I owned a Samsung note 10.1.
I flashed a lot of custom roms, and now I come back to original ROM 4.1.2 (flashed via Odin) from sammobile.
The weird problem is I cannot open Paper Artist, I can open it for the first time after finished flashing Rom via Odin, but after 5 or 10 minutes, I open Paper Artist again, I cannot open it any more, it get freeze at the loading screen for a while, then minimize.
Does anyone get this problem?
Related
I flashed Bionix-v on my phone the other day, it is a vibrant rom, and I flashed it on my i9000M without knowing this. I liked bionix, but I wanted my old configuration instead, so I restored from my back up with Nandroid. It would work fine until I plug it into either a computer or an outlet, it would immediately power off and have a battery that appears for a split second, then a loading circle, preventing me from connecting to the computer to transfer any type of file. It would continue this cycle until I powered my phone back on again which would say "Vibrant" (I'm using the GT-i9000) then my usual Galaxy S logo. It resumed working.
I decided that I needed a NORMAL charging process so I followed the guides and used Odin to flash my phone back to stock firmware. Odin told me everything succeeded and a giant "PASS" was lit up in green at the top of the window. However my phone no longer had a battery flashing, it was instead just a loading circle that would flash without stop. I unplugged my phone, and was greeted by a "Galaxy S" logo that would flash instead. I have also tried Heimdall by following TubeShaped's : http://forum.xda-developers.com/showpost.php?p=11257871&postcount=154
And tried to flash a custom rom directly from Odin: http://forum.xda-developers.com/showthread.php?t=940671
None of these methods have worked. If any of you have any idea of whats going on, I'd appreciate the help. My hunch is that by loading a custom Vibrant rom onto a GT-i9000, something went amiss, but have no idea what it could be.
Ok so I have tried on another thread that kind of went dry mainly cause I was MIA....but now I am back and have done some more reading up and think it is safe to say rooting and trying customer ROM's is not for me...lol I pretty much messed up a new Galaxy Tab 2 7' brand new only after a few weeks trying to root it. I had another thread link below:
http://forum.xda-developers.com/showthread.php?t=1834368&page=2
But I did not get anything to work right. At this point I am really just looking to get the tablet working. I don't really care what firmware rooted or unrooted...i just want to be able to use it....do some more research and and maybe join the rooting community again when I get a Galaxy S3.
I'd appreciate any help. I am pretty stuck right now!
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
bark777 said:
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
Click to expand...
Click to collapse
Worked like a charm....you made it simple! Thanks!
Continous boot loop on tab 2 p3113
My problems are kind of different from all the others I have read. Yes it is similar that it boot loops. But mine freezes at different areas in boot mode. This is driving me crazy and I am spending way too much time and effort trying to fix it. Hopefully you can help.
I don't really know for sure if the android os was 4.1.1 or 4.1.2 or some other rom but it did state in download mode that it was original and not custom rom.
I received this tab from ebay and it is new never used, but somehow whoever had it probably tried to flash it and now I received it with a continuous loop. They stated that it stuck in SAMSUNG logo. I found it true but it also stuck other places as well. I did do a reset first before I attempted to flash it.
I did the Odin flashing.I found the 4.2.2 xar file HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 and did according to instructions. But that didn't work. It did boot into android but it didn't stay there very long and rebooted itself. I couldn't stay more than 20-30 seconds and it would reboot itself or freeze at various places in android. I also hard reset it. Still same thing. It would also freeze on the first samsung logo tab 2 screen and also at the blue circle with samsung logo. It was different every time. I would have to hold down the on button until it rebooted. It also stalls or freezes during Android upgrading... Optimizing app at various number stages sometimes it goes thru that and then to the next phase of installing apps then it freezes again. I cannot get it to work if I try to upgrade via wireless upgrade to samsung. it will freeze even before it downloads the upgrade file.
I then flashed back to the original xar file P3113UECLK7_P3113XACCLK7_XAC which is 4.1.1 That worked a little better, but it freezes and also the sound chatters when it freezes on bootup you know, when the samsung sound comes on then the blue circle.
Finally I tried to recover or flash from the recovery mode using the upgrade from a sdcard. using the original 4.1.1 xar file. It hewlped a little but still doing the continuous boot loop at different stages but it gets to the Android is upgrading... more often. It freezes always now.
So I don't know what else to do. You mentioned a CMOC10-Kernel to load, how does one go about doing that and what are the steps.
Thanks in return if you can suggest things.
Wayne
Hi Guys,
Succesfully rooted and ROMed etc SGS & SGS2 many times before.
Yesterday rooted my Note 2 n7100 and Note 10.1 n8010 using CF Root. Both UK models with latest stock 4.2.1s
The Note 2 went fine....done in 10 seconds, rebooted and worked.
The n8010 succeeded in Odin, bootloaded fine (as in Samsung logo) then went into scrambled screen for a few seconds then black.
Tried restarting several times, gave up, left it and it rebooted 10 minutes later with no root.
Question is: What should I have expected? I'd expect the same rooting scenario with the Note n8010 as with the n7100 - 10 seconds in Odin-> auto Reboot -> Done. But I ended up thinking I'd bricked my n8010 for 10 minutes.
The .tar was fresh from CF's site.
TIA,
Sullivan
stateit said:
Hi Guys,
Succesfully rooted and ROMed etc SGS & SGS2 many times before.
Yesterday rooted my Note 2 n7100 and Note 10.1 n8010 using CF Root. Both UK models with latest stock 4.2.1s
The Note 2 went fine....done in 10 seconds, rebooted and worked.
The n8010 succeeded in Odin, bootloaded fine (as in Samsung logo) then went into scrambled screen for a few seconds then black.
Tried restarting several times, gave up, left it and it rebooted 10 minutes later with no root.
Question is: What should I have expected? I'd expect the same rooting scenario with the Note n8010 as with the n7100 - 10 seconds in Odin-> auto Reboot -> Done. But I ended up thinking I'd bricked my n8010 for 10 minutes.
The .tar was fresh from CF's site.
TIA,
Sullivan
Click to expand...
Click to collapse
maybe you chose the wrong file ... mine just got rooted in less than a minute ... what did you exactly do??
Scorpion_Ibm said:
maybe you chose the wrong file ... mine just got rooted in less than a minute ... what did you exactly do??
Click to expand...
Click to collapse
Hi Scorpion,
I downloaded from CF's site the 'CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010.tar.md5' file in the Odin with .tar package for the n8010.
I nearly crapped myself when it rebooted into a scrambled screen (after Samsung logo) then went black.
Before I repeat the experience 'd like to know if this is a very rare occurence / sometimes happens / happens quite a bit...
The 'CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010.tar.md5' file measures 17,571,925 bytes on my Win PC.
I've used Odin on and off for about 4 years and this is the first time something like this has happened to me...
[edit] Oh, I'm coming from stock XXUMC5 build of 4.1.2 [/edit]
stateit said:
Hi Scorpion,
I downloaded from CF's site the 'CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010.tar.md5' file in the Odin with .tar package for the n8010.
I nearly crapped myself when it rebooted into a scrambled screen (after Samsung logo) then went black.
Before I repeat the experience 'd like to know if this is a very rare occurence / sometimes happens / happens quite a bit...
The 'CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010.tar.md5' file measures 17,571,925 bytes on my Win PC.
I've used Odin on and off for about 4 years and this is the first time something like this has happened to me...
[edit] Oh, I'm coming from stock XXUMC5 build of 4.1.2 [/edit]
Click to expand...
Click to collapse
I dont know what really happened ... the Note 10.1 is my one and only android device and i tried CF auto root one time
and succeeded ... but mybe something rare happened ....on the site it's written
For the root to work, the device must reboot into recovery. Most devices will do this automatically after flashing
these files, but in case that does not happen, please boot into recovery manually.
Maybe thats what went wrong!!
And maybe try the included ODIN (what i did) if there is any modifications :S
OK... I did use the included Odin...
I've just tried a normal reboot to recovery (vol up + power), not having done any flashing etc, and I got the scrambled screen and it reboots three minutes later having done a factory reset!
Back to square one again!
A screen taking me straight through to initial reset again!
ANNOYED! (not at you scorpion - just at this weirdness)
Just attempted a fresh reroot using newly downloaded .tar.md5 on the freshly factory reset n8010, using the supplied Odin (v1.85) and had exactly the same scenario happen again.
Doesn't look like I'll be getting root this way?
Anyone any idaes??????
*** SOLVED ***
Works with Odin 3.07 as opposed to Odin 1.85 (with .ini settings as supplied by CF in .zip file)
SO....
With my Note 10.1 (4.1.2 ***XXUCMA5 , UK model) the root don't work with CF's supplied .zip package.
I'm now a HAPPY BOY again.
Thanks for pitching in Scorpion.
Hi all,
Firstly I apologise for actually posting as I've spent a week trying to not be a twat and to fix it myself but alas I'm at the end of my tether.
OK I have a Tab 2 10.1 P5100 (thus with sim). I originally got it about 3 years ago in Poland and their OTAs are about as frequent as, well, they never happened. So, over the years whilst working there I flashed via Odin various official updates to get it up to scratch. Last one being Jelly Bean.
Everything has been fine until a week ago when suddenly it would boot, get to the log in screen, let me enter my pin, work for 10 seconds and then suddenly reboot. It's an endless loop but it's not stuck on booting up it just crashes ONCE started up fully.
It won't connect to Kies. Now, this is probably the rubbish cable (This is the third official cable in 3 years I've goe thru). The system restore option from manual booting does nothing and wipes nothing so I've been trying to just load an official ROM from the SD..that does nothing.
It starts to install and then goes back to the "no command" screen.
Can I simply download something onto the SD and install from there? the zip files I keep trying dont work.
Any advice is appreciated!
Hello,
I have a Galaxy Trend Plus and I'm having a few problems with this phone. Some months ago I flashed the stock ROM through Odin because the device didn't work. After that, it worked. But now for some reason every time it boots after roughly 1 minute it sets brightness to max, fills the screen with interferences and reboots. It repeats this again and again.
It rejects stock firmware update through Odin, even if the process is successfully completed.
It rejects recovery update to TW or CWM through Odin.
It rejects NAND erase thorugh Odin.
If I try to wipe data through the stock recovery it completes the process but then nothing changes.
To sum it up it rejects everything I do to it and keeps rebooting forever.
What kind of problem is this? What can I do? I have thought about flashing the single files for the tabs "BL", "AP", "CP" and "CSC" but I don't have them.
Please help.
EDIT: I made a typo in the title, It is GT-S7580.