Hey xda i have samsung tab p6200 and it is being dead..when i connect it to a charger it shows a bttery with triangle..and i can go into download mode but not recovery mode..and i m trying to flash with odin but dont know really how to flash..it freezes at setup connection and i relly dont know how to seleect files for pda bootloader etc..please sumone help me with it..can my tab be fixed to normal?? ..i wan to install indian firmware.plzzz reply..
As long as you can boot into download mode, your tab isn't dead. Now, make sure you have a copy of the .tar file you want to flash in ODIN.
Connect your tab to your computer. Give it some time as your computer *might* need to download and install some Samsung drivers for the tab.
Once its done, launch ODIN. On the top left box, you should see some sort of "comp" message with numbers. This will tell you ODIN is correctly reading your tab. Now, below the boxes to the left will be some options listed as "repartition", "Autoreboot", and "F.Reset". Make you UNCHECK repartition AND f.reset. So autoreboot should be the ONLY option checked. Now, to the right you'll see some slots that say "phone", "PDA", "Bootloader", etc. ONLY click on the "PDA" slot and load your .tar file. Now click "start" and let ODIN work its magic. When the firmware flash is complete, your tab will reboot on its own.
Sent from my SPH-D700 using xda premium
Ceelos09 said:
As long as you can boot into download mode, your tab isn't dead. Now, make sure you have a copy of the .tar file you want to flash in ODIN.
Connect your tab to your computer. Give it some time as your computer *might* need to download and install some Samsung drivers for the tab.
Once its done, launch ODIN. On the top left box, you should see some sort of "comp" message with numbers. This will tell you ODIN is correctly reading your tab. Now, below the boxes to the left will be some options listed as "repartition", "Autoreboot", and "F.Reset". Make you UNCHECK repartition AND f.reset. So autoreboot should be the ONLY option checked. Now, to the right you'll see some slots that say "phone", "PDA", "Bootloader", etc. ONLY click on the "PDA" slot and load your .tar file. Now click "start" and let ODIN work its magic. When the firmware flash is complete, your tab will reboot on its own.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Just follow the advice from Ceelos09
Sent from my SGH-I717 using xda premium
Thankss a lot bro!! ..i will check if it works..
androidfreak16 said:
Thankss a lot bro!! ..i will check if it works..
Click to expand...
Click to collapse
If u have any more questions, just let me know. I'll help with what I can
Sent from my SPH-D700 using xda premium
Guess wot..my tab is working now....well i had questions but not bout tab about my new phone samsung galaxy advance i9070..i juss wanted to know if there is any clockworkmod recovery for tht..nd i cant find xda forum..
androidfreak16 said:
Guess wot..my tab is working now....well i had questions but not bout tab about my new phone samsung galaxy advance i9070..i juss wanted to know if there is any clockworkmod recovery for tht..nd i cant find xda forum..
Click to expand...
Click to collapse
Glad its working now
As for your phone, some devices dnt get their own subforum here on XDA. Maybe try using the search function? And if there is in fact no subforum for it here on XDA, a google search is bound to bring up communities on other websites that are working on development for the Galaxy Advance.
Edit: Seems that there's only a root method here on XDA, nothing more :\ Google might be your best bet for CWM bud
Sent from my SPH-D700 using xda premium
Related
i was on ics but I planned to go back to gb my usb port had some problems so I had to put usb wire tightly to flash 2.3.6 firware from odin but it did not boot because it could not mount data that is I could not factory reset now the phne is not being recognized by the computer please is there a way of rooting from Samsung recovery so that I can go back to ics
http://forum.xda-developers.com/showthread.php?t=1822626
Heimdall>Odin
One heck of a sentence you had there!
Sent from my SGH-T959V using xda app-developers app
phone is not being recognised by the pc so how can i use heimdall
So can you not get into download mode?
I can get into the download mode but when I connect the phone there is no response from the computer
I've been trying to get people here to download mobile Odin lite and run it...send their file to chainfire so our device could get the support for it but....I guess they just don't understand what we are missing out on.
I've sent him what was asked for but if others wont jump in and do their part....I give up.
All he asks for is a .pit,a kernal,and the mobileodin.txt that is generated from the mobile Odin program
I think you need to connect your phone in download mode go into device manager and delete all the drivers under the USB section and try these steps
TwitchyEye said:
1. Go here and download heimdall suite.
https://github.com/Benjamin-Dobell/Heimdall/downloads
2. Extract and open drivers folder.
3. Connect your phone in download mode.
4. Run zadig and click show all devices, your phone should then show up in the list.
5. Click install drivers, it should say drivers successfully installed.
6. Try running the heimdall one-click of your choice.
7. Go back to step 3 and flash it again this time with bootloaders.
If it still fails, uninstall whatever USB drivers you have (one guy says he had to uninstall all of them, usually just the phone will do) reboot the pc and try again.
Actually you should go ahead and do this last thing first.
Godspeed
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Hi Carl
Did you open a thread for this?
I'm not sure it will be possible to odin straight to MTD.
sent from me
Shortbus-Driver said:
I've been trying to get people here to download mobile Odin lite and run it...send their file to chainfire so our device could get the support for it but....I guess they just don't understand what we are missing out on.
I've sent him what was asked for but if others wont jump in and do their part....I give up.
All he asks for is a .pit,a kernal,and the mobileodin.txt that is generated from the mobile Odin program
Click to expand...
Click to collapse
Why don't you do it? Lol jk. How do I do it though? And will it brick my phone?
itzik2sh said:
Hi Carl
Did you open a thread for this?
I'm not sure it will be possible to odin straight to MTD.
sent from me
Click to expand...
Click to collapse
No its in magda623 thread in general where he claims it works on his phone .
Its basically Odin on your phone so you can flash back to stock for what ever reason....whether returning back to bml from mtd or a soft brick etc. Without having to hook up to your computer.
Lol no it won't brick you it simply creates a txt file that you send to chain fire so he can see what he needs to do to make our device compatable.
guys..
I bricked my infuse.... i accidently hit partitions via Rom manager and now the phone wont boot. not even the samsung logo.. no lights no nothing... when i insert usb cable while pressing both volume rocker, the phone goes to download mode....tried odin's unbrick but keep getting failed message at either db or factory.fs step....(see screenshot).... i m in deep $hit... please help
c4capricorn said:
guys..
I bricked my infuse.... i accidently hit partitions via Rom manager and now the phone wont boot. not even the samsung logo.. no lights no nothing... when i insert usb cable while pressing both volume rocker, the phone goes to download mode....tried odin's unbrick but keep getting failed message at either db or factory.fs step....(see screenshot).... i m in deep $hit... please help
Click to expand...
Click to collapse
I'm not an expert on this, but as far as I can see from the screenshot, the Re-Partition box isn't supposed to be checked. Try fixing that and flashing again.
If you get it working get rid if ROM manager. Oh and post this in the q&a thread instead.
Sent from my SGH-I997 using xda app-developers app
Have you tried the Heimdall One Click's linked in the ISET thread?
choffman said:
Have you tried the Heimdall One Click's linked in the ISET thread?
Click to expand...
Click to collapse
No i didnt...can i hav a link to that bro?
Sent from my WT19i
c4capricorn said:
No i didnt...can i hav a link to that bro?
Sent from my WT19i
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1524081
Try that ! And don't forget to thank him ! Hold both buttons. Your gonna have to fix the drivers because heimdall uses different drivers than Odin so make sure yu fix that
Sent from my SGH-I997 using xda premium
You may need to repartition with Odin or heimdall. But to do that you need the pit file and a package with all of the partitions. that includes param.lfs dbdata.rfs factoryfs.rfs cache.rfs modem.bin and zImage.
Heimdall might also insist you use the boot loader files as well.
What ever package you are using check what's inside with 7zip or something that can handle .tar files and make sure you have all the relevant images in there before you select repartition. If that's all good and it still fails get a new USB cable. And if that fails use heimdall. its not too hard to use.
Also note that this is not a development thread. This section is more for releasing or at minimum did ussi g the development of ROMs kernels or software. Its not for help me threads. This is a q/a type thread. I'm surprised the self appointed forum police haven't badgered you to ask a mod to move it already.
clorox.bleach said:
I'm not an expert on this, but as far as I can see from the screenshot, the Re-Partition box isn't supposed to be checked. Try fixing that and flashing again.
Click to expand...
Click to collapse
Dani897 said:
You may need to repartition with Odin or heimdall. But to do that you need the pit file and a package with all of the partitions. that includes param.lfs dbdata.rfs factoryfs.rfs cache.rfs modem.bin and zImage.
Heimdall might also insist you use the boot loader files as well.
What ever package you are using check what's inside with 7zip or something that can handle .tar files and make sure you have all the relevant images in there before you select repartition. If that's all good and it still fails get a new USB cable. And if that fails use heimdall. its not too hard to use.
Click to expand...
Click to collapse
Thanks Dani...
Sir, please do not post threads of Non Dev in the Development Section. Thank you and moved.
after using hemidall one click atleast now my phone is alive....but problem is still there..when i plugin the wall charger, samsung logo comes up and then phone immediately goes into android recovery (See attachement). if i plugin the phone to pc, same thing happens.
now my question...
1) how can i install a ROM
2) how can i install a kernel
if i sound noob i m sorry but i could find answers to my question anywhere..
Please help..
and moderators.. if I am again posting in the wrong section, I m sorry but im berserk at the moment so apology in advance....
In the second post of the qkster's heimdall unbrick you will find entropys dd kernel also packed in a heimdall one-click. Flash it and wipe data, cache & dalvik from your new red cwm.
If phone still doesn't boot, repeat flashes with both one-clicks.
Sent from my SGH-I997 using xda app-developers app
c4capricorn said:
after using hemidall one click atleast now my phone is alive....but problem is still there..when i plugin the wall charger, samsung logo comes up and then phone immediately goes into android recovery (See attachement). if i plugin the phone to pc, same thing happens.
now my question...
1) how can i install a ROM
2) how can i install a kernel
if i sound noob i m sorry but i could find answers to my question anywhere..
Please help..
and moderators.. if I am again posting in the wrong section, I m sorry but im berserk at the moment so apology in advance....
Click to expand...
Click to collapse
You can find the answer in the sticky thread. It will tell you step by step.
http://forum.xda-developers.com/showthread.php?t=1514886
Sent from my SGH-I997 using xda premium
andros11 said:
In the second post of the qkster's heimdall unbrick you will find entropys dd kernel also packed in a heimdall one-click. Flash it and wipe data, cache & dalvik from your new red cwm.
If phone still doesn't boot, repeat flashes with both one-clicks.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
done this and now when i turn the phone on, it boots in to cwm recovery.....but it always boots to recovery.....when i plug it in to pc, shows 2 drives in my computer but i m unable to access the drives. updated drivers, adb everything....
c4capricorn said:
done this and now when i turn the phone on, it boots in to cwm recovery.....but it always boots to recovery.....when i plug it in to pc, shows 2 drives in my computer but i m unable to access the drives. updated drivers, adb everything....
Click to expand...
Click to collapse
Red cwm does not allow connection of USB . Do this. Odin back to stock. Reboot and when phone is on stock, root your phone flash cwm download ROM then boot in recovery then flash. What file specifically are you using to Odin?
Sent from my SGH-I997 using xda premium
coldcrush390 said:
Red cwm does not allow connection of USB . Do this. Odin back to stock. Reboot and when phone is on stock, root your phone flash cwm download ROM then boot in recovery then flash. What file specifically are you using to Odin?
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
thanks dude...odin did it...phone booted and now working... Thanks everyone for your support
c4capricorn said:
thanks dude...odin did it...phone booted and now working... Thanks everyone for your support
Click to expand...
Click to collapse
Glad I could help :thumbup:
Sent from my SGH-I997 using xda premium
Just to say it again for anyone else that reads this thread..
DONT USE ROM MANAGER!!
Almost every issue I have ever had (one was me missing a step) could be traced back to RM..
Sent from my SAMSUNG-SGH-I717 using xda premium
There should be a major thread that states no one should use ROM Manager
I agree.......for everyone out there who is new or thinkng about trying Rom Managar.... Please
DO NOT TRY ROM MANAGER........
c4capricorn said:
I agree.......for everyone out there who is new or thinkng about trying Rom Managar.... Please
DO NOT TRY ROM MANAGER........
Click to expand...
Click to collapse
Gee so I should rush out and download ROM MANAGER?
Hi how you doing!
First of all wanted to thank the entire community of developers for the effort made to us! :good::good:
I tried to return to stock my infuse with odin and I was wrong to choose the phone, then select the file pda again . The process is not complete, then turning off the phone shows me that image. I can not activate the download mode and the recovery. The pc recognizes the phone but nothing happens even odin doesn't recognize
tanks and i apologize for my bad English.
Reinstall your drivers you can flash from that screen its like download mode.Try different cords and USB ports too.Good luck.
Sent from my SGH-I997 using xda premium
thanks for the quick response! how i can reinstall my drivers? i mean... how i delete the previous drivers?
gta89 said:
thanks for the quick response! how i can reinstall my drivers? i mean... how i delete the previous drivers?
Click to expand...
Click to collapse
Download Kies from Samsung. It is big but it had the USB drivers you need.
Sent from my SGH-I997 using xda app-developers app
thanks for the answers guys, i pass the logo and get the stock room w/root. Now my problem is i cant instal CWM!!!
When I'm back to stock I Odin entropy (spelled wrong I know) kernal but then I can get into cwm then flash away.
Sent from a liquid smooth Infuse.
nobody to answer ????
Hi there
I have tab2 7.0 3113 4.1.1 OTA JR003C.P3113UECLK7
device uses JB right??
I just cant manage to install CWM through odin....it seems to start but no response...
tried single step samsung cwm root etc but NO WAY......JUST MADE ME CRAZY
can someone help to get rid of this problem !!!
would app. alot
thanks in advance
bodomar said:
nobody to answer ????
Hi there
I have tab2 7.0 3113 4.1.1 OTA JR003C.P3113UECLK7
device uses JB right??
I just cant manage to install CWM through odin....it seems to start but no response...
tried single step samsung cwm root etc but NO WAY......JUST MADE ME CRAZY
can someone help to get rid of this problem !!!
would app. alot
thanks in advance
Click to expand...
Click to collapse
ok go to your settings and under the developer option tab make sure tha usb debugging is clicked. that should allow you to install cwm.
guncrasher said:
ok go to your settings and under the developer option tab make sure tha usb debugging is clicked. that should allow you to install cwm.
Click to expand...
Click to collapse
tried it but didnt help ...
Re: [Q] How to enable mobile calls on p3105
You need triangle away to reset the flash counter to 0. You can get it (paid) in play store or for free here in xda.
Sent from my SCH-I535 using xda premium
bodomar said:
nobody to answer ????
Hi there
I have tab2 7.0 3113 4.1.1 OTA JR003C.P3113UECLK7
device uses JB right??
I just cant manage to install CWM through odin....it seems to start but no response...
tried single step samsung cwm root etc but NO WAY......JUST MADE ME CRAZY
can someone help to get rid of this problem !!!
would app. alot
thanks in advance
Click to expand...
Click to collapse
Hey there, didnt know if your problem was solved so ill give a few steps that I did after the ota 4.1.1 update
First let the device reboot and optimize. Then turn off. Hold the vol- and power hard buttons to put it in download mode.
Download cf-auto-rood from hear on xda, and odin if u need it, also I find that the samsund updater/push notify dosent go cracked out if u have triangle away...
Install kies from samsung, then stop the program through your task manager.
Plug in the gtab2 and wait for the notification that the device is identified, double check that kies is not running, start up odin and flash the cf-auto-root through, I believe the thread will give u which option to flash. Let it reboot.
If it hange at the boot do a hard reboot and plug in the power cable let it charge then boot it up.
If all goes well you'll be rooted with busybox, then install cwm through the market then flash the recovery.
Its a long process but its worked for me about 4 to 5 times after reflashing the stock tar file I got from a when the first root was done for the gtab2. Hope it helps you or anyone else...
Sent from my GT-P3113 using Tapatalk HD
sickysticky said:
Hey there, didnt know if your problem was solved so ill give a few steps that I did after the ota 4.1.1 update
First let the device reboot and optimize. Then turn off. Hold the vol- and power hard buttons to put it in download mode.
Download cf-auto-rood from hear on xda, and odin if u need it, also I find that the samsund updater/push notify dosent go cracked out if u have triangle away...
Install kies from samsung, then stop the program through your task manager.
Plug in the gtab2 and wait for the notification that the device is identified, double check that kies is not running, start up odin and flash the cf-auto-root through, I believe the thread will give u which option to flash. Let it reboot.
If it hange at the boot do a hard reboot and plug in the power cable let it charge then boot it up.
If all goes well you'll be rooted with busybox, then install cwm through the market then flash the recovery.
Its a long process but its worked for me about 4 to 5 times after reflashing the stock tar file I got from a when the first root was done for the gtab2. Hope it helps you or anyone else...
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
thanks ....
i ll give it a try next week when tab is back from holiday
Hope it helps
Sent from my GT-P3113 using Tapatalk HD
sickysticky said:
Hope it helps
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
it didnt work either ....so strange,no response
please see the photo attached...
Did u stop kies in the process manager before starting odin and after the tab is connected?
Sent from my GT-P3113 using Tapatalk HD
sickysticky said:
Did u stop kies in the process manager before starting odin and after the tab is connected?
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
thanks all finally managed after plugging and unplugging usb cable several times...
but now I have a worse problem....
after rooting the device I copied wpa_supplicant file to system/bin ,I tried to add ad-hoc support to connect to nokia e72
but while I was doing that I probably damaged some files in system/bin
now wifi is gone....device tries to open wifi but no response !!!
please advice what to do ((
I would sugest, wrtie notes on what u did, n start from scratch....
A clean filesystem can be monitored better, especially if ur modifying system files
:thumbup::beer::thumbup:
Sent from my GT-P3113 using Tapatalk HD
sickysticky said:
I would sugest, wrtie notes on what u did, n start from scratch....
A clean filesystem can be monitored better, especially if ur modifying system files
:thumbup::beer::thumbup:
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
i copied wpa file to download file then navigated to system/bin
pasted wpa file there....
after i saw it didnt work i deleted it
in system/bin i opened some files with text editor etc.....
added adb shell(by mistake) then deleted...
(
Hi,
the screen of my SGS2 is broken but I can start the device.
Samsung Kies showed it's locked and I couldn't access it.
Therefore I followed one of the recommendations in this forum:
1) Downloaded Odin
2) Downloaded Siyah-s2-v6.0b5.tar
3) Successfully flashed the device with Siyah
4) Now, I start CWM recovery console (UP-button+HOME-button+POWER-button). I see the device is connecting. No driver found.
And then I'm stuck.
Can someone with an SGS2 give me some instructions what exactly I need to press to bring the device inn USB MODE?
Thank you!
mmarkhar
Do you have the correct drivers installed?
What u goons do then .. Fix it dude unless u had encrypted or data
Sent from my GT-I9100G using xda app-developers app
nicklovell23 said:
Do you have the correct drivers installed?
Click to expand...
Click to collapse
Hi,
I do not know. Can I get the Samsung drivers from Samsung homepage? Or do you mean any otherdrivers?
mmarkhar