Database Info

[Q] stuck on odin set up conection I am brick

hi there
After flashing a stock room I got a boot bucle, so i did reset data factory, cache partition and dalvich cache, restart and still had a boot bucle, so I enter in dowload mode again started odin and reflashed stok room 2.3.4 again; in the midle of the process i got an odin FAIL on red square !!!! after that fit doesnt even start, is dead.
I am still able to enter "dowload mode" by holding all three bottons (volume up/down. home and power) but when i tray to flash someting odin get stuck on <1> setup conection .....
any idea what i can do??

Try rebooting the PC and changing the USB port!...Hope it works!
galaxy fit + CM7.2 (2.3.7) + 801Mhz

neil.richard said:
Try rebooting the PC and changing the USB port!...Hope it works!
galaxy fit + CM7.2 (2.3.7) + 801Mhz
Click to expand...
Click to collapse
I have been restared many times and tryed every single usb port and doest work, but thanks for anwser
any body else, any idea ??

Try it from another pc, if possible. Might be internal hub problem of pc. At least you could exclude this after it.
Sent from my GT-S5570 using XDA App

Rodsengard said:
Try it from another pc, if possible. Might be internal hub problem of pc. At least you could exclude this after it.
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
i al ready try on 3 diferent pc`s and every port on them and still the same. any advice is welcome

Okay, you may try flashing creed's 1.3 using odin and then flash v1.5 over it...
Creed' s rom is any day better than the stock rom...
And if you want the stock rom only, you could redownload all your files...maybe that will help...

mefrodo said:
I have been restared many times and tryed every single usb port and doest work, but thanks for anwser
any body else, any idea ??
Click to expand...
Click to collapse
Can u go in Recovery mode?...if yes then u can either flash Creed's ROM or CM7!...
galaxy fit + CM7.2 (2.3.7) + 801Mhz

neil.richard said:
Can u go in Recovery mode?...if yes then u can either flash Creed's ROM or CM7!...
galaxy fit + CM7.2 (2.3.7) + 801Mhz
Click to expand...
Click to collapse
Odin does recognize the phone but, when i try ti flash any room it gets stuck on "set up conection..." after 45 minutes still same status.
help please!!!!

mefrodo said:
Odin does recognize the phone but, when i try ti flash any room it gets stuck on "set up conection..." after 45 minutes still same status.
help please!!!!
Click to expand...
Click to collapse
Okay, now some basic stuff...
Do you have a galaxy fit s5670??
And are you trying to flash galaxy fit's software only na???
And have tried taking out the battery, putting it back and restarting your phone??
also, while your phone is switched off, and you try to charge it, does the big battery icon come up???

a.cid said:
Okay, now some basic stuff...
Do you have a galaxy fit s5670??
And are you trying to flash galaxy fit's software only na???
And have tried taking out the battery, putting it back and restarting your phone??
also, while your phone is switched off, and you try to charge it, does the big battery icon come up???
Click to expand...
Click to collapse
thanks for for you answer
I have S5670
I am tryng to flash a stock room for s5670
I got nothing on screen, not even pulged
only way that odin recognize the phone is by holding volume up/down home and power, when press start button on odin it get stuck on firs step: "set up conection ... " and nothings happen after that
any idea is welcome ill try everyting

mefrodo said:
thanks for for you answer
I have S5670
I am tryng to flash a stock room for s5670
I got nothing on screen, not even pulged
only way that odin recognize the phone is by holding volume up/down home and power, when press start button on odin it get stuck on firs step: "set up conection ... " and nothings happen after that
any idea is welcome ill try everyting
Click to expand...
Click to collapse
The fact that odin recognizes your phone means that it isn't a hard brick..
If all else fails, try asking samsung for a replacement..
Say you left the phone to charge overnight and now it rrefuses to switch on...however, this should be your last resort...
Before that, can you list in detail, all the steps you did...like which odin, which ops etc...
And was your device able to connect to ur pc before you tried this, as in all drivers were present??
Also, maybe you can try flashing cwm from this:
http://forum.xda-developers.com/showthread.php?t=1352518

a.cid said:
The fact that odin recognizes your phone means that it isn't a hard brick..
If all else fails, try asking samsung for a replacement..
Say you left the phone to charge overnight and now it rrefuses to switch on...however, this should be your last resort...
Before that, can you list in detail, all the steps you did...like which odin, which ops etc...
And was your device able to connect to ur pc before you tried this, as in all drivers were present??
Also, maybe you can try flashing cwm from this:
http://forum.xda-developers.com/showthread.php?t=1352518
Click to expand...
Click to collapse
thanks for your answer, I will be writing all details at night due to I am working rigth now, also I`ll check the link a soon as I can. thanks in advance.

If the conection problem is... Before u usw odin plz make sure that u have instal lates kies on your pc/laptop...have u made it...and than if u usw windows xp plz make sure went u instal kies there are dotnet fix v 3.5 or 4 on your pc....usually kies will download it for u.....when u install it
I've try to flash frm my pc that use windows xp sp2 and doesnt have internet conection and i use kies from the cd boxlet it doesnt work... I think ww have the same problem... May it help u......
Sent from my GT-S5670 using xda premium

And a big sorry for my terible english....... (●*∩_∩*●)
i think your problem is :
1: you do t have the latest dotnet fix......
2. your kies is not ip to date or u even doesn't install it....
3. or your antivirus block the acces.so plz stop all of your antivirus begore flasing use odin...
4. u have usb problem..plz search on it..im not master about it... im just a new kid on the block lol (︶︿︶)
the thing that should u do....
1. check your version of wi diws and dotnet fix.
2. stop all of your antivirus....
3. try reinstal kies first and update it....than run your odin....
Sent from my GT-S5670 using xda premium

I have the same problem... I've tried everything... I don't know what else to do (

reizen said:
I have the same problem... I've tried everything... I don't know what else to do (
Click to expand...
Click to collapse
Im not master bout it.but before trying can u write here soec of your pc....
Sent from my GT-S5670 using xda premium

sorry .... can be more explicit ... I do not know very well English

Haha lol sorry there somany eror on what i've type
Sent from my GT-S5670 using xda premium

reizen said:
sorry .... can be more explicit ... I do not know very well English
Click to expand...
Click to collapse
Can you share your pc spec here.... Cause i think the problem is not on the odin but your pc software..
Sent from my GT-S5670 using xda premium

problem solved... thanks for help!
... was due to the USB port, I did not have USB 2.0 port

[Q] My dead tab

Hey xda i have samsung tab p6200 and it is being dead..when i connect it to a charger it shows a bttery with triangle..and i can go into download mode but not recovery mode..and i m trying to flash with odin but dont know really how to flash..it freezes at setup connection and i relly dont know how to seleect files for pda bootloader etc..please sumone help me with it..can my tab be fixed to normal?? ..i wan to install indian firmware.plzzz reply..

As long as you can boot into download mode, your tab isn't dead. Now, make sure you have a copy of the .tar file you want to flash in ODIN.
Connect your tab to your computer. Give it some time as your computer *might* need to download and install some Samsung drivers for the tab.
Once its done, launch ODIN. On the top left box, you should see some sort of "comp" message with numbers. This will tell you ODIN is correctly reading your tab. Now, below the boxes to the left will be some options listed as "repartition", "Autoreboot", and "F.Reset". Make you UNCHECK repartition AND f.reset. So autoreboot should be the ONLY option checked. Now, to the right you'll see some slots that say "phone", "PDA", "Bootloader", etc. ONLY click on the "PDA" slot and load your .tar file. Now click "start" and let ODIN work its magic. When the firmware flash is complete, your tab will reboot on its own.
Sent from my SPH-D700 using xda premium

Ceelos09 said:
As long as you can boot into download mode, your tab isn't dead. Now, make sure you have a copy of the .tar file you want to flash in ODIN.
Connect your tab to your computer. Give it some time as your computer *might* need to download and install some Samsung drivers for the tab.
Once its done, launch ODIN. On the top left box, you should see some sort of "comp" message with numbers. This will tell you ODIN is correctly reading your tab. Now, below the boxes to the left will be some options listed as "repartition", "Autoreboot", and "F.Reset". Make you UNCHECK repartition AND f.reset. So autoreboot should be the ONLY option checked. Now, to the right you'll see some slots that say "phone", "PDA", "Bootloader", etc. ONLY click on the "PDA" slot and load your .tar file. Now click "start" and let ODIN work its magic. When the firmware flash is complete, your tab will reboot on its own.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Just follow the advice from Ceelos09
Sent from my SGH-I717 using xda premium

Thankss a lot bro!! ..i will check if it works..

androidfreak16 said:
Thankss a lot bro!! ..i will check if it works..
Click to expand...
Click to collapse
If u have any more questions, just let me know. I'll help with what I can
Sent from my SPH-D700 using xda premium

Guess wot..my tab is working now....well i had questions but not bout tab about my new phone samsung galaxy advance i9070..i juss wanted to know if there is any clockworkmod recovery for tht..nd i cant find xda forum..

androidfreak16 said:
Guess wot..my tab is working now....well i had questions but not bout tab about my new phone samsung galaxy advance i9070..i juss wanted to know if there is any clockworkmod recovery for tht..nd i cant find xda forum..
Click to expand...
Click to collapse
Glad its working now
As for your phone, some devices dnt get their own subforum here on XDA. Maybe try using the search function? And if there is in fact no subforum for it here on XDA, a google search is bound to bring up communities on other websites that are working on development for the Galaxy Advance.
Edit: Seems that there's only a root method here on XDA, nothing more :\ Google might be your best bet for CWM bud
Sent from my SPH-D700 using xda premium

Galaxy Tab 2 hard brick

Hi guys,
i have Galaxy Tab 2 hard bricked. Can't turn it, nothing happens when trying to turn on or charge. Absolutely dead. It is dead after i've tried to enable swap on rooted device.
Please help me

Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium

Please be more brief.
What did you do?
What did you try?
When plugged in to a computer, does it recognize it?
Does ODIN recognize it?
And if all fails and you are ready to go hardmode:
https://www.youtube.com/watch?v=Ami4TQH3cmc

jyeshta001 said:
Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'

suka_narkot said:
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'
Click to expand...
Click to collapse
Hay bro..... will u tell me wants ur model....?
I wanna help u coz I know wats da pain of bricking a android.....
Sent from my GT-P3100 using xda premium

My Galaxy Tab 2 is P5100. It is rooted and works fine until i've tried to tweak swap via Swapper 2.
After i've installed this app i've tried to tweak my device and reboot it. so my tab is turned off and i can't enable it.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.

Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium

jyeshta001 said:
Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It can't be turned on in recovery/download mode so it is not visible in ODIN.

suka_narkot said:
My Galaxy Tab 2 is P5100.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.
Click to expand...
Click to collapse
????
Sent from my GT-P3100 using xda premium

what happens when you put it on charge ? probably battery is zero

Hello, I had same symptoms with my p5100 and I can't repair it. look here http://forum.xda-developers.com/showthread.php?t=1908949

jyeshta001 said:
????
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:

rraaka said:
what happens when you put it on charge ? probably battery is zero
Click to expand...
Click to collapse
No, battery was full-charged.
And i've plugged to charger and hold it with connected charger for 5 hours tonight - nothing, it is dead

riff box is the only way
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm

morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I don't see that it supports the ti omap4430.
Sent from my GT-P3113 using xda app-developers app

morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((

merka_zh said:
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((
Click to expand...
Click to collapse
Did u have any idea if you are going to repair it by Samsung how much it will cost....?

suka_narkot said:
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:
Click to expand...
Click to collapse
Unfortunately I'm sorry to say but when to get that omap message the tablet or phone IS in fact hard bricked and is not recoverable by anything here at xda. Samsung may be able to fix it but you are probably Better off just getting a new tab man because it'll cost just as much.
I know it's hard to hear that and it really sucks.
I almost bricked this tablet too and just had to give up on it for a while because it was so frustrating. I finally found the fix.
A couple months ago these guys were posting the wrong recoveries and root files and not labeling them correctly. So you have to be real careful with this stuff because s alot of them don't know what's going on.
Sent from my SGH-T889 using Tapatalk 2

adishakthi said:
Did u have any idea if you are going to repair it by Samsung how much it will cost....?
Click to expand...
Click to collapse
1. authorised Samsung center proposed me to change board for 350$
2. i have contacts with unofficial master and he proposed me to replace internal memory card - from broken Tablet for 150$
But I've been looking for another solution and when came to service for replace internal flash memory (2 weeks ago) - they didn't have it.
So I've put it on the shelf and bought another Tablet - it is not Samsung, it is repairable device )))

Plz delete.....

Recover SGS2 with broken screen

Hi,
the screen of my SGS2 is broken but I can start the device.
Samsung Kies showed it's locked and I couldn't access it.
Therefore I followed one of the recommendations in this forum:
1) Downloaded Odin
2) Downloaded Siyah-s2-v6.0b5.tar
3) Successfully flashed the device with Siyah
4) Now, I start CWM recovery console (UP-button+HOME-button+POWER-button). I see the device is connecting. No driver found.
And then I'm stuck.
Can someone with an SGS2 give me some instructions what exactly I need to press to bring the device inn USB MODE?
Thank you!
mmarkhar

Do you have the correct drivers installed?

What u goons do then .. Fix it dude unless u had encrypted or data
Sent from my GT-I9100G using xda app-developers app

nicklovell23 said:
Do you have the correct drivers installed?
Click to expand...
Click to collapse
Hi,
I do not know. Can I get the Samsung drivers from Samsung homepage? Or do you mean any otherdrivers?
mmarkhar

[q] is there any hope left for my tab?

problem began after i factory reset the tab, my tab keeps rebooting everytime either when i connecting to a wifi network/turning off the wifi/going to settings. then it freezes, and shows the samsung logo indefinitely.
when i force reboot it no longer goes into the system but only to samsung logo. i had to factory reset everytime to get into welcome screen.
the tab also have a usb connection issue as it wont get detected by the pc
odin pro is available but kinda useless since it still have to download specific files the tab for it to work
my tab is currently running on 4.1.2 P6800DXMD3 with skyhigh 3.9.1 kernel.no custom recovery
hope my english is good enough
anybody here can help me?

1. Try wipe cache in recovery and flash stock kernel.
2. Try flash full official firmware package with Odin PC. You may need to factory reset again in recovery before first boot.
Best of luck
Sent from my GT-I9500 using XDA Premium 4 mobile app

UpInTheAir said:
1. Try wipe cache in recovery and flash stock kernel.
2. Try flash full official firmware package with Odin PC. You may need to factory reset again in recovery before first boot.
Best of luck
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
1. flash stock kernel via stock recovery? is that possible?
2. my tab just wont connect to pc. it just wont get detected. this is why my tab is in a ****hole right now.

mellovicious said:
1. flash stock kernel via stock recovery? is that possible?
2. my tab just wont connect to pc. it just wont get detected. this is why my tab is in a ****hole right now.
Click to expand...
Click to collapse
You didn't say (and haven't said) it wouldn't connect in Download Mode. I didn't assume.....
- Make sure you have both the latest Samsung USB and ADB drivers installed. Uninstall old ones, reboot, install new and reboot.
- Have you checked your USB cable is ok?
If you can't enter download mode, you could be hurting.
- If all you can do is enter stock recovery, and if you had USB debugging enabled, maybe it's possible to push to system and preload etc. with ADB.
Sent from my GT-I9500 using XDA Premium 4 mobile app

UpInTheAir said:
You didn't say (and haven't said) it wouldn't connect in Download Mode. I didn't assume.....
- Make sure you have both the latest Samsung USB and ADB drivers installed. Uninstall old ones, reboot, install new and reboot.
will try~
- Have you checked your USB cable is ok?
bought a new one just for the sake of this
If you can't enter download mode, you could be hurting.
my tab can enter download mode but odin wont detect it.
- If all you can do is enter stock recovery, and if you had USB debugging enabled, maybe it's possible to push to system and preload etc. with ADB.
im gonna assume usb debugging is disabled since i factory reset the tab. so the setting must have been reset as well? but then i cant to to settings then the tab would freeze.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
im sure this is some kind of wifi bug if i just can flash the firmware it would be resolve but damn the cable really giving me a headache

my tab wont get detected by any of the pc i tried to connect it with.
i dont know what am i supposed to do anymore

mellovicious said:
my tab wont get detected by any of the pc i tried to connect it with.
i dont know what am i supposed to do anymore
Click to expand...
Click to collapse
Not sure is this will help but can you put the source files on an SD card and then use mobile odin pro to flash files then maybe you can get the tab to work. Best of luck.:fingers-crossed:

ColBill said:
Not sure is this will help but can you put the source files on an SD card and then use mobile odin pro to flash files then maybe you can get the tab to work. Best of luck.:fingers-crossed:
Click to expand...
Click to collapse
thanks for suggestion but i already resolve the prob :victory:
mobile odin still havent download the specific files for the tab so most of its features doesnt work. it doesnt even read files for sd card (not sure why)
but luckily i was able to flash custom recovery (twrp recovery) through it. so i had to push the files in via bluetooth from my phone.
well once in recovery just do all the usual stuff to flash the rom. using pac man right now. really wanted to use stock but i scared the bug would come again.
mobile odin literally saved my tab