A few days before, i tries to install android on my wave 525... But after installing android , my mobile didn't opened. I even can't go to download mode.. so i gave it to repair.. I don't know what they did... they install the older firmware.. so, i decided to install new firmware.. but after installing it my mobile keeps restarting..even downloaded 3-4 firmware from different sites.. but nothing happened... And samsung kies said that "Your model does not support updating from samsung kies" ...What to do?? :crying::crying::crying::crying::crying::crying::crying:
Even I bricked my Samsung wave 525 - No Solution yet
shirish893 said:
A few days before, i tries to install android on my wave 525... But after installing android , my mobile didn't opened. I even can't go to download mode.. so i gave it to repair.. I don't know what they did... they install the older firmware.. so, i decided to install new firmware.. but after installing it my mobile keeps restarting..even downloaded 3-4 firmware from different sites.. but nothing happened... And samsung kies said that "Your model does not support updating from samsung kies" ...What to do?? :crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I tried to find firmware from different sites, xda but the only place i went was hotfile .com and that has been closed.
So the problem is I don't know which firmware will work on this phone German/ European or what so ever.I've multiloaer 5.65, I just need the amss file please developers help asap
ksssalman said:
I tried to find firmware from different sites, xda but the only place i went was hotfile .com and that has been closed.
So the problem is I don't know which firmware will work on this phone German/ European or what so ever.I've multiloaer 5.65, I just need the amss file please developers help asap
Click to expand...
Click to collapse
I googled Samsung Wave 525 --> GT-S5250
Found working firmware. BUT i wondered its BADA 1.1
Here is the link --> DOWNLOAD
Grüße und viel Erfolg
Related
Service-centre installed firmware I9003DDKp1 (india) - no root/deodex/nothing - absolute stock, absolutely no custom stuff
did the *#272*IMEI thing - CSC shown is INU (im from india)
when i connect the phone to Kies, it shows "your device does not support software upgrading via Kies" as per attached file
any ideas or thoughts to resolve would be appreciated
to which version u wany to upgrade???
vishal24387 said:
to which version u wany to upgrade???
Click to expand...
Click to collapse
i9003DDKP4
pls advise regarding non-Odin solutions
its not ddkp4. Its actually ddkp2. U can upgrade it via odin. Kies update software is most stupid software.
spm123123 said:
"your device does not support software upgrading via Kies"
Click to expand...
Click to collapse
I got the same message some days before the update was avaible in my country. You'll probably be able to upgrade your phone soon, just wait.
loSconosciuto said:
I got the same message some days before the update was avaible in my country. You'll probably be able to upgrade your phone soon, just wait.
Click to expand...
Click to collapse
that cant be it ... the update has already been released and others have already updated
If you know how to flash...just flash DDKP2 using odin twice
I got the same problem. After waiting for months, I reflashed it with odin. So no other way except odin or samsung service center for us.
update through odin ... sammykies the most ever stupid flash program
odin is very easy
hi!i am from india.
I have galaxy tab 2.when i check in settings for update tab says no update available but kies says new firmware available.but when i click update device connection get lost and reconnect.pls help me.and also tell me which is latest firmware rolled out by samsung here?
Droidlover123 said:
hi!i am from india.
I have galaxy tab 2.when i check in settings for update tab says no update available but kies says new firmware available.but when i click update device connection get lost and reconnect.pls help me.and also tell me which is latest firmware rolled out by samsung here?
Click to expand...
Click to collapse
Hey..Even i am facing the same problem.
i guess there must b some kind of modes like download mode or recovery mode in which we have to boot our device..the problem is even i dont know as well as the samsung customer care .
I am also facing the same prbm
Same here, but i have odin
Hi guys , first post here. I got a new note 10.1 and as soon as possible i conected it to my PC through kies too ser if jelly bean was already available for me. It wasnt ( here in Brazil cell upgrades take a while ) . A few weeks later, after installing some programs, kies does not even searches for firmwares. And if i manually asks it to look for firmware upgrades, it says my device does not support initializing. Ive already reinstalled it but the problem is still there. Kies recognizes and upgrades my Galaxy s2. The tablet is non rooted and i already uninstalled other launchers. I appreciate any comments.
http://forum.xda-developers.com/showthread.php?t=1978840
A guide on how to reinstall stock firmware without flashing by using KIES
Unfortunetly when i get até this point " Just go up to the top bar and choose firmware upgrade and initialization." ( third image ) , Kies says* my device does not support initializing.
Go to Sammobile and download the software for your region, Download ODIN and flash with that.
Don't know how to use ODIN, use search... ODIN has been around since the 1st Android Samsung phone....
ultramag69 said:
Go to Sammobile and download the software for your region, Download ODIN and flash with that.
Don't know how to use ODIN, use search... ODIN has been around since the 1st Android Samsung phone....
Click to expand...
Click to collapse
Ok, but i still have other questions:Will I void my warranty? Do I have a faulty unit? If I hard reset , will the result be the same? Tks in advance.
malandrex said:
Ok, but i still have other questions:Will I void my warranty?
>>>Root or custom rom voids warranty not stock rom .
Do I have a faulty unit?
>>>>Ask a service centre .
If I hard reset , will the result be the same?
>>> unknown try it but it will/ may wipe all data .
jje
Click to expand...
Click to collapse
Hello! Im new on this forum.Recently,I bought a Samsung Galaxy A10 (SM-A105F) and I want to root them.I used Odin 3 and after reboot stucked in download page and says: only official binaries are allowed to be flashed.Please give me a link with stock firmware to help me(+intructions).Im and noob and i was wrong (
Thanks!
eu_sunt_mircea said:
Hello! Im new on this forum.Recently,I bought a Samsung Galaxy A10 (SM-A105F) and I want to root them.I used Odin 3 and after reboot stucked in download page and says: only official binaries are allowed to be flashed.Please give me a link with stock firmware to help me(+intructions).Im and noob and i was wrong (
Thanks!
Click to expand...
Click to collapse
You can use websites like sammobile or updato to download firmware. You will have to search for you model number and region/carrier.
Or for the latest firmware use PC apps like samfirm or frija.
https://samfirmtool.com/samfirm-v0-3-6
https://forum.xda-developers.com/galaxy-s9/how-to/tool-frija-samsung-firmware-downloader-t3910584
hi guys
i bought a used j7 pro so i found it on nougat so i just download official rom on pie and install it with odin but after that the touch stop working i try to downgrade to oreo the same after downgrade the logo became(samsung j7 not samsung j7 pro ) now any rom i iinstall it fail on odin i just want android 9pie or costum rom with fix touch i search on youtube many sites without results please help and when i bring it to repaire shop he says that the screen is changed before ok any help knew that j730fxxu5csg2
thanks
it will fix
hi , don`t worry
1-you flashed a wrong firmware on your device. it happens sometimes!
2-if you are not sure about your screen touch , only thing you have to do is flash a combination file , than test your screen touch.
3-if in odin you face with any fail error,than we should know which part is.give us picture!
4-if error appears at the beginning of process than it related to PIT file.
good luck
NOTE:get the combination file for J7 PRO , not j7.
i.daniyal said:
hi , don`t worry
1-you flashed a wrong firmware on your device. it happens sometimes!
2-if you are not sure about your screen touch , only thing you have to do is flash a combination file , than test your screen touch.
3-if in odin you face with any fail error,than we should know which part is.give us picture!
4-if error appears at the beginning of process than it related to PIT file.
good luck
NOTE:get the combination file for J7 PRO , not j7.
Click to expand...
Click to collapse
hi thank you sir to reply me but the problem is not in the firmware
1-i try the official and it done with odin j730fxxu6 android pie after that also the touch dont work ok
2-i try combination file and the touch work no problem
3-i found on youtube a fixed touch file using twrp but is for j730gm anroid 7.0 i tried it it succes with twrp but the problem is maybe each 1 hours stop the phone and run again also there is no network i think because is not the same model
--> my problem is i need a fix touch file for my model j730fxxu6 android pie i try to downgrade but always fail because all of file of downgrade on binary 4 ,3 , 2 , 1 i dont find one of u6 can you help please i found file of u6 in website called halabtech but is paid also not haven the same ways to pay im in trouble if i give it to shop repair it demande to change all the screen is about 150dollar
http://ftp.needromarab.com/7800/J730F-J730FD-Fix-Touch-Android-9-0-Binary-U5-Under-Test-
but its u5!!!you can`t downgrade your binary!!!
you have to downgrade your modem to fix it!i serf the net a lot !but i can`t find one.sorry
i.daniyal said:
http://ftp.needromarab.com/7800/J730F-J730FD-Fix-Touch-Android-9-0-Binary-U5-Under-Test-
but its u5!!!you can`t downgrade your binary!!!
you have to downgrade your modem to fix it!i serf the net a lot !but i can`t find one.sorry
Click to expand...
Click to collapse
i dont know how but the binary is changed form u5 to u6
only thing you can do is wait for u6 fix file!!!
or u can take ur fon to a mobile repair! EFT dongle may help!