 something, use the 1.19.3 version because the latest doesn't have start-stop-daemon included.
Sent from my HTC VLE_U using xda premium
Closed Source Project said:
Can anyone confirm if this has a smart script that turns off CPU1 and underclocks both CPUs when screen is off?
Click to expand...
Click to collapse
Yes it puts it to the lowest state when screen is off by default, unless you change the profile off and set both min max high it will always knock it down.
Sent from my HTC VLE_U using xda premium
Closed Source Project said:
Can anyone confirm if this has a smart script that turns off CPU1 and underclocks both CPUs when screen is off?
Click to expand...
Click to collapse
No it does not, when using ondemand governor it adjusts the cpus when necessary. When cpu1 is needed it comes online, kinda makes the cpu1 off while sleeping unnecessary. I am thinking about adding the underclocking while the screen is off and while the phone is in use for a future releases. But this script doesnt use screen off to do anything.
Orical said:
No the latest is 2.0 something, use the 1.19.3 version because the latest doesn't have start-stop-daemon included.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
Where do I get the 1.19.3 version?
And do I need to reflash the start-stop-daemon again?
ShensMobile said:
Where do I get the 1.19.3 version?
And do I need to reflash the start-stop-daemon again?
Click to expand...
Click to collapse
Download busybox installer from play store.
Sent from my One S
luddeblaesild said:
Download busybox installer from play store.
Sent from my One S
Click to expand...
Click to collapse
Thank you I already started installing 1.19.3.
Nevermind, it's all working now Thanks guys!
Now to test it out... I'll let you guys know how it is
alright i also got it working now thanks to busybox 1.19.3
what´s the standard set for scheduler on the stock kernel? don´t want to change if i dont know how to change back
also noticed just now that changing max freq of cpu1 does not work
My g2x is GB rooted and it keeps freezing! for example I play any games on it and it freezes or i get mulitple txt and it freezes. also any type of browser that I use( dolphin, maxthon, fast, chrome, etc) the will work for a while but it also freezes or if i go to any website like facebook or even google it takes a great while for it to load up! I have full bars and excellent 4G. I should mention that I have the app setcpu almost at max speed thinking the phone wont freeze but it still does.... any suggestion to make the phone not freeze and faster web load like in the past ? thank you for your time
Georican said:
My g2x is GB rooted and it keeps freezing! for example I play any games on it and it freezes or i get mulitple txt and it freezes. also any type of browser that I use( dolphin, maxthon, fast, chrome, etc) the will work for a while but it also freezes or if i go to any website like facebook or even google it takes a great while for it to load up! I have full bars and excellent 4G. I should mention that I have the app setcpu almost at max speed thinking the phone wont freeze but it still does.... any suggestion to make the phone not freeze and faster web load like in the past ? thank you for your time
Click to expand...
Click to collapse
What ROM are you running? And Kernel?
Sent from my LG-P999 using xda app-developers app
russell956956 said:
What ROM are you running? And Kernel?
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Rom 2.3.3 rooted and kernel 2.6.32.9
Are you undervolting with set CPU? That could be the culprit. Set everything back to stock and see if the problem persists
Sent from my LG-P999 using xda premium
rtotheichie said:
Are you undervolting with set CPU? That could be the culprit. Set everything back to stock and see if the problem persists
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Im very nood at this stuff, do you mean do a factory reset ? and undervolting ?
Georican said:
Im very nood at this stuff, do you mean do a factory reset ? and undervolting ?
Click to expand...
Click to collapse
no, I think he meant for you to set the cpu run at stock speed and then see if you still have the same problem.
2am said:
no, I think he meant for you to set the cpu run at stock speed and then see if you still have the same problem.
Click to expand...
Click to collapse
i know its goin to sound stupid but how do i run it at stock speed? in setcpu?
Georican said:
i know its goin to sound stupid but how do i run it at stock speed? in setcpu?
Click to expand...
Click to collapse
Are you using any apps like setcpu, pimpmycpu, antutu? If not, you are already on stock voltage.
If you are familiar with flashing, flash others GB roms from the dev area. See if it still crashes.
cricketAC said:
Are you using any apps like setcpu, pimpmycpu, antutu? If not, you are already on stock voltage.
If you are familiar with flashing, flash others GB roms from the dev area. See if it still crashes.
Click to expand...
Click to collapse
im using the app setcpu because before my phone started to freeze after installing setcpu my phone was working great for a long time until now recently that my phone has started to freeze so much. So i must flash with another rom ? or should i unistall setcpu?
Georican said:
im using the app setcpu because before my phone started to freeze after installing setcpu my phone was working great for a long time until now recently that my phone has started to freeze so much. So i must flash with another rom ? or should i unistall setcpu?
Click to expand...
Click to collapse
It could be that you need to do a factory reset on your phone and start fresh, that could probably fix your freezing problem.
Also you might also want to look into updating your phone to LG's official 2.3.4 ROM, it is much more stable than the 2.3.3 ROM that your on.
Sent from my LG-P999 using xda app-developers app
I can't get my max to stick at 1.7ghz. When I try to it'll go back to 1.5 and even 1.1 at times. How can I get it to stick?
On Vengeance V3 ROM w/ LK 1.8, I've checked terminal and I have a 'fast' CPU.
Written with a "Vengeance" by my GS3.
HaVoK C89 said:
I can't get my max to stick at 1.7ghz. When I try to it'll go back to 1.5 and even 1.1 at times. How can I get it to stick?
On Vengeance V3 ROM w/ LK 1.8, I've checked terminal and I have a 'fast' CPU.
Written with a "Vengeance" by my GS3.
Click to expand...
Click to collapse
Type su then lkconfig and choose 2. Settings will stick now.
sent telepathically
jdub251 said:
Type su then lkconfig and choose 2. Settings will stick now.
sent telepathically
Click to expand...
Click to collapse
I did this along w/ a reset so that I could undervolt as well....followed by a reset of course. Should I try to do it again?
Thank you for the quick reply.
HaVoK C89 said:
I did this along w/ a reset so that I could undervolt as well....followed by a reset of course. Should I try to do it again?
Thank you for the quick reply.
Click to expand...
Click to collapse
Does your rom have LeanKernel file in System/etc/init.d/
Try downloading/updating your Busy box from the Play Store.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
Does your rom have LeanKernel file in System/etc/init.d/
Try downloading/updating your Busy box from the Play Store.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Hmm....That I'm not sure of. I'll go and check and get back w/ yall as soon as I can!
Ok, so i checked the int folder and it does have "00leanKernel" inside says:
Code:
#!/system/bin/sh
VMIN=0
echo $VMIN > /sys/devices/system/cpu/cpu0/cpufreq/override_vmin
As for busybox....I"m not sure if that is on this ROM or not. If not should I install it? I found a BusyBox app on the play store that says its supposed to install busy box. Jus don't wanna mess up anything lol.
HaVoK C89 said:
Ok, so i checked the int folder and it does have "00leanKernel" inside says:
Code:
#!/system/bin/sh
VMIN=0
echo $VMIN > /sys/devices/system/cpu/cpu0/cpufreq/override_vmin
As for busybox....I"m not sure if that is on this ROM or not. If not should I install it? I found a BusyBox app on the play store that says its supposed to install busy box. Jus don't wanna mess up anything lol.
Click to expand...
Click to collapse
Go ahead and download Busybox by Stephen (Sterickson). Let's see how that takes.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
Go ahead and download Busybox by Stephen (Sterickson). Let's see how that takes.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I did that, Normal Install. Reset. Atm it still looks like its hopping around. Generally staying at 1512 but also going as low as 1134 like before. Govenor/ ondemand, scheduler/row
Maybe the kernel still hasn't settled yet? I've had it installed for the last several days.
HaVoK C89 said:
I did that, Normal Install. Reset. Atm it still looks like its hopping around. Generally staying at 1512 but also going as low as 1134 like before. Govenor/ ondemand, scheduler/row
Maybe the kernel still hasn't settled yet? I've had it installed for the last several days.
Click to expand...
Click to collapse
Aight, which kernel app are you using? It should only act somewhat iffy for about ten minutes after the initial kernel flash not a couple days. Also, is the phone hot while you're trying to adjust the OC?
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
Aight, which kernel app are you using? It should only act somewhat iffy for about ten minutes after the initial kernel flash not a couple days. Also, is the phone hot while you're trying to adjust the OC?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I'm using SetCPU. Min set to 384. Right I would've thought it would've settled by now. Generally really w/ most kernels I've installed they've all had a tendency to jump up in heat kinda quickly. So yes it does generally get hot even while adjusting OC.
Yea, maintaining OC can be somewhat tricky depending on the heat produced. Does this continue to occur when you select "set at boot" option for the CPU?
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
Yea, maintaining OC can be somewhat tricky depending on the heat produced. Does this continue to occur when you select "set at boot" option for the CPU?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes. I've checked it after a couple of resets and it just doesn't wanna hold. Resets to 1512.
Written with a "Vengeance" by my GS3.
Kernel download:
http://faux.romhost.me/htc_m8wl/kk44/
Change log:
http://faux.romhost.me/htc_m8wl/kk44/changelog.txt
Source:
https://github.com/faux123/htc_m8
Check the unified thread here for discussions and questions:
http://forum.xda-developers.com/showthread.php?t=2712044
Enjoy!
reesrved 1 just in case
Would love to have a faux kernel for this! Faux was always good for battery life..
Sent from my HTC6525LVW using xda app-developers app
Nice thanks
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Flashed your VZW kernel and booted and working great so far thanks!
Sent from my HTC6525LVW using Tapatalk
Glad I made a good choice and bought the m8. Missing your work man. Samsung is kinda lonely and quiet lately..
Flashing can't wait
Sent from my HTC6525LVW using Tapatalk
---------- Post added at 03:37 AM ---------- Previous post was at 03:30 AM ----------
Installed and butta smooth.
Sent from my HTC6525LVW using Tapatalk
Backed up my boot partition and flashed this. It felt noticeably slower after a few minutes so I restored my boot partition. Now my wifi will no longer turn on. How do I correct the issue? wifi will work when I reinstall but If I try to go back to the stock kernel it no longer will. This kernel is WAY slower than the stock kernel.
ocman40 said:
Backed up my boot partition and flashed this. It felt noticeably slower after a few minutes so I restored my boot partition. Now my wifi will no longer turn on. How do I correct the issue? wifi will work when I reinstall but If I try to go back to the stock kernel it no longer will. This kernel is WAY slower than the stock kernel.
Click to expand...
Click to collapse
if you don't have wifi, download again. there was a 5 min window where an older version was with broken wifi was live
Anyone else having trouble reading their sdcard with this kernel?
Sent from my Nexus 7 using Tapatalk
faux123 said:
if you don't have wifi, download again. there was a 5 min window where an older version was with broken wifi was live
Click to expand...
Click to collapse
I have WIFI with your kernel but its SLOW and laggy as heck. When I got back to my stock kernel WIFI will not turn on. Can you post steps to restore the stock modules please.
ocman40 said:
I have WIFI with your kernel but its SLOW and laggy as heck. When I got back to my stock kernel WIFI will not turn on. Can you post steps to restore the stock modules please.
Click to expand...
Click to collapse
reflash your ROM or nandroid backup.
faux123 said:
reflash your ROM or nandroid backup.
Click to expand...
Click to collapse
a reflash of the nandroid boot partition did not work. Still no WIFI. However if I reflash your kernel wifi returns. What modules are being deleted?
Running smooth as silk over here! Does the faux app work on this phone and if so what are the recommended settings that you use please?
Really nobody else with sdcard issues? My 64gb card won't mount. Was working fine before installing kernel
Sent from my Nexus 7 using Tapatalk
Something is definitely up. Phone seems lagier and using Linpack I now get the same and lower results for Single Thread and Multi Thread. It's as if the other cores aren't being enabled.
Sent from my S-Off VZW HTC One M8
My phone runs pretty smooth I have noticed though that the default clock speed is at 1ghz I believe that may be the reason why people are noticing lag ?
Also my WiFi speeds are normal.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
ickedmel said:
My phone runs pretty smooth I have noticed though that the default clock speed is at 1ghz I believe that may be the reason why people are noticing lag ?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I noticed that to 1036. I had to reflash my rom since it broke WIFI.
I noticed before I installed faux kernel app the the kernel is set to max cpu speed at only 1000,as soon as I raised it to stock speed it was working perfectly
Sent from my HTC M8, Verizon style.
Sooooo... Does this include fauxsound?
bawksybrown said:
Sooooo... Does this include fauxsound?
Click to expand...
Click to collapse
fauxsound coding is actually done in my private build, but HTC did something non-standard and is conflicting with fauxsound kernel drivers.. that's why i didn't release it yet.. need to troubleshoot and see what HTC has done to the standard sound driver from Qualcomm...
HTC always do something different from everyone else including the reference design from Qualcomm.... Sometimes they OVER engineered...
I've had this issue on Mahdi ROM which is what I'm on right now, but also every other ROM and every kernel that I've tried except for ElementalX. Basically, the kernel will change it's max frequency to 1.19 GHz usually, and soemtimes 1.6 GHz or 1.9GHz and you can't change it back until you flash a different kernel. Rebooting doesn't help, and changing it kernel tuner only helps temporarily. Every other kernel app only changes CPU0 for some reason not sure if that's just be or what. It's a very strange problem, and I have not gotten any help or suggestions so far, so if anyone knows how to help, that would be great. Again, this has happened on every single ROM I've tried, with every kernel, except ElementalX (and I think Trinity but I didn't use it long enough to be sure).
Sent from my Nexus 5 using XDA Premium 4 mobile app
RollTribe said:
I've had this issue on Mahdi ROM which is what I'm on right now, but also every other ROM and every kernel that I've tried except for ElementalX. Basically, the kernel will change it's max frequency to 1.19 GHz usually, and soemtimes 1.6 GHz or 1.9GHz and you can't change it back until you flash a different kernel. Rebooting doesn't help, and changing it kernel tuner only helps temporarily. Every other kernel app only changes CPU0 for some reason not sure if that's just be or what. It's a very strange problem, and I have not gotten any help or suggestions so far, so if anyone knows how to help, that would be great. Again, this has happened on every single ROM I've tried, with every kernel, except ElementalX (and I think Trinity but I didn't use it long enough to be sure).
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
go to /etc/init.d/, then delete all the files inside of it, then reboot for it to take affect.
simms22 said:
go to /etc/init.d/, then delete all the files inside of it, then reboot for it to take affect.
Click to expand...
Click to collapse
Didn't help. Still at 1.19 GHz.
Sent from my Nexus 5 using XDA Premium 4 mobile app
RollTribe said:
Didn't help. Still at 1.19 GHz.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
well, its not another rom or kernel issue, its an issue on the user side(a mod or a file that you added?).
simms22 said:
well, its not another rom or kernel issue, its an issue on the user side(a mod or a file that you added?).
Click to expand...
Click to collapse
See, I thought that too, but some ROMs this will happen right when I flash and others it occurs a few days in. It's sort of weird. Clean flashed like 10 times.
Sent from my Nexus 5 using XDA Premium 4 mobile app
RollTribe said:
See, I thought that too, but some ROMs this will happen right when I flash and others it occurs a few days in. It's sort of weird. Clean flashed like 10 times.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
there are things that get missed when wiping, like init.d files sometimes. everyone(but 1 person) ive seen this happen to has had it fixed when deleting their init.d folder/files. id recommend flashing the factory img instead of wiping, it one way to get a true clean flash afterwards.
simms22 said:
there are things that get missed when wiping, like init.d files sometimes. everyone(but 1 person) ive seen this happen to has had it fixed when deleting their init.d folder/files. id recommend flashing the factory img instead of wiping, it one way to get a true clean flash afterwards.
Click to expand...
Click to collapse
I think there may be something seriously wrong with my phone... I went ahead and flash the stock image, and everything went fine... but lo and behold on entirely stock firmware my phone still maxes out at whatever frequency it damn well feels like (1.5 GHz right now, but it was at 1.19 earlier). I have no idea what could possibly be doing this.
RollTribe said:
I think there may be something seriously wrong with my phone... I went ahead and flash the stock image, and everything went fine... but lo and behold on entirely stock firmware my phone still maxes out at whatever frequency it damn well feels like (1.5 GHz right now, but it was at 1.19 earlier). I have no idea what could possibly be doing this.
Click to expand...
Click to collapse
if its completely stock, its probably due to mpdecision.
simms22 said:
if its completely stock, its probably due to mpdecision.
Click to expand...
Click to collapse
Okay, I'll be honest I'm not entirely sure how mpdecision works, but from what I understand this is not how it should behave, yes? My phone is just stuck at 1.19 ghz and won't go up even when the CPU load goes up, and then my device lags. If this is how it is supposed to behave, would you mind explaining why?
Bump. Still having same problem would really like a solution, it's extremely annoying and I've seen a few other people have this problem
Sent from my Nexus 5 using XDA Premium 4 mobile app
If the cpu is not hot (thermal throttling) then maybe you have a defective unit :-s
Sent from my Nexus 7 using Tapatalk