Hi guys , first post here. I got a new note 10.1 and as soon as possible i conected it to my PC through kies too ser if jelly bean was already available for me. It wasnt ( here in Brazil cell upgrades take a while ) . A few weeks later, after installing some programs, kies does not even searches for firmwares. And if i manually asks it to look for firmware upgrades, it says my device does not support initializing. Ive already reinstalled it but the problem is still there. Kies recognizes and upgrades my Galaxy s2. The tablet is non rooted and i already uninstalled other launchers. I appreciate any comments.
http://forum.xda-developers.com/showthread.php?t=1978840
A guide on how to reinstall stock firmware without flashing by using KIES
Unfortunetly when i get até this point " Just go up to the top bar and choose firmware upgrade and initialization." ( third image ) , Kies says* my device does not support initializing.
Go to Sammobile and download the software for your region, Download ODIN and flash with that.
Don't know how to use ODIN, use search... ODIN has been around since the 1st Android Samsung phone....
ultramag69 said:
Go to Sammobile and download the software for your region, Download ODIN and flash with that.
Don't know how to use ODIN, use search... ODIN has been around since the 1st Android Samsung phone....
Click to expand...
Click to collapse
Ok, but i still have other questions:Will I void my warranty? Do I have a faulty unit? If I hard reset , will the result be the same? Tks in advance.
malandrex said:
Ok, but i still have other questions:Will I void my warranty?
>>>Root or custom rom voids warranty not stock rom .
Do I have a faulty unit?
>>>>Ask a service centre .
If I hard reset , will the result be the same?
>>> unknown try it but it will/ may wipe all data .
jje
Click to expand...
Click to collapse
Related
Service-centre installed firmware I9003DDKp1 (india) - no root/deodex/nothing - absolute stock, absolutely no custom stuff
did the *#272*IMEI thing - CSC shown is INU (im from india)
when i connect the phone to Kies, it shows "your device does not support software upgrading via Kies" as per attached file
any ideas or thoughts to resolve would be appreciated
to which version u wany to upgrade???
vishal24387 said:
to which version u wany to upgrade???
Click to expand...
Click to collapse
i9003DDKP4
pls advise regarding non-Odin solutions
its not ddkp4. Its actually ddkp2. U can upgrade it via odin. Kies update software is most stupid software.
spm123123 said:
"your device does not support software upgrading via Kies"
Click to expand...
Click to collapse
I got the same message some days before the update was avaible in my country. You'll probably be able to upgrade your phone soon, just wait.
loSconosciuto said:
I got the same message some days before the update was avaible in my country. You'll probably be able to upgrade your phone soon, just wait.
Click to expand...
Click to collapse
that cant be it ... the update has already been released and others have already updated
If you know how to flash...just flash DDKP2 using odin twice
I got the same problem. After waiting for months, I reflashed it with odin. So no other way except odin or samsung service center for us.
update through odin ... sammykies the most ever stupid flash program
odin is very easy
Hello!
I just bought my new tablet and I wanted to make sure I have latest version for my device, but I got a message saying that my device has been modified, ok so then I installed kies and it told me I had the latest version avaliable, then I went into download mode and I saw system status:Custom, I tried to wipe both partitions but still the same problem.... I bought this tablet today feels very strange that my system is custom. On my note 3 it is says official
Are you using a MicroSD? If yes, take it out, then reboot and check again. It's a known bug.
Same on mine. No micro sd rebooted many times
Sent from my SM-P905 using Tapatalk
If you rooted you've tripped the knox security sistem and samsung won't update a rooted device. At least that's what Ithink happened on my device...
alexan92 said:
Hello!
I just bought my new tablet and I wanted to make sure I have latest version for my device, but I got a message saying that my device has been modified, ok so then I installed kies and it told me I had the latest version avaliable, then I went into download mode and I saw system status:Custom, I tried to wipe both partitions but still the same problem.... I bought this tablet today feels very strange that my system is custom. On my note 3 it is says official
Click to expand...
Click to collapse
ShadowLea said:
Are you using a MicroSD? If yes, take it out, then reboot and check again. It's a known bug.
Click to expand...
Click to collapse
Hello
I have the same problem. Is custom but Knox is 0x0. I try everything, including Odin, but NO result. In Odin don't start the process, in Kies it shows that is the last firmware, and OTA "the device is modified".
This is a common issue with the SM P905 variant, I had the same problem myself. The only way to sort it out is to send it to Samsung for repairs or take it in to a service centre. I'm pretty sure all they'll be doing is reflashing the firmware but you might not want to void the warranty by doing it yourself.
FreshlyBrewed said:
This is a common issue with the SM P905 variant, I had the same problem myself. The only way to sort it out is to send it to Samsung for repairs or take it in to a service centre. I'm pretty sure all they'll be doing is reflashing the firmware but you might not want to void the warranty by doing it yourself.
Click to expand...
Click to collapse
sorinin said:
Hello
I have the same problem. Is custom but Knox is 0x0. I try everything, including Odin, but NO result. In Odin don't start the process, in Kies it shows that is the last firmware, and OTA "the device is modified".
Click to expand...
Click to collapse
Hello
I solve the problem by using another laptop with WinXP. But please make an IMEI backup. I don't make it, and now my IMEI is /01 and I don't have Phone acces. ..
Now is possible to use my computer (Odin). I make update at last BIOS for my laptop. But still I can not find my IMEI, and in this way can't use the phone...
sorinin said:
Now is possible to use my computer (Odin). I make update at last BIOS for my laptop. But still I can not find my IMEI, and in this way can't use the phone...
Click to expand...
Click to collapse
Wait simply for the update via KIES or OTA. It will be available soon or is still available for a lot of countries.
Status will pass from modified to Official.
check this thread : http://forum.xda-developers.com/showthread.php?t=2710004
Hi,
You first have to check if this particular update (not the stability update BUT this "modified status bug" update is available for your country.
Check it here http://live.samsung-updates.com/inde...device=SM-P905
Have a good Sunday.
Fabien
cracou111 said:
Wait simply for the update via KIES or OTA. It will be available soon or is still available for a lot of countries.
Status will pass from modified to Official.
check this thread : http://forum.xda-developers.com/showthread.php?t=2710004
Hi,
You first have to check if this particular update (not the stability update BUT this "modified status bug" update is available for your country.
Check it here http://live.samsung-updates.com/inde...device=SM-P905
Have a good Sunday.
Fabien
Click to expand...
Click to collapse
No Problem with mine SM-P905
Hi,
I'm very new to play around with the handphone firwmware.
I read a lot of articles and had tried some stock firmwares with Odin .
yet, i found some interest string/characters something like
2.6.35.7-N7000DXKL3-..... [email protected]#2
2.6.35.7-perf-...... [email protected]#1
at Kernal version section of "About phone".
This is my quetions:
1.What is those "[email protected]#1" mean for?
2. Are those genuine stock firmwares ?
3. If not, is it security safe to use? I'm worry about the security issue.
thanx
randomlizard said:
Hi,
I'm very new to play around with the handphone firwmware.
I read a lot of articles and had tried some stock firmwares with Odin .
yet, i found some interest string/characters something like
2.6.35.7-N7000DXKL3-..... [email protected]#2
2.6.35.7-perf-...... [email protected]#1
at Kernal version section of "About phone".
This is my quetions:
1.What is those "[email protected]#1" mean for?
2. Are those genuine stock firmwares ?
3. If not, is it security safe to use? I'm worry about the security issue.
thanx
Click to expand...
Click to collapse
"user"@"computer" (the computer where the kernel / rom has been compiled)
I need the full firmware version to check if its legit.
LS.xD said:
"user"@"computer" (the computer where the kernel / rom has been compiled)
I need the full firmware version to check if its legit.
Click to expand...
Click to collapse
thanks for your reply.
hxxp://samsung-updates.com/device/?id=GT-S5830
Region: XSO
from rapidgator
or visit here and choose rapidgator
hxxp://samsung-updates.com/details/22200/Galaxy_Ace/GT-S5830/XSO/S5830DXKT5.html
May i know how to determine it?
I knew the best way to get the stock firmware is backup from the temporarily update files of KIES .
yet , obviously KIES is not providing firmware update to some of the older model anymore. eg: GT-S5830.
my GT-S5830 came with FROYO, region: MM1 @2011.02 .
I changed the region to:XSO (the only csc KIES can recognize at sg),
it still refuse to update and show a popup warning : 'GT-S5830' does not support initialising.
so, i have to count on Odin .
randomlizard said:
thanks for your reply.
hxxp://samsung-updates.com/device/?id=GT-S5830
Region: XSO
from rapidgator
or visit here and choose rapidgator
hxxp://samsung-updates.com/details/22200/Galaxy_Ace/GT-S5830/XSO/S5830DXKT5.html
May i know how to determine it?
I knew the best way to get the stock firmware is backup from the temporarily update files of KIES .
yet , obviously KIES is not providing firmware update to some of the older model anymore. eg: GT-S5830.
my GT-S5830 came with FROYO, region: MM1 @2011.02 .
I changed the region to:XSO (the only csc KIES can recognize at sg),
it still refuse to update and show a popup warning : 'GT-S5830' does not support initialising.
so, i have to count on Odin .
Click to expand...
Click to collapse
Changing the region may cause malfunction.
Get your firmware from SamMobile.com
thanks . after comparing the hash, very sure the old one is genuine too.
btw, after updating to gingerbread v2.3.6 DXKT5(XSO) .
I found my Samsung GT-S5830 lost the ability to act as Mass Storage in PC/TV/Set-top-box.
although we can get around this problem in pc, by installing the latest samsung usb driver in each pc .
Just wonder if anybody ever solve this problem ?
or, Is it possible to solved this problem, if i revert back to have old firmware: Froyo,DXKC1
I can't try it yet , coz all download links i found on internet is dead.
randomlizard said:
thanks . after comparing the hash, very sure the old one is genuine too.
btw, after updating to gingerbread v2.3.6 DXKT5(XSO) .
I found my Samsung GT-S5830 lost the ability to act as Mass Storage in PC/TV/Set-top-box.
although we can get around this problem in pc, by installing the latest samsung usb driver in each pc .
Just wonder if anybody ever solve this problem ?
or, Is it possible to solved this problem, if i revert back to have old firmware: Froyo,DXKC1
I can't try it yet , coz all download links i found on internet is dead.
Click to expand...
Click to collapse
Any CyanogenMod based custom rom will allow you to mount your sd card as mass storage
Hai .
I went to samsung support and due to issue with my s6 battery they installed with software or firmware in my mobile using odin . But they installed lower version of it not latest. I want to upgrade s6 with latest version so i downloaded
this firmware or software from samfirmware NPL-G920IDVU2DOI2-20150921115810.zip .
I have some question like this :
Will it damage my warranty?
How do completely wipe all my data from odin ? What should i tick ?
Will it brick my mobile?
Will it trip knox?
Thanks
bloggervista said:
Hai .
I went to samsung support and due to issue with my s6 battery they installed with software or firmware in my mobile using odin . But they installed lower version of it not latest. I want to upgrade s6 with latest version so i downloaded
this firmware or software from samfirmware NPL-G920IDVU2DOI2-20150921115810.zip .
I have some question like this :
Will it damage my warranty?
How do completely wipe all my data from odin ? What should i tick ?
Will it brick my mobile?
Will it trip knox?
Thanks
Click to expand...
Click to collapse
It will: Trip Knox, void your Warranty.
It will not: damage your battery, brick your device
Do not wipe data using Odin, known to cause problems, instead do a Factory reset/Wipe cache through recovery before/after flashing the new firmware.
I suggest, do an official OTA update or through Kies, if the new update is already available. If not then it's better you wait for the new update to be available for your device
arneldna said:
It will: Trip Knox, void your Warranty.
It will not: damage your battery, brick your device
Do not wipe data using Odin, known to cause problems, instead do a Factory reset/Wipe cache through recovery before/after flashing the new firmware.
I suggest, do an official OTA update or through Kies, if the new update is already available. If not then it's better you wait for the new update to be available for your device
Click to expand...
Click to collapse
Thanks but the support from samsung rested all my data from odin installed new firmware from odinetc.. It is firmware from my country and i downloaded from samfirmware official samsung update.. Will it still void warranty ?
I am confused badly
arneldna said:
It will: Trip Knox, void your Warranty.
It will not: damage your battery, brick your device
Do not wipe data using Odin, known to cause problems, instead do a Factory reset/Wipe cache through recovery before/after flashing the new firmware.
I suggest, do an official OTA update or through Kies, if the new update is already available. If not then it's better you wait for the new update to be available for your device
Click to expand...
Click to collapse
Also I am using http://samsung-updates.com/details/52909/Galaxy_S6_SM-G920I/SM-G920I/NPL/G920IDVU2DOI2.html this one .. So is it stock rom ? i heard knox will not be tripped using stock rom ? Is it true. Thanks
bloggervista said:
Thanks but the support from samsung rested all my data from odin installed new firmware from odinetc.. It is firmware from my country and i downloaded from samfirmware official samsung update.. Will it still void warranty ?
I am confused badly
Click to expand...
Click to collapse
bloggervista said:
Also I am using http://samsung-updates.com/details/52909/Galaxy_S6_SM-G920I/SM-G920I/NPL/G920IDVU2DOI2.html this one .. So is it stock rom ? i heard knox will not be tripped using stock rom ? Is it true. Thanks
Click to expand...
Click to collapse
I dont know how but the PIT file used by Samsung Service center, does not trip KNOX. The one found on the page you mentioned and on Sammobile although say official but they do trip KNOX. thereby voids your warranty.
Where are you from and What's your build number?
arneldna said:
I dont know how but the PIT file used by Samsung Service center, does not trip KNOX. The one found on the page you mentioned and on Sammobile although say official but they do trip KNOX. thereby voids your warranty.
Where are you from and What's your build number?
Click to expand...
Click to collapse
They said stock rom . and i thought using stock rom didn't viod warranty thanks i didn't know that it void warranty .
I am from nepal and have andriod 5.1.1 .
arneldna said:
I dont know how but the PIT file used by Samsung Service center, does not trip KNOX. The one found on the page you mentioned and on Sammobile although say official but they do trip KNOX. thereby voids your warranty.
Where are you from and What's your build number?
Click to expand...
Click to collapse
Is it not possible to upgrade without using kies its terribly slow and takes 10-15 days . And i cannot use data in my mobile So i downloaded that stock firmware
bloggervista said:
Is it not possible to upgrade without using kies its terribly slow and takes 10-15 days . And i cannot use data in my mobile So i downloaded that stock firmware
Click to expand...
Click to collapse
Try to update using Wifi, or flash it via Odin if you are absolutely fine without warranty!
Tell me your build number like mine is G920IDVU2DOI2
My Fried gave this phone to me (SM-N915G) which is stuck at Powered by Android, and told me to fix it.
He said that when he update to MM from LP without KIES or Odin, the phone suddenly restarted and stuck there getting HOT
He had no experiece to repair it so he asked me to fix it.
So for 3 days lately, i have tried many ways to fix it but wihout any progress, as follow :
1. Flashing Official MM wby using Odin -> still stuck
2. Downgrading Flash Official LP using Odin -> still stuck
3. Installed TWRP, and flasing CFW Micky387_MM_V3.0 for 915F/FY/G (flashing Bootloader and modem as required) -> still stuck with set warranty bit : kernel
4. After Flashing Micky CFW and Failde, i try to flash Emotion Kernel -> still stuck with Kernel is Seandroid Enforcing
5. Redoing Flash Micky CFW with other CSC -> Still Stuck (even i tried with 915F and 915FY as in the aroma installer)
6. Never failed during flash procedure with Odin or TWRP, everything is smooth
7. When stuck, the device is getting Hot slowly but and when left as long as 15 minutes, the HH is getting HOT (TWRP read 72 degree at most)
**Update
8. Tried using Official SmartSwitch sucessfully but the result is still the same -> Still Stuck and getting hot as usual T.T
Last Download Mode status is :
Odin Mode (High Speed)
Product name: SM-N915G
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox warranty void: 0x1 (2)
Quallcomm secureboot : Enable (CSB)
RP SWREV: S1, T1, R1, A1, P1
Secure Download: Enable
UDC START
I am now thinking, should i flash another Kernel or PIT or Bootloader? but i still cant decide what to do next to revive this Phone
Please help, any suggestion is greatly appreciated, thank you.
Please give some help, thank you.
Help Please anyone?
This is Hard Brick or Soft Brick?
Any suggestion or Opinion please
Thank you
wingz17 said:
Help Please anyone?
This is Hard Brick or Soft Brick?
Any suggestion or Opinion please
Thank you
Click to expand...
Click to collapse
Have you tried a reinstall using KIES?
The Radius Kid said:
Have you tried a reinstall using KIES?
Click to expand...
Click to collapse
Yes i have try to recover but not using KIES, but using smartswitch...
Is it diffrent by using KIES or SmartSwitch?
Thank you.
wingz17 said:
Yes i have try to recover but not using KIES, but using smartswitch...
Is it diffrent by using KIES or SmartSwitch?
Thank you.
Click to expand...
Click to collapse
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.
The Radius Kid said:
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.
Click to expand...
Click to collapse
Thank you for the suggestion,
I will try that one out and let you know.
wingz17 said:
Thank you for the suggestion,
I will try that one out and let you know.
Click to expand...
Click to collapse
The Radius Kid said:
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.
Click to expand...
Click to collapse
Sorry For the long response, i have tried flasing using KIES but still stuck on the android, and no progress.
Right now i am run out of option, please help, thank you.
wingz17 said:
Sorry For the long response, i have tried flasing using KIES but still stuck on the android, and no progress.
Right now i am run out of option, please help, thank you.
Click to expand...
Click to collapse
I'm going to guess that you've tried installing MM using Kies directly from Sammobile?
If so,have you tried turning off your computer's antivirus when you download/install?
It sounds like the bootloader is looking for something and can't find it.....kind of like what happened to me when I totally ripped KNOX out of my phone.
Restore time!
Good thing I did CWM backups.
In your case,your computer's anti virus could be seeing something in the download and ripping it out.
I've seen my browsers do that when I download stuff....pain in the....
Have you tried a different battery?
Maybe a search of the forums to see if anyone else has had this problem and solved it?
I kind of remember seeing something like this a while back.
The Radius Kid said:
I'm going to guess that you've tried installing MM using Kies directly from Sammobile?
If so,have you tried turning off your computer's antivirus when you download/install?
It sounds like the bootloader is looking for something and can't find it.....kind of like what happened to me when I totally ripped KNOX out of my phone.
Restore time!
Good thing I did CWM backups.
In your case,your computer's anti virus could be seeing something in the download and ripping it out.
I've seen my browsers do that when I download stuff....pain in the....
Have you tried a different battery?
Maybe a search of the forums to see if anyone else has had this problem and solved it?
I kind of remember seeing something like this a while back.
Click to expand...
Click to collapse
Thank you for the response,
I was using KIES 2.64 that downloaded from Samsung website to fix the phone as your suggestion (tools->firmware upgrade and initialisation) but still fail to fix it.
Nope, the antivirus still active when KIES download the FW and Flash it into the phone, but it is new to me that antivirus will intercept ongoing dowloaded files, if so i think the antivirus will give some notification or warning about the content of the file that being downloaded and in my case, my antivirus is still cool and no notification whatsoever.
The bad thing is i do not have any cwm backup and since this is my friend phone and not mine, well... we dont have any backup for this phone.
Regarding the battery, i admit that i havent try other battery, since i dont see any connecton between it, in my opinion, the phone works well, the charging animation working, and no sign of weak battery... but i will try to do it if i can get some other battery
I have surfed many forums and websites, but almost 90% can be fixed with simple flashing from odin or just by clearing up cache and data from recovery.
Other that that, wither, no one respond to the problem, or just some discussion without conclusion, really frustrating.
I even go further to read about android booting sequence to identify whats wrong with the boot sequence, but still confused...
But i have some question if you would to answer :
1 . Stuck at Android logo, bootloader or kernel problem?
2 . Is it possible that one of the mainboard chip that have some part in booting process is malfunctioning? But if so, the phone will be dead bricked right?
3. How about the booting process is halted due some hardware failure? ex : some chip (other than chip that have part in booting process) is bad and so the bootloader init is halted
4. The Worst guess, is it possible that the phone is fake? (the serial number behind the baterry is accepted by kies though)
Thank you very much, you are the only one who still response to my problem. :good:
As it seems you use the wrong Bootlaoder. Is his phone N915P or N915G? When you flash N915G Bootloader to N915P, it will not boot but the bootloader will work correctly. Try to flash the N915P bootloader.
I have N915FY phone but did not know first if I had N915F or FY. I flashed the N915F bootloader version, which flashed successfully, but was not booting. Bootloader said that my phones model is N915F. After flashing the FY Bootloader version, it successfully booted to system.
Bordo_Bereli51 said:
As it seems you use the wrong Bootlaoder. Is his phone N915P or N915G? When you flash N915G Bootloader to N915P, it will not boot but the bootloader will work correctly. Try to flash the N915P bootloader.
I have N915FY phone but did not know first if I had N915F or FY. I flashed the N915F bootloader version, which flashed successfully, but was not booting. Bootloader said that my phones model is N915F. After flashing the FY Bootloader version, it successfully booted to system.
Click to expand...
Click to collapse
Thank you for the Response,
First, his phone is N915G (according to the box and the information in the battery compartment)
(Really sorry for the mistake i made at the thread title)
And regarding bootloader, that is also my concern at first, i think maybe i was flasing wrong region and bootloader, and so i search the way to find out the real version of the phone, but after trying many ways described on the net (by imei or serial number) , i still cannot found out the way.
But one instance when i try using KIES, and KIES asked for the version and serial number when device upgrade and initialisation, i entered the exact version and serial number that is found behind the phone in battery compartment. KIES immediately confirms that the version and serial number is valid, (i still wonder though, is KIES check it online at Samsung server or there are some serial number database embedded in the KIES) and continue to run trough the official fw download and installation by KIES but at the end still no success.
Is it possible that the version and serial number is wrong ? if so, how to determine the correct one?
and is it safe to try flasing another bootloader?
Thank you very much
Hello, there is no bootloader related to serial number or something. There are different bootloaders for different models and android version. When you flash MM-Version, you need to be sure that you use the right bootloader and baseband files for MM. If you flash different region-locked firmware/bootloader, it will not affect btw. not solve the boot-stuck problem.
http://samsung-updates.com/device/?id=SM-N915G Try to flash 6.0.1 firmware that is related to your region if you still want to try to flash different region-firmware.
Maybe download the XSA 6.0.1 Firmware with the pit file XSA http://gsm-firmware.com/index.php?a=browse&b=file-info&id=15892.
Then flash XSA 6.0.1 and TBLTE_SEA_XSA.pit together in odin. Under Odin 3 V3.12 ticke the re-partition at option-tab and select TBLTE_SEA_XSA.pit under pit-tab.
Bordo_Bereli51 said:
Hello, there is no bootloader related to serial number or something. There are different bootloaders for different models and android version. When you flash MM-Version, you need to be sure that you use the right bootloader and baseband files for MM. If you flash different region-locked firmware/bootloader, it will not affect btw. not solve the boot-stuck problem.
http://samsung-updates.com/device/?id=SM-N915G Try to flash 6.0.1 firmware that is related to your region if you still want to try to flash different region-firmware.
Maybe download the XSA 6.0.1 Firmware with the pit file XSA http://gsm-firmware.com/index.php?a=browse&b=file-info&id=15892.
Then flash XSA 6.0.1 and TBLTE_SEA_XSA.pit together in odin. Under Odin 3 V3.12 ticke the re-partition at option-tab and select TBLTE_SEA_XSA.pit under pit-tab.
Click to expand...
Click to collapse
Thanks for the reply!
Although there is no bootloader related to serial number, but if we put the serial number in KIES, it will identify what CSC and region, which can be use as a guide to choose the correct FW or let KIES do the Flashing according to the inputted serial number, and as long as the serial number is correct one, that is my opinion but please CMIIW.
When flashing MM, if i use the MM that has been downloaded, the bootloader and baseband is included in the MM image right? or shouuld i flash it separately?
i have tried your suggestion but with no sucess, i have dowloaded the PIT and the FW, flash it trough odin which was sucess, but still stuck.
I do not tick auto restart at Odin, so i manually restart the phone, but i encounter an event which at 20% installing system update (below the greed droid guy) the progress bar is vanished and replaced with erasing, and after that the phone stuck again at the same spot.
Do you have any idea why?
Thank you very much.
Just thinking, should i erase the NAND in ODIN?
If so, how to restore it?
I think that if i backup the NAND using custom recovery and restore it later, it just bring back the same problem, if the NAND causing all this.
Do anyone have some NAND backup that i could use? or any other suggestion?
Thank you
Can you boot to recovery? if yes, try to wipe data and cache.
If it still not working, try to backup your efs with a custom recovery (ex. TWRP), or better the entire System like data, system, boot, efs, modem and save it to your computer.
After saving the backup, try to flash the firmware with pit file while checked NAND erase all.
When its finished and your device boots up, you can flash back your custom recovery and recover only the efs-partition.
If its not working, then there is maybe problems with your eMMC. But be aware using nand erase all. It is the last riskfully option left after trying several things.
I have a backup of my resurrection rom. If you want it I can upload it.