Hi.
I installed the MX Player Pro onto my Xoom Wifi which running Jellybean 4.21 (EOS 4). Everytime when I play the movie it will close by itself after 5-10 seconds.Is there anyone got the same problem??? Or what player should I use with EOS 4??
Thanks.:angel::angel:
Yeah got that a long time ago, just open a video that can be played and change the decoder (H/W to S/W for example), and then try the video in question.
Or just go to settings and change the decoder to S/W
Related
Hi
After upgrading htx m8 to 4.4.4 custom rom, when i tried to watch a movie , after a few seconds mx player juat closes.
it happens with all decodersand with streaming and local media.
Hope this helps make mx player even better
Shai
Before the developer here looks, did you also ask over at your custom rom's support? It's possible that they broke something as well.
Also, what rom is this?
Hi
Its maximushd 8.1.0
Didnt check in the roms forum, will do.
Sent from my HTC One_M8 using XDA Free mobile app
shaiamiel said:
Hi
After upgrading htx m8 to 4.4.4 custom rom, when i tried to watch a movie , after a few seconds mx player juat closes.
it happens with all decodersand with streaming and local media.
Hope this helps make mx player even better
Shai
Click to expand...
Click to collapse
It looks like you have played in H/W+ decoder.
Improper codec configuration may lead to crash.
Can you try the video in H/W or S/W mode?
If it crashes in all decoders, first install mx log collector. Now run the mx player & let it crash. Open the log collector immediately after crash.
Your current log doesn't contain any errors except audio decoding failed in H/W+ mode.
Hi, i'm getting crashes with mx player pro, while the default player plays the file ok.
Here's the dump. It occurs after one second (i have time to see a picture).
Most of the files play ok, i seem to have an issue with some formats.
The integrated player says video/x-matroska
1280x720
471 Mo
5.1 ch
reader is a galaxy note2, up to date.
deafknight said:
Hi, i'm getting crashes with mx player pro, while the default player plays the file ok.
Here's the dump. It occurs after one second (i have time to see a picture).
Most of the files play ok, i seem to have an issue with some formats.
The integrated player says video/x-matroska
1280x720
471 Mo
5.1 ch
reader is a galaxy note2, up to date.
Click to expand...
Click to collapse
Looks like you are playing in H/W+ decoder. H/W+ decoder may not be compatible with your devuce.
Try the video in H/W decoder.
It should work since you can play the same video in stock player.
The tittle says it all. I flashed my sgy with CyanogenMod 11 (kitkat 4.4.4) yesterday. Then, I install MX Player and its codec (Armv6 VFP-for sgy). MX Player is my default media player when I use stock rom and I love it for its performance and functions to play unsupported video file format that internal player cant play. I noticed that CM 11 have problem with something about OMX Codecs (if im right, cant remember, found about it when googling the problem yesterday, but no solution). I tried to play some music videos (mp4 format) with internal player. Yeah, same as stock problem. Can play MPEG-4 but Xvid cant. But this time I cant play x264 mp4 format that previous stock does. Its terribly lag so much. The audio ok. But dont worry though coz I can use MX Player to play that file. Then, i get the same problem, lags. I tried everything, reflash with stock and flash it back with CM 11 rom, use default and custom codec. Still didnt solve the problem. I even tried uninstall the app and reinstall it without the codec. Suprisingly, I can use the app without codec. MX Player didnt ask to install its codec like before when no codecs found. It looks like MX Player use internal decoder as its codec. What the... I even reinstall its codec but it seems like MX Player ignores it. So frustated. Then, im trying to google for any other app that can play various type of video. I found QQPlayer. I wanna give it a try. After install it, still cant play the video. Same problem. But when I look in setting, I found something that the player able to switch between internal decoder and its own decoder. Then, trying to play the video... bla, bla, bla.... and it works. But with a little lag. Not terrible as before. The video and sound is out of sync. Yeah, the same problem when I use QQ Player with stock before using the MX Player. Okay, the real question is, is there any 'switch' for MX Player to choose between its decoder or internal decoder as its codec. I believe that everyone have across the same problem when using CM 11 on sgy. This just QQ Player without any additional codec can play the video with little lag. If MX Player? The problem will solve without any lag and smooth. (maybe, when use its own codec)
P.S. sorry if my english are bad. If any of you didnt understand the question, i can give a bit more detail. Im malaysian and still 15 years old
CM 11 link: ht-tp:-//down-load-.-android-armv6-.-org/_builds-/-totoro/ (remove any dash - ) (dash only!) *still new member, cant post real outside links. sorry if I break the rules*
KazuShi998 said:
The tittle says it all. I flashed my sgy with CyanogenMod 11 (kitkat 4.4.4) yesterday. Then, I install MX Player and its codec (Armv6 VFP-for sgy). MX Player is my default media player when I use stock rom and I love it for its performance and functions to play unsupported video file format that internal player cant play. I noticed that CM 11 have problem with something about OMX Codecs (if im right, cant remember, found about it when googling the problem yesterday, but no solution). I tried to play some music videos (mp4 format) with internal player. Yeah, same as stock problem. Can play MPEG-4 but Xvid cant. But this time I cant play x264 mp4 format that previous stock does. Its terribly lag so much. The audio ok. But dont worry though coz I can use MX Player to play that file. Then, i get the same problem, lags. I tried everything, reflash with stock and flash it back with CM 11 rom, use default and custom codec. Still didnt solve the problem. I even tried uninstall the app and reinstall it without the codec. Suprisingly, I can use the app without codec. MX Player didnt ask to install its codec like before when no codecs found. It looks like MX Player use internal decoder as its codec. What the... I even reinstall its codec but it seems like MX Player ignores it. So frustated. Then, im trying to google for any other app that can play various type of video. I found QQPlayer. I wanna give it a try. After install it, still cant play the video. Same problem. But when I look in setting, I found something that the player able to switch between internal decoder and its own decoder. Then, trying to play the video... bla, bla, bla.... and it works. But with a little lag. Not terrible as before. The video and sound is out of sync. Yeah, the same problem when I use QQ Player with stock before using the MX Player. Okay, the real question is, is there any 'switch' for MX Player to choose between its decoder or internal decoder as its codec. I believe that everyone have across the same problem when using CM 11 on sgy. This just QQ Player without any additional codec can play the video with little lag. If MX Player? The problem will solve without any lag and smooth. (maybe, when use its own codec)
P.S. sorry if my english are bad. If any of you didnt understand the question, i can give a bit more detail. Im malaysian and still 15 years old
CM 11 link: ht-tp:-//down-load-.-android-armv6-.-org/_builds-/-totoro/ (remove any dash - ) (dash only!) *still new member, cant post real outside links. sorry if I break the rules*
Click to expand...
Click to collapse
Both H/W & H/W decoders use your system's inbuuld codecs. So, any issue in codec configuration will lead to issue.
S/W decoder needs powerful CPU. So, it will be obviously lag in your device.
FYI,
AndroidArm6 is community made Project.
They use their self developed libraries since the source codes are not provided by Qualcomm. So, don't expect that it will perform like stock.
now i get it. so, there is no use if there is a 'switch' or not, still the same right? yeah, well, at least i know that. thxx... i decided want to use stock rom now, maybe with some kitkat themes...
Hello,
Since I have upgraded to Cyanogen OS 12S - or CM12S, as you prefer - MX Player is not able to play movies with H/W+ decoding.
I also noticed a bigger drain in battery over time with this combination (only H/W and CM12S).
Does anyone knows why is this happening?
Does anyone know how to fix it?
I also noticed that, with this update, playback of H.265 is much smoother now.
Thank you in advance.
I have the same issue
Does anyone have an answer for this? It use to work fine in CM11S
Same issue, but worse.
Got the same issue. But now HW stopped working as well. (Including recorded video playback from gallery). Only MX player SW works.
Don't know if it's related to xposed. Planning to do a system upgrade again and check.
SRChiP said:
Got the same issue. But now HW stopped working as well. (Including recorded video playback from gallery). Only MX player SW works.
Don't know if it's related to xposed. Planning to do a system upgrade again and check.
Click to expand...
Click to collapse
I updated and checked, it still didn't work. But HW worked after I disabled developer tools and enabled it back. However, HW+ is still not working.
I could only get S/W working in CM12S.
I'm running CM12.1 nightly now and H/W works, but still no H/W+
I have same problem mx player will not play many vids it used to play easily online especially 3gp and i have the backup players for mx player also they dont help just does loading and wont play all decoders dont work. would somebody please tell me what to do or mx player please fix the decoder issues
From what I read, the problem is not with MX Player, but with Android Media Library in COS12 - some changes that are incompatible with MX so we have to wait if it's fixed in COS12.1.
Hello I've been having one really annoying issue with my beloved MX player which I love which is that the HW+ decoder either tells me it won't play videos I have through Plex app I have stored on computer or that it switches from HW+ to SW and SW doesn't play the videos properly they lag or play out of sync or the app crashes.
Now I know these videos where HW+ fails to work actually has played in the past though I would say that I recently flashed stock sony rom then using CWM flashed a custom rom but I did all this to try get HW+ to play my plex videos where it wouldn't either switch to SW or not play at all when the videos have played fine in the past.
I use MX player 1.7.40 (ARMv7 Neon)
Custom Codec 1.7.32 for AC3 Audio support
Phoenix Final Custom Rom for Xperia P using Nemeis Kernal 6.3
I understand that you guys need the logcat information and I read the thread about how do do that but I ran into a problem that when I downloaded the logcat app for mx player it returns an error "Cannot access the system log"
RyuBlade said:
Hello I've been having one really annoying issue with my beloved MX player which I love which is that the HW+ decoder either tells me it won't play videos I have through Plex app I have stored on computer or that it switches from HW+ to SW and SW doesn't play the videos properly they lag or play out of sync or the app crashes.
Now I know these videos where HW+ fails to work actually has played in the past though I would say that I recently flashed stock sony rom then using CWM flashed a custom rom but I did all this to try get HW+ to play my plex videos where it wouldn't either switch to SW or not play at all when the videos have played fine in the past.
I use MX player 1.7.40 (ARMv7 Neon)
Custom Codec 1.7.32 for AC3 Audio support
Phoenix Final Custom Rom for Xperia P using Nemeis Kernal 6.3
I understand that you guys need the logcat information and I read the thread about how do do that but I ran into a problem that when I downloaded the logcat app for mx player it returns an error "Cannot access the system log"
Click to expand...
Click to collapse
If you are using custom rom, they might have modified the Android Media Framework. It will break the MX Player's HW+. If it's not working Just turn it off & use HW instead.
MX Player 1.8 final is expected to get alternative HW+ engine that may work in most of the devices. Kindly be patient till that
Sent from my SM-G900H using Tapatalk