Related
Hi, I am sort of new here but I know enough to get around on what I need to do, but I am at a stand still...
I bought a US Cellular Touch Pro 2 from Ebay which was "unlocked" supposedly, but my ATT phone card does nothing in it, I can get digital roaming but ATT will not work on the phone.
So my question is, what are the needed steps in order to get my Touch Pro 2 to get working on the ATT network. As far as I know the Security is not unlocked.
Thanks ahead of time,
if you need any other information please ask =D
-Cyanide
Note: I bought an unlock code from Ebay earlier, but since it says its unlocked I cant use the code, unless there is another way to use that code.
if im right and some1 here can correct me if im not. i think u have to sim unlock it for it to work.
My US Cell TP2 came SIM unlocked
Same as above, my us cell tp2 came sim unlocked also
I just got one from ebay, and I had to security unlock it and install appropriate radio to get it working on at&t
Will any of the GSM labeled AT&T work or is there one that's best?
forum.xda-developers.com/showthread.php?t=549939
will it work with umts 850????
do you know if someone got it working????
I just bought three of these off ebay that were 'unlocked'
yes it says 'your phone is sim unlocked' in the security tab but my ATT cards are not working
someone mentioned adding software or something. can someone please show me how to do this asap. we kinda counted on having the phones today.
i bought a us cellular on ebay as well. had to security unlock it. Got code from this site and then bought from olipro. this should help.
http://rhodiumw.htc-unlocks.com/
http://pocketnow.com/tweaks-hacks/unlock-the-sprint-touch-pro2-radio-to-get-us-gsm
the first one you have to but then the second link you need to watch to get the imei number before you buy unlock stuff. hope this helps. trin to give back what i learned.
There are two different kinds of SIM Unlocks
There is the stock SIM unlock which allows you to use the sim card for other countries. You click on settings, and sim management and it says the sim is unlocked. However, that does not mean that you can use it with ATT or TMobile here in the united states. Reboot your phone and you will most likely see that your radio says something like 2.10.00WF The WF is what is screwin you over with ATT. You need to pay for and use the SIM unlock from Olipro, (there are tons of links already for it.) and unlock the phone. Then put a WU radio on it. I find that the best one that works for USCC is the 1.96.10WU Radio. It has the least amount of DATA crashes. Hope that helps ya out a bit.
jmy72 said:
There is the stock SIM unlock which allows you to use the sim card for other countries. You click on settings, and sim management and it says the sim is unlocked. However, that does not mean that you can use it with ATT or TMobile here in the united states. Reboot your phone and you will most likely see that your radio says something like 2.10.00WF The WF is what is screwin you over with ATT. You need to pay for and use the SIM unlock from Olipro, (there are tons of links already for it.) and unlock the phone. Then put a WU radio on it. I find that the best one that works for USCC is the 1.96.10WU Radio. It has the least amount of DATA crashes. Hope that helps ya out a bit.
Click to expand...
Click to collapse
weird. olinex recomended the 2.32.00wu radio over all the others. but seeing as how my data connection never wants to stay open, maybe i will give that one a try.
Ok so i got the paid unlocking tool and ran it. it appears to have worked.
I then went to this link
http://forum.xda-developers.com/showthread.php?t=578659
and installed both the us cellular and sprint (the first and fourth link).
was that a mistake?
Anyway it doesnt say att when i put in a non active sim card.
is it still ready to use? also when i install the radios should it be in global or gsm mode or does it matter?
nx_2000 said:
will any of the gsm labeled at&t work or is there one that's best?
Forum.xda-developers.com/showthread.php?t=549939
Click to expand...
Click to collapse
Do not install any of those GSM radios to any CDMA phone!!!!!
You will BRICK IT!!!!1
I got a US Cellular HTC TP2 phone too don't use those ****ing radios!
DaveNavy said:
The US Cellular Version on the TP2 is a CDMA AND GSM PHONE you can flash other ROMS than just CDMA this pork chop has no clue what he is talking about.
Click to expand...
Click to collapse
ummm, this is acdma phone with just a extra gsm radio so you can only flash CDMA roms
Wrong??!!! WTF! A troll in this forum?
DaveNavy said:
The US Cellular Version on the TP2 is a CDMA AND GSM PHONE you can flash other ROMS than just CDMA this pork chop has no clue what he is talking about.
Click to expand...
Click to collapse
YOU SHOULD BE BANNED FOR TROLLING AND MAKING FALSE STATEMENTS! YOU DON'T KNOW WHAT YOU'RE TALKING ABOUT!...
Why don't you go ahead buy a CDMA TP2 phone and flash a GSM radio or ROM, go ahead. And make someone record your face and the device. Let's see how you enjoy turning a working phone into a black death piece of hardware that will not respond or do anything.
You better delete your post before someone that doesn't know any better follow your misguided advice and brick their phone!
@DaveNavy,
Read up a bit on this device before advising people. Flashing a GSM rom on a native CDMA device (RhodiumW) is the best and fastest way to end up with a brick. Please make sure about these things before you post anything like this again.
@ all,
Please stop the flaming right here.
egzthunder1 said:
@DaveNavy,
Read up a bit on this device before advising people. Flashing a GSM rom on a native CDMA device (RhodiumW) is the best and fastest way to end up with a brick. Please make sure about these things before you post anything like this again.
@ all,
Please stop the flaming right here.
Click to expand...
Click to collapse
I dont think I was flaming. I wa just correcting his mistake
How long did it take after you paid to get the download link?
Works great using windows 7. I am running Att with data smooth now.
Hello All,
I hope someone can help me with this.
I have a TP2 (Sprint) and I need to use it for At&t.
The first thing I did was unlock the device using RhodiumWUnlocker from Olipro (and made my donation ).
I did all steps, and everything went fine. No problems. And it detected AT&T
Then I flashed the ROM with EnergyROM Leo Manila 2.5 WM6.5 v 16Feb2010, By NRGZ28. (File: Energy.RHOD500.23529.Leo_MaxManila.16.Feb.2010.rar) - Still all well, no problems.
Then it went back to stock and could not detect AT&T. So I flashed the Radio Version: 4.49.25.91 from this thread: forum.xda-developers.com/showthread.php?t=549939.
Now I cannot turn on my phone at all - No "touchpro2" screen, no bootloader, nothing at all. The phone doesn't react to any combinations of buttons to turn on or load up bootloader. When I connect the phone to the computer (Vista by the way) the charging orange light comes on for about 3 minutes then goes off. Then I press the power button and the light comes back on, but nothing else happens to the phone.
Please help!!! Let me know what's wrong and how I can fix it, please!!! I'll make another donation to fix it.
Thanks!
I'm no expert but it sounds like you may have flashed a CDMA Rhodium with GSM firmware. I had a quick look and it seems the Sprint Rhodium is CDMA, you should have a look at the CDMA Rhodium forum here:
http://forum.xda-developers.com/forumdisplay.php?f=517
I'm not totally sure of the GSM / CDMA thing because I'm not in the U.S. it's not something I need to worry about.
Good luck dude
Yeah the more I look at this, the more I am convinced this is what has happened.
You used CDMA HardSPL (RhodiumWUnlocker)
Then flashed a CDMA ROM (Energy.RHOD500 ...)
but your mistake was to flash a GSM Radio ROM (I followed the URL you gave and up popped the GSM Radio ROM thread)
I don't know if this is recoverable but searching the CDMA forum would be a good start. You can't be the first person this has happened to.
Thanks for the response, but I am certain I flashed the correct ROM.
*I went to the wingster website
*I selected CDMA ROM's
*Clicked on EnergyROM Leo
*Clicked on Download - Hotfile.com
*Selected this ROM: Energy.RHOD500.23529.Leo_MaxManila.16.Feb.2010.rar
When I flashed this ROM, the phone loaded up without any issues. The only problem was that I could not make calls because it could not detect the AT&T SIM card. So I flashed the radio shown on the post from xda, and the PC said congratulations, everything is complete and good. At this time, the cell phone rebooted and it just never came back on.
Thanks for the help!!
Thanks MadBeef, I will research the CDMA forum.
The Main ROM you flashed was fine. It's the Radio ROM you flashed that killed it, because your phone is CDMA hardware but now it has GSM Radio ROM on it. That's my theory anyway, I'm hoping someone a bit more experienced with CDMA will be able to chime in.
If you can get back into the bootloader somehow, you should be able to flash a CDMA Radio ROM.
I only read the first line of your problem...sprint to at&t...it can never happen. Sprint is cdma which has no sim and at&t is a gsm which has a sim. You better have insurance so you can run over your now "speed bump" and get a new one.
shenriquez84 said:
Thanks for the response, but I am certain I flashed the correct ROM.
*I went to the wingster website
*I selected CDMA ROM's
*Clicked on EnergyROM Leo
*Clicked on Download - Hotfile.com
*Selected this ROM: Energy.RHOD500.23529.Leo_MaxManila.16.Feb.2010.rar
When I flashed this ROM, the phone loaded up without any issues. The only problem was that I could not make calls because it could not detect the AT&T SIM card. So I flashed the radio shown on the post from xda, and the PC said congratulations, everything is complete and good. At this time, the cell phone rebooted and it just never came back on.
Thanks for the help!!
Click to expand...
Click to collapse
ROM fine.
Radio ROM = BAD.
RHOD400 and RHOD500 are the model numbers for the Sprint and Verizon TP2s respectively. Other carriers also share these model numbers, but those are the big two.
The Radio ROM you flashed however is for the GSM only TP2, not the combo CDMA/GSM TP2 that you have.
Flashing that Radio ROM was a HUGE no-no. Boom.
akademik_acheeba said:
I only read the first line of your problem...sprint to at&t...it can never happen. Sprint is cdma which has no sim and at&t is a gsm which has a sim. You better have insurance so you can run over your now "speed bump" and get a new one.
Click to expand...
Click to collapse
You should put a little more time into research before jumping in with the flip comments.
1) Sprint does have SIM cards. I've got one in my hand. (No, they're not used in all phones of course, but Sprint does have their own).
2) The Sprint Touch Pro 2 can very well be used on ATT once it is security unlocked and a patched Radio ROM is flashed. To say "it can never happen" is flat out wrong because it's been happening for a few months.
3) The CDMA Touch Pro 2 models (RHOD400 and RHOD500) aren't just CDMA. They are CDMA/GSM/UMTS worldphones, supporting operation in all three modes.
I'm Sorry Gamescan if I did not understand correctly. Does this mean there is no help? There's absolutely nothing I can do to revert this and fix it?
I really appreciate all the help!!
I wanted to reply to Akademik's comment, but I didn't have time. This is not the first phone I flash, but it is the first CDMA/GSM phone. I know this phone is dualmode, else I wouldn't have bought it to use it in AT&T.
Thanks again!
shenriquez84 said:
I'm Sorry Gamescan if I did not understand correctly. Does this mean there is no help? There's absolutely nothing I can do to revert this and fix it?
I really appreciate all the help!!
I wanted to reply to Akademik's comment, but I didn't have time. This is not the first phone I flash, but it is the first CDMA/GSM phone. I know this phone is dualmode, else I wouldn't have bought it to use it in AT&T.
Thanks again!
Click to expand...
Click to collapse
Can you connect to it via a mtty terminal?
I don't know if the SD card flash method would work here. If it were my phone I'd try it, but if it's not getting as far as the bootloader I think the chances are slim Maybe while there is no SIM card in it, give the radio ROM less to do?
Found some CDMA radios here:
http://forum.ppcgeeks.com/showthread.php?t=90342
Sounds like you might be screwed but there's a few ideas you can try. Good luck.
gamescan said:
mtty
Click to expand...
Click to collapse
I knew that would get a mention sooner or later uh oh hehe
Sorry, but what's a mtty terminal? That's new material for me...
and as Madbeef said, I have no access to the bootloader screen. I'm pressing all possible combinations of keys, and nothing.
Thanks again.
gamescan said:
ROM fine.
You should put a little more time into research before jumping in with the flip comments.
1) Sprint does have SIM cards. I've got one in my hand. (No, they're not used in all phones of course, but Sprint does have their own).
2) The Sprint Touch Pro 2 can very well be used on ATT once it is security unlocked and a patched Radio ROM is flashed. To say "it can never happen" is flat out wrong because it's been happening for a few months.
3) The CDMA Touch Pro 2 models (RHOD400 and RHOD500) aren't just CDMA. They are CDMA/GSM/UMTS worldphones, supporting operation in all three modes.
Click to expand...
Click to collapse
shenriquez84 said:
I'm Sorry Gamescan if I did not understand correctly. Does this mean there is no help? There's absolutely nothing I can do to revert this and fix it?
I really appreciate all the help!!
I wanted to reply to Akademik's comment, but I didn't have time. This is not the first phone I flash, but it is the first CDMA/GSM phone. I know this phone is dualmode, else I wouldn't have bought it to use it in AT&T.
Thanks again!
Click to expand...
Click to collapse
this result is based on shenriquez american flag in his pro. basically saying hes in america using an american sprint tp2 and trying to use american att service.
gamescan, if i said it cant be dont its quite obvious ive done research through trials and also working a phone carrier for 3 years before finding a better job...THIS CANNOT BE DONE. the dual mode in the sprint tp2 is ment for when people travel to europe, they can pop their "european sim" in and be on their merry way. european cell towers accept the frequency of the sprint tp2 and establish a connection. the US towers have "locked out" tmo and att from being used in the sprint tp2. the reason why you found att on connection setup was that your phone was basically saying" yes att is here, but your not connecting". shenriquez i followed the link to the radio you flashed before you got "shut off". you shouldnt have flashed a GSM radio on a SPRINT TP2...you are bricked my dude. you gave your phone a seizure man.
shenriquez84 said:
Sorry, but what's a mtty terminal? That's new material for me...
and as Madbeef said, I have no access to the bootloader screen. I'm pressing all possible combinations of keys, and nothing.
Thanks again.
Click to expand...
Click to collapse
Google mtty (or search for it on here).
Short version it's text based, but it's pretty much the lowest level access that a consumer can get to a HTC device without ripping the sucker open, manually desoldering the flash chip and putting in another.
If you're not getting the tri-color bootloader screen, there is still the possibility of saving it via terminal commands, but it's not straightforward (and depending on what happened it is certainly NOT guaranteed).
akademik_acheeba said:
this result is based on shenriquez american flag in his pro. basically saying hes in america using an american sprint tp2 and trying to use american att service.
gamescan, if i said it cant be dont its quite obvious ive done research through trials and also working a phone carrier for 3 years before finding a better job...THIS CANNOT BE DONE. the dual mode in the sprint tp2 is ment for when people travel to europe, they can pop their "european sim" in and be on their merry way. european cell towers accept the frequency of the sprint tp2 and establish a connection. the US towers have "locked out" tmo and att from being used in the sprint tp2. the reason why you found att on connection setup was that your phone was basically saying" yes att is here, but your not connecting". shenriquez i followed the link to the radio you flashed before you got "shut off". you shouldnt have flashed a GSM radio on a SPRINT TP2...you are bricked my dude. you gave your phone a seizure man.
Click to expand...
Click to collapse
Only it can be done.
With the tools mentioned in this here very forum.
Any many people have done it.
Again, you're not doing your research and making claims that are flat out wrong.
1) The Sprint TP2 hardware does support the US GSM frequencies.
2) The Sprint TP2 hardware does not ship with a SIM lock.
3) The Sprint TP2 hardware does ship with the two US GSM frequencies disabled in software.
4) If you pay for the Olinex security unlocker you can easily flash a patched radio ROM which re-enabled the two disabled frequencies.
About the only correct thing said in the post above is that he should not have flashed a radio ROM from a GSM-only TP2 to a CDMA/GSM combo TP2. The two devices do have different hardware so flashing the wrong drivers *IS* a BAD THING(tm).
But, assuming you have paid for the security unlocker, flashing a Sprint TP2 with an updated radio ROM is stupid easy and once you've done that making it work on ATT or TMO in the US requires nothing more than slotting in an active SIM card and switching the phone to GSM mode.
If you don't know the answer to something, please feel free to ASK about it, but don't make unfounded and incorrect statements. When you state an absolute that is false it just spreads misinformation which makes things confusing for other users, especially those new to the device.
gamescan said:
Google mtty (or search for it on here).
Short version it's text based, but it's pretty much the lowest level access that a consumer can get to a HTC device without ripping the sucker open, manually desoldering the flash chip and putting in another.
If you're not getting the tri-color bootloader screen, there is still the possibility of saving it via terminal commands, but it's not straightforward (and depending on what happened it is certainly NOT guaranteed).
Only it can be done.
With the tools mentioned in this here very forum.
Any many people have done it.
Again, you're not doing your research and making claims that are flat out wrong.
1) The Sprint TP2 hardware does support the US GSM frequencies.
2) The Sprint TP2 hardware does not ship with a SIM lock.
3) The Sprint TP2 hardware does ship with the two US GSM frequencies disabled in software.
4) If you pay for the Olinex security unlocker you can easily flash a patched radio ROM which re-enabled the two disabled frequencies.
About the only correct thing said in the post above is that he should not have flashed a radio ROM from a GSM-only TP2 to a CDMA/GSM combo TP2. The two devices do have different hardware so flashing the wrong drivers *IS* a BAD THING(tm).
But, assuming you have paid for the security unlocker, flashing a Sprint TP2 with an updated radio ROM is stupid easy and once you've done that making it work on ATT or TMO in the US requires nothing more than slotting in an active SIM card and switching the phone to GSM mode.
If you don't know the answer to something, please feel free to ASK about it, but don't make unfounded and incorrect statements. When you state an absolute that is false it just spreads misinformation which makes things confusing for other users, especially those new to the device.
Click to expand...
Click to collapse
Prove your lame theory. Links that sprint gsm will connect to US towers. Even links in "this very forum". Different frequencies dude.
My two cents -- as I am new, too -- but I ran into a similar situation trying to update the radio on my Verizon TP2 due to 1X issues. My phone is unlocked as I was running Mighty but decided to return to stock (6.1).
Note: my SIM is not unlocked. If I understand correctly, the SIM needs to be unlocked to be able to install a radio from a different carrier, like Sprint.
[As a side note: I think these forums use the term "radio" a little too loosely because the program to unlock the phone to be able to flash unsigned ROMs is also called a "radio" unlocker.]
Back on topic: I flashed my phone with and unlocked radio 2.23.00WU and the result was similar to what happened to your phone: it did not turn on, orange light was on.
I was able to flash stock ROM back onto the phone using the USB cord and the phone is back to normal. Even though it was basically non-responsive except for the orange light.
My phone is in working order after the wrong radio incident.
I hope this helps.
--
sunNsnow
akademik_acheeba said:
Prove your lame theory. Links that sprint gsm will connect to US towers. Even links in "this very forum". Different frequencies dude.
Click to expand...
Click to collapse
If you believe that you're obviously flat out lying when you make the claim of having worked for a carrier for three years, because no one who worked for a wireless carrier could possibly be this ignorant about how GSM works. It's either that or you're purposely posting false information in a lame attempt to screw with the newbies on this site.
The Sprint TP2 hardware supports all four GSM frequencies - 850, 900, 1800, 1900. You can pull up any spec sheet on the model to see that. This isn't exactly hidden information.
Sprint disables the US frequencies in firmware.
If you are security unlocked you can flash one of the two patched radios in the sticky thread in this forum.
http://forum.xda-developers.com/showthread.php?t=578659
Then you toss an active SIM card into the phone and turn it on while in the US. Set it to GSM mode and bam, you're on a US tower.
Your claim is the equivalent of running around screaming "The sky is GREEN because I say it is! The sky can't be blue. That's false!"
sunNsnow said:
My two cents -- as I am new, too -- but I ran into a similar situation trying to update the radio on my Verizon TP2 due to 1X issues. My phone is unlocked as I was running Mighty but decided to return to stock (6.1).
Note: my SIM is not unlocked. If I understand correctly, the SIM needs to be unlocked to be able to install a radio from a different carrier, like Sprint.
Click to expand...
Click to collapse
The phone needs to be security unlocked to flash a different radio. If it is not security unlocked a unsigned radio will cause the boot sequence to fail. Flashing a carrier provided radio will restore the phone to service.
Security Unlocking means setting the phone to SuperCID. It is different than SIM unlocking.
SIM unlocking allows you to use different SIM cards. It does not allow you to flash unsigned radios.
The Olinex unlocker will both security unlock you (SuperCID) and SIM unlock you (if needed).
if device was security unlocked and is detected by pc, most likely it can be recovered by mtty. unlike my case where device was not sec unlocked but its detected by mtty using usb or serial. bad news is it would be very hard to recover, im doing some jtag research first, at least i found the pins but no pinout.
gamescan said:
If you believe that you're obviously flat out lying when you make the claim of having worked for a carrier for three years, because no one who worked for a wireless carrier could possibly be this ignorant about how GSM works. It's either that or you're purposely posting false information in a lame attempt to screw with the newbies on this site.
The Sprint TP2 hardware supports all four GSM frequencies - 850, 900, 1800, 1900. You can pull up any spec sheet on the model to see that. This isn't exactly hidden information.
Sprint disables the US frequencies in firmware.
If you are security unlocked you can flash one of the two patched radios in the sticky thread in this forum.
Click to expand...
Click to collapse
thats for a radio not rom. find the cdma rom that allows you to use a gsm sim. you cant use the cdma rom over att network...and that link you posted, there are no success stories in it, only complaints. you have no idea what you are talking about. you sit there posting false statements and trying to sound smart with your handy thesaurus. stop posting false statements lame.
Hey there xdadevs, newbie here. I'll try to keep this as detailed and to the point as possible.
Problem
So I've got a Cincy Bell XT720, and I've gotten it properly SIM unlocked and rooted. I'll go to search for networks, consistently pick up Wind Home, and then attempt to connect to it. I'll select Wind Home, and immediately get a notification that says that "Selected network (WIND Home) unavailable", but it'll continue to try to connect to Wind Home. 1-2 minutes later, I'll get a message saying that "Your SIM card does not allow a connection to this network".
What I've Done to Try and Fix It
- Configure APN settings properly
- Reseat SIM Card
- Load Cincy Bell Stock 2.1/Dexter Froyo 2.2/XDA Special RC1 ROMs
- Attempt everything mentioned in this thread here: (http://forum.xda-developers.com/showthread.php?t=974375)
What I think the Problem Is
- Radio/ROM config problem? Can't pinpoint it for the life of me.
- I KNOW it's not a hardware incompatibility problem, if that's a starting point. This is the Milestone XT720 and not the Motoroi, fully capable of supporting the HSDPA 1700/2100 bands that WIND Mobile uses for its 3G networks.
Any help I could get would be greatly appreciated. Right now, my only fallback is this horrid Huawei U1250...it works, but that's like saying that ramen noodles "works" in comparison to a banquet burger with fries. Thanks a ton in advance guys.
Lol, I'm using a CB XT720 on WIND as well, pretty cool. But yeah, mine is working without any issues. Go into a WIND store, show them your issue, and they should be able to replace the sim card. As mentioned in another thread, WIND had some issues with certain sim cards so that may be why your having the connection problems. If that doesn't help, then it's probably something to do with the phone itself.
tharan.a said:
Lol, I'm using a CB XT720 on WIND as well, pretty cool. But yeah, mine is working without any issues. Go into a WIND store, show them your issue, and they should be able to replace the sim card. As mentioned in another thread, WIND had some issues with certain sim cards so that may be why your having the connection problems. If that doesn't help, then it's probably something to do with the phone itself.
Click to expand...
Click to collapse
At least I know that the CB XT720 does work for sure...I can get WIND to check it out (the SIM was ordered back in December or so last year) or even get the phone replaced via Moto warranty if needs be (somehow, still warrantied until March next year). Thanks for the help!
my XT720 is from sigapore and i'm using it on WIND without any issues
using Dexter's froyo ROM
make sure you get the BLACK version of the SIM card, the WHITE SIM cards dies very often
i've replaced both of mines already, they died on their own, both on my Nexus S and XT720
other friends that i've on WIND also had the same problem, with other phones, they also had the WHITE SIM card
just show them the problem, they will change the SIM card for you.
oh! but you need to go to the Corporate WIND stores, not the resellers stores
AllGamer said:
my XT720 is from sigapore and i'm using it on WIND without any issues
using Dexter's froyo ROM
make sure you get the BLACK version of the SIM card, the WHITE SIM cards dies very often
i've replaced both of mines already, they died on their own, both on my Nexus S and XT720
other friends that i've on WIND also had the same problem, with other phones, they also had the WHITE SIM card
just show them the problem, they will change the SIM card for you.
oh! but you need to go to the Corporate WIND stores, not the resellers stores
Click to expand...
Click to collapse
Alright...I'm pretty sure I have the black one (black w/ white trim), but it wouldn't hurt to get a replacement. This one's been in a bricked G1, another G1 that got caught in a torrential thunderstorm (you can tell I don't have good luck with those things), a Huawei U1719, and a Huawei U1250. It's probably just got some age on it by now...flaky with my U1250 anyhow, random (relatively frequent) disconnecting, wouldn't connect the first couple of times, etc. Thanks again, be sure to let you guys know how it goes. =.=
Meh, still got a problem. Tried another SIM, went over to WIND...no such luck. I was told that although the phone may be SIM unlocked and it can see the networks on the 1700/2100 band, the radio's firmware may be locked to prevent a connection (the employee had a similar problem with another phone for Bell). Is there anyone on here who can hook me up with an unlocked radio or a WIND Mobile ROM that could help with this? O-^
Hmmm, strange because I was able to connect to WIND Home on the stock CB 2.1 ROM, Khals MIUI ROM, and Mz's CM6 as well. Perhaps, something is wrong with your baseband? I would try this, if possible, get a friend's sim card (anything but WIND/Mobilicity) and see if you connect to that network whether it be Rogers, Telus, etc. If it can connect, then the phone is able to latch onto the regular GSM frequencies. With regards to an unlock radio or baseband, I'm not sure how thats done but maybe someone else on the forum can help you with that.
For some reason, I'll pop in my Rogers SIM (account was probably deactivated though), and my Moto says:
Emergency calls only
ROGERS
Emergency calls only
Go to check my available networks and..."WIND" is the only one that comes up? No idea as to whether its Home/Away or 2G/3G...just "WIND". Not as if it'll let me connect or anything anyways, same flop as the previous attempts ("Your SIM card does not allow a connection to this network"). :/
http://forum.xda-developers.com/showpost.php?p=10001234&postcount=34 - AHA! Videotron and WIND use the same bands (1700/2100), and some digging around turned that up. Looks like they've been having problems too. Can anyone help pinpoint their radio for me? It seems like that might just do the trick.
Update:
http://forum.xda-developers.com/showthread.php?t=944258#11176044 <- Can someone confirm that this is safe for the XT720? If so, my gut instinct's pretty sure this is exactly what I need...the "freq_F_CN_026-850-2100-signed.zip" one appears to be for Canada, while "freq_F_US_342_107-850-1700-2100-signed.zip" does the frequencies right. O-^
Mann, all I had to do was pop in my sim card and off I went. I think there was a 3G fix around here somewhere, make sure to get someone's "approval" first (one of the more experienced guys) because it may damage your phone. Try this though...
Dial *#*#4636#*#*, go into phone information, and see if anything looks off.
As for frequencies, the country does not matter, the frequencies do...for WIND, you need 1700/2100.
do not use those Defy fixes, it'll probably kill your XT720
RyanGDI said:
http://forum.xda-developers.com/showpost.php?p=10001234&postcount=34 - AHA! Videotron and WIND use the same bands (1700/2100), and some digging around turned that up. Looks like they've been having problems too. Can anyone help pinpoint their radio for me? It seems like that might just do the trick.
Update:
http://forum.xda-developers.com/showthread.php?t=944258#11176044 <- Can someone confirm that this is safe for the XT720? If so, my gut instinct's pretty sure this is exactly what I need...the "freq_F_CN_026-850-2100-signed.zip" one appears to be for Canada, while "freq_F_US_342_107-850-1700-2100-signed.zip" does the frequencies right. O-^
Click to expand...
Click to collapse
Whew, alright. Good thing I asked first, thanks. I still can't get it to work properly...I'm more than likely going to have to ditch this thing and go with a G1 or a Touch Pro 2 if I don't have any better luck with it. Thanks for all the help though guys. :/
Have you flashed a sbf? If so, which one? If not did you buy this phone from Wind or somewhere else? If it is a baseband software problem, then perhaps flashing a different sbf will help (Maybe one of the North American ones-- CBW or brightpoint).
Mioze7Ae said:
Have you flashed a sbf? If so, which one? If not did you buy this phone from Wind or somewhere else? If it is a baseband software problem, then perhaps flashing a different sbf will help (Maybe one of the North American ones-- CBW or brightpoint).
Click to expand...
Click to collapse
STR_U2_04.1E.1_SIGNED_USASHLSTAB14P2XAPCNCBW039.0R_NACBW_P011_A006_HWp3_1FF (Cincinnati Bell)...that's the only .sbf that I can get RSDLite to recognize for some reason. Attempting to pull up one for the UK or the US Brightpoint for example leaves the File Properties section blank and my start button disabled. I have version 4.5.3, if that's any help. Any hope of a miracle here?
Also, I bought it from a third-party in the US...didn't know what carrier it was with, but after some digging around and checking the "S/W" I found it to be Cincinnati Bell. Ideally I'd be looking for a WIND sbf, but I don't think anyone here's managed to get their hands on one. I'm almost at the point of just trying to take it apart to see if there's something loose in the hardware. Someone else on here was saying that there was a loose cable or somewhat that was preventing their UMTS from working properly (can't find the link). Everyone's saying it should be working just fine, I can't really see any alternative besides the baseband perhaps being flaky.
RyanGDI said:
STR_U2_04.1E.1_SIGNED_USASHLSTAB14P2XAPCNCBW039.0R_NACBW_P011_A006_HWp3_1FF (Cincinnati Bell)...that's the only .sbf that I can get RSDLite to recognize for some reason. Attempting to pull up one for the UK or the US Brightpoint for example leaves the File Properties section blank and my start button disabled. I have version 4.5.3, if that's any help. Any hope of a miracle here?
Click to expand...
Click to collapse
Yup, that's the Cincinnati Bell sbf. The brightpoint one is essentially identical but unbranded--the only differences are things like default webpage in the browser and preloaded bookmarks, etc. I don't know a lot about basebands, but I do know the only way to change the baseband firmware currently is with sbf. I think yours is fine, though. AllGamer is our resident WIND expert, so if his advice didn't help, I'm afraid I don't have much more to offer.
Actually, if this is a Cincinnaiti Bell phone, maybe it's SIM locked to CBW...? I know both of mine are. Does anyone know how to test that? SIM locks are also black magick to me.
Yup, that's the Cincinnati Bell sbf. The brightpoint one is essentially identical but unbranded--the only differences are things like default webpage in the browser and preloaded bookmarks, etc. I don't know a lot about basebands, but I do know the only way to change the baseband firmware currently is with sbf. I think yours is fine, though. AllGamer is our resident WIND expert, so if his advice didn't help, I'm afraid I don't have much more to offer.
Actually, if this is a Cincinnaiti Bell phone, maybe it's SIM locked to CBW...? I know both of mine are. Does anyone know how to test that? SIM locks are also black magick to me.
Click to expand...
Click to collapse
Already removed the SIM lock (got that taken care of well beforehand)...I guess I'm on my own then.Thanks everyone, I appreciate the help regardless. :3
RyanGDI said:
Already removed the SIM lock (got that taken care of well beforehand)...I guess I'm on my own then.Thanks everyone, I appreciate the help regardless. :3
Click to expand...
Click to collapse
i have a hunch you are still SIM locked, that error message ("Your SIM card does not allow a connection to this network") you keep having, kinda of suggest that
an easy way to find out, is to see if anyone have an extra unused Cinncinaty Bell's SIM card, and send it to you, so you can pop it in, and if it doesn't give you any error message, but "R"oaming, then that is a good dead indicator that the phone was not properly unlocked.
also in regards to the stock ROMs
you should have no problem flashing any of the .sbf files
my phone was originally an Asian one, then i flashed it to use the UK ROM, and after that i flashed the Dexter 2.2 to it
So are you saying that its possible that an unlock code can "unlock" the device (pass the unlock code request) and allow it to accept a foreign SIM, but still fail to allow it to connect to the SIM's networks? It'd make perfect sense if Rogers was an affiliated network with Cincinnati Bell (for roaming), since it'd be "mutual ground" between WIND and CBW. And then the SIM wouldn't be able to connect to WIND's exclusive 3G network since it was never on the "allowed" networks as defined by Cincy? =.=
if you are in Toronto, i'll suggest you go to P-mall, any of those cell phone stores there can help you unlock the phone for sure
or you can try your luck online with different ways to unlock the phone
quite sincerely we never really talked much about SIM unlocking of this phone within this forum.
perhaps a DEV might be able to help you figure out how to unlock it for free
because if you go to the malls they might charge you an unlocking fee regardless
although with the chinese places you can argue it didn't work, and they will not charge you for the unlocking
Hey everyone, I am a Galaxy Nexus user but my brother got an old Roger's S2 LTE that he wants to put on a non-Rogers network (same one I am on with my GNex). However we are having a weird issue where if we insert the original (deactivated) SIM that came with the phone it detects it. But if we put in either mine or his own it just always says "No SIM Card". I even have a pay as you go AT&T SIM that wont work in it either. So far I have flashed CyanogenMod and tried the UCLF6 radio as well as the Rogers ICS Radio UXLF3 from this thread http://forum.xda-developers.com/showthread.php?t=1754473
I should note that when my brother originally inserted his SIM he got the unlock screen and paid to unlock it through cellunlocker.net and it was recognizing his SIM at that point. Since then however we have had no luck. He even replaced the SIM card board with a new one.
Any ideas? I am leaning towards hardware issue but its odd that it still reads the original inserted SIM
did you try to go back to stock firmware and see what happened
Yep. I'm pretty sure its hardware. I got it to read again but still no signal. I have it reading my AT&T card now but again still no signal.
In fact even without a SIM card in if I search for Network Operators nothing comes up. If I do the same on my GNex I get a listing so its looking like this phone is no good
EDIT: Just realized who responded. Your threads were VERY helpful for me! Thanks so much... I'm still not convinced the phone is toast... I have a friend with a GNex on Rogers (I'm on MTS) so I will see if I can borrow his SIM and see what happens
WoodroweBones said:
Yep. I'm pretty sure its hardware. I got it to read again but still no signal. I have it reading my AT&T card now but again still no signal.
In fact even without a SIM card in if I search for Network Operators nothing comes up. If I do the same on my GNex I get a listing so its looking like this phone is no good
EDIT: Just realized who responded. Your threads were VERY helpful for me! Thanks so much... I'm still not convinced the phone is toast... I have a friend with a GNex on Rogers (I'm on MTS) so I will see if I can borrow his SIM and see what happens
Click to expand...
Click to collapse
agree, not the phone, the only way to make sure of anything is to restore to stock and do all the testing from that point on
edit: dah, its the radio, what freq is the new sim card on that wont work, is it the same as T-Mobile
edit: maybe not radio, think its like rogers, could be network settings
Actually both MTS and Rogers use the same towers so the phone should be set properly.
I've got it reading my MTS SIM now but cant pick up any networks. Its set to LTE/HSPA/GSM (Auto) and MTS is HSPA.
Is there anything that could be done to the IMEI of the phone to sort of "blacklist" it from working on any network?
Here is where I have tested from so far:
Stock before I did anything to the phone (Stock rogers GB)
CM9 Nightly
Stock Rogers ICS
SkyICS
I have also tried both the lastest AT&T Radio as well as the latest Rogers Radio. With my GNex both myself and my friend on Rogers use the same Radio (UGLC1).
At this point it seems either the radios arent working at all or the phone is blocked somehow
EDIT: Info on the MTS network... Found on the FAQ on their site:
Any unlocked devices (i.e. devices that are not tied to a specific carrier) will work with MTS SIM cards (on the MTS 4G network). However, carriers such as Rogers, Bell and Telus lock their devices to work with only their SIM cards and these devices will not work with a MTS SIM card. Similarly, MTS intends to lock our devices to our SIM cards. Therefore, our devices will not be usable on another carrier's network.
Please note that any unlocked device must support 4G North American Frequencies (850Mhz), older GSM devices will not function on our new 4G network. You can find out if your device is 4G compliant by reviewing the phone's settings.
Click to expand...
Click to collapse
Also this link: http://www.howardforums.com/showthread.php/1711666-MTS-4G-frequency
UGLC1 never seen that radio for the skyrocket
edit: oh, for the gnex
did you try the *#2263# menu
Yes when I try that menu (*#2263#) it doesnt do anything. I can do *#*#4636#*#* when on CM9 and it works but on stock and SkyICS it just FCs when I select "Phone Information"...
I am going back to Rogers Stock ICS right now. Gotta head off to my engagement party but will likely be back at it tomorrow
shouldn't forceclose, redl and try reflashing x2 the rogers radio, wipe/format x3 in cwm b4 going back to stock ics
Will do first thing tomorrow (or tonight if I'm still in any shape to do so )
If anyone reading this thread has a stock Rogers phone can you turn it off, take out your SIM and then boot it up without a SIM in it and then do a Network Search and see if anything comes up? On my GNex I get networks but on the S2 LTE I dont. In fact I have never seen any signal from any network on this phone yet with an MTS, AT&T and an old Rogers SIM
EDIT: Actually you will probably have to be on CM9. With stock you cant get to the Network Operator section without a SIM card inserted but in CM9 you can
vincom said:
shouldn't forceclose, redl and try reflashing x2 the rogers radio, wipe/format x3 in cwm b4 going back to stock ics
Click to expand...
Click to collapse
Ok I had enough time to do as you suggested above. Wiped like crazy then went back to stock using the ODIN method and the firmware from sammobile.
Actually I figured it out... it only FCs when I have the AT&T SIM card in and I think thats because AT&T is RAT Locked? If I have no SIM in I can get to all the menus.
k, try to set the freq(play around with it) in that menu w/out sim, then shutdown and install sim b4 restarting, left haptic to click "end" is saving
Got home and went right to work. Almost positive the problem is the radio not working now. I managed to get both SIMs reading without issue but neither will get signal of any sort (even straight after stock reflash). Gonna call it for now until I get a hold of my buddys Rogers SIM.
Thanks so much for all the help, I really appreciate it!
Hi,
I was recently gifted an unlocked ATT S8+ (SM-G955U) which I'm trying to activate to my Verizon account. I've read conflicting information about this, and after going to the Verizon store and calling them directly I'm thoroughly confused.
The rep on the phone told me that the phone is "incompatible" with their network based on the IMEI number. From what I gather, the hardware (and model numbers) on all the major carrier's S8+s are the same and simply have different firmware. I've also read that they're interchangeable. Has anyone successfully gotten the ATT S8+ on Verizon? I'm almost feeling like it's something where I would need to jump through more hoops and speak to a manager to get them to do it, but before I did I wanted to get others input. Thanks!
I heard that the phone will work, you'll need to flash the Verizon firmware onto the AT&T phone.
Thanks Richie. Do you think that Verizon is telling me that the IMEI is "incompatible" because I may need to flash another firmware to enable CDMA? Or are some versions of the S4+ really incompatible on their network.
May there be possible success to get them to activate it anyway?
kebas239 said:
Hi,
I was recently gifted an unlocked ATT S8+ (SM-G955U) which I'm trying to activate to my Verizon account. I've read conflicting information about this, and after going to the Verizon store and calling them directly I'm thoroughly confused.
The rep on the phone told me that the phone is "incompatible" with their network based on the IMEI number. From what I gather, the hardware (and model numbers) on all the major carrier's S8+s are the same and simply have different firmware. I've also read that they're interchangeable. Has anyone successfully gotten the ATT S8+ on Verizon? I'm almost feeling like it's something where I would need to jump through more hoops and speak to a manager to get them to do it, but before I did I wanted to get others input. Thanks!
Click to expand...
Click to collapse
kebas239 said:
Thanks Richie. Do you think that Verizon is telling me that the IMEI is "incompatible" because I may need to flash another firmware to enable CDMA? Or are some versions of the S4+ really incompatible on their network.
May there be possible success to get them to activate it anyway?
Click to expand...
Click to collapse
Do you already have an active Verizon SIM card? Like in another phone?
Mr. Orange 645 said:
Do you already have an active Verizon SIM card? Like in another phone?
Click to expand...
Click to collapse
I do not - only because I'm coming from an S4 (which has the larger SIM card). I had to get a new one.
kebas239 said:
Hi,
I was recently gifted an unlocked ATT S8+ (SM-G955U) which I'm trying to activate to my Verizon account. I've read conflicting information about this, and after going to the Verizon store and calling them directly I'm thoroughly confused.
The rep on the phone told me that the phone is "incompatible" with their network based on the IMEI number. From what I gather, the hardware (and model numbers) on all the major carrier's S8+s are the same and simply have different firmware. I've also read that they're interchangeable. Has anyone successfully gotten the ATT S8+ on Verizon? I'm almost feeling like it's something where I would need to jump through more hoops and speak to a manager to get them to do it, but before I did I wanted to get others input. Thanks!
Click to expand...
Click to collapse
The IMEI thing and Verizon not provisioning your phone to activate on their network is the ONLY obstacle you have.
All the US S8/S8+/Note8 variants are identical and can be cross-flashed to whatever carrier you want. You can easily grab the VZW firmware and flash it on to your AT&T device, fully converting it, however the IMEI won't be in Verizon's system since your particular phone wasn't sold by Verizon.
Somehow get around that and your phone will be fully compatible on VZWs network.
kebas239 said:
Thanks Richie. Do you think that Verizon is telling me that the IMEI is "incompatible" because I may need to flash another firmware to enable CDMA? Or are some versions of the S4+ really incompatible on their network.
May there be possible success to get them to activate it anyway?
Click to expand...
Click to collapse
Don't worry about what Verizon reps are telling you because most often than not they are following a standard procedure. And they only Input your IMEI into a service like this one:https://www.verizonwireless.com/bring-your-own-device/#checkDevice
As your IMEI is for an AT&T phone, the brand model has an A appended at the end (as in AT&T).
However, you should still investigate this issue and try the steps recommended by the other guys. You will be able to use your phone with a VZV sim without reaching to Verizon
kebas239 said:
Hi,
I was recently gifted an unlocked ATT S8+ (SM-G955U) which I'm trying to activate to my Verizon account. I've read conflicting information about this, and after going to the Verizon store and calling them directly I'm thoroughly confused.
The rep on the phone told me that the phone is "incompatible" with their network based on the IMEI number. From what I gather, the hardware (and model numbers) on all the major carrier's S8+s are the same and simply have different firmware. I've also read that they're interchangeable. Has anyone successfully gotten the ATT S8+ on Verizon? I'm almost feeling like it's something where I would need to jump through more hoops and speak to a manager to get them to do it, but before I did I wanted to get others input. Thanks!
Click to expand...
Click to collapse
I have an AT&T S8 + on Verizon's network, had to unlock the phone, I did flash VZV firmware.
Works for me.
Thanks all for the responses! So it does look like I can do it then, but I just need to get Verizon to activate the new SIM. Think if I could find another phone that's compatible, throw the SIM in, activate, then switch the SIM to the S8+ it would work? (Assuming I've flashed the Verizon firmware on it).
Also, I'm trying to find out how to flash the phone properly. I don't really need root, but I'll take it if its easy. Thinking in my scenario, I'd follow this thread, correct?
https://forum.xda-developers.com/ve...opment/rom-s8-allcarriersrootedstock-t3659232
kebas239 said:
Thanks all for the responses! So it does look like I can do it then, but I just need to get Verizon to activate the new SIM. Think if I could find another phone that's compatible, throw the SIM in, activate, then switch the SIM to the S8+ it would work? (Assuming I've flashed the Verizon firmware on it).
Also, I'm trying to find out how to flash the phone properly. I don't really need root, but I'll take it if its easy. Thinking in my scenario, I'd follow this thread, correct?
https://forum.xda-developers.com/ve...opment/rom-s8-allcarriersrootedstock-t3659232
Click to expand...
Click to collapse
Yes, if you can get VZW to activate a nano SIM then all you have to do is pop it in your S8+, and it will work perfectly.
You don't HAVE to flash the Verizon firmware, but you'll won't be able to use certain features such as VoLTE and WiFi calling with the ATT firmware, so I recommend it. Not a necessity though.
To change carrier firmware, follow this thread:
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
Can't help you with rooting. Sorry, I stopped rooting my phones long ago.
Mr. Orange 645 said:
Yes, if you can get VZW to activate a nano SIM then all you have to do is pop it in your S8+, and it will work perfectly.
You don't HAVE to flash the Verizon firmware, but you'll won't be able to use certain features such as VoLTE and WiFi calling with the ATT firmware, so I recommend it. Not a necessity though.
To change carrier firmware, follow this thread:
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
Can't help you with rooting. Sorry, I stopped rooting my phones long ago.
Click to expand...
Click to collapse
This is great information! I'll call back Verizon and knowing all this I have something to back myself up with to at least try to convince them to activate the SIM (if not, I'll find a temporary phone to activate).
Thank you (and everyone else) for all the help!
I was able to get Verizon to activate the SIM and IMEI of the new S8. When I checked my account online to verify, it shows the correct numbers. Unfortunately, the phone is still not able to make calls or connect to the mobile network.
Following this, I rooted and flashed a deodexed stock ROM/firmware that is compatible with all carriers. This made no difference in the issue.
On the status bar, normal reception for my area is shown. There is no data (LTE/3G, etc.) connection, however. In looking at the APN settings, there are multiple Verizon options to choose. "Verizon Internet" (VZWINTERNET) is what is selected. Under the network operators, Automatic is selected. I tried changing it to Manual, but I do not get an option to select Verizon. Only ATT or T-Mobile. Under SIM Card Status, It's says that I'm on an unknown network.
Any ideas on what I could do to diagnose this? Sorry for all the questions, but I want to be able to get this phone to work so bad!
Thanks!
Success! I was about to give up, but decided to try a few more things.
1) To register a new SIM on VZW, it needs to initially go into a VZW based phone to work correctly. Once doing this, I saw some changes:
- I could now see my phone number.
- Verizon was an option under the network operators setting.
This did not solve my problem, however, as I still could not connect to the network. When selecting VZW, the request would fail and say to try again later. So onto the next (and last!) thing I did...
2) Download VZW firmware and flash via ODEN (The Comsey version, but I don't think that matters). I added the BL, AP, CP & CSC (included in the zip file) using the default options. I found this firmware at the below link and grabbed the latest version. The download was very slow for me (I had to run it overnight), but numerous posters stated that they are a reliable source so I took a chance.
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955U1/VZW/download/G955U1UES2AQL1/201500/
I'm just so glad everything is working now. Thank you so much to all who have responded to the thread to guide me in the right direction! Hope this helps someone else who may be having the same trouble.