Related
Hi,
I have one Polaris, and want to see protocol information,
so does any method to enable the diagnostic port for QXDM.
Thanks.
Does cdma workshop work with the nexus s? nexus s 4g? looking to get in there and alter what I can...hopefully the eri banner. thank you!!
edit: any other way to get in there would be good too. looking to change the sci, accolc, eri, etc, etc. thanks!
I am looking for the same thing.
If I can get the phone into diag mode, I should be able to get it working.
I am having trouble figuring out how to enter the diag mode.
The normal methods (##Code) doesn't work.
I played with CDMA Workshop earlier after installing EPST and have it not working. It looks like it would need a modified dongle to get the Nexus to enter DL or modem mode as the ## codes don't work. Using all other modes I can't seem to get the program to recognize I have the phone plugged in. I could be missing something but have yet to find anything relevant as a CDMA Nexus is the new crittter on the block.
Update on my previous post, to get the NS4G into D/L mode you hold both volume keys down while pressing the power on button for just a second. Now I just need to find the drivers for this mode.
Got it working!
Here are the steps. I am using Windows 7, I have the Android SDK installed, and Windows update gave me the drivers I need.
1. Make sure USB debugging is off.
2. Dial *#*#8778#*#*
3. Change both settings to Modem.
4. Windows 7 will install your drivers.
5. Add the correct com port, in QPST Config.
6. Open QPST Service Programming, and your all set.
tanman21 said:
Got it working!
Here are the steps. I am using Windows 7, I have the Android SDK installed, and Windows update gave me the drivers I need.
1. Make sure USB debugging is off.
2. Dial *#*#8778#*#*
3. Change both settings to Modem.
4. Windows 7 will install your drivers.
5. Add the correct com port, in QPST Config.
6. Open QPST Service Programming, and your all set.
Click to expand...
Click to collapse
unfortunately, i need the samsung drivers seeing as how my mobile is my web connect.
anyone have the drivers to install??
edit: got it...somehow I found the drivers and got them installed...
tanman21 said:
Got it working!
Here are the steps. I am using Windows 7, I have the Android SDK installed, and Windows update gave me the drivers I need.
1. Make sure USB debugging is off.
2. Dial *#*#8778#*#*
3. Change both settings to Modem.
4. Windows 7 will install your drivers.
5. Add the correct com port, in QPST Config.
6. Open QPST Service Programming, and your all set.
Click to expand...
Click to collapse
got it!
i can view everything in cdma workshop. but when i click 'write', it tells me phone is asking for spc(6 digits). i assume this is my msl which i havent gotten yet for this device...
where do i enter the spc so that i can write changes? thank you!!!
edit: got my msl but i dont think its helping here...my main goal is to alter the sci, which i cant do without cdma workshop, yet. id also like to change the banner but nothing seems to be sticking. thanks for the help!
gotta change the banner, sci...
Last day of classes seems like a good time to tackle this issue.
Gonna continue tinkering around...hopefully we can change the SCI and eri banner(want mine to read 'Google' or 'Nexus S 4G').
Any help would be much appreciated and yield you a wookie life debt. Thank you!!!
Still messing around and I cant seem to find a way to make these alterations. Anyone else have any better luck? Skills?
Thanks!!!
Thanks for the dialer code .. much quicker than decompiling the apk.
I saw references to MSL in this thread and google brought it up as the first result for the ns4g, but no mention of how to obtain it.
For those wondering, getprop | grep MSL will show the MSL. If you don't have busybox installed (for grep), just type getprop after you after root in adb shell or terminal emulator/connectbot and scroll through the list of output, MLS will be in there.
Hope this helps save some time for people! Thanks Samsung and Google for keeping it simple! Thanks for this helpful thread!
when i change them both to modem nothing happens, what do di do when i change them.
with my unrooted s4g, i can access the info in cdma tools. i can connect, read the settings...when i attempt to write changes, sometimes it tells me the phone is requesting the spc. other times it will write certain things and fail writing others..regardless, nothing sticks. frustrating...hopefully i can hold off on rooting again until the 3d comes out...gotta be a way to make it happen without rooting(wishful) or editing eri.xml but if this the only way to make changes to sci, banner, etc; im gonna have to wait until i play with the evo3d...really dont wanna wipe data again
WITH BOTH QPST AND CDMA WORKSHOP, I AM ABLE TO READ THE PHONES SETTINGS BUT I CANT WRITE TO IT. woops, sorry bout the caps.
anyway, when i click write, some things write and others dont. then when i click read, the banner is recognized as google even though it reads sprint on my phone still. often time when i click write in cdma workshop, it tells me phone is requesting spc, spc is required.
update: it seems that the sci and access overload class have stuck to the values that i chose. however, the main goal for me is to alter the banner to read 'Google'.
any input is much appreciated. thank you!
By any chance, are there any tutorials or has anybody successful flashed a Hybrid PRL USING cdma workshop??
Samsung phones such as the Moment and Epic 4g need 'default password' sent to unlock the nvitems to be writeable. Has anyone thought of this or tried this? Maybe the Epic 4g password works?
USB Device Not recognized
Guys i need help i tried everything already!!! My nexus s when i connect the phone to the computer does recognized everything except when i tried to go on modem mode. Do u guys have any clue how to fix this?????
I've been able to flash prl with qpst.
I'm not certain why qpst or the like wouldn't recognize your device.
Sent from my Nexus S 4G via XDA Premium
USB Device Not recognized
it's not the program that is not recognized the phone is my computer that's not recognized my phone on modem mode. i really don't know what's wrong i tried to update the drivers but the computer still no recognizing the phone? what's the procedure that u are taking to get your phone recognized by your computer? (i am using windows xp sp3)
pilussa85 said:
it's not the program that is not recognized the phone is my computer that's not recognized my phone on modem mode. i really don't know what's wrong i tried to update the drivers but the computer still no recognizing the phone? what's the procedure that u are taking to get your phone recognized by your computer? (i am using windows xp sp3)
Click to expand...
Click to collapse
you got the sammy drivers installed? pda net? android usb driver?
yes i did.
INTF2 Driver / ETS / VPST
Here is missing INTF2 Driver / the hard to find programming tools all in one spot!
I have experimented for a while and found this driver. I remote flash alot of devices but even though I now obtained this missing driver, it is still not reading in full DIAG MODE no matter what I choose after ENABLING the HIDDEN MENU *#22745927 - and DIAG MODE OPTIONS **87284.
Samsung has made this missing driver a complete hidden secret right in the default driver package!
Hoping others that are trying to flash this device to other CDMA Carriers can help finish this project as there are no resources available yet.
Here is the steps to get that driver installed properly:
1) Leaving your device UNPLUGGED, Install the SAMSUNG USB DRIVER FOR MOBILE PHONES here: SAMSUNG_USB_Driver_for_Mobile_Phones_15160.exe - 14.07 MB
2) Plug your phone into your PC
3) Dial *#22745927 to enable the hidden menu, then tap OK. (If ever asks for a code, it is 000000)
4) Dial **87284 And under UART select PDA / Under USB Select CDMA MODEM
5) Open your Device Manager on your PC and verify you are still missing the INTF2 Driver
6) Right Click that missing driver notification and select UPDATE DRIVER
7) Choose BROWSE MY COMPUTER FOR DRIVER SOFTWARE option (NOT THE AUTO OPTION! windows won't find it)
8) Select LET ME PICK A LIST OF DEVICE DRIVERS ON MY COMPUTER
9) wait for the driver MANUFACTURER list to show up results and select SAMSUNG
10) Under MODELS select SAMSUNG HSP PLUS MODEM DRIVER
11) Hit NEXT and OK to install
12) Verify Driver successfully installed. You will see it is Under MODEMS in your Device Manager with its own assigned PORT.
****NOW THAT I HELPED YOU PLEASE REPLY HOW TO GET OUR CDMA WORKSHOP / ETS / VPST / ETC TO READ THIS DEVICE IN DIAG MODE SO WE CAN ALL FLASH IT TO OTHER CARRIERS! I AM SHARING LINKS TO THOSE DIFFICULT TO FIND APPS BELOW *****
NOTE: Page Plus Cellular has an OPEN HANDSET POLICY in which means they allow any device that can be possible flashed into their network. Making all this perfectly legal
"All we need is the very final step to get this thing to read on any of those flashing software listed above...."
Yes we now own this device, the Evo 3D, and the Evo 4G We will be developing Roms for this device soon!
To Bypass the Activation Screen:
1) Press the emergency call button.
2) Then dial *#83786633
"Soft Keys Now Enabled"
3) Press the home key.
Other steps Attempted for PC Diag Mode:
1) Remove SIM Card, turn on the phone.
2) Connect the phone to PC, Install VIA Telecom USB Driver.
3) Dial **87284, choose USB > CDMA Modem
4) While the phone still connected to PC, Dial **33284 and then
go to ETS Channel. If it's already on USB, change it to DPRAM
and then back to USB.
5) Dial **583, choose Enable CDMA Mode.
Flash / Unlock Programming Tools:
VPST: VPST_4.4.16_1_.msi - 25.77 MB
ETS: ETS(8.5.17.0)_1_.exe - 20.26 MB
**A Very Helpfull Post by autoprime & dexter35803: http://forum.xda-developers.com/showthread.php?t=1696621
What can be achieved with this?
Re: INTF2 Driver INSTALL---FINALLY!!!!
Yeah ditto... Explain what this means to us?
Sent from my SCH-I510 using xda app-developers app
Purpose of a missing PC USB driver
chefthomas99 said:
Yeah ditto... Explain what this means to us?
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
I have worked hard trying to flash this device to other carriers. If you are not looking to get out of Verizon than this does nothing for you. No one is sharing at all how to flash this phone to Page Plus / Cricket Wireless/ etc meaning lack of open source unlock support on this device compared to the Galaxy S3 / Note 2/ etc. This Post shows 1 step closer to flashing this device to another carrier (All drivers should be obtainable). If someone knows how to flash to Other Carriers using this driver, please reply and help others. I can do many device except this one. If you Google this, you will find no answers to even obtaining this driver as I have looked myself (People saying not possible cause it is a Via Chipset and all). I may be in the wrong section and possible need to be in the Q&A. Not sure... If I need to move this Post, please let me know. Thanks!
This is pretty sweet. I'm sure there are at least a few folks out there who would find this helpful.
There's some sort of thread on here by the name of something like "QPST instructions?" but my search returns nothing.
Sent from my SCH-I510 using xda premium
kvswim said:
There's some sort of thread on here by the name of something like "QPST instructions?" but my search returns nothing.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Yep. Unfortunately QPST won't work on this device. We use it on all other devices but this one has a Via Chipset. QPST only works on QUALCOMM chips like Galaxy S3, Note2, Evo, etc... I really appreciate you inputs! This post is to hopefully help all in this work-in progress.
Sent from HTC Evo running AlienMOD Series III Beta (Sony X10 spoof) using xda app-developers app
I've succesfully flashed a Droid Charge to my local carrier, but no Data yet.. Voice only. All you have to do is flash Sprint Galaxy Nexus CDMA Radio via odin, reprogram the phone using ETS, and you have to call *583 on every reboot and then choose CDMA Mode ( ..or CDMA Only, I forgot )
This is the radio :
Sprint Galaxy Nexus FC12 Radio
and this is proof :
http://www.youtube.com/watch?v=X6TlHwZTpYU
More information :
http://forum.xda-developers.com/showthread.php?t=1696621
Good luck
robbiejobs said:
I've succesfully flashed a Droid Charge to my local carrier, but no Data yet.. Voice only. All you have to do is flash Sprint Galaxy Nexus CDMA Radio via odin, reprogram the phone using ETS, and you have to call *583 on every reboot and then choose CDMA Mode ( ..or CDMA Only, I forgot )
This is the radio :
Sprint Galaxy Nexus FC12 Radio
and this is proof :
http://www.youtube.com/watch?v=X6TlHwZTpYU
More information :
http://forum.xda-developers.com/showthread.php?t=1696621
Good luck
Click to expand...
Click to collapse
Cool! I am trying it right now Will post results
robbiejobs said:
I've succesfully flashed a Droid Charge to my local carrier, but no Data yet.. Voice only. All you have to do is flash Sprint Galaxy Nexus CDMA Radio via odin, reprogram the phone using ETS, and you have to call *583 on every reboot and then choose CDMA Mode ( ..or CDMA Only, I forgot )
This is the radio :
Sprint Galaxy Nexus FC12 Radio
and this is proof :
http://www.youtube.com/watch?v=X6TlHwZTpYU
More information :
http://forum.xda-developers.com/showthread.php?t=1696621
Good luck
Click to expand...
Click to collapse
Would this work in Samsung Galaxy S Aviator R930 (it's the same phone, this is US Cellular Droid Charge Version) ???
I was able to get to the ETS Channel set up, and changed it to USB, DPRAM.
I also did the the UART and USB changed to PDA and MODEL, respectively.
Tried both in MODEM too.
But neither option allowed me to read the phone on ETS or VPST.
CWS/QPST doesnt work either.
I am able to change the MIN, SID, etc. due to a service menu ##8778#, but havent been abe to flash the PRL.
Regards,
JB
Here is the intf2 at diagnostic port driver
This is a better matched driver for those of you who need it. also attached sprint ga02 cdma radio that i edited in hex editor. you will now see I515fk02 in bootloader,about phone and in ets.
I think your PC is trying to install these drivers because you have 'Fast Charge' enabled.
AJ Bryant said:
I think your PC is trying to install these drivers because you have 'Fast Charge' enabled.
Click to expand...
Click to collapse
...interesting thread...
I don't want to be "that guy" but...
I sorta doubt that a custom kernel with fast charge support
...or the script to enable it below...
has much to do with the USB drivers as detailed by the OP.
Code:
#!/system/bin/sh
#Script to activate force_fast_charge on boot via init.d
echo "1" > /sys/kernel/fast_charge/force_fast_charge
...correct me if I have misspoken...
I'm sure that's the reason..
jheide44 said:
...interesting thread...
I don't want to be "that guy" but...
I sorta doubt that a custom kernel with fast charge support
...or the script to enable it below...
has much to do with the USB drivers as detailed by the OP.
Code:
#!/system/bin/sh
#Script to activate force_fast_charge on boot via init.d
echo "1" > /sys/kernel/fast_charge/force_fast_charge
...correct me if I have misspoken...
Click to expand...
Click to collapse
Hi, all expert
I bought the Verizon M8 for windows, I am in China now, due to bands different, M8 only support 3G. But now some guys had change android M8 data to support 4G for China Telecom/Unicom by QPST, so I want to try that and let my M8 for windows support 4G.
So I topic lots of documents... due to M8 is my first WP, not familiar the system, so take amount time...
Now I found QPST 2.7.348 couldn't recognize my M8...
Need your kindly help...
Follow detail step and pic:
1. enable DM mode for M8 by ##634# -> Diag -> enable diag mode
2. link to PC (windows 8.1), and can found 3 port and 1 unavailable port:
http://1drv.ms/1wI6SEk
3. after open QPST, couldn't recogonize :
http://1drv.ms/1xAdS2I
4. don't know whether unavailable port is importanct, I need get a driver, after checked, I use follow tools to install winusb driver for the port
http://zadig.akeo.ie/
5. unfortunately, after install driver, same issue, change older verson for QPST, can found usb/QC diagnostic ports, but display "no phone":
http://1drv.ms/1wHR8RV
Now I have no any idea. Only want to link M8 by QPST.
Thanks
Yong
Im in trouble, too.....
Though Band3LTE is available, W8 is not enabled in LTE BC Config (NV 6828)
I want to have access to diag to enable it, but cannnot do it...
I post another ticket, find driver, but qpst not work
http://forum.xda-developers.com/showthread.php?t=2977549
HTC M8 for Windows
hi,everyone,i am new here,i have opened the diag port on pixel,and installed the qualcom driver.But when i add the diag port in qpst,always say this port may not working,anyone can help me?my qpst version is 2.7.434
Qualcomm 9008 bricked Pixel-diag port
Hi, I know that this is an old post, but I have a bricked pixel phone and have been trying to use qpst to reinstall os. So far no luck since the elf and XML files can't be found. One of the other ways I was going to try was to open the diag port and then try to use Linux to write the os files to the partitions. However, I haven't been able get the diag port open. How did you get the port opened?