Is there any method to log by QXDM for Polaris? - Touch Cruise General

Hi,
I have one Polaris, and want to see protocol information,
so does any method to enable the diagnostic port for QXDM.
Thanks.

Related

[Q] Is it possible to change NV Items in WM?

Hello, is it possible to change a NV Item by using a cab file , for instance?
I can change it by using QPST/QXDM but I'm wondering if a cab file could do the trick.
Tks,
Jeffrey
any clue? please!
Hypothetically it's possible and some vendors have left backdoors to access NVRAM from the OS, but I doubt there's a tool readily available that exploits these. So short answer is: no
do you know any AT command that would sticky the phone to GSM only? I tried a lot of them (AT+BANDSEL, etc etc..) none seems to work..
I'm trying to lock one MSM 7201 to gsm mode... I can do it using QPST/QXDM but I want to do this in the windows mobile.... tks!

[Q] Problem with QXDM

Hello,
First, sorry if I put this in the wrong section but I have searched and cant seem to find an answer anywhere else.
Is anyone else having a problem getting QXDM to start up? I have had it on my computer for about 3-4 months now and have used it a few times (Last time I remember for sure using it was about 3 weeks ago) I tried to use it today and I get an error after the little QXDM box pops up in the middle of my screen now. The error reads "Error initializing DIAG server" I tried uninstalling the program and re-installing but that does not help either. I am pretty sure it is version 3.09.19, is it maybe an old outdated version now?? Does anyone have a link to a newer one if that is the case? I just can't think of anything I have done to my computer recently that would have caused this problem? Does know what caused this and can help me fix it please?
Thanks in advance guys, you rock! I have learned alot from here but I am still a little bit of a noob so please do not laugh
****NEVERMIND*****
A member already helped me
How did you manage to bypass the error?
PM me and I will help you if you still need it
Hello, I'm new to this site. I recently Bricked my phone and restored using the Lgnpst and now i'm at 000-000-0000... i've read just about every forum and have installed QPST and QXDM. when I try to run QXMD i get the DIAG Server Error.. I see someone has figured a way around this issue.. If you can help me I'd greatly appreciate it..
can you please let me know how to bypass this problem?
Check your pm alot of times running as administrator will solve the problem
I am having the same issue.
"Error initializing DIAG server"
Thanks for anyone who can help me with this.
im also having this problem. can anyone help
***update: running as administrator helped me
If that would only work for me Id be in business, but it does not work for me. still looking for a solution.
Got it finally... for some reason QPST needs to be installed in the Qualcomm directory also on my pc. But I got it working now.
Thanks to my new found buddy Klown80 got it working.
i am getting the same error i already zero'd my phone and now when i try to open qxdm it gives me that error "Error initializing DIAG sever":crying: i already tired running with admin right and compatibility mode win xp serv pk 3 and just regular win 7
I am trying to use QXDM to repair my cell phone. I jut reinstalled it today and when I try to run it I get this message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item". I am the admin on my computer and have also tried to run the program as admin but still get the same message. Any help would be greatly appreciated. Thank you.
<Reformated my computer lastnight and it seemed to fix the problem.>
Copy Bin to Desktop and try again
piglet2009 said:
i am getting the same error i already zero'd my phone and now when i try to open qxdm it gives me that error "Error initializing DIAG sever":crying: i already tired running with admin right and compatibility mode win xp serv pk 3 and just regular win 7
Click to expand...
Click to collapse
Copy the BIN folder from the QXDM to the desktop and try opening that from there.
Error initialising DIAG server
I am also facing the same problem while launching the QXDM tool.
when small pop window of QXDM appears after that i get the error as Error initialising the DIAG server
If u r able to fix your problem can u please tell me what is the problem and what should i do to fix it.
same problem... all i want is to change the esn of my droid x back to what it was before my friend effed it up... *sigh* qxdm says "error initializing diag server" and qpst says "could not find the qpst server 'mycomputer', HR = 0x80004002" ... all i want is to fix this dang phone!! it was soo easy last time QPST and QXDM worked right away with no problems
QXDM - failed to initialize diag server
Hi all
New to this group. can anyone help me out with problem of starting qxdm on my windows 7 ( 32 bit)- i am getting an error - failed to initialize diag server , i am using administrator and also the qpst is loaded in the folder qualcomm
version of qxdm - 3.14.634
version of qpst - 2.7.366
Thanx in advance
Help please!
Hi all, guys i am getting the "error initializing the DIAG server" message
I could not find a solution anywhere.
I tried running as an administrator and moving bin folder to desktop. any other idea??
thanks in advance
Hello i got the smaeerror ... tried allready all ...but QXDM wants start!
how to fix it?
Klown80 said:
Check your pm alot of times running as administrator will solve the problem
Click to expand...
Click to collapse
Running as administrator actually giving the problem. If i click it straight way, it opens but fields are greyed out in NV browser.
kkoolkaran said:
Running as administrator actually giving the problem. If i click it straight way, it opens but fields are greyed out in NV browser.
Click to expand...
Click to collapse
Managed to run QXDM without administrator privileges and get the fields in NV browser to become editable, provided that QPST has connected to the target port (not port that keeps switching and cause phone to reboot repetitively. This previous condition was fixed by flashing another Android 4.1.2-based ROM over the previous 2.3.5-based ROM). Learnt that the editable value in "Input" column becomes editable with a 3-click command from mouse.
I am facing issue with I can try qxdm installation but once running it, it is showing qxdm tool is already installed. If u know any one please help me quickly and ASAP.

[Q] DFS - cdmawork shop

would any one know how to get cdma work shop or DFS tools to Recognize or detect photon Q. as a com port assignment with in device manager?
currently the photon shows up as another drive not as a com port assignment so that i can get in to it with cdma workshop or DFS
any help would be great
thanks
Jc

[Q] How to let QPST recognize M8 for windows?

Hi, all expert
I bought the Verizon M8 for windows, I am in China now, due to bands different, M8 only support 3G. But now some guys had change android M8 data to support 4G for China Telecom/Unicom by QPST, so I want to try that and let my M8 for windows support 4G.
So I topic lots of documents... due to M8 is my first WP, not familiar the system, so take amount time...
Now I found QPST 2.7.348 couldn't recognize my M8...
Need your kindly help...
Follow detail step and pic:
1. enable DM mode for M8 by ##634# -> Diag -> enable diag mode
2. link to PC (windows 8.1), and can found 3 port and 1 unavailable port:
http://1drv.ms/1wI6SEk
3. after open QPST, couldn't recogonize :
http://1drv.ms/1xAdS2I
4. don't know whether unavailable port is importanct, I need get a driver, after checked, I use follow tools to install winusb driver for the port
http://zadig.akeo.ie/
5. unfortunately, after install driver, same issue, change older verson for QPST, can found usb/QC diagnostic ports, but display "no phone":
http://1drv.ms/1wHR8RV
Now I have no any idea. Only want to link M8 by QPST.
Thanks
Yong
Im in trouble, too.....
Though Band3LTE is available, W8 is not enabled in LTE BC Config (NV 6828)
I want to have access to diag to enable it, but cannnot do it...
I post another ticket, find driver, but qpst not work
http://forum.xda-developers.com/showthread.php?t=2977549
HTC M8 for Windows

need help for qpst

hi,everyone,i am new here,i have opened the diag port on pixel,and installed the qualcom driver.But when i add the diag port in qpst,always say this port may not working,anyone can help me?my qpst version is 2.7.434
Qualcomm 9008 bricked Pixel-diag port
Hi, I know that this is an old post, but I have a bricked pixel phone and have been trying to use qpst to reinstall os. So far no luck since the elf and XML files can't be found. One of the other ways I was going to try was to open the diag port and then try to use Linux to write the os files to the partitions. However, I haven't been able get the diag port open. How did you get the port opened?

Categories

Resources